Toilet Roll Holders

Small fitting, gets used every single day. The Nero Dolce Toilet Roll Holder in Chrome is a straightforward swap when you're updating your bathroom accessories or fitting out a new build. The soft, rounded lines suit most modern bathrooms, so it works whether you're matching an existing look or starting fresh. It's made from brass for lasting durability, with a clean chrome finish that wipes down easily. Nero Tapware products are certified to Australian standards and comply with the Australian WELS scheme, so you're getting a quality piece you can rely on. There's an industry-leading warranty behind it too, which is a fair bit of confidence for a roll holder.

• Brass construction that stands up to everyday bathroom use for years
• Rounded, modern styling that blends into a range of bathroom looks
• Chrome finish that's easy to keep clean and looking sharp
• Certified to Australian standards and WELS compliant, so it meets local requirements
• Simple to install, whether you have a go yourself or leave it to your plumber

Teamed with the matching Dolce range, your bathroom accessories stay consistent.

What's In The Box

Downloads

Download the specification sheet below:

Nero Dolce Toilet Roll Holder Chrome

Download the installation instructions below:

Nero Dolce Toilet Roll Holder Chrome

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Sick of the spare roll sitting on the cistern? The Phoenix Radii Double Toilet Roll Holder Round Plate in Chrome holds two rolls side by side on a 286mm bar, so there's always a spare in reach without a separate holder. It mounts on a round plate with twin screw fixing, which keeps it rigid when the roll gets tugged. It's metal with a chrome finish, designed in Australia, and part of the Radii accessory range that shares the same round plate across the tumbler holder and glass shelf. Phoenix covers the product and parts for 7 years. If the current holder has pulled loose or only takes one roll, this is a quick, tidy fix, and the fixings are in the box.

• Holds two rolls on a 286mm bar, so the spare is always there
• Twin screw round mounting plate that keeps it rigid
• Metal construction in chrome
• Designed in Australia, with a square plate version also made
• 77mm deep and 54mm high, which keeps it tight to the wall
• 7 year warranty on product and parts

Wall mounted with two screws. Pick a height and position you can reach from the pan before you drill.

Match it with the Radii Tumbler & Holder and Radii Glass Shelf on the same round plate.

Specifications

Construction material: Metal
Finish/coating: Chrome
Dimensions: 286 x 77 x 54 mm (W x D x H)
Country of origin: China
Warranty: 7 Year Product or Parts Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Small bathroom with room for only one fitting? The Fienza Kaya Dual Purpose Towel Rail/Toilet Roll Holder in Urban Brass does two jobs. Mount it horizontally, left or right hand, as a hand towel rail, or vertically to hold toilet rolls. It's built from zinc and stainless steel with a PVD urban brass finish and a circular cover plate. A 4-point wall mount keeps it firm, the fixings are fully concealed, and you won't need a hex key to put it up. It measures 265mm long, 78mm deep and 55mm high, with 226.5mm of hanging length for a hand towel or a couple of rolls. Fienza backs it with a 5 year warranty.

• Mounts left or right as a hand towel rail, or vertically as a toilet roll holder
• PVD urban brass finish with a circular cover plate
• 4-point wall mount that holds it firmly in place
• Fully concealed fixings for a tidy finish
• No hex key needed to install
• Zinc and stainless steel, backed by a 5 year warranty

Decide which way you'll mount it before drilling, so the fixing holes suit the job.

Match it with a towel rail and tapware from the rest of the Kaya range.

Specifications

Construction material: Stainless steel
Finish/coating: PVD
Fixing: 4-point wall mount
Overall Length: 265mm
Overall Depth: 78mm
Overall Height: 55mm
Hanging Length: 226.5mm
Warranty: 5 years

What's In The Box

• 1 x Toilet roll holder, fixing kit, installation instructions

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Toilet roll holder rusting or hanging off the wall? The Nero Celia Toilet Roll Holder in Brushed Nickel is a simple wall-mounted holder made from 304 grade stainless steel, which stands up to a damp bathroom without rusting. At 70 x 181 x 26mm it's compact, so it fits beside the toilet in a small bathroom or powder room. It's easy to install, which makes it a good quick job for a free afternoon. It's covered for 10 years. Also available in Chrome and Matte Black.

• 304 grade stainless steel, which resists rust in a steamy bathroom
• Compact 70 x 181 x 26mm size that suits small bathrooms and powder rooms
• Easy to install, so it's a quick job for a handy DIYer
• brushed nickel finish with a 10 year warranty

Check what's behind the wall before drilling, and use fixings to suit your wall type.

Match it with the Nero Celia Single Towel Rail 600mm in the same finish.

Specifications

Finish: Brushed Nickel
Material: 304 stainless steel
Dimensions (W x D x H): 70 x 181 x 26mm
Warranty: 10 years

What's In The Box

• Toilet Roll Holder

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Nothing worse than reaching for a roll that isn't there. The Nero New Mecca Toilet Roll Holder in matte black is a straightforward wall-mounted holder that keeps a spare within easy reach, and it's a tidy pick whether you're swapping out a worn one or fitting out a new bathroom. It's built from stainless steel, so it handles daily use in a busy family bathroom. The matte black finish keeps things clean and modern, and it sits happily alongside plenty of styles. There's a 10 year warranty behind it, which tells you how it's expected to hold up. Also available in Chrome, Brushed Nickel, Brushed Gold or Gun Metal.

• Stainless steel construction for durability that holds up over years of everyday use
• Wall-mounted design keeps a spare roll close at hand
• Matte black finish suits modern bathrooms and pairs easily with other tapware and accessories
• Choice of finishes: Chrome, Matte Black, Brushed Nickel, Brushed Gold or Gun Metal
• Covered by a 10 year warranty for peace of mind

Check your wall type and preferred mounting height before you start, or leave it to your plumber.

Living near the coast? Consider Nero's Zen range, made from Marine Grade Stainless Steel and available in the same finishes.

Specifications

• Construction material: 304 Stainless Steel
  
• Finish/coating: Electroplating
  
• Overall width: 160mm
  
• Height: 106.5mm
  
• Warranty: 10 years

What's In The Box

1x Mecca Toilet Roll Holder
1x Installation Instruction

Downloads

Download the specification sheet below:

Nero New Mecca Hand Toilet Roll Holder Matte Black

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Old roll holder loose on the wall? The Nero New Mecca Toilet Roll Holder in Chrome is a quick swap, and a tidy pick if you're kitting out a new bathroom. It's made from stainless steel, so it handles everyday bathroom use without complaint. The chrome finish wipes back to a bright shine with a cloth. The clean, modern shape suits most bathroom styles, which means it works just as well as a one-fixture refresh or part of a full fit-out. There's a 10 year warranty behind it too: quality you can trust at a fair price. Not the biggest job on your list, but you'll notice it every day.

• Stainless steel construction for strength that holds up to daily use
• Chrome finish that's simple to wipe clean and keeps its shine
• Simple, modern design that blends into most bathroom looks
• 10 year warranty for long-term peace of mind
• Also available in Matte Black, Brushed Nickel, Brushed Gold or Gun Metal

Living near the coast? Consider Nero's Zen range instead, which is made from marine grade stainless steel and comes in all the same colours.

Specifications

• Construction material: 304 Stainless Steel
  
• Finish/coating: Electroplating
  
• Overall width: 160mm
  
• Height: 106.5mm
  
• Warranty: 10 years

What's In The Box

1x Mecca Toilet Roll Holder
1x Installation Instruction

Downloads

Download the specification sheet below:

Nero New Mecca Hand Toilet Roll Holder Chrome

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Worn holder that's seen better days? The Nero New Mecca Toilet Roll Holder in Brushed Gold is a simple upgrade, and a tidy pick if you're fitting out a new bathroom from scratch. It mounts to the wall and keeps your toilet paper within easy reach. It's built from stainless steel, so it holds up to daily use and handles a bathroom environment. The lines are clean and modern, and the brushed gold finish adds a warm touch without shouting about it. There's a 10 year warranty behind it too. Fit it once and forget about it, which is more than you can say for the roll itself.

• Stainless steel construction that's durable and made to last through everyday use
• Modern, streamlined design that works with a wide range of bathroom styles
• Wall-mounted to keep your toilet paper handy and off the floor
• Brushed Gold finish for a warm look, with Chrome, Matte Black, Brushed Nickel and Gun Metal also available
• Covered by a 10 year warranty for peace of mind

Living near the coast? Nero's Zen range is made from marine grade stainless steel and comes in the same finishes, which is worth a look for salt-air conditions.

Specifications

• Construction material: 304 Stainless Steel
  
• Finish/coating: PVD
  
• Overall width: 160mm
  
• Height: 106.5mm
  
• Warranty: 10 years

What's In The Box

1x Mecca Toilet Roll Holder
1x Installation Instruction

Downloads

Download the specification sheet below:

Nero New Mecca Hand Toilet Roll Holder Brushed Gold

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Worn or dated holder on its way out? The Nero New Mecca Toilet Roll Holder in Gun Metal is a simple swap, and a tidy finishing touch in a new bathroom. It mounts to the wall, so your paper stays within easy reach. It's built from stainless steel, which means it takes daily use in a busy bathroom in its stride. The Gun Metal finish gives you a clean, contemporary look that works with a range of tapware and accessories. There's a 10 year warranty behind it too. Quality you can trust at a fair price, and one less thing to think about for the next decade.

• Stainless steel construction, so it holds up to everyday use and moisture over the long term
• Gun Metal finish gives a modern, understated look that suits most bathroom styles
• Wall-mounted design keeps your toilet paper handy and off the floor
• Covered by a 10 year warranty for peace of mind
• Also available in Chrome, Matte Black, Brushed Nickel and Brushed Gold

Check your wall type and mounting spot before you start, or leave it to your plumber.

Living near the coast? Nero's Zen range is made from marine grade stainless steel and comes in the same finishes.

Specifications

• Construction material: 304 Stainless Steel
  
• Finish/coating: PVD
  
• Overall width: 160mm
  
• Height: 106.5mm
  
• Warranty: 10 years

What's In The Box

1x Mecca Toilet Roll Holder
1x Installation Instruction

Downloads

Download the specification sheet below:

Nero New Mecca Hand Toilet Roll Holder Gun Metal

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Renovating the loo and want the roll holder to match the taps? The Raymor Projix Toilet Roll Holder in Black is a straightforward wall-mounted holder for a single roll. It's 175mm wide, 98mm high and projects 65mm, so it sits close to the wall and clears a swinging door in a tight toilet. The body is zinc alloy in a black finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• Holds a single standard roll and swaps over in seconds
• 65mm projection, which keeps it tight to the wall in a narrow toilet
• Zinc alloy body with a black finish that matches Projix taps, rails and hooks
• Brass four-point fixings so it stays on the wall, rated for commercial toilets
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use plugs in plasterboard or tiles, and check for pipes before you drill beside the cistern.

Pair it with the Projix toilet brush and holder, robe hook and towel rails in the same finish.

Specifications

Construction material: Zinc
Overall length: 160 mm
Projection: 75 mm
Height: 98 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions

Fitting out a new toilet and after something simple that lasts? The Raymor Boston II Toilet Roll Holder in Brushed Nickel is a single arm holder with a rounded rail, made to sit alongside curved tapware. It's solid brass under a brushed nickel finish, so it won't flex or rust in a damp toilet. At 159.5mm wide and 91.5mm deep it takes a standard roll, and swapping it is a one-handed job. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• Open arm design, so changing the roll takes one hand and no fiddling
• Solid brass body that stays rigid and won't corrode in a small, damp room
• Brushed nickel finish with a rounded rail that suits Boston II and other curved tapware
• 159.5mm wide with a 91.5mm projection, which fits a full roll without crowding the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it within easy reach of the toilet and check for pipes and cables before drilling.

Match it with Boston II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 159.5 mm
Projection: 91.5 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions

Kitting out a new ensuite and want the toilet to match the taps? The Raymor Edge II Toilet Roll Holder in Brushed Nickel is a single arm holder with a square profile, made for bathrooms with Edge II or other angular tapware. It's solid brass in a brushed nickel finish, so nothing snaps or rusts. It's 174mm wide and sits 72.5mm out from the wall, taking a standard roll you can swap with one hand. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• Single arm, so changing the roll is a one-handed job
• Solid brass body that stays firm and won't corrode in a damp toilet
• Square profile with a brushed nickel finish that lines up with Edge II tapware
• 174mm wide and 72.5mm off the wall, which keeps it neat in a narrow toilet
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it where you can reach it from the seat, and check for pipes before you drill.

Prefer somewhere to rest your phone? The Edge II Roll Holder with Shelf does that. Otherwise match this one with Edge II robe hooks and towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 206 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions

Roll holder rattling loose on the wall? The Raymor Armada Toilet Roll Holder in Chrome is a straightforward holder that keeps the roll where you can reach it and makes changing it a two-second job. It's built from zinc alloy and brass with a chrome finish that wipes clean and won't tarnish. At 179mm wide, 83mm high and 62mm deep it's compact enough for a small toilet or ensuite. A fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• Simple wall-mounted holder, so the roll is always within reach
• Zinc alloy and brass construction with a chrome finish that resists tarnish
• 179mm wide with a 62mm projection, which suits a small toilet or ensuite
• Fixing kit and installation instructions included
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall. Mount it within easy reach of the seat and use tile plugs on tiled walls.

Armada also does towel rails, a hand towel holder, robe hooks, tapware and showers in Chrome.

Specifications

Construction material: Zinc
Overall length: 179 mm
Projection: 62 mm
Height: 83 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions

Need a simple, sturdy holder that takes a standard roll? The Raymor Projix Toilet Roll Holder in Brushed Nickel is a straightforward wall-mounted holder for a single roll. It's 175mm wide, 98mm high and projects 65mm, so it sits close to the wall and clears a swinging door in a tight toilet. The body is zinc alloy in a brushed nickel finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• Holds a single standard roll and swaps over in seconds
• 65mm projection, which keeps it tight to the wall in a narrow toilet
• Zinc alloy body with a brushed nickel finish that matches Projix taps, rails and hooks
• Brass four-point fixings so it stays on the wall, rated for commercial toilets
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use plugs in plasterboard or tiles, and check for pipes before you drill beside the cistern.

Pair it with the Projix toilet brush and holder, robe hook and towel rails in the same finish.

Specifications

Construction material: Zinc
Overall length: 175 mm
Projection: 65 mm
Height: 98 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions

Swapping out the old loo fittings for something square and simple? The Raymor Edge II Toilet Roll Holder in Chrome is a single arm holder with a square profile, made for bathrooms with Edge II or other angular tapware. It's solid brass in a chrome finish, so nothing snaps or rusts. It's 174mm wide and sits 72.5mm out from the wall, taking a standard roll you can swap with one hand. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• Single arm, so changing the roll is a one-handed job
• Solid brass body that stays firm and won't corrode in a damp toilet
• Square profile with a chrome finish that lines up with Edge II tapware
• 174mm wide and 72.5mm off the wall, which keeps it neat in a narrow toilet
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it where you can reach it from the seat, and check for pipes before you drill.

Prefer somewhere to rest your phone? The Edge II Roll Holder with Shelf does that. Otherwise match this one with Edge II robe hooks and towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 174 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Roll holder come away from the wall for the last time? The Raymor Projix Toilet Roll Holder in Chrome is a straightforward wall-mounted holder for a single roll. It's 175mm wide, 98mm high and projects 65mm, so it sits close to the wall and clears a swinging door in a tight toilet. The body is zinc alloy in a chrome finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Holds a single standard roll and swaps over in seconds
• 65mm projection, which keeps it tight to the wall in a narrow toilet
• Zinc alloy body with a chrome finish that matches Projix taps, rails and hooks
• Brass four-point fixings so it stays on the wall, rated for commercial toilets
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use plugs in plasterboard or tiles, and check for pipes before you drill beside the cistern.

Pair it with the Projix toilet brush and holder, robe hook and towel rails in the same finish.

Specifications

Construction material: Zinc Die Cast
Overall length: 175 mm
Projection: 65 mm
Height: 98 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Want the loo to match the round taps in the rest of the bathroom? The Raymor Boston II Toilet Roll Holder in Chrome is a single arm holder with a rounded rail, made to sit alongside curved tapware. It's solid brass under a chrome finish, so it won't flex or rust in a damp toilet. At 159.5mm wide and 91.5mm deep it takes a standard roll, and swapping it is a one-handed job. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• Open arm design, so changing the roll takes one hand and no fiddling
• Solid brass body that stays rigid and won't corrode in a small, damp room
• Chrome finish with a rounded rail that suits Boston II and other curved tapware
• 159.5mm wide with a 91.5mm projection, which fits a full roll without crowding the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it within easy reach of the toilet and check for pipes and cables before drilling.

Match it with Boston II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 159.5 mm
Projection: 91.5 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Roll holder that's more wobble than holder? The Raymor Edge II Toilet Roll Holder in Black is a single arm holder with a square profile, made for bathrooms with Edge II or other angular tapware. It's solid brass in a black finish, so nothing snaps or rusts. It's 174mm wide and sits 72.5mm out from the wall, taking a standard roll you can swap with one hand. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• Single arm, so changing the roll is a one-handed job
• Solid brass body that stays firm and won't corrode in a damp toilet
• Square profile with a black finish that lines up with Edge II tapware
• 174mm wide and 72.5mm off the wall, which keeps it neat in a narrow toilet
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it where you can reach it from the seat, and check for pipes before you drill.

Prefer somewhere to rest your phone? The Edge II Roll Holder with Shelf does that. Otherwise match this one with Edge II robe hooks and towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 174 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Roll holder wobbling every time you reach for it? The Raymor Boston II Toilet Roll Holder in Black is a single arm holder with a rounded rail, made to sit alongside curved tapware. It's solid brass under a black finish, so it won't flex or rust in a damp toilet. At 159.5mm wide and 91.5mm deep it takes a standard roll, and swapping it is a one-handed job. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• Open arm design, so changing the roll takes one hand and no fiddling
• Solid brass body that stays rigid and won't corrode in a small, damp room
• Black finish with a rounded rail that suits Boston II and other curved tapware
• 159.5mm wide with a 91.5mm projection, which fits a full roll without crowding the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it within easy reach of the toilet and check for pipes and cables before drilling.

Match it with Boston II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 159.5 mm
Projection: 91.5 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Finishing off a toilet or ensuite and want the small stuff to match? The Raymor Edge II Toilet Roll Holder with Shelf in Brushed Nickel does two jobs in one: it holds the roll and gives you a small ledge on top for a phone or spare roll. The squared shape sits well next to square tapware. It's stainless steel with a brushed nickel finish, and at 197mm wide, 80mm high and 120mm deep it fits most walls without getting in the way. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Black.

• Roll holder and shelf in one unit, so you get somewhere to rest a phone or spare roll
• Stainless steel body that won't rust in a damp toilet or ensuite
• Brushed nickel finish that wipes clean and matches Edge II tapware and accessories
• 197mm wide with a 120mm projection, which keeps it clear of a swinging door
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Check what's behind the wall before you drill, or leave it to your plumber or handyman.

Pair it with Edge II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Stainless Steel
Overall length: 197 mm
Projection: 120 mm
Height: 80 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes

What's In The Box

• 1 x Edge Roll Holder with Shelf
• Installation Instructions

Roll holder hanging off the wall by one screw? The Raymor Edge II Toilet Roll Holder with Shelf in Black does two jobs in one: it holds the roll and gives you a small ledge on top for a phone or spare roll. The squared shape sits well next to square tapware. It's stainless steel with a black finish, and at 197mm wide, 80mm high and 120mm deep it fits most walls without getting in the way. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• Roll holder and shelf in one unit, so you get somewhere to rest a phone or spare roll
• Stainless steel body that won't rust in a damp toilet or ensuite
• Black finish that wipes clean and matches Edge II tapware and accessories
• 197mm wide with a 120mm projection, which keeps it clear of a swinging door
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Check what's behind the wall before you drill, or leave it to your plumber or handyman.

Pair it with Edge II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Stainless Steel
Overall length: 197 mm
Projection: 120 mm
Height: 80 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes

What's In The Box

• 1 x Edge Roll Holder with Shelf
• Installation Instructions

Nowhere to put your phone in the loo? The Raymor Edge II Toilet Roll Holder with Shelf in Chrome does two jobs in one: it holds the roll and gives you a small ledge on top for a phone or spare roll. The squared shape sits well next to square tapware. It's stainless steel with a chrome finish, and at 197mm wide, 80mm high and 120mm deep it fits most walls without getting in the way. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• Roll holder and shelf in one unit, so you get somewhere to rest a phone or spare roll
• Stainless steel body that won't rust in a damp toilet or ensuite
• Chrome finish that wipes clean and matches Edge II tapware and accessories
• 197mm wide with a 120mm projection, which keeps it clear of a swinging door
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Check what's behind the wall before you drill, or leave it to your plumber or handyman.

Pair it with Edge II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Stainless Steel
Overall length: 197 mm
Projection: 120 mm
Height: 80 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes

What's In The Box

• 1 x Edge Roll Holder with Shelf
• Installation Instructions

Old holder loose on the wall, or fitting out a new bathroom from scratch? The Phoenix Cromford Toilet Roll Holder in Brushed Bronze is a simple swap either way. It mounts on a twin screw plate, so it stays put through daily use. The Cromford range is designed in Australia by the Phoenix in-house team, and it keeps things pared back and simple, with subtle detailing that suits everything from a modern farmhouse look to an industrial-style space. The Brushed Bronze finish is durable and high quality, so it holds up over time and wipes clean without any special treatment. There's a 7 year warranty behind it too. Small job, and it looks good.

• Brushed Bronze finish that's hard-wearing and simple to wipe down, keeping it looking good for years
• Twin screw mounting plate for a stable, secure fix to the wall
• Designed in Australia, so it's built with local bathrooms in mind
• Part of an award-winning collection, taking out an iF Design award for innovation and industrial design excellence in 2023
• Covered by a 7 year warranty for long-term peace of mind

Team it with the matching Cromford tapware, showers and accessories to finish the look.

Specifications

Construction material: Stainless Steel
Finish/coating: PVD
Projection: 61mm
Overall Length: 138mm
Warranty: 7 Year Product or Parts Warranty 7 Year Finish Warranty

What's In The Box

1x Toilet roll holder
1x fixing kit
1x installation instructions

Downloads

Download the specification sheet below:

Phoenix Cromford Toilet Roll Holder - Brushed Bronze

Download the installation instructions below:

Phoenix Cromford Toilet Roll Holder - Brushed Bronze

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Wobbly roll holder, or a new bathroom to finish off? The Phoenix Gloss Toilet Roll Holder in Brushed Bronze handles either job. The compact, modern shape mixes solid flat surfaces with softer curves, so it sits well against most contemporary styling. It's built for everyday use, with a durable, high quality finish that holds up to daily wear. The twin screw mounting plate keeps things stable once your plumber or handyperson has it on the wall, so it won't spin loose on you six months in. Designed in Australia and backed by a 7 year warranty. Quality you can trust at a fair price. Also available in a range of other finishes.

• Compact modern profile that fits neatly into smaller spaces near the toilet
• Twin screw mounting plate for a secure, stable installation that won't work loose
• Durable, high quality finish that stands up to steam and everyday handling
• Designed in Australia, so you're getting a product built to suit local bathrooms
• Covered by a 7 year warranty for long-term peace of mind

Check your wall type and existing fixing points before ordering, or ask your plumber.

Team it with the matching Phoenix Gloss tapware and accessories to complete the look.

Specifications

Construction material: Stainless Steel
Finish/coating: PVD
Projection: 60mm
Overall Length: 176mm
Warranty: 7 Year Product or Parts Warranty 7 Year Finish Warranty

What's In The Box

1 x Toilet roll holder
1 x fixing kit
1 x installation instructions

Downloads

Download the specification sheet below:

Phoenix Gloss Toilet Roll Holder - Brushed Bronze

Download the installation instructions below:

Phoenix Gloss Toilet Roll Holder - Brushed Bronze

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Rusted-out roll holder finally had enough? The Nero Dolce II Toilet Roll Holder in Gun Metal is a simple swap, and a tidy pick if you're fitting out a new bathroom from scratch. It's made from 304 grade stainless steel, so it copes with the damp and resists wear and corrosion over the years. The gun metal finish keeps things modern and pairs with plenty of tapware and accessories. Everyday use is smooth. Installation is straightforward too, whether you have a go yourself or hand it to your plumber. There's a 10 year warranty behind it, so it should outlast the one it's replacing by a fair margin. Quality at a fair price, and it sits neatly alongside the rest of the Nero Dolce II range.

• Built from 304 grade stainless steel, so it holds up to humidity and resists corrosion for the long haul
• Gun metal finish delivers a clean, modern look that ties in with matching accessories
• Easy to install, which keeps the job quick whether you DIY or call a plumber
• Covered by a 10 year warranty for peace of mind

Team it with the matching Nero Dolce II accessories to finish the look.

Specifications

Construction material: 304 Stainless steel
Finish/coating: PVD
Overall length: 161mm
Projection: 77mm
Round plate diametre: Ø 46mm
Warranty: 10 Years

What's In The Box

1 x Toilet roll holder, fixing kit, installation instructions

Downloads

Download the specification sheet below:
Nero Dolce II Toilet Roll Holder Gun Metal

Download the installation instructions below:
Nero Dolce II Toilet Roll Holder Gun Metal

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Tired accessories can drag down an otherwise tidy bathroom. The Nero Dolce II Toilet Roll Holder in Brushed Gold is an easy swap, and a smart pick if you're fitting out from scratch. It's made from 304 grade stainless steel, so it handles everyday use and shrugs off the corrosion that comes with a humid bathroom. The Brushed Gold finish keeps things clean and modern. It's part of the Nero Dolce II range too, which makes matching your other fittings simple. Installation is straightforward, whether you have a go at it yourself or leave it to your plumber. And with a 10 year warranty behind it, you can bet it'll outlast the one it's replacing.

• Built from 304 grade stainless steel, so it holds up to daily use and resists rust in wet areas
• Easy to install, which keeps the job quick whether you DIY or use a tradie
• Brushed Gold finish for a clean, modern look that ties your bathroom together
• Covered by a 10 year warranty, giving you long-term peace of mind

Also available in Chrome, Matte Black, Brushed Nickel and Gun Metal.

Team it with the matching Nero Dolce II range to complete the look.

Specifications

Construction material: 304 Stainless steel
Finish/coating: PVD
Overall length: 161mm
Projection: 77mm
Round plate diametre: Ø 46mm
Warranty: 10 Years

What's In The Box

1 x Toilet roll holder, fixing kit, installation instructions

Downloads

Download the specification sheet below:
Nero Dolce II Toilet Roll Holder Brushed Gold

Download the installation instructions below:
Nero Dolce II Toilet Roll Holder Brushed Gold

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Ever reached for a spare roll and found an empty holder? The Nero Mecca Double Toilet Roll Holder With Shelf in Brushed Bronze holds two rolls, with a small shelf up top for the bits and pieces that usually end up on the cistern. It's a practical pick for a new bathroom or a straight swap for a tired old holder. Made from durable 304 stainless steel, so it stands up to the damp and won't rust in a humid bathroom. The Brushed Bronze finish is accurate and consistent, ready to sit alongside your other tapware and accessories. Clean, minimalist lines that suit most modern bathrooms without fuss. Backed by a 10 year warranty: quality you can trust at a fair price for the long haul.

• Holds two toilet rolls plus a handy top shelf, so spare rolls and small essentials both have a home
• Made from durable 304 stainless steel that resists rust in humid bathrooms
• Sleek, minimalist design that blends into modern bathroom styling
• Easy to install for a quick, straightforward fit
• Covered by a 10 year warranty for lasting peace of mind

Also available in Chrome, Matte Black, Brushed Nickel, Brushed Gold, Gun Metal and Matte White.

Team it with the matching Nero Mecca range to keep your accessories consistent.

Specifications

Construction material: 304 Stainless steel
Finish/coating: PVD
Overall length: 300mm
Projection: 100mm
Overall height: 100mm
Warranty: 10 Years

What's In The Box

1 x Toilet roll holder, fixing kit, installation instructions

Downloads

Download the specification sheet below:
Nero Mecca Double Toilet Roll Holder With Shelf Brushed Bronze

Download the installation instructions below:
Nero Mecca Double Toilet Roll Holder With Shelf Brushed Bronze

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages