Raymor Edge II Basin Tower Mixer Brushed Nickel

Fitting a square basin on top of the vanity? The Raymor Edge II Basin Tower Mixer in Brushed Nickel is the extended height version of the Edge II basin mixer, built for above-counter basins where the spout has to clear the rim of the bowl. Same squared styling, same paddle handle, just taller. It mounts through a single tap hole in the vanity top. The body is lead free brass under a brushed nickel electroplated finish, and the handle runs a 35mm ceramic disc cartridge for years of smooth, drip-free use. Braided hoses lined with PERT are attached and ready for your plumber. It's WELS 5 star rated at 6.0 litres a minute. Also available in Chrome and Black.

• Taller tower body that clears the rim of a vessel basin sitting on the vanity
• Squared Edge II design with a paddle handle to match the rest of the range
• Lead free brass under a brushed nickel electroplated finish, so it stays looking sharp
• 35mm ceramic disc cartridge that keeps the handle light and the spout drip-free
• PERT lined braided hoses fitted, saving time on the install
• WELS 5 star at 6.0 litres a minute for lower water use at the basin

Suits hob mounted vessel basins with one tap hole and 150 to 500kPa pressure. Check the height against your bowl before you buy, and ask your plumber if it's marginal.

Team it with Edge II bath or basin spouts, wall mixers, showers and accessories in Brushed Nickel.

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43433
Construction material: Lead-Free Brass
Operating mechanism: Ceramic Disc
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Height to spout: 250mm
Spout reach: 170mm
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

• 1 x Basin Mixer
• Fixing kit
• Installation instructions