3 Piece Bath Sets

Old three piece bath set past saving? The Raymor Atlanta Bath Set in Chrome is the traditional three piece setup: separate hot and cold wall taps plus a 165mm fixed spout, for baths with three outlets on the wall. Cross handles in brass give it the classic look that suits older homes and period-style renovations. The bodies are DZR brass under a chrome plated finish, and the taps run on jumper valves, which means a drip is usually fixed with a new washer rather than a new tap. Flow is rated at 6.0 litres a minute. Backed by a 15 year warranty on the bodies, spout, flanges, handles and chrome finish, with 1 year on seals and jumper valves.

• Three piece set: hot tap, cold tap and 165mm fixed spout, so you replace the lot at once
• Brass cross handles that are easy to turn and suit a traditional bathroom
• DZR brass construction that resists corrosion for a long life
• Jumper valve spindles, so servicing is a low-cost washer swap
• Chrome plated finish that wipes clean and matches the Atlanta range
• 6.0 litres a minute flow at the spout
• 15 year warranty on body, spout, flanges, handles, fittings and chrome finish

Wall mounted, for baths with three tap holes. If you're going from a mixer to a set, or the other way, ask your plumber about the wall breeches.

Atlanta also does the matching wall top assemblies, spouts and washing machine stops in Chrome.

Specifications

WELS water consumption: 6.0 L/Min
Construction material: DZR Brass
Operating mechanism: Jumper Valve
Overall height: 61.5 mm
Spout reach: 165mm
Spout function: Fixed
Country of origin: China
Warranty: 15 Years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals, jumper valves and labour

What's In The Box

• 1 x Bath set
• Installation Instructions

Want lever taps over the bath instead of the old cross handles? The Raymor Armada Quarter Turn Bath Set in Chrome is a three piece bath set with a modern twist: lever handles that turn a quarter of the way and stop, with the hot and cold rotating in opposite directions so both feel natural in the hand. Inside are ceramic disc spindles with flat sided assemblies rather than washers, so there's less to wear out. The 127mm aerated spout gives a softer stream at 6.0 litres a minute. Everything is DZR brass with a chrome plated finish. Backed by a 15 year warranty on the ceramic disc spindles, bodies, spout, flanges, handles, aerator and chrome finish, with 1 year on seals.

• Quarter turn lever handles, so full flow is one flick of the wrist
• Contra rotating hot and cold spindles, which means the levers move in mirror image and feel natural
• Ceramic disc spindles with flat sides in place of washers, for years of drip-free use
• 127mm aerated fixed spout that softens the stream and cuts splash
• DZR brass build under a chrome plated finish
• Flows at 6.0 litres a minute
• 15 year warranty covering spindles, body, spout, handles, aerator and the chrome finish

Wall mounted for baths with three tap holes. Ask your plumber to check the breech spacing matches your current set.

Match it with Armada tapware, showers and accessories for the rest of the room.

Specifications

WELS water consumption: 6.0 L/Min
Construction material: DZR Brass
Operating mechanism: Ceramic Disc
Overall height: 65 mm
Spout reach: 127mm
Spout function: Fixed
Country of origin: China
Warranty: 15 Years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals, jumper valves and labour.

What's In The Box

• 1 x Quarter turn bath set
• Installation Instructions

Old bath tap handles gone stiff, or starting a new bathroom from scratch? The Phoenix Vivid Pin Lever Bath Set 200mm is a straight, practical swap. The 200mm spout reaches over the bath edge, so filling is fuss-free. Pin lever handles give you simple, accurate control of hot and cold. It's built from lead-free brass, so it'll take years of daily use. The Chrome finish only needs a wipe with a cloth to stay looking sharp. Styling is modern and streamlined, and it's part of the wider Vivid range, which means the rest of your tapware can match. Bath Taps do not require a WELS rating in accordance with AS/NZS 6400. Quality you can trust at a fair price.

• Lead-free brass construction stands up to years of daily use, so it outlives the bathroom around it
• 200mm spout gives you the reach to fill the bath comfortably over the edge
• Pin lever handles offer simple, accurate control of your hot and cold flow
• Quality Chrome finish resists wear over time and wipes clean with a cloth
• Part of the Phoenix Vivid collection, backed by a wide choice of matching accessories

Check the spout reach and setout against your bath before ordering. Need a hand? Ask your plumber.

Team it with the matching Phoenix Vivid range to finish the look.

WELS & Watermark Certification

• Bath Taps do not require a WELS rating in accordance with AS/NZS 6400
• Licence No: 0133 Phoenix Tapware

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Sorting out the bath and want something with a bit of classic charm? The Phoenix Rhapsody Lever Bath Set gives you the taps and spout to run your bath, so it's a smart pick when you're replacing tired hardware or fitting out a new bathroom. The soft curves sit well in heritage and Hampton style rooms. It's built from lead free brass with a quality electroplated finish, so it holds up to daily use and keeps looking good. The 1/4 turn ceramic disc spindles give you smooth, reliable control every time. Lever handles are easy to turn with soapy hands, which the kids will thank you for. Designed in Australia and backed by a 7 year warranty: quality you can trust at a fair price.

• Lead free brass construction for a solid, long-lasting set that stands up to everyday use
• 1/4 turn ceramic disc spindles that operate smoothly and resist wear over time
• Quality electroplated finish that keeps its look and wipes clean easily
• Curved styling suited to heritage or Hampton style bathrooms
• Lever handles are easy to turn, which helps if you've got kids or family with limited grip
• Australian designed and covered by a 7 year warranty for peace of mind

Not sure about your existing setup? Check with your plumber before ordering.

Matching accessories are up for grabs to complete your bathroom look.

WELS & Watermark Certification

• Bath Taps do not require a WELS rating in accordance with AS/NZS 6400
• Licence No: 0133 Phoenix Tapware

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Swapping tired wall tapware, or plumbing a new wet area from scratch? The Clark Cross Lead Free Wall Basin/Bath Set 180mm in Matte Black is a three-piece wall-mounted set that works over a basin or a bath. The 180mm projection clears the basin or bath edge, so filling and washing up is comfortable. It's made from lead free brass containing less than 0.25% lead, which is better for a healthier home. There's an unrestricted aerator in the box to keep flow strong when you're running a bath. WELS 5 star rated at 6.0 litres a minute. Designed and engineered in Australia, and matte black suits plenty of bathroom styles. Cross handles, so you always know which way is off.

• Three-piece wall set suits both basin and bath installations, so it works across different setups
• 180mm projection reaches over the basin or bath edge for easy filling and use
• Unrestricted aerator included to maximise water flow for bath use
• Made from lead free brass with less than 0.25% lead for a healthier home
• Australian designed and engineered, so it's built to suit local conditions
• Matte black finish gives a modern look that's easy to match with other fittings

As a wall-mounted set, this relies on in-wall plumbing, so check your rough-in and have your plumber confirm placement before installing.

Team it with the matching Clark Cross range to complete the look.

WELS & Watermark Certification

• WELS 5 star rated
• 6.0 LT/MIN
• WELS Registration No: T30855
• All Clark Taps are Watermark Certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

Downloads

Download the installation instructions below:

Clark Cross Lead Free Wall Basin/Bath Set 180mm - Matte Black

Warranty

Clark products are covered by warranties of up to a Lifetime*

Clark products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 10 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 10 Year replacement product; 1 year parts and labour
• Wastes & Pop Up Plugs – 1 Year replacement product; 1 year parts and labour

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts & labour
• Cabinets – 5 Year replacement product or parts; 1 year labour
• Accessories & Spare parts – 1 Year replacement product or parts

Showers

• 10 year replacement product; 1 year parts, finishes & labour

Taps, Outlets & Mixers

• 10 year replacement product or parts; 1 year labour, finishes & ceramic disc spindles

Kitchen Accessories

• 1 Year replacement product or parts

Bathroom Accessories

• 5 years replacement product; 1 year finishes, wall fixing, mounting brackets & metal flex hoses

Should any warranty claim be made and attended to by a Clark authorised Service Agent and, in the opinion of the Service Agent or Clark, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or from some other cause other than a manufacturing defect of the goods for which Clark is responsible, Clark Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Clark directly on 13 14 16 for assistance. To view the Clark Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Filling a bath is a two-handle job for plenty of us, and there's nothing wrong with that. The Caroma Luna Lever Bath Tap Set in Black is a straight pick when you're replacing worn tapware or fitting out a new bathroom. The rounded shape and small lever handles suit plenty of bathroom styles, and the black finish keeps things clean and modern. Under that finish it's solid brass, so it's hard wearing and easy to look after. A ceramic disc cartridge keeps things smooth and stops the drips that turn into running taps down the track. Every Caroma tap is 100% leak tested before it leaves the factory, so you can bet it'll perform once your plumber has it in.

• Solid brass construction that stands up to daily use and needs little maintenance
• Ceramic disc cartridge for smooth control, no drips and less servicing down the track
• 250mm spout reach, so it sits comfortably over the bath
• Cylindrical shape wipes clean quickly, which means it keeps looking good
• 100% leak tested by Caroma, so you know it's sound before it goes in
• Water flow efficiency that keeps performance where you want it
• Modern black finish, also available in classic chrome

Check your existing tap hole spacing before ordering, or ask your plumber to confirm it suits your bath.

Team it with the matching Caroma Luna range to finish the look.

Specifications WELS water efficiency: WELS 4 star rated
WELS water consumption: 7.5L/min
WELS registration number: T34707
Watermark certification: All Caroma taps are Watermark certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box 1 x Bath Spout
1 x Hot Tap
1 x Cold Tap
1 x Installation Instructions

Downloads

Download the installation instructions below:

Caroma Luna Lever Bath Tap Set Black

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Chasing a classic look for the bath without giving up modern hardware? The Fienza Lillian Shepherds Crook Bath Set in Brushed Nickel is a traditional three piece set, ideal if you're replacing tired tapware or fitting out a heritage, Hampton or farmhouse style bathroom. The shepherds crook spout and vintage cross handles do the period styling. The quality PVD brushed nickel finish holds up over time. Inside, the handles run on a 1/4 turn ceramic disc, so control stays smooth and there's no wrestling with the taps mid-bath. It's designed for mains pressure, which suits most standard home setups. Old-school looks, hardware you can trust.

• PVD brushed nickel finish for a durable surface that keeps its look through daily use
• Vintage cross handle design that fits period and country-style bathrooms
• 1/4 turn ceramic disc for smooth, quick operation and fewer drips down the track
• Suitable for mains pressure, so it works with most standard household plumbing
• Modern vintage styling that ties in with traditional tapware across the room

This set is designed for mains pressure, so check your water pressure suits before ordering. Need a hand? Ask your plumber.

Team it with the matching Fienza Lillian range to finish the look.

Specifications WELS water efficiency: WELS 5 star rated
WELS water consumption: 5L/min
WELS registration number: T40011
Watermark certification: All Fienza taps are Watermark certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

• 1 x Bath Spout
• 1 x Hot Tap
• 1 x Cold Tap
• 1 x In-Wall Kit
• 1 x Installation Instructions

Downloads

Download the specification sheet below:

Fienza Lillian Shepherds Crook Bath Set - Brushed Nickel

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Restoring a period bathroom, or just replacing bath tapware that's seen better days? The Phoenix Nostalgia Bath Set 180mm Shepherds Crook is a classic-style set for filling your bath, and it sits right at home in older-style spaces. It's built from solid brass, so it takes years of daily use. The chrome finish holds its shine and wipes clean with a cloth. The 180mm shepherds crook shape gives you that traditional detail without complicating the install. Bath taps do not require a WELS rating in accordance with AS/NZS 6400, so there's no star rating to weigh up here. Heritage looks, quality you can trust at a fair price.

• Solid brass construction that handles constant use and outlasts the bathroom around it
• Quality chrome finish that keeps its look over time and cleans up with a quick wipe
• 180mm shepherds crook design for a traditional, old-world style that suits period homes
• Refined shape that pairs neatly with classic bathroom fittings, so nothing looks out of place

Have your plumber confirm your existing setup before ordering so the fit is right. Need a hand?

WELS & Watermark Certification

• Bath Taps do not require a WELS rating in accordance with AS/NZS 6400
• Licence No: 0133 Phoenix Tapware

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box 1 x Bath Spout
1 x Hot Tap
1 x Cold Tap
1 x Installation Kit
1 x Installation Instructions
1 x Warranty Card

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Dripping bath taps, or handles that need two hands and a bit of muscle? The Caroma Luna Lever Bath Tap Set in Chrome sorts both out. Small lever handles turn easily, and the rounded profile suits a wide range of bathrooms. It's solid brass, so it stands up to daily use year after year. Inside, the ceramic disc cartridge helps stop drips and cuts down on maintenance. The 250mm spout reach gives you room to work over the bath. Classic chrome wipes clean without fuss and sits happily with most colour schemes. Bath taps do not require a WELS rating in accordance with AS/NZS 6400, so there's no star rating to weigh up here.

• Ceramic disc cartridge stops drips and keeps ongoing maintenance to a minimum
• Solid brass construction is hard wearing and holds up well over time
• Rounded design with small lever handles that work with many bathroom styles
• Classic chrome finish that matches a broad range of fittings
• 250mm spout reach for comfortable use over the bath
• Cylindrical shape makes wiping down and general care easy, which your cleaning cloth will appreciate

Check your existing tap spacing before ordering, or ask your plumber to confirm the set will suit your setup.

WELS & Watermark Certification

Bath taps do not require a WELS rating in accordance with AS/NZS 6400
Licence No: 0001 Caroma

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box 1 x Bath Spout
1 x Hot Tap
1 x Cold Tap
1 x Installation Instructions

Downloads

Download the installation instructions below:

Caroma Luna Lever Bath Tap Set Chrome

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages