Raymor

Adding the finishing touches to a Projix bathroom? The Raymor Projix Robe Hook in Brushed Nickel is a small fix that makes a real difference: one hook for a towel or robe, screwed straight to the wall. It's compact at 43mm wide and 55mm high, and stands 65mm off the wall so a thick bath towel hangs without slipping. The hook is zinc alloy in a brushed nickel finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• Single hook for a towel or robe, handy behind a door or beside the shower
• 65mm projection, so a folded bath towel hangs clear of the wall
• Zinc alloy build with a brushed nickel finish that shrugs off steam
• Brass four-point fixings, for a hook that doesn't work loose
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use a wall plug in plasterboard or tiles, and check for pipes before you drill.

Fit a couple, then match them with Projix towel rails, roll holders and shelves in the same finish.

Specifications

Construction material: Zinc
Overall length: 43 mm
Projection: 65 mm
Height: 55 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Fixing Kit
• Installation Instructions

Want to lose the chrome button on a white cistern? The Raymor Cistern Dual Flush Button in Black is the replacement button for every Raymor back to wall and close coupled toilet suite, so it fits the Edge II, Alpha, Atlanta, Winton and Classic cisterns. It's a plastic button with the full and half flush split across the two halves, finished in black to tie the toilet in with your taps and accessories. It's the simplest way to change the look of a toilet you're otherwise happy with, and it's the part to order when the old button has cracked or stopped springing back. Raymor covers the button and finish for 5 years. Also available in Chrome, Brushed Nickel, Gloss White.

• Fits all Raymor back to wall and close coupled suites: Edge II, Alpha, Atlanta, Winton and Classic
• Dual flush button, full and half flush on the two halves
• Black finish on a plastic button, so it matches Raymor tapware in the same colour
• Replaces a cracked, sticking or faded button without touching the cistern
• 5 year warranty on the button and finish
• Button and installation instructions in the box

Lift the cistern lid, unscrew the old button and thread the new one in: a few minutes with no tools beyond your hands. Not for in-wall cisterns, which take a wall plate instead.

Match it with Raymor basin and shower mixers in the same finish, or order it alongside a Raymor Edge II or Winton toilet suite.

Specifications

Construction material: Plastic
Finish/coating: Black
Overall height: 230 mm
Overall width: 70 mm
Overall depth: 70mm
Suits: All Raymor back to wall and close coupled toilet suites (Edge II, Alpha, Atlanta, Winton, Classic)
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Fitting out a dark bathroom? The Raymor Round Wall Dual Flush Button Plate in Matte Black is a plastic plate in matte black, so it sits flat against a dark tile or feature wall without a chrome ring breaking it up. It measures 236mm wide by 152mm high and sits 8mm off the wall, with two round buttons for the full and half flush. It fits the Raymor in-wall cisterns 133137 and 133141, so it's the plate for an Edge II or Byron wall faced pan on a Raymor cistern, and it's also what you'd buy to replace a tired plate on one of those cisterns. Raymor covers the button and finish for 5 years. Also available in Chrome, Brushed Nickel, Gloss White, Stainless Steel.

• Fits Raymor in-wall cisterns 133137 and 133141 only, so check the cistern code before you order
• 236mm x 152mm plate, 8mm thick, with two round buttons for full and half flush
• Matte Black finish on a plastic plate, wiped clean with a soft cloth and soapy water
• Straight swap for an existing Raymor round plate when the old one is scratched or yellowed
• 5 year warranty on the flush button and finish
• Flush plate and installation instructions in the box

Clips onto the cistern access frame, so swapping a plate is a quick job you can do yourself. A new cistern install is a job for your plumber.

Order it with the Raymor In-Wall Cistern and an Edge II Wall Faced Rimless Pan, or match it to Raymor tapware in the same finish.

Specifications

Construction material: Plastic
Finish/coating: Matte Black
Overall height: 152 mm
Overall width: 236 mm
Plate thickness: 8mm
Suits: Raymor in-wall cisterns 133137 and 133141
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Want the flush plate to be real metal? The Raymor Round Wall Dual Flush Button Plate in Stainless Steel is a brushed stainless steel plate, which is the one to pick if you want metal rather than a coated finish. It measures 236mm wide by 152mm high and sits 11.5mm off the wall, with two round buttons for the full and half flush. It fits the Raymor in-wall cisterns 133137 and 133141, so it's the plate for an Edge II or Byron wall faced pan on a Raymor cistern, and it's also what you'd buy to replace a tired plate on one of those cisterns. Raymor covers the button and finish for 5 years. Also available in Chrome, Matte Black, Brushed Nickel, Gloss White.

• Fits Raymor in-wall cisterns 133137 and 133141 only, so check the cistern code before you order
• 236mm x 152mm plate, 11.5mm thick, with two round buttons for full and half flush
• Brushed stainless steel, wiped clean with a soft cloth and soapy water
• Straight swap for an existing Raymor round plate when the old one is scratched or yellowed
• 5 year warranty on the flush button and finish
• Flush plate and installation instructions in the box

Clips onto the cistern access frame, so swapping a plate is a quick job you can do yourself. A new cistern install is a job for your plumber.

Order it with the Raymor In-Wall Cistern and an Edge II Wall Faced Rimless Pan, or match it to Raymor tapware in the same finish.

Specifications

Construction material: Stainless Steel
Finish/coating: Stainless Steel
Overall height: 152 mm
Overall width: 236 mm
Plate thickness: 11.5mm
Suits: Raymor in-wall cisterns 133137 and 133141
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Want the flush plate to disappear into a white wall? The Raymor Round Wall Dual Flush Button Plate in Gloss White is a plastic plate in gloss white, which all but disappears on a white tiled wall. It measures 236mm wide by 152mm high and sits 8mm off the wall, with two round buttons for the full and half flush. It fits the Raymor in-wall cisterns 133137 and 133141, so it's the plate for an Edge II or Byron wall faced pan on a Raymor cistern, and it's also what you'd buy to replace a tired plate on one of those cisterns. Raymor covers the button and finish for 5 years. Also available in Chrome, Matte Black, Brushed Nickel, Stainless Steel.

• Fits Raymor in-wall cisterns 133137 and 133141 only, so check the cistern code before you order
• 236mm x 152mm plate, 8mm thick, with two round buttons for full and half flush
• Gloss White finish on a plastic plate, wiped clean with a soft cloth and soapy water
• Straight swap for an existing Raymor round plate when the old one is scratched or yellowed
• 5 year warranty on the flush button and finish
• Flush plate and installation instructions in the box

Clips onto the cistern access frame, so swapping a plate is a quick job you can do yourself. A new cistern install is a job for your plumber.

Order it with the Raymor In-Wall Cistern and an Edge II Wall Faced Rimless Pan, or match it to Raymor tapware in the same finish.

Specifications

Construction material: Plastic
Finish/coating: Gloss White
Overall height: 152 mm
Overall width: 236 mm
Plate thickness: 8mm
Suits: Raymor in-wall cisterns 133137 and 133141
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Want the button to match the cistern rather than stand out? The Raymor Cistern Dual Flush Button in Gloss White is the replacement button for every Raymor back to wall and close coupled toilet suite, so it fits the Edge II, Alpha, Atlanta, Winton and Classic cisterns. It's a plastic button with the full and half flush split across the two halves, finished in gloss white to tie the toilet in with your taps and accessories. It's the simplest way to change the look of a toilet you're otherwise happy with, and it's the part to order when the old button has cracked or stopped springing back. Raymor covers the button and finish for 5 years. Also available in Chrome, Black, Brushed Nickel.

• Fits all Raymor back to wall and close coupled suites: Edge II, Alpha, Atlanta, Winton and Classic
• Dual flush button, full and half flush on the two halves
• Gloss White finish on a plastic button, so it matches Raymor tapware in the same colour
• Replaces a cracked, sticking or faded button without touching the cistern
• 5 year warranty on the button and finish
• Button and installation instructions in the box

Lift the cistern lid, unscrew the old button and thread the new one in: a few minutes with no tools beyond your hands. Not for in-wall cisterns, which take a wall plate instead.

Match it with Raymor basin and shower mixers in the same finish, or order it alongside a Raymor Edge II or Winton toilet suite.

Specifications

Construction material: Plastic
Finish/coating: Gloss White
Overall height: 230 mm
Overall width: 70 mm
Overall depth: 70mm
Suits: All Raymor back to wall and close coupled toilet suites (Edge II, Alpha, Atlanta, Winton, Classic)
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Need the plate to match chrome taps? The Raymor Round Wall Dual Flush Button Plate in Chrome is a chrome plated plastic plate, the plain choice that goes with chrome tapware and most tiles. It measures 236mm wide by 152mm high and sits 8mm off the wall, with two round buttons for the full and half flush. It fits the Raymor in-wall cisterns 133137 and 133141, so it's the plate for an Edge II or Byron wall faced pan on a Raymor cistern, and it's also what you'd buy to replace a tired plate on one of those cisterns. Raymor covers the button and finish for 5 years. Also available in Matte Black, Brushed Nickel, Gloss White, Stainless Steel.

• Fits Raymor in-wall cisterns 133137 and 133141 only, so check the cistern code before you order
• 236mm x 152mm plate, 8mm thick, with two round buttons for full and half flush
• Chrome finish on a plastic plate, wiped clean with a soft cloth and soapy water
• Straight swap for an existing Raymor round plate when the old one is scratched or yellowed
• 5 year warranty on the flush button and finish
• Flush plate and installation instructions in the box

Clips onto the cistern access frame, so swapping a plate is a quick job you can do yourself. A new cistern install is a job for your plumber.

Order it with the Raymor In-Wall Cistern and an Edge II Wall Faced Rimless Pan, or match it to Raymor tapware in the same finish.

Specifications

Construction material: Plastic
Finish/coating: Chrome
Overall height: 152 mm
Overall width: 236 mm
Plate thickness: 8mm
Suits: Raymor in-wall cisterns 133137 and 133141
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Flush button cracked, stuck or gone dull? The Raymor Cistern Dual Flush Button in Chrome is the replacement button for every Raymor back to wall and close coupled toilet suite, so it fits the Edge II, Alpha, Atlanta, Winton and Classic cisterns. It's a plastic button with the full and half flush split across the two halves, finished in chrome to tie the toilet in with your taps and accessories. It's the simplest way to change the look of a toilet you're otherwise happy with, and it's the part to order when the old button has cracked or stopped springing back. Raymor covers the button and finish for 5 years. Also available in Black, Brushed Nickel, Gloss White.

• Fits all Raymor back to wall and close coupled suites: Edge II, Alpha, Atlanta, Winton and Classic
• Dual flush button, full and half flush on the two halves
• Chrome finish on a plastic button, so it matches Raymor tapware in the same colour
• Replaces a cracked, sticking or faded button without touching the cistern
• 5 year warranty on the button and finish
• Button and installation instructions in the box

Lift the cistern lid, unscrew the old button and thread the new one in: a few minutes with no tools beyond your hands. Not for in-wall cisterns, which take a wall plate instead.

Match it with Raymor basin and shower mixers in the same finish, or order it alongside a Raymor Edge II or Winton toilet suite.

Specifications

Construction material: Plastic
Finish/coating: Chrome
Overall height: 230 mm
Overall width: 70 mm
Overall depth: 70mm
Suits: All Raymor back to wall and close coupled toilet suites (Edge II, Alpha, Atlanta, Winton, Classic)
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Tapware in brushed nickel but the toilet button still chrome? The Raymor Cistern Dual Flush Button in Brushed Nickel is the replacement button for every Raymor back to wall and close coupled toilet suite, so it fits the Edge II, Alpha, Atlanta, Winton and Classic cisterns. It's a plastic button with the full and half flush split across the two halves, finished in brushed nickel to tie the toilet in with your taps and accessories. It's the simplest way to change the look of a toilet you're otherwise happy with, and it's the part to order when the old button has cracked or stopped springing back. Raymor covers the button and finish for 5 years. Also available in Chrome, Black, Gloss White.

• Fits all Raymor back to wall and close coupled suites: Edge II, Alpha, Atlanta, Winton and Classic
• Dual flush button, full and half flush on the two halves
• Brushed Nickel finish on a plastic button, so it matches Raymor tapware in the same colour
• Replaces a cracked, sticking or faded button without touching the cistern
• 5 year warranty on the button and finish
• Button and installation instructions in the box

Lift the cistern lid, unscrew the old button and thread the new one in: a few minutes with no tools beyond your hands. Not for in-wall cisterns, which take a wall plate instead.

Match it with Raymor basin and shower mixers in the same finish, or order it alongside a Raymor Edge II or Winton toilet suite.

Specifications

Construction material: Plastic
Finish/coating: Brushed Nickel
Overall height: 230 mm
Overall width: 70 mm
Overall depth: 70mm
Suits: All Raymor back to wall and close coupled toilet suites (Edge II, Alpha, Atlanta, Winton, Classic)
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

After a warm metallic finish without the shine? The Raymor Round Wall Dual Flush Button Plate in Brushed Nickel is a plastic plate in brushed nickel, a softer look than chrome that hides fingerprints better. It measures 236mm wide by 152mm high and sits 8mm off the wall, with two round buttons for the full and half flush. It fits the Raymor in-wall cisterns 133137 and 133141, so it's the plate for an Edge II or Byron wall faced pan on a Raymor cistern, and it's also what you'd buy to replace a tired plate on one of those cisterns. Raymor covers the button and finish for 5 years. Also available in Chrome, Matte Black, Gloss White, Stainless Steel.

• Fits Raymor in-wall cisterns 133137 and 133141 only, so check the cistern code before you order
• 236mm x 152mm plate, 8mm thick, with two round buttons for full and half flush
• Brushed Nickel finish on a plastic plate, wiped clean with a soft cloth and soapy water
• Straight swap for an existing Raymor round plate when the old one is scratched or yellowed
• 5 year warranty on the flush button and finish
• Flush plate and installation instructions in the box

Clips onto the cistern access frame, so swapping a plate is a quick job you can do yourself. A new cistern install is a job for your plumber.

Order it with the Raymor In-Wall Cistern and an Edge II Wall Faced Rimless Pan, or match it to Raymor tapware in the same finish.

Specifications

Construction material: Plastic
Finish/coating: Brushed Nickel
Overall height: 152 mm
Overall width: 236 mm
Plate thickness: 8mm
Suits: Raymor in-wall cisterns 133137 and 133141
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Need a wall mixer with enough reach for a big basin or a bath? The Raymor Sigma Wall Mixer Set with 220mm Spout in Chrome is the longer reach version of the Sigma wall set, built for wide basins and baths where a short spout would fall short. Mixer and fixed spout sit on one plate with a paddle handle, and the Ray 1 in-wall body is included, cast as a single piece with a dedicated wet-seal zone. The spout is lead free brass, WELS 5 star rated at 6.0 litres a minute, with an open flow aerator in the pack for bath filling. A ceramic disc cartridge in a brass housing keeps it smooth, and the chrome electroplated finish is easy to wipe over. Backed by a 20 year warranty on the cartridge, body, spout, aerator and handle, with 5 years on PVD and electroplated finishes. Also available in Black and Brushed Nickel.

• 220mm spout reach for wider basins and baths, so the water lands where you need it
• Mixer and spout on a single plate for a clean wall install
• Ray 1 in-wall body in the box, made in one piece with a wet-seal area
• WELS 5 star at 6.0 litres a minute, with an open flow aerator supplied for faster bath fills
• Ceramic disc cartridge in a brass housing for reliable, drip-free control
• Lead free brass spout under a chrome electroplated finish
• 20 year warranty on the cartridge, body, spout, aerator and handle, 5 years on PVD and electroplated finishes

Wall mounted, rated for 150 to 500kPa. Measure from the wall to the centre of your basin or bath before you pick a spout length, and ask your plumber if in doubt.

Sigma also does this set with a 180mm spout for smaller basins, plus matching showers and basin mixers.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T46179
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Operating pressure: 150 to 500kPa
Spout reach: 220mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Fitting out a wall mounted basin? The Raymor Sigma Wall Mixer Set with 180mm Spout in Brushed Nickel pairs a paddle handle mixer with a fixed spout on a single plate, so you get a tidy wall installation over a basin or bath without buying the parts separately. The Ray 1 in-wall body comes in the box, formed as one piece with a dedicated wet-seal area for a sound fitting behind the tiles. The spout is lead free brass and rated WELS 5 star at 6.0 litres a minute, and there's an open flow aerator included if you'd rather fill a bath faster. Ceramic disc cartridge in a brass housing, brushed nickel electroplated finish. Warranty is 20 years on the cartridge, body, spout, aerator and handle, with 5 years on PVD and electroplated finishes. Also available in Chrome and Black.

• Mixer and 180mm fixed spout on one plate, which keeps the wall neat
• Ray 1 in-wall body included, so your plumber has the full kit for rough-in and fit-off
• One piece in-wall body with a wet-seal zone that helps protect the wall cavity
• WELS 5 star at 6.0 litres a minute to keep water use in check over the basin
• Open flow aerator in the box, for when you want the bath full sooner
• Lead free brass spout with a brushed nickel electroplated finish
• 20 year warranty on the cartridge, body, spout, aerator and handle, 5 years on PVD and electroplated finishes

Wall mounted, for 150 to 500kPa water pressure. Check the 180mm reach clears the edge of your basin, and ask your plumber if you're unsure.

Need more reach over a wide basin or bath? The same set comes with a 220mm spout, and Sigma showers and basin mixers match the finish.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T46178
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Operating pressure: 150 to 500kPa
Spout reach: 185mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Shower and bath sharing one wall mixer? The Raymor Projix Wall Mixer with Diverter in Chrome runs two outlets from one lever: turn it on for the bath spout, flick the diverter and the water heads up to the shower. It's supplied with the Ray 1 inwall body with diverter, made as a single piece with a built-in wet seal zone, which is what your plumber sets into the wall before tiling. On the outside you get a pin lever handle and plate in a chrome electroplated finish. Backed by a 20 year warranty on the body, cartridge and handle, with 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• Built-in diverter that swaps flow between the bath spout and the shower
• Includes the Ray 1 inwall body with diverter (part 304824) for rough-in
• Single piece inwall body with a wet seal area, which cuts the risk of leaks behind the tiles
• Pin lever handle for quick temperature and flow control
• Chrome electroplated finish to match Projix spouts and showers
• 20 year warranty on the body, cartridge, spout, handle and chrome finish, 5 years on other electroplated finishes

Wall mounted, for 150 to 500kPa supply pressure. The inwall body needs to go in before the wall is closed, so ask your plumber about timing.

Finish the job with a Projix spout and shower in the same colour.

Specifications

Operating pressure: 150 to 500kPa
Lead free: Not Required
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Renovating the bathroom and want a wall mixer that fits the Winton look? The Raymor Winton Wall Mixer in Brushed Nickel is a single lever in-wall mixer for showers and baths, and it carries the same soft curves as the rest of the Winton range. The body is DZR brass, cast as one piece with a built in wet seal area, so there's less to go wrong behind the tiles. A 35mm ceramic disc cartridge in a brass housing keeps the paddle handle smooth and stops drips before they start. It's a straightforward upgrade for a new build or a bathroom refit, and your plumber will have seen this style of body many times before. Backed by a 20 year warranty on the body, cartridge and chrome finish. Also available in Chrome and Black.

• One piece DZR brass in-wall body with a dedicated wet seal area, which cuts the chance of leaks behind the wall
• 35mm ceramic disc cartridge in a brass housing for smooth control and a long working life
• Brushed nickel electroplated finish that matches Winton basin mixers, spouts and showers
• Paddle handle that's easy to work with soapy hands
• Rated for 150 to 500kPa, so it suits most Australian homes without a pressure valve
• Winton styling carries through the range, so the bathroom looks like it was planned

Wall mounted, so it needs to go in before the tiles do. Get your plumber to check the wall depth and your water pressure first.

Pair it with Winton bath spouts, basin mixers and shower heads in the same finish.

Specifications

Construction material: DZR Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Lead free: Not Required
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Want the vanity clear with the mixer up on the wall? The Raymor Winton Wall Mixer Set with 200mm Spout in Black pairs a rounded paddle mixer with a 200mm spout, both wall mounted, for a basin or a bath. Behind the wall the mixer body is one piece with a designated wet seal area, so your plumber can waterproof it properly and you're less likely to chase a leak later. The set is lead free brass with a black electroplated finish, and a 35mm ceramic disc cartridge in a brass housing runs the handle. It's WELS 5 star at 6.0 litres a minute, and an open flow aerator is included if you'd rather fill the bath quickly. Also available in Chrome and Brushed Nickel.

• Matched mixer and 200mm spout in one box, so nothing looks mismatched on the wall
• One piece in-wall body with a wet seal area for a more reliable waterproofing job
• Lead free brass construction for safer water and a long life
• Soft curved black electroplated trim that suits the rest of the Winton range
• 35mm ceramic disc cartridge in a brass housing, which keeps the paddle handle light for years
• WELS 5 star at 6.0 litres a minute for day-to-day use at the basin
• Open flow aerator supplied for faster bath filling

Wall mounted, for 150 to 500kPa water pressure. Get your plumber to set the body before the tiler arrives.

Round out the room with Winton basin mixers, tower mixers, bath or basin spouts and sink mixers in Black.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43430
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Spout reach: 200mm
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Spout not reaching the middle of the basin? The Raymor Sigma Wall Mixer Set with 220mm Spout in Black is the longer reach version of the Sigma wall set, built for wide basins and baths where a short spout would fall short. Mixer and fixed spout sit on one plate with a paddle handle, and the Ray 1 in-wall body is included, cast as a single piece with a dedicated wet-seal zone. The spout is lead free brass, WELS 5 star rated at 6.0 litres a minute, with an open flow aerator in the pack for bath filling. A ceramic disc cartridge in a brass housing keeps it smooth, and the black electroplated finish is easy to wipe over. Backed by a 20 year warranty on the cartridge, body, spout, aerator and handle, with 5 years on PVD and electroplated finishes. Also available in Chrome and Brushed Nickel.

• 220mm spout reach for wider basins and baths, so the water lands where you need it
• Mixer and spout on a single plate for a clean wall install
• Ray 1 in-wall body in the box, made in one piece with a wet-seal area
• WELS 5 star at 6.0 litres a minute, with an open flow aerator supplied for faster bath fills
• Ceramic disc cartridge in a brass housing for reliable, drip-free control
• Lead free brass spout under a black electroplated finish
• 20 year warranty on the cartridge, body, spout, aerator and handle, 5 years on PVD and electroplated finishes

Wall mounted, rated for 150 to 500kPa. Measure from the wall to the centre of your basin or bath before you pick a spout length, and ask your plumber if in doubt.

Sigma also does this set with a 180mm spout for smaller basins, plus matching showers and basin mixers.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T46179
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Operating pressure: 150 to 500kPa
Spout reach: 220mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Need a wall spout with a bit more reach? The Raymor Projix Curved Wall Mixer Set with 220mm Spout in Chrome is the longer reach version of the Projix curved set. That extra 40mm gets the water further out over a wide basin or a bath with a thick surround, without splashing the wall. You get a pin lever wall mixer with a 35mm ceramic disc cartridge and a fixed curved spout in lead free brass, both in a chrome electroplated finish. Water use is WELS 6 star at 4.5 litres a minute with the fitted aerator, and a 5 star 6.0 litre aerator and an open flow aerator for bath filling come in the pack. It's covered by a 20 year warranty on the body, cartridge, spout and handle. Also available in Black and Brushed Nickel.

• 220mm curved fixed spout for wide basins and baths with a broad ledge
• Matching pin lever mixer in the same box, so there's nothing to hunt down
• Lead free brass spout that's safer for drinking water
• 35mm ceramic disc cartridge for years of drip-free use
• Chrome electroplated finish that stands up to cleaning
• WELS 6 star 4.5 litre aerator fitted, 5 star 6.0 litre aerator in the pack for stronger flow
• Open flow aerator included for filling the bath faster

Wall mounted, rated for 150 to 500kPa. Check the spout won't foul the basin rim at 220mm, and ask your plumber to measure if in doubt.

Go for the 180mm version on a smaller basin, or the straight spout set if you prefer squarer lines. Projix showers and basin mixers match.

Specifications

WELS water efficiency: 6 star
WELS water consumption: 4.5 L/Min
WELS registration number: T46228
Construction material: Lead-Free Brass
Operating mechanism: 35m Ceramic disc
Operating pressure: 150 to 500kPa
Spout reach: 220mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Setting up a shower for a parent who needs something to hold? The Raymor Care Shower Set Inverted T Adjustable in Brushed Stainless Steel combines a grab rail and a hand shower in one wall mounted kit, built for assisted living and accessible bathrooms. The inverted T rail is 304 grade stainless steel, 32mm in diameter, and the centre upright can be set to the middle, left or right to suit the room. The 3 function hand shower has push button spray change and a 2 metre hose with a dual check valve. The cradle uses a friction grip and has an extended handle, so it's easy to adjust while seated. Manufactured to meet AS 1428.1:2021. WELS 3 star rated at 9 litres a minute. Also available in Stainless Steel.

• Grab rail and shower in one, so there's a firm hold right where you wash
• 304 grade brushed stainless steel inverted T rail, 32mm diameter, that resists corrosion
• Adjustable centre rail that can sit centre, left or right to suit the layout
• Push button hand shower with three spray settings, simple to work with one hand
• Extra long 2 metre hose with a dual check valve and a restrictor bracket to keep it tidy
• Friction grip cradle with an extended reach handle, so height changes are easy from a seat
• Built to meet AS 1428.1:2021 and WELS 3 star at 9 litres a minute

Wall mounted, so it needs solid fixing into the wall structure. Have your plumber and builder check the wall before you order. Note the hand piece, cradle, hose and fittings are chrome, while the rail is brushed stainless steel.

The Care range also has a straight rail shower set, grab rails, taps and toilets for accessible bathrooms.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18157
Spray options: 3 function
Rail size: 32mm
Country of origin: China & Philippines
Warranty: 20 years rail, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide bracket, diverter assembly, soap dish, and chrome plated finish. 5 years - PVD and electroplate finishes. 1 year - seals and labour

What's In The Box

• 1 x Grab rail
• Slider
• Handshower
• Shower hose
• Fixing kit
• Installation instructions

Time to swap the old wall mixer in the shower or over the bath? The Raymor Winton Wall Mixer in Black is a single lever in-wall mixer for showers and baths, and it carries the same soft curves as the rest of the Winton range. The body is DZR brass, cast as one piece with a built in wet seal area, so there's less to go wrong behind the tiles. A 35mm ceramic disc cartridge in a brass housing keeps the paddle handle smooth and stops drips before they start. It's a straightforward upgrade for a new build or a bathroom refit, and your plumber will have seen this style of body many times before. Backed by a 20 year warranty on the body, cartridge and chrome finish. Also available in Chrome and Brushed Nickel.

• One piece DZR brass in-wall body with a dedicated wet seal area, which cuts the chance of leaks behind the wall
• 35mm ceramic disc cartridge in a brass housing for smooth control and a long working life
• Black electroplated finish that matches Winton basin mixers, spouts and showers
• Paddle handle that's easy to work with soapy hands
• Rated for 150 to 500kPa, so it suits most Australian homes without a pressure valve
• Winton styling carries through the range, so the bathroom looks like it was planned

Wall mounted, so it needs to go in before the tiles do. Get your plumber to check the wall depth and your water pressure first.

Pair it with Winton bath spouts, basin mixers and shower heads in the same finish.

Specifications

Construction material: DZR Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Lead free: Not Required
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Need a wall mixer to run a shower or bath without a spout? The Raymor Edge II Wall Mixer in Brushed Nickel is the mixer body only, made for a shower or a bath where the spout or shower head is supplied separately. It's a square paddle mixer with the clean Edge II look. The in-wall body is a single casting with a dedicated wet seal area, so there's less chance of leaks behind the wall and an easier waterproofing job for your plumber. It's made from DZR brass, a grade that resists dezincification, with a brushed nickel electroplated finish on the visible parts. A 35mm ceramic disc cartridge in a brass housing keeps the handle smooth and precise. Also available in Black.

• Mixer only, for running a shower or a bath spout you already have or buy separately
• Single piece in-wall body with a wet seal zone that makes waterproofing behind the tiles simpler
• DZR brass construction that holds up in Australian water for years
• Square brushed nickel electroplated trim that matches Edge II showers and spouts
• 35mm ceramic disc cartridge in a brass housing for smooth, drip-free control

Wall mounted, for 150 to 500kPa water pressure. Plan it in before tiling and have your plumber confirm the rough-in depth.

For a bath or basin with a spout, look at the Edge II Wall Mixer Set with 200mm Spout, or match it with Edge II showers and basin mixers in Brushed Nickel.

Specifications

Construction material: DZR Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Lead free: Not Required
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Wide basin or deep bath edge to clear? The Raymor Projix Curved Wall Mixer Set with 220mm Spout in Black is the longer reach version of the Projix curved set. That extra 40mm gets the water further out over a wide basin or a bath with a thick surround, without splashing the wall. You get a pin lever wall mixer with a 35mm ceramic disc cartridge and a fixed curved spout in lead free brass, both in a black electroplated finish. Water use is WELS 6 star at 4.5 litres a minute with the fitted aerator, and a 5 star 6.0 litre aerator and an open flow aerator for bath filling come in the pack. It's covered by a 20 year warranty on the body, cartridge, spout and handle. Also available in Chrome and Brushed Nickel.

• 220mm curved fixed spout for wide basins and baths with a broad ledge
• Matching pin lever mixer in the same box, so there's nothing to hunt down
• Lead free brass spout that's safer for drinking water
• 35mm ceramic disc cartridge for years of drip-free use
• Black electroplated finish that stands up to cleaning
• WELS 6 star 4.5 litre aerator fitted, 5 star 6.0 litre aerator in the pack for stronger flow
• Open flow aerator included for filling the bath faster

Wall mounted, rated for 150 to 500kPa. Check the spout won't foul the basin rim at 220mm, and ask your plumber to measure if in doubt.

Go for the 180mm version on a smaller basin, or the straight spout set if you prefer squarer lines. Projix showers and basin mixers match.

Specifications

WELS water efficiency: 6 star
WELS water consumption: 4.5 L/Min
WELS registration number: T46228
Construction material: Lead-Free Brass
Operating mechanism: 35m Ceramic disc
Operating pressure: 150 to 500kPa
Spout reach: 220mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Shower mixer stiff, leaking or just dated? The Raymor Edge II Wall Mixer in Black is the mixer body only, made for a shower or a bath where the spout or shower head is supplied separately. It's a square paddle mixer with the clean Edge II look. The in-wall body is a single casting with a dedicated wet seal area, so there's less chance of leaks behind the wall and an easier waterproofing job for your plumber. It's made from DZR brass, a grade that resists dezincification, with a black electroplated finish on the visible parts. A 35mm ceramic disc cartridge in a brass housing keeps the handle smooth and precise. Also available in Brushed Nickel.

• Mixer only, for running a shower or a bath spout you already have or buy separately
• Single piece in-wall body with a wet seal zone that makes waterproofing behind the tiles simpler
• DZR brass construction that holds up in Australian water for years
• Square black electroplated trim that matches Edge II showers and spouts
• 35mm ceramic disc cartridge in a brass housing for smooth, drip-free control

Wall mounted, for 150 to 500kPa water pressure. Plan it in before tiling and have your plumber confirm the rough-in depth.

For a bath or basin with a spout, look at the Edge II Wall Mixer Set with 200mm Spout, or match it with Edge II showers and basin mixers in Black.

Specifications

Construction material: DZR Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Lead free: Not Required
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Need a grab rail and a hand shower in one fitting? The Raymor Care Shower Set Inverted T Adjustable in Stainless Steel combines a grab rail and a hand shower in one wall mounted kit, built for assisted living and accessible bathrooms. The inverted T rail is 304 grade stainless steel, 32mm in diameter, and the centre upright can be set to the middle, left or right to suit the room. The 3 function hand shower has push button spray change and a 2 metre hose with a dual check valve. The cradle uses a friction grip and has an extended handle, so it's easy to adjust while seated. Manufactured to meet AS 1428.1:2021. WELS 3 star rated at 9 litres a minute. Also available in Brushed Stainless Steel.

• Grab rail and shower in one, so there's a firm hold right where you wash
• 304 grade stainless steel inverted T rail, 32mm diameter, that resists corrosion
• Adjustable centre rail that can sit centre, left or right to suit the layout
• Push button hand shower with three spray settings, simple to work with one hand
• Extra long 2 metre hose with a dual check valve and a restrictor bracket to keep it tidy
• Friction grip cradle with an extended reach handle, so height changes are easy from a seat
• Built to meet AS 1428.1:2021 and WELS 3 star at 9 litres a minute

Wall mounted, so it needs solid fixing into the wall structure. Have your plumber and builder check the wall before you order. Note the hand piece, cradle, hose and fittings are chrome, while the rail is stainless steel.

The Care range also has a straight rail shower set, grab rails, taps and toilets for accessible bathrooms.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18157
Spray options: 3 function
Rail size: 32mm
Country of origin: China & Philippines
Warranty: 20 years rail, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide bracket, diverter assembly, soap dish, and chrome plated finish. 5 years - PVD and electroplate finishes. 1 year - seals and labour

What's In The Box

• 1 x Grab rail
• Slider
• Handshower
• Shower hose
• Fixing kit
• Installation instructions

Want one mixer that runs both the bath and the shower? The Raymor Sigma Wall Mixer with Diverter in Black handles a bath and shower from the one spot. The paddle handle sets temperature and flow, and the built-in diverter switches water between the spout and the shower head. It comes with the Ray 1 in-wall body, made as a single piece with a dedicated wet-seal area, so the part hidden in the wall is built to last. The mixer uses a ceramic disc cartridge in a brass housing for smooth, drip-free control, and the body is DZR brass under a black electroplated finish. You get a 20 year warranty on the cartridge, body and handle, with 5 years on PVD and electroplated finishes. Also available in Chrome and Brushed Nickel.

• Built-in diverter that sends water to the bath spout or the shower, so you need only one mixer on the wall
• Paddle handle for easy control of temperature and flow with one hand
• Matching Ray 1 in-wall body in the box for the rough-in
• Single piece in-wall body with a wet-seal zone to help protect the wall behind it
• Ceramic disc cartridge in a brass housing that stays smooth for years
• DZR brass body with a black electroplated finish and soft square styling
• 20 year warranty on the cartridge, body and handle, 5 years on PVD and electroplated finishes

Suits 150 to 500kPa water pressure and needs a bath spout and shower on the same wall. Ask your plumber to confirm the in-wall body fits your framing before you order.

Match it with a Sigma spout, shower and basin mixer in the same finish.

Specifications

Construction material: DZR Brass
Operating mechanism: Ceramic disc with brass housing
Operating pressure: 150 to 500kPa
Lead free: Not Required
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Straight spout, longer reach, mixer to match? The Raymor Projix Straight Wall Mixer Set with 220mm Spout in Black is the long reach option in the Projix straight range. The extra length is handy over a wide basin or a bath with a deep tiled surround, where a 180mm spout would drip onto the edge. The straight fixed spout is lead free brass and the pin lever mixer carries a 35mm ceramic disc cartridge, both finished in black electroplate. It's WELS 6 star at 4.5 litres a minute with the fitted aerator, and the 5 star 6.0 litre aerator and an open flow aerator for the bath are in the box. You get 20 years of warranty on the body, cartridge, spout and handle. Also available in Chrome and Brushed Nickel.

• 220mm straight fixed spout that reaches over wide basins and deep bath surrounds
• Pin lever wall mixer supplied in the same finish, so it's one order not two
• Lead free brass spout for safer drinking water
• 35mm ceramic disc cartridge that keeps the lever smooth for years
• Black electroplated finish on mixer and spout alike
• WELS 6 star 4.5 litre aerator fitted, with the 5 star 6.0 litre aerator supplied
• Open flow aerator included to fill a bath in less time

Wall mounted, 150 to 500kPa. Measure from wall to basin centre first. If 220mm overshoots, the 180mm set is the better pick, and your plumber can confirm.

Sits alongside Projix curved sets, showers and basin mixers in the same finish.

Specifications

WELS water efficiency: 6 star
WELS water consumption: 4.5 L/Min
WELS registration number: T46234
Construction material: Lead-Free Brass
Operating mechanism: 35m Ceramic disc
Operating pressure: 150 to 500kPa
Spout reach: 220mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Renovating and after a wall mixer that's easier to seal? The Raymor Edge II Wall Mixer Set with 200mm Spout in Brushed Nickel puts a square paddle mixer and a 200mm spout on the wall as one matched set, ready to serve a basin or a bath. The in-wall body is cast as a single piece with a dedicated wet seal zone, which makes it simpler for your plumber to waterproof properly behind the tiles. Lead free brass throughout, with a brushed nickel electroplated finish on the parts you see. A 35mm ceramic disc cartridge sits in a brass housing for a smooth handle over the long haul. WELS 5 star rated at 6.0 litres a minute, with an open flow aerator in the pack for quicker bath filling. Also available in Chrome and Black.

• Mixer and 200mm spout sold together, so the finish and styling match from the start
• Single piece in-wall body with a set wet seal area, which helps your plumber get the waterproofing right
• Lead free brass body for safer water and long service
• Square brushed nickel electroplated trim that ties in with Edge II basin and sink mixers
• 35mm ceramic disc cartridge in a brass housing behind the paddle handle
• WELS 5 star at 6.0 litres a minute for everyday use at the basin
• Optional open flow aerator included for filling the bath faster

Wall mounted, for 150 to 500kPa water pressure. Best planned in before tiling, so talk to your plumber early.

Edge II also does a wall mixer on its own, plus basin mixers, spouts, showers and accessories in Brushed Nickel.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43434
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Spout reach: 200mm
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Bath spout not reaching past the tiled ledge? The Raymor Projix Straight Wall Mixer Set with 220mm Spout in Chrome is the long reach option in the Projix straight range. The extra length is handy over a wide basin or a bath with a deep tiled surround, where a 180mm spout would drip onto the edge. The straight fixed spout is lead free brass and the pin lever mixer carries a 35mm ceramic disc cartridge, both finished in chrome electroplate. It's WELS 6 star at 4.5 litres a minute with the fitted aerator, and the 5 star 6.0 litre aerator and an open flow aerator for the bath are in the box. You get 20 years of warranty on the body, cartridge, spout and handle. Also available in Black and Brushed Nickel.

• 220mm straight fixed spout that reaches over wide basins and deep bath surrounds
• Pin lever wall mixer supplied in the same finish, so it's one order not two
• Lead free brass spout for safer drinking water
• 35mm ceramic disc cartridge that keeps the lever smooth for years
• Chrome electroplated finish on mixer and spout alike
• WELS 6 star 4.5 litre aerator fitted, with the 5 star 6.0 litre aerator supplied
• Open flow aerator included to fill a bath in less time

Wall mounted, 150 to 500kPa. Measure from wall to basin centre first. If 220mm overshoots, the 180mm set is the better pick, and your plumber can confirm.

Sits alongside Projix curved sets, showers and basin mixers in the same finish.

Specifications

WELS water efficiency: 6 star
WELS water consumption: 4.5 L/Min
WELS registration number: T46234
Construction material: Lead-Free Brass
Operating mechanism: 35m Ceramic disc
Operating pressure: 150 to 500kPa
Spout reach: 220mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Replacing the wall mixer in your shower or over the bath? The Raymor Projix Wall Mixer in Black is the single lever mixer that sits on the wall to control your shower or bath. It comes with the Ray 1 inwall body, which is cast as one piece with a dedicated wet seal area, so there's less chance of water tracking behind the wall. The inwall body is lead free, and the pin lever handle and cover plate carry a black electroplated finish that suits the rest of the Projix range. There's no spout or diverter here, so it's the pick when the mixer only needs to feed one outlet. Backed by a 20 year warranty on the body, cartridge and handle. Also available in Chrome and Brushed Nickel.

• Includes the Ray 1 inwall body (part 304823), so you get the rough-in and the trim in one box
• One piece inwall body with a dedicated wet seal area to keep water where it belongs
• Lead free inwall body for safer water
• Pin lever handle that's easy to work with soapy hands
• Black electroplated finish on the visible parts, matching the rest of Projix
• 20 year warranty on the body, cartridge, handle and chrome finish, 5 years on other electroplated finishes

Wall mounted and rated for 150 to 500kPa. Your plumber sets the inwall body at rough-in, so order it before the wall goes up.

Add a Projix spout, shower or the wall mixer with diverter to complete the set.

Specifications

Construction material: Lead free inwall body
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Bath filler and basin set in one, with extra reach? The Raymor Sigma Wall Mixer Set with 220mm Spout in Brushed Nickel is the longer reach version of the Sigma wall set, built for wide basins and baths where a short spout would fall short. Mixer and fixed spout sit on one plate with a paddle handle, and the Ray 1 in-wall body is included, cast as a single piece with a dedicated wet-seal zone. The spout is lead free brass, WELS 5 star rated at 6.0 litres a minute, with an open flow aerator in the pack for bath filling. A ceramic disc cartridge in a brass housing keeps it smooth, and the brushed nickel electroplated finish is easy to wipe over. Backed by a 20 year warranty on the cartridge, body, spout, aerator and handle, with 5 years on PVD and electroplated finishes. Also available in Chrome and Black.

• 220mm spout reach for wider basins and baths, so the water lands where you need it
• Mixer and spout on a single plate for a clean wall install
• Ray 1 in-wall body in the box, made in one piece with a wet-seal area
• WELS 5 star at 6.0 litres a minute, with an open flow aerator supplied for faster bath fills
• Ceramic disc cartridge in a brass housing for reliable, drip-free control
• Lead free brass spout under a brushed nickel electroplated finish
• 20 year warranty on the cartridge, body, spout, aerator and handle, 5 years on PVD and electroplated finishes

Wall mounted, rated for 150 to 500kPa. Measure from the wall to the centre of your basin or bath before you pick a spout length, and ask your plumber if in doubt.

Sigma also does this set with a 180mm spout for smaller basins, plus matching showers and basin mixers.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T46179
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Operating pressure: 150 to 500kPa
Spout reach: 220mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Need one mixer to run the shower and nothing else? The Raymor Projix Wall Mixer in Brushed Nickel is the single lever mixer that sits on the wall to control your shower or bath. It comes with the Ray 1 inwall body, which is cast as one piece with a dedicated wet seal area, so there's less chance of water tracking behind the wall. The inwall body is lead free, and the pin lever handle and cover plate carry a brushed nickel electroplated finish that suits the rest of the Projix range. There's no spout or diverter here, so it's the pick when the mixer only needs to feed one outlet. Backed by a 20 year warranty on the body, cartridge and handle. Also available in Chrome and Black.

• Includes the Ray 1 inwall body (part 304823), so you get the rough-in and the trim in one box
• One piece inwall body with a dedicated wet seal area to keep water where it belongs
• Lead free inwall body for safer water
• Pin lever handle that's easy to work with soapy hands
• Brushed nickel electroplated finish on the visible parts, matching the rest of Projix
• 20 year warranty on the body, cartridge, handle and chrome finish, 5 years on other electroplated finishes

Wall mounted and rated for 150 to 500kPa. Your plumber sets the inwall body at rough-in, so order it before the wall goes up.

Add a Projix spout, shower or the wall mixer with diverter to complete the set.

Specifications

Construction material: Lead free inwall body
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Wall mounted taps over the basin or bath due for an update? The Raymor Sigma Wall Mixer Set with 180mm Spout in Chrome pairs a paddle handle mixer with a fixed spout on a single plate, so you get a tidy wall installation over a basin or bath without buying the parts separately. The Ray 1 in-wall body comes in the box, formed as one piece with a dedicated wet-seal area for a sound fitting behind the tiles. The spout is lead free brass and rated WELS 5 star at 6.0 litres a minute, and there's an open flow aerator included if you'd rather fill a bath faster. Ceramic disc cartridge in a brass housing, chrome electroplated finish. Warranty is 20 years on the cartridge, body, spout, aerator and handle, with 5 years on PVD and electroplated finishes. Also available in Black and Brushed Nickel.

• Mixer and 180mm fixed spout on one plate, which keeps the wall neat
• Ray 1 in-wall body included, so your plumber has the full kit for rough-in and fit-off
• One piece in-wall body with a wet-seal zone that helps protect the wall cavity
• WELS 5 star at 6.0 litres a minute to keep water use in check over the basin
• Open flow aerator in the box, for when you want the bath full sooner
• Lead free brass spout with a chrome electroplated finish
• 20 year warranty on the cartridge, body, spout, aerator and handle, 5 years on PVD and electroplated finishes

Wall mounted, for 150 to 500kPa water pressure. Check the 180mm reach clears the edge of your basin, and ask your plumber if you're unsure.

Need more reach over a wide basin or bath? The same set comes with a 220mm spout, and Sigma showers and basin mixers match the finish.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T46178
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Operating pressure: 150 to 500kPa
Spout reach: 185mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions