1500mm Baths

Bath tucked into a corner and nothing standard fits? The Raymor Alpha Back to Wall Corner Bath in White is shaped to sit in a corner, so it hugs two walls without wasting floor. Choose 1500mm for a compact room or 1700mm for a full length soak, then pick left hand or right hand to suit which wall the long side runs along. Both sizes are 800mm wide and 610mm high and sit on adjustable self supporting feet with the plumbing through the floor, so there's no hob to build. Waste is in the centre, and there's no overflow. Plug and waste is not included, so add one to your order. Made in China, and backed by a 10 year warranty on the bath and 1 year on labour.

• Corner shape that sits hard against two walls, so it works where a straight bath won't
• Two lengths, 1500mm or 1700mm, both 800mm wide and 610mm high
• Left hand or right hand in each size, so the long side lands on the right wall
• Adjustable self supporting feet, which let your plumber level it on the day
• Centre waste with no overflow, so bring the floor waste to the middle
• Plug and waste sold separately, so grab one with the bath
• Covered by a 10 year warranty on the bath and 1 year on labour

Stand in the corner facing out: if the long side runs to your left, you want left hand. Check the 1700mm will get through the door, and ask your plumber if you're not sure about the floor waste position.

Add a Raymor bath pop-up plug and waste and finish it with Alpha tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1500mm or 1700mm
Width: 800mm
Height: 610 mm
Waste location: Centre
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: China
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Corner Bath
• Installation instructions

Planning a tiled bath hob? The Decina Adatto Inset Bath drops into a tiled hob, and because it's an island design it can go almost anywhere in the room. It comes in 1510mm and 1650mm lengths. There's extra depth so you can fully recline, with arm rests that sweep round from the shoulders and lumbar support behind your back. The acrylic is white, sanitary grade and naturally slip resistant, and the rim is reinforced with steel rod over a double reinforced base. Self-supporting feet make installation easier, and with the bath tiled in, there's no gap behind it for dust. The tile bead strip and the plug and waste aren't included, and a pop-down waste is the recommended pick.

• Inset island design that sits in a tiled hob and shows off your tiles
• Two lengths, 1510mm and 1650mm, to suit the hob you build
• Extra depth with sweeping arm rests and lumbar support for a proper recline
• Sanitary-grade white acrylic that's naturally slip resistant underfoot
• Steel rod reinforced rim and double reinforced base for a solid feel
• Self-supporting feet that make installation simpler for your builder
• Add the optional Sia headrest, in black or white, for extra comfort

You'll need a tile bead strip and a bath waste as well; a pop-down waste is recommended for safety and easy servicing. Frame the hob to suit the length you choose.

Add a pop-down bath waste and a wall or hob mounted bath mixer to finish it.

What's In The Box

• Bath
• Decina Adatto Inset Bath in White

Warranty

Decina products are covered by warranties of up to 10 Years*

Decina products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Baths – 10 Years
• Parts – 1 Year

Showers

• Shower screens – 7 Years
• Shower bases – 10 Years

Toilets

• Toilet suites (cisterns and pans) – 10 Year replacement product warranty and 1 Year parts and labour
• Seat, lid, seals & valves – 1 Year replacement warranty only

To make a warranty claim please visit the Decina Warranty Claim page for assistance.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps

• Wastes & traps – 1 Year

For After Sales & Service enquiries you can contact Decina directly on 07 3271 1944 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Restoring a period home or after a classic freestanding bath? The Fienza Claw Foot Bath with Overflow and Chrome Feet has a traditional slipper shape and a roll-top edge, standing on chrome claw feet. It's freestanding, so it doesn't need to go against a wall, and it comes in 1500mm or 1700mm lengths to suit your room. The gloss white shell is sanitary-grade Lucite PMMA acrylic, UV stabilised to help stop it yellowing over time. Inside, a steel support frame and adjustable steel legs keep it stable and level. A chrome overflow and a chrome plug and waste are included, so there's less to source. The acrylic shell carries a 10 year warranty, and the legs and frame have 5 years.

• Traditional slipper shape with a roll-top edge, a natural fit for period homes
• Chrome claw feet for the classic freestanding look
• Available in 1500mm and 1700mm lengths, so you can size it to the room
• Gloss white sanitary-grade acrylic, UV stabilised to help resist yellowing
• Steel frame and adjustable legs for a level, steady bath
• Chrome overflow, plug and waste in the box, so there's nothing extra to buy for the drain
• 10 year warranty on the acrylic shell and 5 years on the legs and frame

Freestanding baths need the waste and supply planned before the floor goes down, so talk to your plumber early.

Pair it with a floor mounted bath mixer or a set of wall taps in chrome.

What's In The Box

• Bath
• Fienza Claw Foot Bath with Overflow (1500mm or 1700mm)
• Chrome Feet
• Waste
• Chrome Plug and Waste

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Building a tiled hob and need a bath to drop in? The Decina Turin Inset Bath is made to sit inside a tiled hob. Set it up as an island and it can go anywhere in the room, with your tile choice on show all round. Inside, you get the comfortable shape of an oval bath, while the outer edge stays a simple rectangle to save space. It suits a range of bathers and room sizes. The bath is sanitary grade acrylic with a steel rod reinforced rim and a double reinforced base, so it feels solid underfoot. This listing comes in the 1675mm size, in white. The plug and waste aren't included, and we suggest a pop-down bath waste for its safety and easy servicing. Optional SIA headrests are available in black or white.

• Inset design for a tiled hob, including island layouts away from the walls
• Oval-style bathing space inside a rectangular outline that saves room
• Steel rod reinforced rim, so the edge stays rigid
• Double reinforced base for a solid feel when you step in
• Sanitary grade acrylic made for years of everyday use
• 1675mm size in white
• Plug and waste not included, so add a pop-down bath waste to your order

Your builder will frame and tile the hob to suit the bath, so have the exact dimensions from the spec sheet before work starts. Ask your plumber to set the waste position early.

Browse our pop-down bath wastes and bath spouts to finish the install.

What's In The Box

• Bath
• Decina Turin Inset Bath in white

Warranty

Decina products are covered by warranties of up to 10 Years*

Decina products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Baths – 10 Years
• Parts – 1 Year

Showers

• Shower screens – 7 Years
• Shower bases – 10 Years

Toilets

• Toilet suites (cisterns and pans) – 10 Year replacement product warranty and 1 Year parts and labour
• Seat, lid, seals & valves – 1 Year replacement warranty only

To make a warranty claim please visit the Decina Warranty Claim page for assistance.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps

• Wastes & traps – 1 Year

For After Sales & Service enquiries you can contact Decina directly on 07 3271 1944 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Pulling out a tired old bath and starting fresh? The Caroma Stirling Steel Bath is a practical drop-in bath for a built-in installation, and a sound pick for an investment property or holiday rental. It measures 1525mm L x 770mm W x 330mm D, with a generous base and plenty of width for a proper soak. The steel shell is strong and won't flex or bend. It's finished in a hygienic porcelain enamel that resists scratches and stains, so it keeps looking good and working well for years. A four-tile flange lets you position the bath tight against the wall and tile over the flange, which gives you a seal that keeps water and dust out.

• Steel shell construction that doesn't flex or bend, giving you a solid, reliable bath underfoot.
• Porcelain enamel finish is scratch and stain resistant, so it stays hygienic and easy to look after.
• Tile flange design suits a traditional bathroom layout and creates a water and dust tight seal once tiled over.
• No gaps behind the bath for dust to collect, which makes cleaning simple.
• Dimensions of 1525mm L x 770mm W x 330mm D suit a standard alcove, offering good width and depth for a comfortable soak.
• Cost-effective choice that delivers quality you can trust at a fair price.

Plug and waste are not included, so don't get to the end of the job and find yourself short. Australian building codes require fully removable bath wastes in some situations, so we recommend a Pop-Down waste and a chat with your plumber before you order.

What's In The Box

Downloads

Download the specification sheet below:

Caroma Stirling Steel Bath

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Small bathroom, and you still want a proper soak? The Decina Shenseki Compact Inset Bath is built for exactly that. It drops into a surround or hob, and the design keeps a generous internal depth, so you're not trading comfort for floor space. Two lengths are up for grabs, 1395mm and 1515mm, so you can match it to the room you've got. It's made from white sanitary grade acrylic with natural slip resistance, built to hold up over years of use. The rim is reinforced with a steel rod and the base is double reinforced, which adds strength where a bath needs it most. Clean, simple lines suit a straightforward, minimal bathroom.

• Two lengths, 1395mm and 1515mm, so you can size it to a compact space
• White sanitary grade acrylic construction that lasts and offers natural slip resistance
• Steel rod reinforced rim for added strength around the edge
• Double reinforced bath base for solid, long-term support
• Good internal depth for a proper bathing experience despite the compact footprint
• Optional Fiore headrests in black or white, for those long soaks where you lose track of time

We recommend a Pop-Down waste for its safety, service and maintenance benefits. Note that Australian building codes require fully removable bath wastes in some situations, so check with your plumber before you buy.

What's In The Box

Downloads

Download the specification sheet below:

Decina Shenseki Compact Inset Bath

Download the installation instructions below:

Decina Shenseki Compact Inset Bath

Warranty

Decina products are covered by warranties of up to 10 Years*

Decina products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Baths – 10 Years
• Parts – 1 Year

Showers

• Shower screens – 7 Years
• Shower bases – 10 Years

Toilets

• Toilet suites (cisterns and pans) – 10 Year replacement product warranty and 1 Year parts and labour
• Seat, lid, seals & valves – 1 Year replacement warranty only

To make a warranty claim please visit the Decina Warranty Claim page for assistance.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps

• Wastes & traps – 1 Year

For After Sales & Service enquiries you can contact Decina directly on 07 3271 1944 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want the freestanding look without giving up half the floor? The Caroma Liano Freestanding Bath has flat sides, so you can push it against a wall or tuck it into a corner where a fully freestanding tub simply won't go. The bold, square shape gives your bathroom a clean, modern edge, and the material construction helps hold heat through a long soak. Pick from 1400mm, 1525mm and 1675mm lengths to suit the space you've got. The ergonomic shape supports a comfortable lie-back position, and there are fewer hard-to-reach gaps, which makes cleaning quicker. A proper centrepiece that earns its spot.

• Flat sides let you install it against a wall or corner, so you save floor space in smaller rooms
• Choose from 1400mm, 1525mm and 1675mm lengths to suit your layout
• Square-shaped design for a bold, contemporary look
• Freestanding form works as a genuine focal point in the bathroom
• No overflow, keeping the lines clean and simple
• Plug and waste are not included, so you'll need to add one separately. Pop-Down wastes are recommended for baths for their safety, servicing and maintenance

Australian building codes require fully removable bath wastes in some situations, so check with your plumber before you buy to make sure you choose the right waste.

Team it with the matching Liano basins, toilet suites, tapware and accessories to finish the look.

Specifications

Construction material: Acrylic
Surface finish: White
Overflow: No Overflow
Plug and waste: Sold separately
Inner depth: 440mm
Height: 560mm
Length: 1400mm / 1525mm / 1675mm
Capacity: 250L / 305L / 360L
Depth: 700mm
Waste location: End
Warranty: 20 years

What's In The Box

Downloads

Download the specification sheet below:
Caroma Liano Freestanding Bath 1400mm / 1525mm
Caroma Liano Freestanding Bath 1675mm

Download the installation instructions below:
Caroma Liano Freestanding Bath

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fancy a bath that sits proud in the middle of the room? The Caroma Newbury Island Bath 1525mm and 1675mm is a drop-in bath, built to sit inside a tiled hob, so you can put it wherever it works best in your bathroom. Because the surround is tiled, your tile choice does the talking while the bath sits neatly inset. It's made from quality sanitary grade acrylic that holds up over years of use. Two lengths are up for grabs, 1525mm and 1675mm, so you can pick the one that fits your room and keep the space feeling open. A solid pick for a new bathroom or a tired old bath that's had its day.

• Island design inset into a tiled hob, so it can go anywhere in the room and become a genuine feature.
• Sanitary grade acrylic construction that stands up to daily use and lasts.
• Two sizes, 1525mm and 1675mm, to suit both compact and larger bathrooms.
• Tiled surround lets you highlight your own tile selection for a finished look.
• Plug and waste not included, so you can match the right waste to your setup.

We recommend a Pop-Down waste for its safety, servicing and maintenance benefits. Note that Australian building codes require fully removable bath wastes in some situations, so check with your plumber before you buy.

What's In The Box

Downloads

Download the installation instructions below:

Caroma Newbury Island Bath 1525mm and 1675mm

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Setting a bath into a tiled hob? The Caroma Luna Four Tile Flange Bath is built for exactly that job, so it suits a straight swap of an old tub or a new bathroom from scratch. The four tile flange lets you drop it into a tiled hob, which means you can position it as an inset 'island' anywhere in the room. The curves are soft and understated, so it sits happily in a pared-back bathroom or a busy family one. The shell is quality sanitary grade acrylic that stands up to daily use, finished in white with natural slip resistance. Comes in 1525mm or 1675mm lengths. Measure twice, order once.

• Inset island design drops into a tiled hob, which lets you place the bath where it works best and show off your tile choice
• Made from quality sanitary grade acrylic that lasts, so it holds up well over years of use
• White sanitary grade acrylic with natural slip resistance for safer, more comfortable use
• Available in 1525mm or 1675mm lengths to match your room and layout
• No gaps behind the bath means dust can't collect back there, making it easy to keep clean
• Plug and waste not included, so factor that into your order. Pop-Down wastes are a good pick for baths thanks to their safety, service and easy maintenance

Australian building codes require fully removable bath wastes in some situations, so it's worth talking to your plumber before you buy.

Team it with the matching Luna collection to complete the look.

What's In The Box

Downloads

Download the installation instructions below:

Caroma Luna Four Tile Flange Bath

Download the specification sheet below:

Caroma Luna Four Tile Flange Bath

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing a tired bath, or fitting out a rental or holiday place? The Caroma Maxton Four Tile Flange Bath is built for a traditional built-in recess. All four sides have a tile flange, so the bath sits hard against your wall and the tiles finish over the flange for a water and dust tight seal. The shape is clean and contemporary, with integrated armrests so there's somewhere sensible to rest your elbows while you soak. It's made from quality sanitary grade acrylic that stands up to years of everyday use and holds its looks. Pick from 1525mm or 1675mm lengths to suit your space.

• Four tile flange design lets the bath sit right up against the wall and be tiled over the flange, creating a water and dust tight seal that suits a traditional bathroom layout
• Comes in 1525mm or 1675mm lengths, so you can match the size to your existing recess
• Sanitary grade acrylic construction that lasts the test of time and keeps its finish
• Integrated armrests built into the design for added comfort
• Great value option that works well for a sensible renovation or a rental fit-out

Plug and waste aren't included. A Pop-Down waste is a good pick for its safety, servicing and maintenance benefits, though note that Australian building codes require fully removable bath wastes in some situations, so check with your plumber before you buy.

What's In The Box

Downloads

Download the installation instructions below:

Caroma Maxton Four Tile Flange Bath

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a spa bath, but not a lot of floor space to give it? The Decina Shenseki 1395/1515 Dolce Vita 16-Jet Spa Bath is built for exactly that. It's an inset bath, so it drops into a hob or surround with a tile bead for a neat finish. The footprint is compact, but the internal depth still gives you a proper, comfortable soak. All 16 jets run off the 750 watt TriFlo Eco Pump, and you handle power and heat from the Spa Key remote. No leaning out of the water to reach a switch. A base support frame sits behind the shell for a solid, stable install. Decina backs the shell with a 10 year warranty, so you can buy with confidence.

• 16 jets deliver a full-body massage in a bath built to suit a smaller space
• 750 watt TriFlo Eco Pump for steady, efficient performance
• C-Lenda flush finger tip adjustable jets and air controls, so you can fine-tune the flow to suit you
• Spa Key remote handles power and heat control without fuss
• Inset design with tile bead sits into your surround for a clean, built-in look
• Base support frame keeps the bath stable, which makes installation straightforward for your plumber
• 10 year warranty on the spa bath shell, so it's quality you can trust for the long haul

Optional chrome, black or white jets with polished stainless steel trim let you match the finish to your bathroom.

A spa bath needs proper electrical and plumbing connection, so have a licensed plumber and electrician handle the install.

Specifications

Construction material: Premium sanitary grade acrylic
Colour: High gloss white
Length: 1395mm / 1515mm
Height: 480mm / 520mm
Capacity: 137L / 192L (200mm below the bath rim)
Bath type: Inset
Heat boost pump: Triflo Eco Pump E-6131
Waste position: End
Warranty: 10 years

What's In The Box

1x Spa Bath

Downloads

Download the specification sheet below:

Decina Shenseki 1395/1515 Dolce Vita 16-Jet Spa Bath

Download the installation instructions below:

Decina Shenseki 1395/1515 Dolce Vita 16-Jet Spa Bath

Warranty

Decina products are covered by warranties of up to 10 Years*

Decina products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Baths – 10 Years
• Parts – 1 Year

Showers

• Shower screens – 7 Years
• Shower bases – 10 Years

Toilets

• Toilet suites (cisterns and pans) – 10 Year replacement product warranty and 1 Year parts and labour
• Seat, lid, seals & valves – 1 Year replacement warranty only

To make a warranty claim please visit the Decina Warranty Claim page for assistance.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps

• Wastes & traps – 1 Year

For After Sales & Service enquiries you can contact Decina directly on 07 3271 1944 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Putting in a new bath, or pulling out one that's seen better days? The Caroma Newbury Bath is a practical pick for either job, in the family bathroom or an investment property. It's built for a traditional built-in layout. The four tile flange means the bath sits hard up against the wall, and you tile over the flange for a water and dust tight seal. Clean, simple lines that suit most bathroom styles. Three lengths are up for grabs, 1525mm, 1675mm and 1800mm, so you can match it to the space you've got. The sanitary grade acrylic holds up to daily use, and there's an optional headrest or backrest if you'd rather not rest your neck on the tiles.

• Sanitary grade acrylic construction built to last the test of time, so it stands up to everyday use
• Four tile flange design suits a traditional bathroom layout, letting you position the bath against a wall and tile over the flange for a water and dust tight seal
• Available in 1525mm, 1675mm and 1800mm lengths, giving you options to fit the room
• Optional headrest or backrest lets you add comfort to suit how you like to bathe
• Great value, so it works well for a straightforward reno or a holiday rental

Plug and waste are not included. We recommend a Pop-Down waste for baths thanks to their safety, service and maintenance qualities.

Australian building codes require fully removable bath wastes in some situations, so check with your plumber before you order.

What's In The Box

Downloads

Download the installation instructions below:

Caroma Newbury Bath

Download the specification sheet below:

Caroma Newbury Bath

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fancy a bath you can actually lie back in? The Decina Adatto Contour Spa Bath is an inset spa built for a proper soak, with extra depth so you can recline fully into the water. Arm rests sweep round from the shoulder, and the moulded lumbar support cradles your back. That suits a straight swap for a tired old spa, or a new bathroom from scratch. Pick 1510mm or 1650mm to suit your space. The shell is quality sanitary grade acrylic that holds up over time, driven by a 750 watt TriFlo Eco Pump. Self-supporting feet and footlocker fittings keep the install stable and straightforward. Made to order in Australia.

• 12 spa jets deliver a reflexology massage action, so you can unwind at the end of the day
• Sensa-touch pad control keeps operation simple and clean-looking
• Sanitary grade acrylic shell resists wear and stays looking good for years
• Footlocker fittings and self-supporting feet improve stability during installation
• Moulded arm rests, head/neck and lumbar support for genuine comfort
• Black pillow headrest included, so your head's looked after too
• No gaps behind the bath, which means dust can't collect and cleaning stays easy
• Finished with a tile bead for a neat inset fit

Note: baths are not sent with a tiling flange. We recommend Pop-Down wastes for their safety, service and maintenance benefits. Australian building codes require fully removable bath wastes in some situations, so check with your plumber before you buy. The only hard part is convincing the family it's your turn.

What's In The Box

Downloads

Download the specification sheet below:

Decina Adatto Contour Spa Bath

Download the installation instructions below:

Decina Adatto Contour Spa Bath

Warranty

Decina products are covered by warranties of up to 10 Years*

Decina products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Baths – 10 Years
• Parts – 1 Year

Showers

• Shower screens – 7 Years
• Shower bases – 10 Years

Toilets

• Toilet suites (cisterns and pans) – 10 Year replacement product warranty and 1 Year parts and labour
• Seat, lid, seals & valves – 1 Year replacement warranty only

To make a warranty claim please visit the Decina Warranty Claim page for assistance.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps

• Wastes & traps – 1 Year

For After Sales & Service enquiries you can contact Decina directly on 07 3271 1944 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want the bath sitting out in the room rather than shoved against a wall? The Caroma Luna Island Bath is a freestanding-style bath built to sit inset within a tiled island hob, so you can place it wherever the room allows. That makes it a great pick for a family bathroom where the bath is the feature. It comes in 1525mm and 1675mm lengths, so measure the space before you choose. It's made from quality sanitary grade acrylic that holds up over the long haul and keeps its finish. There are no gaps behind the bath either, so dust has nowhere to gather. Your tiler gets the fun part: you just get a good soak.

• Island design inset into a tiled hob, so you can position it anywhere and let your tile choice do the talking
• Two lengths, 1525mm and 1675mm, to match the room you're working with
• Sanitary grade acrylic construction that lasts the test of time and cleans up easily
• No gaps behind the bath, which means less dust collecting and less scrubbing for you
• Soft, curved lines that settle comfortably into modern bathrooms
• Plug and waste not included, so factor that into your order

Some situations call for a fully removable bath waste under Australian building codes. Need a hand? Check with your plumber before you buy and confirm which waste suits this bath.

Team it with other pieces from the Caroma Luna collection to pull the look together.

What's In The Box

Bath
Caroma Luna Island Bath in White.
1525mm and 1675mm lengths.

Downloads

Download the installation instructions below:

Caroma Luna Island Bath

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Chasing a proper claw foot bath for a traditional bathroom? The Fienza Claw Foot Bath with Matte Black Feet is a freestanding bath built for renovators and new-build bathrooms, with a classic slipper shape and a roll-top edge. It's made from high-quality Lucite PMMA acrylic, a sanitary-grade material that's UV stabilised, so it won't yellow over time. Underneath sits an inbuilt steel support frame with adjustable steel legs to keep things level and solid. A chrome pop-up waste and a chrome overflow come included, so your plumber has the key parts on hand. The shell carries a 10 year warranty, and the adjustable legs and frame carry a 5 year warranty. Two lengths, so you can suit your space rather than the other way around.

• Freestanding claw foot design in gloss white acrylic, an easy standout piece in a traditional bathroom
• Traditional slipper shape with a roll-top edge for comfortable, classic bathing
• Sanitary-grade Lucite PMMA acrylic that's UV stabilised, so the finish stays true and doesn't yellow over the years
• Inbuilt steel support frame with adjustable steel legs for a level, stable install
• Chrome pop-up waste and chrome overflow included, saving you sourcing them separately
• Available in two lengths to fit the room you're working with
• 10 year warranty on the shell and 5 year warranty on the legs and frame, so you can buy with confidence

Australian building codes require fully removable bath wastes in some situations, so check with your plumber before you order.

What's In The Box

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Putting in a new bath, or pulling out one that's seen better days? The Caroma Vivas Anti-slip Bath is a practical pick for the main bathroom at home or a holiday rental. It's built for a traditional built-in layout, so it sits against the wall with four tile flanges you tile straight over for a watertight, dust-tight seal. The end reclines gently, which gives you somewhere comfortable to lean back. Sanitary grade acrylic holds up to daily use over the long term, and the anti-slip base adds a bit of extra footing. Choose 1525mm or 1675mm. Measure your alcove first: acrylic doesn't stretch.

• Four tile flanges let the bath tuck right against the wall and be tiled over, sealing out water and dust in a standard built-in setup.
• Sanitary grade acrylic construction that stands up to years of use.
• Anti-slip base for surer footing when you're getting in and out.
• Reclining end so you can lean back and relax.
• Available in 1525mm or 1675mm lengths to suit your space.
• Quality that lasts at a fair price, ideal for a main bathroom or an investment property.

Plug and waste are not included. We suggest a Pop-Down waste for easier maintenance and safety, though note that Australian building codes require a fully removable bath waste in some situations, so check with your plumber before you buy.

What's In The Box

Downloads

Download the installation instructions below:

Caroma Vivas Anti-slip Bath

Download the specification sheet below:

Caroma Vivas Anti-slip Bath

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Swapping out a tired old tub, or planning a new bathroom around a proper soak? The Decina Uno Contour Spa Bath is deep, clean-lined and built for comfort. It comes in 1530mm or 1700mm lengths, so you can match it to the space you have. An ergonomic lumbar support cradles your back. The steep sides give you plenty of room to stretch out. It's made from quality sanitary grade acrylic that holds up over the years, with a steel rod reinforced rim and a double reinforced base for solid, long-term use. Every Decina spa bath is made to order right here in Australia, so allow lead time when you plan your job. Your back will forgive the wait.

• Island design that insets into a tiled hob, so you can place it anywhere in the bathroom and show off your tile choice
• Choose from 1530mm or 1700mm lengths to suit your room
• 6 x flush C-Lenda centro jets and 6 x flush C-Lenda mini jets deliver a full-body spa massage
• 2 x flush C-Lenda air controls and 1 x flush C-Lenda suction keep the jet system easy to run and clean
• 1 x Sensa-Touch pad control is rim mounted for simple operation from inside the bath
• 750 watt TriFlo Eco Pump drives the system while keeping running costs sensible
• Includes a SIA headrest in black and quality sanitary grade acrylic for a finish that lasts

Australian building codes require fully removable bath wastes in some situations, and the waste is bought separately, so talk to your plumber before you order to pick the right option for your install.

What's In The Box

Downloads

Download the specification sheet below:

Decina Uno Contour Spa Bath

Download the installation instructions below:

Decina Uno Contour Spa Bath

Warranty

Decina products are covered by warranties of up to 10 Years*

Decina products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Baths – 10 Years
• Parts – 1 Year

Showers

• Shower screens – 7 Years
• Shower bases – 10 Years

Toilets

• Toilet suites (cisterns and pans) – 10 Year replacement product warranty and 1 Year parts and labour
• Seat, lid, seals & valves – 1 Year replacement warranty only

To make a warranty claim please visit the Decina Warranty Claim page for assistance.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps

• Wastes & traps – 1 Year

For After Sales & Service enquiries you can contact Decina directly on 07 3271 1944 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Tight corner to work with? A back to corner bath earns its keep. The Bao Fluted 1500mm Back to Corner Bath in Matte White tucks neatly into a corner, so you make the most of a compact bathroom, whether you're replacing a tired bath or fitting out a new build. The vertical V-Groove fluting gives the front a clean, textured look. Matte white keeps things fresh without the shine of a standard gloss bath. It's made from non-porous acrylic that's easy to keep clean, with an inbuilt steel support frame for solid, everyday use. Pick left hand or right hand to suit your layout. Backed by a 10 year warranty, so you can settle in for a long soak.

• Non-porous acrylic surface that wipes down easily and resists staining, so day-to-day cleaning stays simple
• Inbuilt steel support frame for a stable, long-lasting fit
• Adjustable steel legs, which means you can level the bath on uneven floors
• V-Groove vertical fluted design that adds texture to the front panel
• Left hand or right hand corner options to match the way your bathroom is set out
• No overflow, and plug and waste is not included, so add one to suit from the bath wastes range
• Also available in a 1700mm version if you have the space

Australian building codes require fully removable bath wastes in some situations, so check with your plumber on the right waste before you buy.

Specifications

What's In The Box

Downloads

Download the specification sheet below:
Bao Fluted 1500mm Back to Corner Bath - Matte White - Left Hand Corner
Bao Fluted 1500mm Back to Corner Bath - Matte White - Right Hand Corner
 

Warranty

Baö products are covered by a maximum 15 Year Warranty as outlined below for residential installations

Baths

10 Year replacement product

1 Year Labour

Toilet Suites, Cisterns & Pans

15 Years replacement product

2 Year replacement product or parts - valves

1 Year replacement product or parts - toilet seats

1 Year labour

Basins

5 Years replacement product

Vanities, Cabinets & Mirrors

2 Year replacement product or parts

1 Year labour

Bathroom Accessories

2 Year replacement product

Commercial Warranty is 1 Year replacement product or parts only for all products.

Baö bath products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Short on floor space but still want a proper soak? The Fienza Isabella Acrylic Corner Bath 1500 with Overflow in Gloss White is built for exactly that. The two-sided corner shape tucks into the corner and gives you back the middle of the room. At 1500 it suits compact family bathrooms and rental refreshes alike. It's made from UV stabilised premium sanitary-grade acrylic with Lucite MMA, so the gloss white holds up over the long haul. Underneath there's a built-in steel support frame and adjustable self-supporting feet, which keeps things solid even if your floor isn't perfectly level. Few bathroom floors are. The slim-edge profile keeps the look current, and there's a 10 year warranty behind it: quality you can trust at a fair price.

• Two-sided corner design fits neatly into a corner, saving valuable floor space in smaller bathrooms
• UV stabilised premium sanitary-grade acrylic with Lucite MMA keeps the surface looking good and resists yellowing over time
• Built-in overflow helps manage water levels, so you can fill and relax without worry
• Built-in steel support frame and adjustable self-supporting feet give a stable, level install on uneven floors
• Chrome pull-out/pop-up waste included, so there's one less part to source separately
• Slim-edge gloss white finish suits modern bathrooms and pairs easily with most tapware
• 10 year warranty for lasting peace of mind

Corner baths need to sit against two walls, so check your corner measurements and drainage position before ordering. Need a hand? Ask your plumber.

Specifications

• Material: Acrylic
• Capacity: 281L
• Net Weight: 48kg
• Gross weight: 56kg
• Overall length: 1500mm
• Overall width: 750mm
• Warranty: 10 years

What's In The Box

1x Corner Bath
1x Chrome pull-out/pop-up plug & waste
1x Installation instructions

Downloads

Download the specification sheet below:
Fienza Isabella Acrylic Corner Bath 1500 with Overflow Gloss White - Right Handed Corner
Fienza Isabella Acrylic Corner Bath 1500 with Overflow Gloss White - Left Handed Corner
 

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

One bathroom, one wet area, two jobs to do. The Decina Modena Bath is a shower bath made for everyday family bathrooms, so you can shower standing up and soak when the mood strikes. It runs wider and deeper than most traditional shower baths, which means more room to move. The base is double reinforced with a timber and fibreglass coating for solid, long-lasting support underfoot, and a slip resistant pattern helps keep entry and exit safe. It's made from quality sanitary grade acrylic that holds up over time, with a steel rod reinforcement rim for added strength. Available in 1205mm, 1515mm, 1650mm and 1790mm lengths to suit your space, so there's one to fit that awkward alcove.

• White sanitary grade acrylic construction with natural slip resistance, so it stays practical and hard-wearing in a busy bathroom.
• Double reinforced bath base with a timber and fibreglass coating for sturdiness that lasts.
• Steel rod reinforcement rim adds strength around the edge of the bath.
• Moulded arm rests and lumbar support make for a more comfortable soak.
• Optional black or white headrests can be added for extra comfort.
• Slip resistant pattern gives you greater safety getting in and out.
• Island design sits inset in a tiled hob, so you can place it anywhere in the bathroom and show off your tile choice.

Team it with a Cascade shower bath panel to complete the setup.

Note: the tile bead strip and plug and waste are not included. We recommend a Pop-Down waste for its safety, service and maintenance benefits, but Australian building codes require fully removable bath wastes in some situations, so check with your plumber before ordering.

What's In The Box

Downloads

Download the specification sheet below:

Decina Modena Bath

Download the installation instructions below:

Decina Modena Bath

Warranty

Decina products are covered by warranties of up to 10 Years*

Decina products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Baths – 10 Years
• Parts – 1 Year

Showers

• Shower screens – 7 Years
• Shower bases – 10 Years

Toilets

• Toilet suites (cisterns and pans) – 10 Year replacement product warranty and 1 Year parts and labour
• Seat, lid, seals & valves – 1 Year replacement warranty only

To make a warranty claim please visit the Decina Warranty Claim page for assistance.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps

• Wastes & traps – 1 Year

For After Sales & Service enquiries you can contact Decina directly on 07 3271 1944 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a freestanding bath as the hero of the room? The Fienza Claw Foot Bath with Semi-Gloss White Feet is a slipper bath that suits a period-style bathroom, or any space where you want a standalone tub front and centre. It's made from high-quality Lucite PMMA acrylic in gloss white, a sanitary-grade material that holds its shape and gives clean, crisp lines. The acrylic's UV stabilised, so it resists yellowing over time. Inside the shell sits a steel support frame with adjustable steel legs, and the classic claw feet come in a semi-gloss white finish. A chrome pop-up waste and chrome overflow are included, so your plumber has the key fittings ready to go. There's a 10 year warranty on the shell and 5 years on the adjustable legs and frame.

• Traditional roll-top slipper shape with claw feet, giving your bathroom a standout freestanding tub
• Built from Lucite PMMA sanitary-grade acrylic that's UV stabilised, so the white keeps looking fresh for years
• Inbuilt steel support frame with adjustable steel legs for a stable, level install on your floor
• Available in two lengths, so you can match the bath to the room you have
• Chrome waste and chrome overflow supplied with the bath, which cuts down on extra parts to source
• Backed by a 10 year warranty on the shell and a 5 year warranty on the legs and frame, for quality you can trust

Australian building codes require fully removable bath wastes in some situations, so check with your plumber before you buy. Filling one of these is a good excuse to stop answering the phone for an hour.

What's In The Box

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Corner baths earn their keep when floor space is tight. The Decina Natalia 1500 Back-To-Wall Corner Bath with Overflow tucks neatly into the corner, so it's a smart pick when you're replacing a bath in a smaller room or fitting out an en-suite. It sits in either the left or right corner, which means it works with the layout you've already got. The integrated overflow keeps the lines clean. It's made from sanitary grade acrylic over a full internal steel support frame with height-adjustable legs, so there's no separate hob or frame to build. That's one less job on the list, and your plumber can get it in without fuss.

• Back-to-wall corner design gives you a freestanding look while saving floor space
• Available in a left or right corner configuration to suit your bathroom
• High gloss sanitary grade acrylic that holds up well over the years
• Full internal steel frame with adjustable self-supporting feet for a solid, level install
• 2-sided tile bead and no gaps behind the bath, so there's less spots for dust to gather and it's easy to keep clean
• Centre waste position for straightforward connection

Plug and waste are not included. Pop-Down wastes are a good pick here for safety and easy maintenance. Note that Australian building codes require fully removable bath wastes in some situations, so check with your plumber before you buy.

Also available in a 1700 version.

Specifications

What's In The Box

Downloads

Warranty

Decina products are covered by warranties of up to 10 Years*

Decina products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Baths – 10 Years
• Parts – 1 Year

Showers

• Shower screens – 7 Years
• Shower bases – 10 Years

Toilets

• Toilet suites (cisterns and pans) – 10 Year replacement product warranty and 1 Year parts and labour
• Seat, lid, seals & valves – 1 Year replacement warranty only

To make a warranty claim please visit the Decina Warranty Claim page for assistance.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps

• Wastes & traps – 1 Year

For After Sales & Service enquiries you can contact Decina directly on 07 3271 1944 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want the freestanding look without losing half the floor? The Bao Elegant 1500mm Back to Corner Bath tucks neatly against two walls, so it suits new builds and replacements where placement matters. The acrylic surface holds heat well, which keeps the water warm longer during a soak. The gloss white finish and shadowline base give it a clean, considered look that works with most bathroom styles. Underneath, an inbuilt steel support frame and adjustable steel legs keep things solid and level, even over a floor that isn't quite true. Not every old house is. Backed by a 10 year warranty, it's quality you can trust for years of use.

• Non-porous acrylic surface that wipes clean easily, so day-to-day maintenance is simple
• Inbuilt steel support frame for a stable, long-lasting install
• Adjustable steel legs to help you level the bath on uneven surfaces
• Shadowline base feature and gloss white finish for a neat, modern look
• Available in Left hand or Right hand corner options to suit your layout
• No overflow fitted
• 10 year warranty for peace of mind

Plug and waste are not included: choose one from the drop-down menu or browse our full range of bath wastes. Note that Australian building codes require fully removable bath wastes in some situations, so it's worth checking with your plumber before you buy.

Also available in a 1700mm version.

Specifications

What's In The Box

Downloads

Download the specification sheet below:

Bao Elegant 1500mm Back to Corner Bath - Left Hand Corner
Bao Elegant 1500mm Back to Corner Bath - Right Hand Corner
 

Warranty

Baö products are covered by a maximum 15 Year Warranty as outlined below for residential installations

Baths

10 Year replacement product

1 Year Labour

Toilet Suites, Cisterns & Pans

15 Years replacement product

2 Year replacement product or parts - valves

1 Year replacement product or parts - toilet seats

1 Year labour

Basins

5 Years replacement product

Vanities, Cabinets & Mirrors

2 Year replacement product or parts

1 Year labour

Bathroom Accessories

2 Year replacement product

Commercial Warranty is 1 Year replacement product or parts only for all products.

Baö bath products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages