Raymor Bathroom Accessories

Adding the finishing touches to a Projix bathroom? The Raymor Projix Robe Hook in Brushed Nickel is a small fix that makes a real difference: one hook for a towel or robe, screwed straight to the wall. It's compact at 43mm wide and 55mm high, and stands 65mm off the wall so a thick bath towel hangs without slipping. The hook is zinc alloy in a brushed nickel finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• Single hook for a towel or robe, handy behind a door or beside the shower
• 65mm projection, so a folded bath towel hangs clear of the wall
• Zinc alloy build with a brushed nickel finish that shrugs off steam
• Brass four-point fixings, for a hook that doesn't work loose
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use a wall plug in plasterboard or tiles, and check for pipes before you drill.

Fit a couple, then match them with Projix towel rails, roll holders and shelves in the same finish.

Specifications

Construction material: Zinc
Overall length: 43 mm
Projection: 65 mm
Height: 55 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Fixing Kit
• Installation Instructions

Towels ending up on the floor because there's nowhere to hang them? The Raymor Projix Robe Hook in Chrome is a small fix that makes a real difference: one hook for a towel or robe, screwed straight to the wall. It's compact at 43mm wide and 55mm high, and stands 65mm off the wall so a thick bath towel hangs without slipping. The hook is zinc alloy in a chrome finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Single hook for a towel or robe, handy behind a door or beside the shower
• 65mm projection, so a folded bath towel hangs clear of the wall
• Zinc alloy build with a chrome finish that shrugs off steam
• Brass four-point fixings, for a hook that doesn't work loose
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use a wall plug in plasterboard or tiles, and check for pipes before you drill.

Fit a couple, then match them with Projix towel rails, roll holders and shelves in the same finish.

Specifications

Construction material: Zinc Die Cast
Overall length: 43 mm
Projection: 65 mm
Height: 55 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Robe hook
• Installation Instructions

Bath sheets too big for the rail you've got? The Raymor Projix Single Towel Rail 930mm in Chrome is the long version, with a 930mm bar that takes a bath sheet or two hand towels side by side. Like the rest of the Projix accessories it's zinc alloy with a chrome finish, sits 75mm off the wall and mounts on brass four-point fixings, so it's up to commercial bathrooms as well as home ones. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• 930mm bar, so a bath sheet hangs flat instead of doubled over
• Zinc alloy construction that won't warp in a steamy room
• Chrome finish to match Projix pin lever taps, showers and accessories
• Brass four-point fixings for a rail that stays tight on the wall, rated for commercial use
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Four wall fixings, 75mm projection. Over a longer span it pays to hit at least one stud, so check before you drill or ask your handyman.

Match it with the Projix 630mm single rail, double rails, glass shelf and roll holder.

Specifications

Construction material: Zinc Die Cast
Overall length: 930 mm
Projection: 75 mm
Height: 44 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Old towel rail gone dull, loose or just plain ugly? The Raymor Projix Single Towel Rail 630mm in Chrome is a straight, no-nonsense rail for one bath towel, sized to suit most family bathrooms and ensuites. It projects 75mm from the wall, enough for a towel to hang and dry without rubbing the paint. The body is zinc alloy under a chrome finish, on brass four-point fixings so it doesn't wobble, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• 630mm long, which fits a standard bath towel folded in half
• 75mm projection, so towels hang clear of the wall and dry faster
• Zinc alloy body with a chrome finish that wipes clean and matches Projix tapware
• Brass four-point fixings that hold firm at home or in commercial bathrooms
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with four fixing points. Screw into studs where you can, or use the right plugs for plasterboard or tiles.

Projix also does a 930mm single rail, double rails, robe hooks and roll holders in the same three finishes.

Specifications

Construction material: Zinc Die Cast
Overall length: 630 mm
Projection: 75 mm
Height: 44 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Hand towel always ending up on the vanity? The Raymor Projix Towel Ring in Chrome hangs a hand towel beside the basin where you can actually reach it. It's a zinc alloy ring with a bright chrome finish, fixed to the wall with brass four-point fixings, and it's rated for commercial use so it copes with a busy family bathroom. At 175mm wide and 190mm high it stands 65mm off the wall, enough for a folded hand towel to hang clear. Installation instructions come in the box. Backed by a 5 year warranty on parts and 1 year on the finish and labour.

• Holds a hand towel next to the basin, so it dries between uses instead of sitting in a heap
• Zinc alloy ring with a bright chrome finish that wipes clean with a damp cloth
• Brass four-point fixings, which keep the ring tight to the wall through years of tugging
• Rated for commercial use, so it's more than up to a family bathroom
• 5 year warranty on parts, 1 year on the finish and labour

Wall mounted with four fixing points. Use proper anchors in tiles or plasterboard, and check for pipes before you drill.

Pair it with Projix towel rails, robe hooks and pin lever tapware in Chrome.

Specifications

Construction material: Zinc Die Cast
Overall length: 175 mm
Projection: 65 mm
Height: 190 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Towel ring
• Installation Instructions

Roll holder come away from the wall for the last time? The Raymor Projix Toilet Roll Holder in Chrome is a straightforward wall-mounted holder for a single roll. It's 175mm wide, 98mm high and projects 65mm, so it sits close to the wall and clears a swinging door in a tight toilet. The body is zinc alloy in a chrome finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Holds a single standard roll and swaps over in seconds
• 65mm projection, which keeps it tight to the wall in a narrow toilet
• Zinc alloy body with a chrome finish that matches Projix taps, rails and hooks
• Brass four-point fixings so it stays on the wall, rated for commercial toilets
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use plugs in plasterboard or tiles, and check for pipes before you drill beside the cistern.

Pair it with the Projix toilet brush and holder, robe hook and towel rails in the same finish.

Specifications

Construction material: Zinc Die Cast
Overall length: 175 mm
Projection: 65 mm
Height: 98 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Soap sitting in a puddle on the edge of the bath? The Raymor Projix Soap Basket in Chrome is a small wall-mounted basket that keeps a bar of soap up off the wet surfaces so it drains and lasts longer. It's 125mm square and 43mm high, which suits a shower wall, above a basin or beside the bath. The basket is zinc die cast with a chrome finish that matches Projix tapware and accessories, and installation instructions are in the box. Backed by a 5 year warranty on parts and 1 year on the finish and labour.

• Open basket design, so water drains away and the soap doesn't go to mush
• 125 x 125mm footprint that fits between tiles in a shower or over a basin
• Zinc die cast body under a chrome finish that suits Projix taps and rails
• 5 year warranty on parts, 1 year on the finish and labour

Wall mounted. In a shower, fix it where it won't catch the door, and check for pipes before you drill into tiles.

Goes with Projix showers, towel rails, robe hooks and glass shelves in Chrome.

Specifications

Construction material: Zinc Die Cast
Overall length: 125 mm
Projection: 125 mm
Height: 43 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Soap basket
• Installation Instructions

Sick of the plastic toilet brush that tips over every time? The Raymor Projix Toilet Brush & Holder in Chrome mounts to the wall, so the brush stays put and the floor around the pan is easy to mop. The frosted glass holder hides the brush and lifts out for a rinse, set in a zinc alloy bracket with a chrome finish. It's 115mm wide, 355mm high and projects 150mm, on brass four-point fixings, rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Wall mounted, so the brush isn't kicked over and the floor stays clear for cleaning
• Frosted glass holder that hides the brush head and lifts out to rinse
• Zinc alloy bracket in a chrome finish to match Projix roll holders and rails
• Brass four-point fixings, rated for commercial toilets as well as home ones
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Fix it low beside the pan where the brush is handy but out of the way. Check for pipes behind the wall before drilling.

Complete the toilet with a Projix roll holder, robe hook and towel rail in the same finish.

Specifications

Construction material: Zinc Die Cast & Frosted Glass Holder
Overall length: 115 mm
Projection: 150 mm
Height: 355 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Toilet brush and holder
• Installation Instructions

Family bathroom and never enough rail for everyone's towels? The Raymor Projix Double Towel Rail 930mm in Chrome is the biggest towel rail in the Projix range: two 930mm bars, one behind the other, with a 135mm projection so both towels get air. It takes two bath sheets or a family's worth of hand towels. The body is zinc alloy with a chrome finish, mounted on brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Two 930mm bars, which doubles the hanging space of a single rail
• 135mm projection that leaves a gap between the towels so they actually dry
• Zinc alloy body in a chrome finish that suits Projix tapware and showers
• Brass four-point fixings that cope with wet towels being yanked off every day
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted on four fixings. Loaded with wet towels it's heavier than it looks, so anchor into studs or use proper plugs, and ask your handyman if unsure.

Projix also does a 630mm double rail, single rails, robe hooks and a glass shelf in the same finishes.

Specifications

Construction material: Zinc Die Cast
Overall length: 930 mm
Projection: 135 mm
Height: 62 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Basin ledge crowded with toothbrushes, razors and bottles? The Raymor Projix Glass Shelf 610mm in Chrome gives you a 610mm run of tempered glass shelf, 157mm deep, enough for a row of full size bottles above the basin or next to the bath. Tempered glass wipes clean and won't stain, and the zinc alloy brackets carry a chrome finish to match Projix tapware. It mounts on brass four-point fixings and is rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• 610mm wide and 157mm deep, so it holds bottles, a soap dispenser and a toothbrush cup at once
• Tempered glass shelf that resists chipping and cleans with a wipe
• Zinc alloy brackets with a chrome finish that match Projix taps and rails
• Brass four-point fixings, which keep the shelf level under a load of bottles
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Go into studs or use tile-rated anchors, keep the load sensible, and ask your handyman if you're unsure about the wall.

Pair it with Projix towel rails, robe hooks, roll holders and pin lever tapware.

Specifications

Construction material: Zinc Die Cast & Tempered Glass
Overall length: 610 mm
Projection: 157 mm
Height: 54.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Dressing gown living on the floor? The Raymor Armada Robe Hook in Chrome is a single hook for a robe or towel, small enough to go behind a door or beside the shower. It's zinc alloy with a chrome finish that wipes clean and won't tarnish. At 62mm wide, 46mm high and 62mm deep it's compact, but it stands far enough off the wall for a thick bath towel. A fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• Single hook for a robe or towel, which fits behind a door or next to the shower
• Zinc alloy build with a chrome finish that shrugs off steam
• 62mm projection, so a folded bath towel hangs without slipping off
• Fixing kit and installation instructions in the box
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall or door. Use a wall plug in plasterboard or tiles and check for pipes first.

Buy a couple and match them with Armada towel rails, the roll holder, hand towel holder and tapware in Chrome.

Specifications

Construction material: Zinc
Overall length: 62 mm
Projection: 62 mm
Height: 46 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Fixing Kit
• Installation Instructions

Hand towel sharing a rail with the bath towels? The Raymor Armada Hand Towel Holder in Chrome gives a hand towel its own spot beside the basin, so it's within reach and off the vanity. It's made from zinc alloy and brass with a chrome finish that stands up to wet hands and regular wiping. The holder is 150mm wide and 50mm high, and reaches 176mm out from the wall to let the towel hang and dry. A fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• Dedicated hand towel spot beside the basin, which keeps the vanity clear
• Zinc alloy and brass construction with a chrome finish that resists tarnish
• 176mm reach from the wall, so the towel hangs freely and dries between uses
• Fixing kit and installation instructions supplied
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with the supplied fixings. Check for pipes and cables before drilling beside the basin.

Armada also does full towel rails, a roll holder, robe hooks, tapware and showers in Chrome.

Specifications

Construction material: Zinc
Overall length: 150 mm
Projection: 176 mm
Height: 50 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel holder
• Fixing Kit
• Installation Instructions

Sick of soap scum on the vanity top? The Raymor Projix Soap Holder in Brushed Nickel is a simple wall-mounted dish that keeps a bar of soap off the bench and out of the water. It's zinc die cast with a brushed nickel electroplated finish, so it won't rust in the shower and wipes clean with a cloth. The dish sits 127mm out from the wall, enough for a full size bar. A fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black.

• Wall-mounted dish, so soap drains and dries instead of turning to sludge
• Zinc die cast body that won't rust in a wet area
• Brushed nickel electroplated finish that matches Projix pin lever tapware and accessories
• 127mm projection with room for a full bar of soap
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed using the supplied kit. On tiles, drill carefully and use tile plugs. Check for pipes first.

Pair it with Projix towel rails, robe hooks, roll holders and pin lever mixers in the same finish.

Specifications

Construction material: Zinc
Overall length: 125 mm
Projection: 125 mm
Height: 43 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Soap holder
• Fixing Kit
• Installation Instructions

Want a shelf under the mirror that matches your Projix taps? The Raymor Projix Glass Shelf 610mm in Brushed Nickel gives you a 610mm run of tempered glass shelf, 157mm deep, enough for a row of full size bottles above the basin or next to the bath. Tempered glass wipes clean and won't stain, and the zinc alloy brackets carry a brushed nickel finish to match Projix tapware. It mounts on brass four-point fixings and is rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• 610mm wide and 157mm deep, so it holds bottles, a soap dispenser and a toothbrush cup at once
• Tempered glass shelf that resists chipping and cleans with a wipe
• Zinc alloy brackets with a brushed nickel finish that match Projix taps and rails
• Brass four-point fixings, which keep the shelf level under a load of bottles
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Go into studs or use tile-rated anchors, keep the load sensible, and ask your handyman if you're unsure about the wall.

Pair it with Projix towel rails, robe hooks, roll holders and pin lever tapware.

Specifications

Construction material: Zinc
Overall length: 610 mm
Projection: 157 mm
Height: 54.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Need a simple, sturdy holder that takes a standard roll? The Raymor Projix Toilet Roll Holder in Brushed Nickel is a straightforward wall-mounted holder for a single roll. It's 175mm wide, 98mm high and projects 65mm, so it sits close to the wall and clears a swinging door in a tight toilet. The body is zinc alloy in a brushed nickel finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• Holds a single standard roll and swaps over in seconds
• 65mm projection, which keeps it tight to the wall in a narrow toilet
• Zinc alloy body with a brushed nickel finish that matches Projix taps, rails and hooks
• Brass four-point fixings so it stays on the wall, rated for commercial toilets
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use plugs in plasterboard or tiles, and check for pipes before you drill beside the cistern.

Pair it with the Projix toilet brush and holder, robe hook and towel rails in the same finish.

Specifications

Construction material: Zinc
Overall length: 175 mm
Projection: 65 mm
Height: 98 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions

Finishing a toilet refit and the brush is letting it down? The Raymor Projix Toilet Brush & Holder in Brushed Nickel mounts to the wall, so the brush stays put and the floor around the pan is easy to mop. The frosted glass holder hides the brush and lifts out for a rinse, set in a zinc alloy bracket with a brushed nickel finish. It's 115mm wide, 355mm high and projects 150mm, on brass four-point fixings, rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• Wall mounted, so the brush isn't kicked over and the floor stays clear for cleaning
• Frosted glass holder that hides the brush head and lifts out to rinse
• Zinc alloy bracket in a brushed nickel finish to match Projix roll holders and rails
• Brass four-point fixings, rated for commercial toilets as well as home ones
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Fix it low beside the pan where the brush is handy but out of the way. Check for pipes behind the wall before drilling.

Complete the toilet with a Projix roll holder, robe hook and towel rail in the same finish.

Specifications

Construction material: Zinc
Overall length: 115 mm
Projection: 150 mm
Height: 355 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet brush and holder
• Fixing Kit
• Installation Instructions

Roll holder rattling loose on the wall? The Raymor Armada Toilet Roll Holder in Chrome is a straightforward holder that keeps the roll where you can reach it and makes changing it a two-second job. It's built from zinc alloy and brass with a chrome finish that wipes clean and won't tarnish. At 179mm wide, 83mm high and 62mm deep it's compact enough for a small toilet or ensuite. A fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• Simple wall-mounted holder, so the roll is always within reach
• Zinc alloy and brass construction with a chrome finish that resists tarnish
• 179mm wide with a 62mm projection, which suits a small toilet or ensuite
• Fixing kit and installation instructions included
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall. Mount it within easy reach of the seat and use tile plugs on tiled walls.

Armada also does towel rails, a hand towel holder, robe hooks, tapware and showers in Chrome.

Specifications

Construction material: Zinc
Overall length: 179 mm
Projection: 62 mm
Height: 83 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions

Fitting out a rental or an office bathroom that gets a hammering? The Raymor Projix Hand Towel Ring in Brushed Nickel takes a hand towel in a loop, so it stays put and dries beside the basin without needing a long stretch of wall. The ring is zinc alloy with a brushed nickel electroplated finish, held on with brass four-point fixings, and it's rated for commercial use as well as home bathrooms. It's 175mm wide, 190mm high and 75mm deep. Fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black.

• Ring design that holds a hand towel in place, handy where wall space is tight
• Zinc alloy body with a brushed nickel electroplated finish that wipes clean
• Brass four-point fixings, so it doesn't work loose with daily tugging
• Suits commercial fit-outs as well as home bathrooms, at 175mm wide and 190mm high
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with four fixing points. Use the right anchors for tiles or plasterboard, and check for pipes near the basin.

Match it with Projix towel rails, soap holders, robe hooks and pin lever tapware in the same finish.

Specifications

Construction material: Zinc
Overall length: 175 mm
Projection: 65 mm
Height: 190 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel ring
• Fixing Kit
• Installation Instructions

Bath sheet hanging off the end of a short rail? The Raymor Armada Single Towel Rail 824mm in Chrome is a long single bar with room for a bath sheet or two folded towels. It's a good fit above a bath or along a longer wall. Made from zinc alloy and brass with a chrome finish, it wipes clean and keeps its shine. Overall it's 824mm wide, 83mm high and stands 62mm off the wall, so towels air without the rail sticking out into the room. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• 824mm single bar, so a bath sheet hangs flat without folding twice
• Zinc alloy and brass build under a chrome finish that resists tarnish
• 62mm projection, which keeps the rail neat in a narrow bathroom
• Installation instructions included for a straightforward fit
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall. Anchor both ends into studs or use proper tile plugs, and check for pipes before you drill.

Step up to the Armada double rail if you need more hanging room, or match it with Armada hooks, holders and tapware.

Specifications

Construction material: Zinc
Overall length: 824 mm
Projection: 62 mm
Height: 83 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Two bath towels and only one rail between them? The Raymor Armada Double Towel Rail 824mm in Chrome runs two bars, so two bath towels hang flat and dry instead of stacked on top of each other. At 824mm wide it's one of the longer rails we sell, and it's 130mm high overall with a 62mm projection that keeps it neat against the wall. It's zinc alloy and brass under a chrome finish that stands up to steam. Installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• Two bars, so a pair of bath towels dry properly instead of overlapping
• 824mm wide, which gives a family bathroom plenty of hanging room
• Zinc alloy and brass construction with a chrome finish that resists steam and cleaning
• 62mm projection to keep it tidy in a narrower bathroom
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. An 824mm rail needs both ends fixed into studs or solid anchors, so ask your plumber or handyman if you're unsure.

Pair it with the Armada single rail, roll holder, robe hook, tapware and showers in Chrome.

Specifications

Construction material: Zinc
Overall length: 824 mm
Projection: 62 mm
Height: 130 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Want one wide rail instead of two short ones? The Raymor Projix Single Towel Rail 930mm in Brushed Nickel is the long version, with a 930mm bar that takes a bath sheet or two hand towels side by side. Like the rest of the Projix accessories it's zinc alloy with a brushed nickel finish, sits 75mm off the wall and mounts on brass four-point fixings, so it's up to commercial bathrooms as well as home ones. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• 930mm bar, so a bath sheet hangs flat instead of doubled over
• Zinc alloy construction that won't warp in a steamy room
• Brushed nickel finish to match Projix pin lever taps, showers and accessories
• Brass four-point fixings for a rail that stays tight on the wall, rated for commercial use
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Four wall fixings, 75mm projection. Over a longer span it pays to hit at least one stud, so check before you drill or ask your handyman.

Match it with the Projix 630mm single rail, double rails, glass shelf and roll holder.

Specifications

Construction material: Zinc
Overall length: 930 mm
Projection: 75 mm
Height: 44 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Swapping to Projix taps and want the towel rail to match? The Raymor Projix Single Towel Rail 630mm in Brushed Nickel is a straight, no-nonsense rail for one bath towel, sized to suit most family bathrooms and ensuites. It projects 75mm from the wall, enough for a towel to hang and dry without rubbing the paint. The body is zinc alloy under a brushed nickel finish, on brass four-point fixings so it doesn't wobble, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• 630mm long, which fits a standard bath towel folded in half
• 75mm projection, so towels hang clear of the wall and dry faster
• Zinc alloy body with a brushed nickel finish that wipes clean and matches Projix tapware
• Brass four-point fixings that hold firm at home or in commercial bathrooms
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with four fixing points. Screw into studs where you can, or use the right plugs for plasterboard or tiles.

Projix also does a 930mm single rail, double rails, robe hooks and roll holders in the same three finishes.

Specifications

Construction material: Zinc
Overall length: 630 mm
Projection: 75 mm
Height: 44 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Soap sliding around the edge of the basin? The Raymor Edge II Soap Dish in Chrome is a wall mounted dish that keeps a bar of soap up off the bench, beside the basin or in the shower. The squared shape matches Edge II and other angular tapware. It's solid brass with a chrome finish, 206mm wide, 24mm high and 120mm deep, so it takes a full size bar with space around it. Installation instructions come in the box. Backed by a 10 year warranty on the body, chrome finish and fittings, 1 year on seals and labour.

• Lifts the soap off the bench, so the vanity stays cleaner and the soap lasts longer
• Solid brass dish with a chrome finish that rinses clean
• 206mm wide and 120mm deep, which suits a full size bar of soap
• Squared shape that lines up with Edge II tapware and accessories
• 10 year warranty on the body, chrome finish and fittings, 1 year on seals and labour

Wall mounted. In a shower, fix into the tile with proper anchors and seal the screw holes, or ask your plumber.

Team it with Edge II towel rails, robe hooks and a roll holder in Chrome.

Specifications

Construction material: Brass
Overall length: 206 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Soap dish
• Installation Instructions

Powder room short on somewhere to dry your hands? The Raymor Boston II Hand Towel Rail in Chrome is a short single rail sized for a hand towel, for beside the vanity or in a powder room. At 239mm wide it fits the narrow wall between a basin and a door, and the 91.5mm projection lets the towel hang clear. It's solid brass with a chrome finish and a rounded bar to suit curved tapware. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black.

• 239mm rail sized for a hand towel, so it fits beside a basin where a full rail won't
• Solid brass construction that keeps its shape and won't rust
• Round bar with a chrome finish that matches Boston II tapware
• 91.5mm projection, which keeps a folded hand towel off the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Check for pipes behind the wall near the basin before drilling, or leave it to your plumber.

Pair it with a Boston II robe hook, roll holder and basin mixer in the same finish.

Specifications

Construction material: Brass
Overall length: 239 mm
Projection: 91.5 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel rail
• Installation Instructions

Bath sheet too big for the rail you've got? The Raymor Boston II Towel Rail Single 850mm in Black runs 850mm along the wall, wide enough for a bath sheet hung flat or three hand towels in a row. It's a single round bar in solid brass with a black finish, sitting 72mm from the wall so it stays out of the way in a walkway. Installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel, or at 650mm for a shorter wall.

• 850mm bar that takes a full bath sheet without folding it in half
• Solid brass build, so the long span stays straight under load
• Round profile in a black finish to match Boston II mixers and spouts
• 72mm projection that keeps the rail tight to the wall in a corridor or beside the bath
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with fixings at each end. On a span this long, aim for studs or use quality anchors in tile.

Boston II also does double rails, hand towel rails, robe hooks and roll holders in the same finish.

Specifications

Construction material: Brass
Overall length: 850 mm
Projection: 72 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Old towel rail bent from years of wet towels? The Raymor Boston II Towel Rail Single 650mm in Black is a straightforward single bar for one bath towel, or two hand towels side by side. The 650mm length suits an ensuite or the gap between shower screen and vanity, and it stands 72mm off the wall so the towel dries rather than sweats. It's solid brass under a black finish. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel, and in an 850mm length.

• 650mm single bar, the right size for one bath towel or two hand towels
• Solid brass rail that won't bow under a heavy wet towel
• Black finish on a round bar that sits well with curved tapware
• 72mm projection, so the rail hugs the wall in a tight space
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use tile anchors, and check for pipes before you drill.

Need more hanging space? Look at the Boston II double rails, or add a robe hook or two in the same finish.

Specifications

Construction material: Brass
Overall length: 650 mm
Projection: 72 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

No vanity storage and nowhere to put the hand wash? The Raymor Projix Glass Shelf 610mm in Black gives you a 610mm run of tempered glass shelf, 157mm deep, enough for a row of full size bottles above the basin or next to the bath. Tempered glass wipes clean and won't stain, and the zinc alloy brackets carry a black finish to match Projix tapware. It mounts on brass four-point fixings and is rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• 610mm wide and 157mm deep, so it holds bottles, a soap dispenser and a toothbrush cup at once
• Tempered glass shelf that resists chipping and cleans with a wipe
• Zinc alloy brackets with a black finish that match Projix taps and rails
• Brass four-point fixings, which keep the shelf level under a load of bottles
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Go into studs or use tile-rated anchors, keep the load sensible, and ask your handyman if you're unsure about the wall.

Pair it with Projix towel rails, robe hooks, roll holders and pin lever tapware.

Specifications

Construction material: Zinc
Overall length: 610 mm
Projection: 157 mm
Height: 54.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Need a spot behind the door for a dressing gown? The Raymor Projix Robe Hook in Black is a small fix that makes a real difference: one hook for a towel or robe, screwed straight to the wall. It's compact at 43mm wide and 55mm high, and stands 65mm off the wall so a thick bath towel hangs without slipping. The hook is zinc alloy in a black finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• Single hook for a towel or robe, handy behind a door or beside the shower
• 65mm projection, so a folded bath towel hangs clear of the wall
• Zinc alloy build with a black finish that shrugs off steam
• Brass four-point fixings, for a hook that doesn't work loose
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use a wall plug in plasterboard or tiles, and check for pipes before you drill.

Fit a couple, then match them with Projix towel rails, roll holders and shelves in the same finish.

Specifications

Construction material: Zinc
Overall length: 44 mm
Projection: 75 mm
Height: 55 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Fixing Kit
• Installation Instructions

Want a brush holder fixed to the wall and off the floor? The Raymor Projix Toilet Brush & Holder in Black mounts to the wall, so the brush stays put and the floor around the pan is easy to mop. The frosted glass holder hides the brush and lifts out for a rinse, set in a zinc alloy bracket with a black finish. It's 115mm wide, 355mm high and projects 150mm, on brass four-point fixings, rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• Wall mounted, so the brush isn't kicked over and the floor stays clear for cleaning
• Frosted glass holder that hides the brush head and lifts out to rinse
• Zinc alloy bracket in a black finish to match Projix roll holders and rails
• Brass four-point fixings, rated for commercial toilets as well as home ones
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Fix it low beside the pan where the brush is handy but out of the way. Check for pipes behind the wall before drilling.

Complete the toilet with a Projix roll holder, robe hook and towel rail in the same finish.

Specifications

Construction material: Zinc
Overall length: 114 mm
Projection: 142.5 mm
Height: 370 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet brush and holder
• Fixing Kit
• Installation Instructions

Soap dish cracked or gone missing from the shower? The Raymor Projix Soap Holder in Black is a simple wall-mounted dish that keeps a bar of soap off the bench and out of the water. It's zinc die cast with a black electroplated finish, so it won't rust in the shower and wipes clean with a cloth. The dish sits 127mm out from the wall, enough for a full size bar. A fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Brushed Nickel.

• Wall-mounted dish, so soap drains and dries instead of turning to sludge
• Zinc die cast body that won't rust in a wet area
• Black electroplated finish that matches Projix pin lever tapware and accessories
• 127mm projection with room for a full bar of soap
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed using the supplied kit. On tiles, drill carefully and use tile plugs. Check for pipes first.

Pair it with Projix towel rails, robe hooks, roll holders and pin lever mixers in the same finish.

Specifications

Construction material: Zinc
Overall length: 130 mm
Projection: 127 mm
Height: 48 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Soap holder
• Fixing Kit
• Installation Instructions

Hand towel forever falling off a short rail? The Raymor Projix Hand Towel Ring in Black takes a hand towel in a loop, so it stays put and dries beside the basin without needing a long stretch of wall. The ring is zinc alloy with a black electroplated finish, held on with brass four-point fixings, and it's rated for commercial use as well as home bathrooms. It's 175mm wide, 190mm high and 75mm deep. Fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Brushed Nickel.

• Ring design that holds a hand towel in place, handy where wall space is tight
• Zinc alloy body with a black electroplated finish that wipes clean
• Brass four-point fixings, so it doesn't work loose with daily tugging
• Suits commercial fit-outs as well as home bathrooms, at 175mm wide and 190mm high
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with four fixing points. Use the right anchors for tiles or plasterboard, and check for pipes near the basin.

Match it with Projix towel rails, soap holders, robe hooks and pin lever tapware in the same finish.

Specifications

Construction material: Zinc
Overall length: 175 mm
Projection: 75 mm
Height: 190 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel ring
• Fixing Kit
• Installation Instructions

Renovating the loo and want the roll holder to match the taps? The Raymor Projix Toilet Roll Holder in Black is a straightforward wall-mounted holder for a single roll. It's 175mm wide, 98mm high and projects 65mm, so it sits close to the wall and clears a swinging door in a tight toilet. The body is zinc alloy in a black finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• Holds a single standard roll and swaps over in seconds
• 65mm projection, which keeps it tight to the wall in a narrow toilet
• Zinc alloy body with a black finish that matches Projix taps, rails and hooks
• Brass four-point fixings so it stays on the wall, rated for commercial toilets
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use plugs in plasterboard or tiles, and check for pipes before you drill beside the cistern.

Pair it with the Projix toilet brush and holder, robe hook and towel rails in the same finish.

Specifications

Construction material: Zinc
Overall length: 160 mm
Projection: 75 mm
Height: 98 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions