Raymor Projix Inset Bath 1525mm White

Bath past its best and you don't want to rebuild the hob? The Raymor Projix Inset Bath 1525mm in White is a simple like for like swap. It's a tile flange bath, so it drops into the hob and your tiler runs the tiles over the flange on all four edges. At 1525mm long, 725mm wide and 380mm high it's a shallower bath that's easy to step into. The waste is at the end and there's no overflow, so keep the tap in sight while it fills. The plug and waste isn't supplied, so add one to your order. It's Australian made acrylic with a steel reinforced rim, and the warranty runs 15 years on the bath with 1 year on labour.

• Inset bath with a 4 edge tile bead, so it tiles into a hob on all sides
• 1525mm long, 725mm wide and 380mm high, which suits a narrower hob
• Lower 380mm height that is easier for kids and older family members to get in and out of
• End waste with no overflow, so match it to your existing floor waste
• Steel reinforced rim to keep the edge rigid once tiled
• Plug and waste not included, so buy one with the bath
• Made in Australia, with a 15 year warranty on the bath and 1 year on labour

Measure the inside of your hob before ordering. Ask your plumber to confirm the end waste position lines up.

Add a Raymor bath pop-up plug and waste and pair it with Projix bath tapware.

Construction material: Acrylic
Colour: White
Length: 1525mm
Width: 725mm
Height: 380 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

• 1 x Inset Bath
• Installation instructions