Caroma

Tired of a dented stainless tub? The Caroma Cubus Laundry Vanity Basin 627mm is a smart alternative when you're setting up or refreshing a laundry. It's a 627mm rectangular basin with softened corners and a gloss white ceramic finish, so your laundry gets a clean, modern look that holds up to daily use. Made in Italy, the ceramic build wipes down easily and it's made to last. The bowl holds a generous 35L, which means it copes with the big jobs: soaking, hand-washing, filling buckets. There's a single taphole and a built-in overflow to help manage water levels. Practical, good-looking, and ready to work hard.

• Roomy 35L bowl capacity that copes with everything from soaking clothes to washing the dog or filling an ice chest for the next barbecue
• Made in Italy from gloss white ceramic, so it wipes clean and keeps its finish over the years
• 627mm length gives you plenty of room to work while suiting most laundry layouts
• Deep bowl design that makes light work of buckets, big pots and awkward loads
• Single taphole for a tidy, uncluttered setup
• Built-in overflow to help keep water where it should be

Check the single taphole suits your tap before ordering, or ask your plumber to confirm.

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need something solid to hold onto in the shower? The Caroma Care Support Shower Set with Inverted T Rail in Matte Black does two jobs: it's an 1100mm grab rail you can lean on, and a shower rail with a slider for the handset. This is the right hand version. The rail is 32mm by 1.2mm 304 stainless steel, so it resists rust in a wet room, with concealed clam flanges and GermGard antimicrobial protection under them. The kit includes a 100mm single function hand shower, a 1.5m Silverflex hose, the head slider and a double check valve. It's made to the AS 1428.1 standard for access and mobility and rated WELS 4 star at 7.5 litres a minute. Backed by a 20 year warranty (see the Caroma warranty document for what is covered).

• 1100mm inverted T rail that gives you a safe hold while you shower
• 32mm by 1.2mm 304 stainless steel, which stands up to years of steam and splashes
• Concealed clam flanges with GermGard antimicrobial protection for a cleaner fixing
• Hand shower, 1.5m Silverflex hose, slider and double check valve all in the box
• WELS 4 star at 7.5 litres a minute
• Made to the AS 1428.1 access and mobility standard
• 20 year warranty (see the Caroma warranty document for what is covered)

Right hand configuration, 700mm wide by 1100mm high. Fixings must go into solid framing or noggins, so have your plumber or builder check the wall first.

Caroma's HomeCare and Opal Support rails cover the rest of the bathroom.

Specifications

WELS water efficiency: 4 star
WELS water consumption: 7.5 litres a minute
WELS registration number: S16731
Watermark certification: WaterMark licence 021090
Construction material: 304 Stainless Steel
Finish/coating: Matte Black
Dimensions: 700 x 56 x 1100 mm (W x D x H)
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Nowhere to hang the towel by the shower? The Caroma Elegance Robe Hook in Chrome is a small metal hook, 50mm each way, with the soft curve of the rest of the Elegance accessories. It's the kind of thing you forget until you're dripping on the floor with the towel across the room. The polished chrome finish holds its shine, and the metal body is tested for strength, so a wet towel or heavy robe won't bend it. Dual fixings hold it firm to the wall, which matters when kids swing off it. The hook and the technical manual are in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 50mm by 50mm by 50mm, a compact hook for behind a door or beside the shower
• Metal construction tested for strength, so it holds a heavy wet towel
• Polished chrome finish that resists tarnish and wipes clean
• Dual fixings for a firm hold on the wall
• Curved shape that matches the Elegance tapware and accessories
• 20 year warranty (see the Caroma warranty document for what is covered)

Screw fixed to a wall or door. Use wall plugs in plasterboard or tiles, and avoid fixing to grout lines.

Match it with the Elegance Lever Basin Set and Elegance Sink Mixer in Chrome.

Specifications

Construction material: Metal
Finish/coating: Chrome
Dimensions: 50 x 50 x 50 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a steady hold getting up from the toilet? The Caroma Urbane II Universal Rail and Toilet Roll Holder Set in Gunmetal is a 400mm grab rail that holds the toilet roll. Beside the toilet that's exactly where a hand lands when someone pushes up to stand, and this rail is engineered to withstand up to 110kg where a regular roll holder would rip out of the plasterboard. It's die cast zinc, 400mm wide, 80mm deep and 30mm high, with hidden accessory mounting points, so it reads as a tidy piece of bathroom hardware. Australian designed and engineered. The rail and the toilet roll holder attachment come together. Backed by a 20 year warranty (see the Caroma warranty document for what is covered).

• 400mm rail with a toilet roll holder attachment, so there's a safe hold where you need it
• Secure mounting engineered to withstand up to 110kg
• Gunmetal die cast zinc that matches the Urbane II hand shower and towel rail set
• Hidden accessory mounting points for a clean look with no visible fixings
• Australian designed and engineered
• Rail and roll holder attachment both in the box
• 20 year warranty (see the Caroma warranty document for what is covered)

Mount into solid timber or a reinforced wall to get the full 110kg rating; ask your builder or plumber to check the wall.

Add the Urbane II Universal Towel Rail 400mm Set in Gunmetal by the basin.

Specifications

Construction material: Die-cast zinc
Finish/coating: Gunmetal
Dimensions: 400 x 80 x 30 mm (W x D x H)
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a towel rail that'll hold your weight if you slip? The Caroma Urbane II Universal Towel Rail 400mm Set in Brushed Nickel is a 400mm grab rail with a towel attachment, so it hangs the hand towel and gives you a secure hold at the same time. The mounting is engineered to take up to 110kg, which an ordinary towel rail is not. It's die cast zinc, 400mm wide and 80mm deep, with hidden accessory mounting points, so you see the rail and not the hardware. Australian designed and engineered. The rail and towel attachment come together in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Also available in Chrome and Gunmetal.

• 400mm rail with a towel attachment, so one fitting does two jobs
• Mounting engineered to withstand up to 110kg, for a safe hold by the basin or bath
• Die cast zinc in a brushed nickel finish that matches the Urbane II collection
• Hidden accessory mounting points, so no visible brackets or screws
• Australian designed and engineered
• Rail and towel attachment both in the box
• 20 year warranty (see the Caroma warranty document for what is covered)

Fix into solid framing or a reinforced wall to get the full load rating; ask your builder or plumber to check first.

The Urbane II Universal Rail and Toilet Roll Holder Set gives you the same hold beside the toilet.

Specifications

Construction material: Die-cast zinc
Finish/coating: Brushed Nickel
Dimensions: 400 x 80 x 30 mm (W x D x H)
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a shower rail you can actually lean on? The Caroma Opal Support Shower Rail 90 Degree in Chrome is a load bearing L shaped rail, 1230mm by 480mm, that holds your hand shower on a slider and gives you a solid grip on both the vertical and the horizontal. It's reversible, so it fits left or right handed layouts. The rail is 32mm brass in polished chrome, built to withstand 1100N, around 110kg, so it's a true support rail rather than a shower rail dressed up. The chrome slider, rail mounts with grub screws, drilling templates and warranty card are in the box. Shower head, hose and elbow are not included. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 90 degree rail, 1230mm by 480mm, for a hold on the vertical and the horizontal
• Load bearing to 1100N, around 110kg, so it does the job of a grab rail
• Reversible for left or right hand installation
• 32mm brass construction in polished chrome, which looks like regular bathroom hardware
• Chrome shower slider included for your hand shower
• Drilling templates and rail mounts in the box to make the install cleaner
• 20 year warranty (see the Caroma warranty document for what is covered)

Hand shower, hose and wall elbow are sold separately. Fix into solid framing or a reinforced wall; your plumber or builder should check first.

Add the Caroma Urbane II hand shower handset to complete it, or see the Opal Support Straight 900mm if you only need a vertical rail.

Specifications

Construction material: Brass
Finish/coating: Chrome
Dimensions: 32 x 430 x 1217 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fitting a grab rail by the bath without it looking like one? The Caroma Urbane II Universal Towel Rail 400mm Set in Chrome is a 400mm grab rail with a towel attachment, so it hangs the hand towel and gives you a secure hold at the same time. The mounting is engineered to take up to 110kg, which an ordinary towel rail is not. It's die cast zinc, 400mm wide and 80mm deep, with hidden accessory mounting points, so you see the rail and not the hardware. Australian designed and engineered. The rail and towel attachment come together in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Also available in Brushed Nickel and Gunmetal.

• 400mm rail with a towel attachment, so one fitting does two jobs
• Mounting engineered to withstand up to 110kg, for a safe hold by the basin or bath
• Die cast zinc in a chrome finish that matches the Urbane II collection
• Hidden accessory mounting points, so no visible brackets or screws
• Australian designed and engineered
• Rail and towel attachment both in the box
• 20 year warranty (see the Caroma warranty document for what is covered)

Fix into solid framing or a reinforced wall to get the full load rating; ask your builder or plumber to check first.

The Urbane II Universal Rail and Toilet Roll Holder Set gives you the same hold beside the toilet.

Specifications

Construction material: Die-cast zinc
Finish/coating: Chrome
Dimensions: 400 x 80 x 30 mm (W x D x H)
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Towel rail pulled out of the wall again? The Caroma Urbane II Universal Towel Rail 400mm Set in Gunmetal is a 400mm grab rail with a towel attachment, so it hangs the hand towel and gives you a secure hold at the same time. The mounting is engineered to take up to 110kg, which an ordinary towel rail is not. It's die cast zinc, 400mm wide and 80mm deep, with hidden accessory mounting points, so you see the rail and not the hardware. Australian designed and engineered. The rail and towel attachment come together in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Also available in Brushed Nickel and Chrome.

• 400mm rail with a towel attachment, so one fitting does two jobs
• Mounting engineered to withstand up to 110kg, for a safe hold by the basin or bath
• Die cast zinc in a gunmetal finish that matches the Urbane II collection
• Hidden accessory mounting points, so no visible brackets or screws
• Australian designed and engineered
• Rail and towel attachment both in the box
• 20 year warranty (see the Caroma warranty document for what is covered)

Fix into solid framing or a reinforced wall to get the full load rating; ask your builder or plumber to check first.

The Urbane II Universal Rail and Toilet Roll Holder Set gives you the same hold beside the toilet.

Specifications

Construction material: Die-cast zinc
Finish/coating: Gunmetal
Dimensions: 400 x 80 x 30 mm (W x D x H)
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing a bath in a standard 1700 alcove? The Caroma Newbury 1675mm Bath 280L in White is a straightforward acrylic bath for a back to wall install. At 1675mm long it suits the common alcove size, and it holds 280 litres, enough for a proper soak or a couple of kids at bath time. Acrylic is warm to the touch, lighter than steel to carry upstairs, and easy to clean with a non abrasive product. There's an overflow fitted, which is one less thing to worry about with children. Note that the waste kit is not in the box, so you'll need to buy the plug and waste separately. Made in China.

• 1675mm long, so it drops into a standard family bathroom alcove
• 280 litre capacity for a deep, comfortable soak
• Acrylic shell that holds heat and feels warmer than steel
• Overflow fitted to catch a forgotten tap
• Back to wall design for a tiled or panelled front
• Waste kit not included, so order a matching bath waste at the same time

Measure your alcove length and the waste position before you buy, and have your plumber check the floor is level and supported.

Pair it with the Elegance II Bath Outlet 180mm and wall top assemblies for the bath taps.

Specifications

Construction material: Acrylic
Finish/coating: White
Dimensions: 1670 x 760 x 478 mm (W x D x H)
Country of origin: China
Warranty: 20 years bath shell, 1 year labour (see Caroma warranty document)
Capacity: 280 litres

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a grab rail that blends into a white bathroom? The Caroma HomeCare Conventional Grab Rail 600 Straight in White is a 600mm straight rail for anyone who wants a safe hold in the bathroom. The white powder coat sits quietly against white tiles, so it doesn't shout hospital. Underneath it's 304 stainless steel, 32mm in diameter, with 75mm concealed clam flanges that hide the screws. It's built to withstand a 1100N load and made to comply with the grab rail requirements of AS 1428.1-2021, so it's the same standard used in access bathrooms. The technical manual is in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 600mm straight rail, a handy length beside a toilet or at a shower entry
• 32mm 304 stainless steel core, so it won't rust in a wet room
• White powder coat finish that blends in with white tiles and fittings
• 75mm concealed clam flanges that hide the fixings
• Rated to withstand 1100N, built to AS 1428.1-2021 grab rail requirements
• Suits home and health care use
• 20 year warranty (see the Caroma warranty document for what is covered)

Must be fixed into solid framing, noggins or a reinforced wall. Ask your builder or plumber to check the wall before drilling.

Need more reach? The HomeCare 900 Straight is the longer version in the same finish.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: White
Dimensions: 600 x 60 x 60 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Towel rail rusting through the chrome? The Caroma Cosmo Metal Single Towel Rail 930mm in Matte Black is a single bar across 930mm of wall, wide enough to spread a bath sheet out flat so it dries by morning. The rail is metal with a matte black finish, with the same soft rounded look as the rest of the Cosmo accessories. Dual fixings at each end hold it firm when a towel is yanked off in a hurry. It suits plastered and tiled bathrooms, and the fixing kit comes in the box: two mounting plates, screws, plastic wall plugs and slotted fixing screws, plus the warranty card. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 930mm single rail, long enough to spread a bath sheet flat
• Metal construction with a matte black finish
• Dual fixings for added strength when towels are pulled off
• Smooth, rounded Cosmo lines that suit a modern bathroom
• Suits plastered and tiled bathrooms, fixing kit and wall plugs included
• 20 year warranty (see the Caroma warranty document for what is covered)

Check you have 930mm of clear wall and fix into studs where you can; ask your builder if the wall is unusual.

Pair it with the Cosmo Double Towel Rail 930mm or the Urbane II hand shower in Matte Black.

Specifications

Construction material: Metal
Finish/coating: Matte Black
Dimensions: 77 x 77 x 45 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Shower rail flimsy and the handset keeps slipping? The Caroma Opal Support Shower Rail Straight 900mm in Chrome looks like an ordinary slide rail but is built as a load bearing support rail: 32mm brass, polished chrome, constructed to withstand 1100N, which is around 110kg. That means if someone slips and grabs it, it holds. The chrome slider carries your existing hand shower up and down the 900mm length. Rail mounts with grub screws, drilling templates and a warranty card are in the box. The shower head, hose and wall elbow aren't in the box, so you can keep your current ones or choose new. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 900mm straight rail that doubles as a vertical grab rail
• Built to withstand 1100N, around 110kg, so it's safe to lean on
• 32mm brass in polished chrome, which blends in with standard tapware
• Chrome shower slider included to hold your hand shower
• Rail mounts, grub screws and drilling templates in the box
• Shower head, hose and elbow not included, so you can reuse what you have
• 20 year warranty (see the Caroma warranty document for what is covered)

Needs solid fixing into framing or a reinforced wall; have your builder or plumber check the wall before drilling.

Want a horizontal hold as well? See the Opal Support Shower Rail 90 Degree.

Specifications

Construction material: Brass
Finish/coating: Chrome
Dimensions: 32 x 75 x 840 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Two bath towels and one rail that's never dry? The Caroma Cosmo Metal Double Towel Rail 930mm in Matte Black gives you two rails, one in front of the other, across 930mm of wall, so two bath towels hang side by side and actually dry. It's metal with a matte black finish and smooth rounded lines, no sharp corners to catch a hip on. A double rail also keeps the towels off the floor and off the vanity. Caroma rates it for plastered and tiled bathrooms, and the fixing kit is in the box: two mounting plates, screws, plastic wall plugs and slotted fixing screws, along with the instructions. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 930mm wide double rail, so two bath towels dry side by side
• Metal construction under a matte black finish
• Smooth rounded lines with no sharp edges
• Suits plastered and tiled bathrooms
• Fixing kit included: mounting plates, screws, wall plugs and slotted fixing screws
• 20 year warranty (see the Caroma warranty document for what is covered)

Measure 930mm of clear wall before you order. Fix into studs or use the supplied plugs in tile or plaster, and keep clear of grout lines.

The Cosmo Single Towel Rail 930mm matches it in Matte Black.

Specifications

Construction material: Metal
Finish/coating: Matte Black
Dimensions: 140 x 140 x 45 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fitting out a childcare or preschool toilet? The Caroma Junior Toilet Seat in Black is a single flap seat sized down to suit the Caroma Junior pan only, the smaller pan used in childcare centres, kindergartens and some family bathrooms. It's a medium weight injection moulded seat in solid section plastic, so it takes the knocks of a busy toilet block. GermGard, Caroma's antibacterial additive, is in the plastic. Single flap means a seat ring with no lid, which keeps it simple for small hands. It measures 315mm by 380mm. Hinge brackets, base plates, bolts and nuts come in the box. Backed by a 5 year warranty (see the Caroma warranty document for what is covered). Made in China.

• Reduced size to fit the Caroma Junior pan only, so check you have that pan first
• Single flap, a seat ring with no lid, which is easier for young children
• Solid section injection moulded plastic that handles a busy toilet block
• GermGard antibacterial additive in the plastic
• Black finish that hides scuffs in a high traffic room
• Left and right hinge brackets, base plates, bolts and nuts in the box
• 5 year warranty (see the Caroma warranty document for what is covered)

315mm by 380mm, for the Caroma Junior pan only. It won't fit a standard adult pan.

Caroma's Pedigree II and Trident seats cover the full size pans in the same building.

Specifications

Construction material: Plastic
Finish/coating: Black
Dimensions: 315 x 380 x 17 mm (W x D x H)
Country of origin: China
Warranty: 5 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Got an ivory suite and can't find a seat to match? The Caroma Trident Toilet Seat in Ivory is a medium weight double flap seat that snaps off its hinges, so you can lift the whole seat away and clean around the hinge area properly. Ivory is the hard colour to find, and this one matches older cream and ivory suites. The pan fittings are fully adjustable, with standard and vandal resistant buttons in the box, and GermGard, Caroma's antibacterial additive, is moulded into the plastic. It's rated for homes and light duty commercial use. The seat measures 368mm by 350mm; check the fit against your pan. If you want top fixing, the blind fixing kit 405144 is sold separately. Backed by a 5 year warranty (see the Caroma warranty document for what is covered). Made in China.

• Snap on, snap off seat that lifts clear of the pan for a proper clean
• Ivory colour to match older cream and ivory toilet suites
• Double flap with fully adjustable pan fittings, so it lines up with most hole spacings
• Standard and vandal resistant buttons supplied in the box
• GermGard antibacterial additive in the seat plastic
• Rated for home and light duty commercial use
• 5 year warranty (see the Caroma warranty document for what is covered)

368mm by 350mm, fixed from below as standard. Order the optional blind fixing kit 405144 if you can't get under the pan rim.

For a heavier seat, see the Caroma Pedigree II.

Specifications

Construction material: Plastic
Finish/coating: Ivory
Dimensions: 368 x 350 x 18 mm (W x D x H)
Country of origin: China
Warranty: 5 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Wall taps over the bath or basin stiff and leaking? The Caroma Elegance II Wall Top Assemblies in Chrome are a pair of hot and cold wall taps, no spout, sold together. They're the simplest way to freshen a bath, basin or shower that runs on separate taps, without touching the plumbing behind the wall. Each tap uses a copper jumper valve, so fixing a drip means a new washer, not a new tap. The bodies are lead free brass (under 0.25% lead) that meets the new lead free WaterMark standard, with ceramic parts. Flanges, handles, retaining nuts, clips and a spanner are in the box with the technical manual. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• Hot and cold wall taps sold as a pair, with no spout, for a quick refresh
• Lead free brass under 0.25% lead, which meets the new lead free WaterMark standard
• Copper jumper valves, so a worn washer is a five minute job
• Wall flanges, handles with inserts, retaining nuts and clips in the box
• Spanner supplied, which saves your plumber a trip to the van
• Matches the Elegance II bath outlet, shower set and laundry set
• 20 year warranty (see the Caroma warranty document for what is covered)

Wall mounted. Ask your plumber to confirm they suit your existing tap bodies before ordering.

Add the Elegance II Bath Outlet 180mm for a complete bath set.

Specifications

Construction material: Brass and ceramic
Finish/coating: Chrome
Dimensions: 62 x 74 x 75 mm (W x D x H)
Watermark certification: WaterMark licence 020203
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Washing machine taps hard to turn off? The Caroma Elegance II Washing Machine Set in Chrome is a pair of hot and cold stop taps for the wall behind your washer. Being able to turn them off properly matters: a stuck stop tap is the one you can't close when a hose lets go. The bodies are lead free brass (under 0.25% lead) that meets the new lead free WaterMark standard, and they use copper jumper valves, so a drip is fixed with a washer. Tap bodies, cover plates, threaded nipples, handles, nuts, clips and a spanner all come in the box with the technical manual. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• Sold as a hot and cold pair, ready to replace the stops behind the machine
• Lead free brass under 0.25% lead, meeting the new lead free WaterMark standard
• Copper jumper valves that take a standard washer when they start to weep
• Cover plates and threaded nipples included to finish the wall neatly
• Handles with inserts and a spanner in the box
• Same look as the Elegance II laundry set, so the whole laundry matches
• 20 year warranty (see the Caroma warranty document for what is covered)

Wall mounted. Check your washing machine hoses have standard fittings and ask your plumber about the tap centres.

Pair it with the Elegance II Laundry Set over the trough.

Specifications

Construction material: Brass
Finish/coating: Chrome
Dimensions: 64 x 110 x 75 mm (W x D x H)
Watermark certification: WaterMark licence 020203
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a longer rail along the bath or shower wall? The Caroma HomeCare Conventional Grab Rail 900 Straight in White gives you 900mm of rail, long enough to fix on an angle so there's a hold at sitting height and standing height. It's for anyone who wants a safe hold in the bathroom, and the white powder coat keeps it low key against light tiles. The rail is 304 stainless steel, 32mm in diameter, with 75mm concealed clam flanges, so no screw heads show. It's constructed to withstand 1100N and made to comply with the grab rail requirements of AS 1428.1-2009. Caroma makes the range in lengths from 300mm to 900mm, and this is the longest. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 900mm straight rail that can be fixed horizontally or on an angle
• 32mm 304 stainless steel under a white powder coat
• 75mm concealed clam flanges, so the fixings stay hidden
• Constructed to withstand 1100N, built to AS 1428.1-2009 grab rail requirements
• Longest rail in the HomeCare range, for the shower wall or along a bath
• Suits home and health care use
• 20 year warranty (see the Caroma warranty document for what is covered)

Fixings need solid timber or a reinforced wall behind the tiles; get your builder to confirm before you drill.

Pair it with the HomeCare 600 Straight beside the toilet.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: White
Dimensions: 900 x 60 x 78 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Small powder room and no space for a vanity? The Caroma Carboni II Wall Basin 3 Tapholes in White is a square, wall hung basin, 415mm by 415mm and 150mm deep, that frees up the floor underneath. It's vitreous china, which takes scrubbing without scratching, with an overflow and a 3 litre capacity to the overflow. One tap hole suits a single basin mixer. A chrome flush fitting waste, a white plug and the basin fixing kit are in the box, so the only extras are the tap and a bottle trap. Caroma also makes it with three tap holes if you'd rather a basin set. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in Vietnam.

• 415mm square and wall hung, so a small bathroom keeps its floor space
• Vitreous china that shrugs off daily cleaning
• One tap hole for a single basin mixer
• Overflow fitted, with 3 litres of capacity before it reaches the overflow
• Flush fitting chrome waste and a white plug included
• Wall fixing kit in the box, which saves a trip to the hardware store
• 20 year warranty (see the Caroma warranty document for what is covered)

Wall mounted with the supplied fixing kit; tapware and a bottle trap are not included. Your plumber will need solid framing or noggins behind the wall.

Pair it with the Elegance robe hook and a Cosmo towel rail, or look at the Tribute Square 420 if you want a semi recessed basin instead.

Specifications

Construction material: Vitreous China
Finish/coating: White
Dimensions: 415 x 150 x 415 mm (W x D x H)
Country of origin: Vietnam
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Sink mixer handle snapped or spinning loose? The Caroma Elegance Sink Mixer in Chrome is a 300mm high mixer with a loop handle you can hook with a finger, handy when your hands are covered in flour or suds. It's a straightforward swap for most single hole kitchen and laundry sinks. The body is lead free brass (under 0.25% lead) that meets the new lead free WaterMark standard, with a 40mm ceramic disc cartridge and the flow regulated aerator already in place. It carries a WELS 4 star rating at 7.5 litres a minute. Two flexible tails and a two stud fixing pack are in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 300mm high with an 80mm wide body, so there's room to rinse a tall jug
• Loop handle that's easy to hook and pull even with slippery hands
• Lead free brass under 0.25% lead, meeting the new lead free WaterMark standard
• 40mm ceramic disc cartridge for a long life and smooth temperature control
• WELS 4 star at 7.5 litres a minute, aerator fitted at the factory
• Flexible hot and cold tails plus the fixing pack in the box
• 20 year warranty (see the Caroma warranty document for what is covered)

Made for a single tap hole sink or bench. Check the clearance under the bench for the fixing studs, or ask your plumber.

Matching Elegance tapware and the Elegance robe hook are in Chrome too.

Specifications

WELS water efficiency: 4 star
WELS water consumption: 7.5 litres a minute
WELS registration number: T16841
Watermark certification: WaterMark licence 020203
Construction material: Brass
Finish/coating: Chrome
Dimensions: 80 x 0 x 300 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Hard to turn a tap with sore hands? The Caroma Elegance Lever Basin Set in Chrome is a three piece basin set: hot and cold quarter turn taps with extended lever handles, plus a swivel basin outlet. The long levers are easy to see and easy to push with a wrist or the heel of a hand, which is why Caroma rates this set as suitable for aged care. It's lead free brass (under 0.25% lead) that meets the new lead free WaterMark standard, with quarter turn ceramic discs for smooth, drip free control. WELS 5 star at 6.0 litres a minute. Red, blue and yellow indicator rings come in the box so you can mark hot, cold and warm. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• Extended lever handles that need little grip strength, suitable for aged care settings
• Quarter turn ceramic disc tap bodies, so on and off is a quick, light movement
• Lead free brass under 0.25% lead, meeting the new lead free WaterMark standard
• WELS 5 star at 6.0 litres a minute, which keeps water use down at the basin
• Swivel outlet with an aerator that moves aside for filling a cup or washing hair
• Red, blue and yellow indicator rings included, so hot and cold are obvious at a glance
• 20 year warranty (see the Caroma warranty document for what is covered)

Suits a basin with three tap holes. A breech piece with olives and compression nuts is included; ask your plumber to confirm your tap centres.

Match it with the Caroma Elegance sink mixer and robe hook in Chrome.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 litres a minute
WELS registration number: T40774
Watermark certification: WaterMark licence 020203
Construction material: Brass
Finish/coating: Chrome
Dimensions: 54 x 120 x 174 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Rental laundry needs a working tap, not a showpiece? The Caroma Tasman Sink Mixer in Chrome is the no frills option: solid lead free brass (under 0.25% lead) that meets the new lead free WaterMark standard, a 40mm cartridge and a swivel spout, nothing you don't need. It stands 129mm high with a 264mm reach, so it tucks under a window and still covers a double bowl. The WELS rating is 4 star at 7.5 litres a minute. Flexible SoftPEX tails and the flow regulated aerator insert are included. It's backed by a 10 year warranty (see the Caroma warranty document for what is covered), shorter than the other Caroma mixers here but fair for the price. Made in China.

• Lead free brass under 0.25% lead, which meets the new lead free WaterMark standard
• 40mm cartridge for smooth control and a long working life
• Low 129mm body with a long 264mm swivel spout, so it fits under a window and reaches both bowls
• Durable chrome finish that wipes clean
• WELS 4 star at 7.5 litres a minute
• Flexible SoftPEX tails and aerator insert in the box
• 10 year warranty (see the Caroma warranty document for what is covered)

Mounts through a single tap hole. Check your under bench clearance, and ask your plumber if your water pressure is unusually high or low.

Spend a little more for the Caroma Acqua or Elegance sink mixers if you want the 20 year warranty.

Specifications

WELS water efficiency: 4 star
WELS water consumption: 7.5 litres a minute
WELS registration number: T45961
Watermark certification: WaterMark licence 020203
Construction material: Brass
Finish/coating: Chrome
Dimensions: 49 x 264 x 129 mm (W x D x H)
Country of origin: China
Warranty: 10 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Shower head stuck pointing at the wall? The Caroma Series A Adjustable Wall Shower in Chrome is a brass wall arm with a 105mm rose that gives you three sprays: a normal outer ring, a massage spray from the centre, or both together. The arm uses Caroma's patented Stayfast lock, so once you angle the rose it stays there instead of sagging back down. It reaches 249mm from the wall. The rose has a 9 litre a minute flow regulator fitted and is WELS 3 star rated, a fuller flow than most newer showers. It's a sensible swap for an old fixed arm and rose on a two tap or mixer shower. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• Three spray settings: normal, massage or combination, so everyone in the house gets a say
• Patented Stayfast arm lock that holds the angle you set
• 249mm reach from the wall, which gets the rose out over your head
• Brass construction under a chrome finish
• WELS 3 star at 9.0 litres a minute, flow regulator fitted
• 105mm rose, a compact size for smaller showers
• 20 year warranty (see the Caroma warranty document for what is covered)

Screws onto a standard wall shower outlet. Ask your plumber to check the thread and seal.

Pair it with the Elegance II Shower Set taps for a complete two tap shower.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 litres a minute
WELS registration number: S07567
Watermark certification: WaterMark licence 021090
Construction material: Brass
Finish/coating: Chrome
Dimensions: 64 x 249 x 93 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a tall kitchen tap that clears a stockpot? The Caroma Cirrus Sink Mixer in Chrome is a gooseneck kitchen mixer, 333mm tall with a swivel spout, so big pots and tall jugs fit under it with room to spare. The loop handle gives you something to hook a finger through when your hands are wet or soapy. It's made from lead free brass (under 0.25% lead) that meets the new lead free WaterMark standard, a sensible upgrade on an older tap. It's rated WELS 4 star at 7.5 litres a minute. Soft PEX flexible hoses, a flow regulated aerator, the fixing pack and the allen key all come in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in Vietnam.

• Gooseneck spout 333mm high with a 171mm reach, so filling a stockpot is no drama
• Swivel spout that moves between bowls on a double sink
• Loop handle that's easy to grip with wet or greasy hands
• Lead free brass under 0.25% lead, meeting the new lead free WaterMark standard
• WELS 4 star at 7.5 litres a minute to keep the water bill in check
• Two flexible Soft PEX hoses, fixing pack and aerator key supplied in the box
• 20 year warranty (see the Caroma warranty document for what is covered)

Suits a single tap hole sink or bench. Check the clearance under the bench for the hoses and fixing stud, and ask your plumber if you're unsure.

If you'd rather a lower profile tap, the Caroma Acqua and Elegance sink mixers are in the same lead free brass.

Specifications

WELS water efficiency: 4 star
WELS water consumption: 7.5 litres a minute
WELS registration number: T18017
Watermark certification: WaterMark licence 020203
Construction material: Brass
Finish/coating: Chrome
Dimensions: 50 x 171 x 333 mm (W x D x H)
Country of origin: Vietnam
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Toilet seat wobbling or cracked at the hinge? The Caroma Pedigree II Toilet Seat in White is a heavy weight, compression moulded seat with a double flap and a flat underside, which makes it easier to wipe down. Buffers on the seat and the lid soften the noise when they drop. Metal adjustable hinges let you line it up with the pan holes, and blind fixings are standard, so there's no nut to reach under the pan rim. GermGard, Caroma's antibacterial additive, is in the seat plastic. Caroma rates it for homes and heavy duty commercial use, so it will cope with a full house. The seat is 355mm wide; check the fit against your pan before you order. Backed by a 5 year warranty (see the Caroma warranty document for what is covered). Made in China.

• Heavy weight compression moulded plastic, so it won't flex or creak
• Double flap with a flat underside that wipes clean in one pass
• Buffers on the seat and lid to take the bang out of a dropped lid
• Metal adjustable hinges that let you square the seat up to the pan
• Blind fixings standard, so it fits from the top without reaching under the pan
• GermGard antibacterial additive in the plastic
• 5 year warranty (see the Caroma warranty document for what is covered)

355mm wide. Measure your pan's hole spacing and seat length and check the fit against your pan before buying. Two allen keys are included for the install.

Caroma's Trident seat is the lighter, snap off alternative if you'd rather lift the seat for cleaning.

Specifications

Construction material: Plastic
Finish/coating: White
Dimensions: 355 x 0 x 25 mm (W x D x H)
Country of origin: China
Warranty: 5 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Kitchen or laundry mixer leaking at the base? The Caroma Acqua Sink Mixer in Chrome is a plain, solid kitchen and laundry mixer with a swivel spout and a lever handle that's easy to grip. The body is lead free brass (under 0.25% lead) that meets the new lead free WaterMark standard, and the chrome finish wipes clean. Inside is a 40mm ceramic disc cartridge with the flow regulated aerator already fitted. The spout reaches 224mm and the mixer sits 122mm high, so it suits a sink under a window or a wall cupboard. Water use is WELS 4 star at 7.5 litres a minute. Flexible hot and cold tails and the fixing pack come in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• Low 122mm body with a 224mm swivel spout, so it fits under a window sill or cupboard
• Lead free brass under 0.25% lead, which meets the new lead free WaterMark standard
• 40mm ceramic disc cartridge for smooth control and no drips
• Lever handle shaped for a quick grab with wet hands
• WELS 4 star at 7.5 litres a minute, flow regulated aerator fitted
• Two flexible tails and a two stud fixing pack in the box, ready for your plumber
• 20 year warranty (see the Caroma warranty document for what is covered)

Suits a single tap hole sink. Check the hole size and the clearance under the bench before you order.

Want something taller? The Caroma Cirrus gooseneck or Pin Lever sink mixers give you more height.

Specifications

WELS water efficiency: 4 star
WELS water consumption: 7.5 litres a minute
WELS registration number: T16858
Watermark certification: WaterMark licence 020203
Construction material: Brass
Finish/coating: Chrome
Dimensions: 48 x 224 x 122 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Laundry taps and spout past their best? The Caroma Elegance II Laundry Set in Chrome is a three piece set: hot and cold wall taps plus a swivel laundry outlet, so you can replace the lot in one go. The taps are lead free brass (under 0.25% lead) that meets the new lead free WaterMark standard, which matters when you're swapping out an older set. They run on copper jumper valves, so a drip is fixed with a washer rather than a new tap. WELS 4 star at 7.5 litres a minute, enough flow to fill a trough quickly. Flanges, handles, nuts, clips, a threaded nipple, inlet socket and a spanner all come in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• Hot and cold wall taps plus a swivel outlet in one box, so the whole trough set matches
• Lead free brass under 0.25% lead, which meets the new lead free WaterMark standard
• Copper jumper valves, so a worn washer is a quick fix rather than a replacement tap
• WELS 4 star at 7.5 litres a minute, a decent flow for filling buckets and the tub
• Swivel laundry outlet with a cover plate that swings clear of the trough
• Wall flanges, retaining nuts, clips and a spanner included for your plumber
• 20 year warranty (see the Caroma warranty document for what is covered)

Wall mounted over a laundry tub. Check your existing tap centres and breech before you order, or ask your plumber.

Elegance II also does washing machine stops, wall top assemblies and a bath outlet in Chrome.

Specifications

WELS water efficiency: 4 star
WELS water consumption: 7.5 litres a minute
WELS registration number: T18102
Watermark certification: WaterMark licence 020203
Construction material: Brass
Finish/coating: Chrome
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Bath spout pitted or dribbling down the tiles? The Caroma Elegance II Bath Outlet 180mm in Chrome is a fixed wall spout in brass with a rounded, understated shape that won't fight with the rest of the bathroom. The 180mm reach puts the water well into the bath rather than down the wall, and because it's a fixed outlet there's nothing to swivel loose over time. It pairs with the Elegance II wall top assemblies and shower set, so the whole bathroom can match. The spout comes in the box with the technical manual, and Caroma also makes it in a second length if you need more reach. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 180mm reach that lands the water in the bath, not on the wall
• Fixed outlet with nothing to work loose, so it stays put for years
• Brass construction under a chrome finish
• Rounded shape that matches the Elegance II taps and accessories
• One of two lengths in the range, so you can choose the reach that suits your bath
• 20 year warranty (see the Caroma warranty document for what is covered)

Wall mounted onto a standard threaded outlet. Ask your plumber to check the height above the bath rim before fixing.

Team it with the Elegance II wall top assemblies for a matching three piece bath set.

Specifications

Construction material: Brass
Finish/coating: Chrome
Dimensions: 60 x 225 x 60 mm (W x D x H)
Watermark certification: WaterMark licence 020203
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Shower taps stiff and dripping? The Caroma Elegance II Shower Set in Chrome is the three piece answer: hot and cold wall taps plus a fixed shower outlet, all in one box. It's a straight swap for a traditional two tap shower, with no mixer body to chase into the wall. The taps are brass and run on copper jumper valves, so when a washer wears you replace the washer, not the tap. The set is WELS 3 star rated at 9.0 litres a minute, a generous flow for a shower. Wall flanges, handles, nuts, clips, a threaded nipple, inlet socket and a spanner are included. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• Two tap head assemblies plus a fixed shower outlet, so the set matches from the start
• Brass construction built for daily use
• Copper jumper valves that take a standard washer when a drip starts
• WELS 3 star at 9.0 litres a minute, so the flow stays strong
• Fixed shower outlet with a cover plate that hides the wall penetration
• Flanges, handles, retaining nuts, clips and a spanner in the box
• 20 year warranty (see the Caroma warranty document for what is covered)

Wall mounted. Check your shower rose or arm has a standard connection to the outlet, and ask your plumber about tap centres.

Add the Elegance II bath outlet and wall top assemblies for the rest of the bathroom.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 litres a minute
WELS registration number: S07555
Watermark certification: WaterMark licence 020203
Construction material: Brass
Finish/coating: Chrome
Dimensions: 64 x 74 x 75 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a short grab rail for a tight spot? The Caroma Home Collection Straight Grab Rail 300mm in White adds a steady handhold where space is limited, such as beside a basin or near the shower entry. It's 32mm diameter 304L stainless steel, fixed with concealed CLAM flanges 75mm across, so the fixings stay hidden. It's built to withstand 1100N of force and manufactured to comply with the grab rail requirements of AS1428.1-2009 for access and mobility. The white finish keeps it low-key in a white bathroom, and it's suited to both home and health care use. A fixing kit is included. If you need a longer rail, the Home Collection also comes in a 450mm white length.

• 300mm length for tight spots where a longer rail won't fit
• 32mm diameter 304L stainless steel that's easy to grip
• 75mm concealed CLAM flanges that hide the fixings
• Built to withstand 1100N of force for dependable support
• Manufactured to comply with AS1428.1-2009 grab rail requirements, useful for accessible fit-outs
• White finish that blends in with white tiles and fittings

Fix it into solid backing or noggings so it can take full weight, and get a qualified installer if you're unsure.

Pair it with a longer rail from the Caroma Home Collection for the bath or toilet.

What's In The Box

• Fixing Kit

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a long rail beside the bath or along the shower wall? The Caroma Home Collection Straight Grab Rail 900mm in Chrome gives a long, continuous handhold, useful along a shower wall or beside the bath where you need support over a few steps. It's 32mm 304L stainless steel tube, mounted on 75mm concealed CLAM flanges, so the fixings stay out of sight. Caroma makes it to comply with the AS1428.1-2009 grab rail requirements, and it's built to withstand 1100N of force. It suits family homes as well as health care settings, and it looks like part of the bathroom rather than an afterthought. A fixing kit is included, so your installer can get straight to it.

• 900mm length for support along a shower wall or beside a bath
• Chrome finished 304L stainless steel, 32mm across
• 75mm concealed CLAM flanges that keep the fixings hidden
• Made to comply with AS1428.1-2009 grab rail requirements
• Withstands 1100N of force
• Fixing kit included

Fix it into solid backing, and check the height and position with your installer if you need AS1428.1 compliance.

The Home Collection also has 300mm and 600mm straight rails in chrome.

What's In The Box

• Fixing Kit

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages