Raymor Baths

Old bath cracked, stained or just small? The Raymor Aruba Rectangle Inset Bath 1520mm in White is a straightforward swap for a tired inset bath in a family bathroom. It's a tile flange bath, so it drops into a hob and your tiler finishes over the flange on all four edges. At 1520mm long, 755mm wide and 420mm high it suits the hob most older bathrooms already have. The waste sits at the end and there's no overflow, so don't walk away with the tap running. The plug and waste isn't in the box, so add one to your order. Made in Australia from acrylic with a moulded headrest and lumbar support. Backed by a 15 year warranty on the bath and 1 year on labour.

• Inset bath with a 4 edge tile bead, so it drops into a hob and tiles in on all four sides
• 1520mm long, 755mm wide and 420mm high, which fits a standard hob without rebuilding it
• End waste position with no overflow, so check your floor waste lines up before you tile
• Moulded headrest and lumbar support for a comfortable soak, not just a quick wash
• Steel reinforced rim that keeps the edge firm under a tiled hob
• Plug and waste sold separately, so pick one up with the bath
• Made in Australia and backed by a 15 year warranty on the bath, 1 year on labour

Measure your hob opening and check where the floor waste sits before you order. Ask your plumber if you're unsure about the end waste.

Add a Raymor bath pop-up plug and waste, and finish it off with Edge II bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1520mm
Width: 755mm
Height: 420 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Hob a bit longer than the standard 1500? The Raymor Projix Inset Bath 1650mm in White fills it without going to a custom size. It drops into the hob as a tile flange bath, and the tile bead on all four edges lets your tiler seal it in properly. It's 1650mm long, 725mm wide and 380mm high, so it's on the shallower side and easy to climb into. The waste sits at the end of the bath and there's no overflow. You'll need to add a plug and waste, as it isn't in the box. Made in Australia from acrylic with a steel reinforced rim, and backed by a 15 year warranty on the bath and 1 year on labour.

• 1650mm long, 725mm wide and 380mm high, which gives extra length on a narrow footprint
• 4 edge tile bead for a hob install, so every edge is tiled and sealed
• End waste and no overflow, so check where your floor waste sits
• Steel reinforced rim, which keeps the bath from flexing in the hob
• Plug and waste sold separately, so grab one when you order
• Australian made acrylic with a 15 year warranty on the bath and 1 year on labour

Check the hob length and the doorway before you order the longer size. Your plumber can confirm the end waste works with your setup.

Match it with a Raymor bath pop-up plug and waste and Projix pin lever bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1650mm
Width: 725mm
Height: 380 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Bath past its best and you don't want to rebuild the hob? The Raymor Projix Inset Bath 1525mm in White is a simple like for like swap. It's a tile flange bath, so it drops into the hob and your tiler runs the tiles over the flange on all four edges. At 1525mm long, 725mm wide and 380mm high it's a shallower bath that's easy to step into. The waste is at the end and there's no overflow, so keep the tap in sight while it fills. The plug and waste isn't supplied, so add one to your order. It's Australian made acrylic with a steel reinforced rim, and the warranty runs 15 years on the bath with 1 year on labour.

• Inset bath with a 4 edge tile bead, so it tiles into a hob on all sides
• 1525mm long, 725mm wide and 380mm high, which suits a narrower hob
• Lower 380mm height that is easier for kids and older family members to get in and out of
• End waste with no overflow, so match it to your existing floor waste
• Steel reinforced rim to keep the edge rigid once tiled
• Plug and waste not included, so buy one with the bath
• Made in Australia, with a 15 year warranty on the bath and 1 year on labour

Measure the inside of your hob before ordering. Ask your plumber to confirm the end waste position lines up.

Add a Raymor bath pop-up plug and waste and pair it with Projix bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1525mm
Width: 725mm
Height: 380 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Want a freestanding bath but the bathroom's tight? The Raymor Alpha Back to Wall Freestanding Bath 1500mm in White gives you the freestanding look while sitting hard against the wall, so you don't lose floor space behind it and there's no gap to clean. A rear tile bead (10mm high, 8mm wide) lets your tiler check it into the wall and seal it if you want. It sits on its own adjustable self supporting feet with the plumbing through the floor. Size is 1500mm long, 800mm wide and 610mm high, with a centre waste and no overflow. The plug and waste is sold separately. Made in China from moulded acrylic, with a 10 year warranty on the bath and 1 year on labour.

• Back to wall freestanding, so you get the look without wasting floor behind the bath
• Rear tile bead of 10mm by 8mm, which lets you check it into the tiled wall for a sealed edge
• Adjustable self supporting feet, so your plumber can level it on a floor that isn't quite flat
• 1500mm long, 800mm wide, 610mm high, which suits a smaller bathroom or ensuite
• Centre waste with no overflow, so check the floor waste sits under the middle of the bath
• Plug and waste not included, so grab one with the bath
• 10 year warranty on the bath and 1 year on labour

Confirm the floor waste can be brought to the centre of the bath before you order. Ask your plumber about tiling it in or leaving it against the wall.

Add a Raymor bath pop-up plug and waste and match it with Alpha tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1500mm
Width: 800mm
Height: 610 mm
Waste location: Centre
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: China
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Back To Wall Bath
• Installation instructions

Got a longer hob to fill? The Raymor Aruba Rectangle Inset Bath 1665mm in White gives you extra stretch for a taller bather without moving to a freestanding. It drops into a hob as a tile flange bath, and your tiler beds the tiles over the flange on all four edges for a neat, sealed finish. It measures 1665mm long, 755mm wide and 420mm high. The waste is at the end and there's no overflow, so keep an eye on the tap while it fills. You'll need to buy the plug and waste separately. It's Australian made acrylic with a moulded headrest, lumbar support and a steel reinforced rim. The bath carries a 15 year warranty, with 1 year on labour.

• 1665mm long, 755mm wide, 420mm high, which gives a taller bather room to stretch out
• 4 edge tile bead for a hob install, so the tiles run over the flange and seal the edge
• End waste with no overflow, so line it up with your existing floor waste where you can
• Lumbar support and a moulded headrest built into the shape for a comfortable lean back
• Steel reinforced rim, which stops the edge flexing once it's tiled in
• Plug and waste not included, so add one to the order
• Australian made, with a 15 year warranty on the bath and 1 year on labour

Check the hob length and door access before you commit to the longer size. Your plumber can confirm the end waste position works with your floor.

Pair it with a Raymor bath pop-up plug and waste and Projix bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1665mm
Width: 755mm
Height: 420 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Second bathroom, small footprint, still want freestanding? The Raymor Winton Freestanding Bath 1500mm with Integrated Overflow in White is 1500mm long, 800mm wide and 530mm high, so it gives you the look without taking over the room. It stands on its own adjustable self supporting feet, with the waste and tapware through the floor and no hob to build. The overflow is built into the bath, which means it needs a plug and waste made for an overflow, and that's bought separately. Waste position is the centre. It's moulded acrylic made in Australia, and it's covered by a 10 year warranty on the bath and 1 year on labour.

• 1500mm long, 800mm wide and 530mm high, so it fits a smaller room but still runs deep
• Built in overflow that handles an overfilled bath before it reaches the floor
• Adjustable self supporting feet, so it sits level even if your floor doesn't
• Centre waste position for plumbing through the floor
• Plug and waste sold separately, and it has to be an overflow compatible waste
• Australian made moulded acrylic
• Bath warranted for 10 years, labour for 1 year

Check the floor waste can be brought to the centre of the bath. Ask your plumber to confirm the overflow waste before you order.

Pair it with a Raymor overflow compatible plug and waste and Winton bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1500mm
Width: 800mm
Height: 530 mm
Waste location: Centre
Overflow: Integrated overflow
Plug and waste: Not included
Country of origin: Australia
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Freestanding Bath
• Installation instructions

Room for a proper freestanding bath? The Raymor Alpha Freestanding Bath 1700mm in White is the full length version, at 1700mm long, 800mm wide and 600mm high. Being freestanding, it rests on adjustable self supporting feet with the plumbing through the floor, so your plumber levels it on site and there's no hob to build or tile. The waste is in the centre, and there's no overflow. Plug and waste is a separate purchase, so add one to your order. It's made in China from moulded acrylic and comes with installation instructions in the box. Covered by a 10 year warranty on the bath and 1 year on labour.

• 1700mm long, 800mm wide and 600mm high for a full stretch out
• Adjustable self supporting feet, which take up uneven floors without packing
• Freestanding, so it needs the waste and tapware to come through the floor
• Centre waste position and no overflow
• Plug and waste sold separately
• Moulded acrylic construction that holds heat well and cleans easily
• 10 year warranty on the bath, 1 year on labour

At 1700mm, check the bath fits through your door and around corners on the way in. Ask your plumber to confirm the floor waste position.

Add a Raymor bath pop-up plug and waste and Alpha floor mounted tapware to finish it.

Specifications

Construction material: Acrylic
Colour: White
Length: 1700mm
Width: 800mm
Height: 600 mm
Waste location: Centre
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: China
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Freestanding Bath
• Installation instructions

After a no fuss bath for the main bathroom? The Raymor Recline II Rectangle Inset Bath 1650mm in White is the longer of the two Recline sizes, at 1650mm long, 715mm wide and 380mm high. Being an inset tile flange bath, it drops into a hob and your tiler finishes the tiles over the flange on all four edges. Moulded armrests give you somewhere to rest your elbows, and the slip resistant base pattern makes stepping in a bit safer. The waste sits at the end and there's no overflow. You buy the plug and waste separately. Australian made acrylic with a steel reinforced rim, backed by a 15 year warranty on the bath and 1 year on labour.

• 1650mm long, 715mm wide and 380mm high, so a taller adult can stretch out
• 4 edge tile bead, which means it tiles into the hob on all four sides
• Slip resistant moulded base pattern for better grip underfoot
• Moulded armrests built into the acrylic for a comfortable lean
• End waste position and no overflow, so keep an eye on the fill
• Steel reinforced rim to keep the edge solid in the hob
• Plug and waste sold separately. Made in Australia with a 15 year warranty on the bath and 1 year on labour

Check your hob is long enough and that a 1650mm bath will get through the door. Ask your plumber about the end waste.

Finish it with a Raymor bath pop-up plug and waste and a Projix bath spout and wall mixer.

Specifications

Construction material: Acrylic
Colour: White
Length: 1650mm
Width: 715mm
Height: 380 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Prefer a squarer look in an inset bath? The Raymor Sigma Inset Bath 1525mm in White has rounded square lines rather than the usual soft oval. It's a tile flange bath, so it sits in a hob and tiles in on all four edges, which suits a straight replacement or a new hob build. Size is 1525mm long, 760mm wide and 450mm high, so it's a touch deeper than many baths this length. The waste is at the end and there's no overflow, so don't leave it filling unattended. Plug and waste is not in the box, so add one. Acrylic construction with a steel reinforced rim, backed by a 15 year warranty on the bath and 1 year on labour.

• Rounded square shape that suits a squarer basin and toilet without looking boxy
• 1525mm long, 760mm wide and 450mm high, which gives a deeper soak than a 380mm bath
• Inset with a 4 edge tile bead, so it drops into a hob and tiles in properly
• End waste with no overflow, so check your floor waste lines up
• Steel reinforced rim that keeps the bath rigid in the hob
• Plug and waste sold separately, so order one with the bath
• Warranty is 15 years on the bath and 1 year on labour

At 450mm high, check your hob height suits before you order. Ask your plumber about the end waste position.

Add a Raymor bath pop-up plug and waste and match it with Sigma tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1525mm
Width: 760mm
Height: 450 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Family bath copped a beating? The Raymor Recline II Rectangle Inset Bath 1510mm in White is a sensible replacement for the kids' bathroom. It's a tile flange bath that sits in a hob and tiles in on all four edges, so it goes back into the space you already have. It measures 1510mm long, 715mm wide and 380mm high, with moulded armrests and a slip resistant base pattern that helps on the way in and out. The waste is at the end and there's no overflow. Plug and waste isn't included, so add one to your order. It's Australian made acrylic with a steel reinforced rim, and you get 15 years warranty on the bath plus 1 year on labour.

• Inset design with a 4 edge tile bead, so it drops into a hob and tiles in all round
• 1510mm long, 715mm wide and 380mm high, which suits a compact family bathroom
• Moulded slip resistant base for surer footing with kids and wet feet
• Moulded armrests so you can sit back comfortably
• End waste with no overflow, so line it up with your existing floor waste
• Steel reinforced rim that holds the shape under the tiles
• Plug and waste not included, so buy one with the bath. 15 year warranty on the bath, 1 year on labour

Measure your hob opening and confirm the end waste position with your plumber before ordering.

Add a Raymor bath pop-up plug and waste and Edge II bath tapware to finish the job.

Specifications

Construction material: Acrylic
Colour: White
Length: 1510mm
Width: 715mm
Height: 380 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Planning a tiled hob with the bath rim on display? The Raymor Winton Island Bath 1700mm Centre Waste in White is built for exactly that. It's an island bath, so it sets into a hob on all four sides with the rim exposed, and you can tile the hob in whatever suits the room. Size is 1700mm long, 800mm wide and 500mm high, which is wide and deep enough for a proper soak. The waste is in the centre of the bath, so the floor waste needs to sit under the middle. No overflow, so don't wander off while it fills. Plug and waste is bought separately. It's Australian made acrylic with a steel reinforced rim, and the warranty is 10 years on the bath and 1 year on labour.

• Island bath for a hob on all four sides, with the rim left showing
• 1700mm long, 800mm wide and 500mm high, which gives real width and depth
• Centre waste, so plan the floor waste under the middle of the hob
• No overflow, which means a clean bath interior and no grille to scrub
• Steel reinforced rim that sits firm on the hob without flexing
• Plug and waste sold separately, so add one to the order
• Made in Australia with a 10 year warranty on the bath and 1 year on labour

Have the hob framed to the bath's outside size and confirm the centre waste with your plumber before the slab or floor is cut.

Add a Raymor bath pop-up plug and waste and Winton bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1700mm
Width: 800mm
Height: 500 mm
Waste location: Centre
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Island Bath
• Installation instructions

Need a longer inset bath with a bit more depth? The Raymor Sigma Inset Bath 1675mm in White runs 1675mm long, 760mm wide and 450mm high, so a taller person can lie back and still be covered. As a tile flange bath, it drops into a hob and your tiler beds the tiles over the flange on all four edges. It has the rounded square Sigma shape, which sits well with squarer basins and toilets. Waste is at the end, and there's no overflow to worry about cleaning. Plug and waste is sold separately, so pick one up with the bath. Made in Australia from acrylic with a steel reinforced rim, and covered by a 15 year warranty on the bath and 1 year on labour.

• 1675mm long, 760mm wide and 450mm high, so you get length and depth in one
• 4 edge tile bead that lets your tiler seal the bath into the hob on every side
• End waste and no overflow, so match it to your floor waste and watch the fill
• Rounded square Sigma shape that ties in with the Sigma island bath and tapware
• Steel reinforced rim to stop the edge flexing under tiles
• Plug and waste not included, so add one to your cart
• Made in Australia and warranted for 15 years on the bath, 1 year on labour

Check the hob length and your doorway width before ordering a 1675mm bath. Ask your plumber to confirm the end waste position.

Pair it with a Raymor bath pop-up plug and waste and a Sigma bath mixer.

Specifications

Construction material: Acrylic
Colour: White
Length: 1675mm
Width: 760mm
Height: 450 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Replacing a full size bath and want it to look freestanding? The Raymor Alpha Back to Wall Freestanding Bath 1700mm in White sits flush against the wall, so you keep the open look at the front and skip the awkward gap at the back. It has a rear tile bead (10mm by 8mm) so it can be tiled into the wall and sealed, or simply sit against it. Height adjustable self supporting feet mean your plumber levels it on site, with the waste running through the floor. It's 1700mm long, 800mm wide and 610mm high. The waste is in the centre and there's no overflow. Plug and waste isn't included. Moulded acrylic made in China, with a 10 year warranty on the bath and 1 year on labour.

• 1700mm long, 800mm wide and 610mm high, which gives a full length soak
• Sits hard against the wall, so no floor is lost and there's nothing to clean behind it
• Rear tile bead of 10mm by 8mm for checking into the tiled wall and sealing it
• Self supporting adjustable feet that save you building a hob
• Centre waste with no overflow, so plan the floor waste under the middle
• Plug and waste sold separately, so add one when you order
• Backed by a 10 year warranty on the bath and 1 year on labour

Check it will fit through the doorway and hallway at 1700mm long. Ask your plumber to confirm the centre waste can be plumbed through your floor.

Team it with a Raymor bath pop-up plug and waste and Alpha bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1700mm
Width: 800mm
Height: 610 mm
Waste location: Centre
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: China
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Back To Wall Bath
• Installation instructions

Worried about a freestanding bath overflowing? The Raymor Winton Freestanding Bath 1700mm with Integrated Overflow in White has the overflow built in, so it takes care of itself if the tap's left running a bit long. It's a freestanding bath on adjustable self supporting feet with the plumbing through the floor, so there's no hob to build. At 1700mm long, 800mm wide and 530mm high it's a full size soak. The waste is in the centre. Because of the overflow, it needs a plug and waste that suits an overflow, and that's sold separately. Made in Australia from moulded acrylic, with a 10 year warranty on the bath and 1 year on labour.

• Integrated overflow, so a forgotten tap drains away instead of over the rim
• Freestanding on adjustable self supporting feet, which makes levelling simple for your plumber
• 1700mm long, 800mm wide and 530mm high for a proper stretch out
• Centre waste, so the floor waste needs to come up under the middle
• Plug and waste not included, and it must be an overflow compatible waste to suit this bath
• Moulded acrylic, made in Australia
• 10 years warranty on the bath, 1 year on labour

Confirm your floor waste can be moved to the centre and that the bath fits through the door at 1700mm. Ask your plumber about the overflow connection.

Add a Raymor overflow compatible bath plug and waste and Winton floor mounted tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1700mm
Width: 800mm
Height: 530 mm
Waste location: Centre
Overflow: Integrated overflow
Plug and waste: Not included
Country of origin: Australia
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Freestanding Bath
• Installation instructions

Building a second bathroom and after a freestanding bath that won't crowd the room? The Raymor Alpha Freestanding Bath 1500mm in White is the compact one. It sits on its own adjustable self supporting feet with the plumbing coming up through the floor, so there's no hob to build and no tiling around it. It measures 1500mm long, 750mm wide and 600mm high, with the waste in the centre and no overflow. You buy the plug and waste separately, so add one to your cart. It's moulded acrylic, made in China, and covered by a 10 year warranty on the bath and 1 year on labour.

• Freestanding on adjustable self supporting feet, so your plumber can level it without a hob
• 1500mm long, 750mm wide and 600mm high, which leaves walking room in a smaller bathroom
• Centre waste, so the floor waste needs to sit under the middle of the bath
• No overflow, so don't leave it filling unattended
• Plug and waste not included, so order one with the bath
• Moulded acrylic that is light to move and easy to wipe down
• Covered for 10 years on the bath and 1 year on labour

Make sure the floor waste can be moved to the centre position before you buy. Ask your plumber to check the floor is solid enough to be drilled.

Pair it with a Raymor bath pop-up plug and waste and a floor mounted Alpha bath mixer.

Specifications

Construction material: Acrylic
Colour: White
Length: 1500mm
Width: 750mm
Height: 600 mm
Waste location: Centre
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: China
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Freestanding Bath
• Installation instructions

Building a hob and want the rim on show? The Raymor Sigma Island Bath 1675mm End Waste in White is an island bath, which means it's set into a hob on all four sides with the rim left exposed rather than tiled over. That gives you a clean, squarer edge and lets you tile the hob to suit the room. It measures 1675mm long, 750mm wide and 450mm high. The waste is at the end, not the centre, so plan the floor waste accordingly. There's no overflow. The plug and waste isn't included, so add one to your order. Australian made acrylic, steel reinforced rim, and a 15 year warranty on the bath with 1 year on labour.

• Island bath set into a hob on all four sides with the rim exposed, so no tile bead to hide
• 1675mm long, 750mm wide and 450mm high for a deeper, longer soak
• End waste position, which suits a floor waste near the tap end
• No overflow, so keep an eye on the tap while it fills
• Rounded square styling that pairs with the Sigma inset bath in a second bathroom
• Steel reinforced rim, which stays firm on the hob
• Plug and waste not included. Australian made with a 15 year warranty on the bath and 1 year on labour

Get your builder to size the hob to the bath before it's framed, and confirm the end waste with your plumber.

Add a Raymor bath pop-up plug and waste and Sigma bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1675mm
Width: 750mm
Height: 450 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Island Bath
• Installation instructions