Raymor Bathroom Accessories

Need a couple of hooks that match square tapware? The Raymor Edge II Robe Hook in Brushed Nickel is a slim single hook with a square profile, made to hang a towel or robe next to the shower or behind the door. It's small, 53mm high and just 33mm off the wall, so it tucks in where a bigger hook would get in the way. Solid brass in a brushed nickel finish. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• Slim square hook, so it fits on a narrow strip of wall or tile
• Solid brass that won't bend under a wet bath towel
• Brushed nickel finish that matches Edge II tapware and rails
• 33mm projection, which keeps it low profile in a tight space
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed. Use a wall plug in plasterboard or tiles and check for pipes before drilling.

Grab two or three, then match them with Edge II towel rails, roll holders and a soap dish in the same finish.

Specifications

Construction material: Brass
Overall length: 19 mm
Projection: 33 mm
Height: 53 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Fixing Kit
• Installation Instructions

Kitting out a new ensuite and want the toilet to match the taps? The Raymor Edge II Toilet Roll Holder in Brushed Nickel is a single arm holder with a square profile, made for bathrooms with Edge II or other angular tapware. It's solid brass in a brushed nickel finish, so nothing snaps or rusts. It's 174mm wide and sits 72.5mm out from the wall, taking a standard roll you can swap with one hand. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• Single arm, so changing the roll is a one-handed job
• Solid brass body that stays firm and won't corrode in a damp toilet
• Square profile with a brushed nickel finish that lines up with Edge II tapware
• 174mm wide and 72.5mm off the wall, which keeps it neat in a narrow toilet
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it where you can reach it from the seat, and check for pipes before you drill.

Prefer somewhere to rest your phone? The Edge II Roll Holder with Shelf does that. Otherwise match this one with Edge II robe hooks and towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 206 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions

After a wide double rail with square lines? The Raymor Edge II Double Towel Rail 785mm in Brushed Nickel is the longer Edge II double rail, with twin square bars stretching 785mm along the wall. Hang two bath sheets flat, or towels behind and a bath mat in front. Both bars sit 120mm from the wall so nothing sits damp against the tiles. It's solid brass throughout with a brushed nickel finish, instructions included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• 785mm long, so two bath sheets hang flat without overlapping
• Twin square bars on one set of fixings, for double the towel space
• Solid brass build with a brushed nickel finish that handles a steamy main bathroom
• 120mm projection that keeps both towels clear of the wall and each other
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long needs solid fixing at both ends, so find the studs or use good tile anchors.

Wall too short? The Edge II double rail also comes at 635mm, with single rails, hooks and roll holders to match.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Replacing a rail and want square lines to match the taps? The Raymor Edge II Double Towel Rail 635mm in Brushed Nickel puts two square bars side by side on one bracket, so a pair of bath towels dry flat instead of overlapping. The 635mm width suits an ensuite or a smaller bathroom, and the 120mm projection leaves room between the bars for air to move. It's solid brass under a brushed nickel finish, with installation instructions supplied. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome, and in a 785mm length.

• Two bars side by side, which doubles your hanging space on one wall
• 635mm wide, a sensible fit for an ensuite or a compact bathroom
• Solid brass with a brushed nickel finish that won't tarnish in steam
• 120mm projection, so both towels get airflow and dry properly
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use decent anchors in tile, and ask your handyman or plumber if you're not sure.

Match it with Edge II single rails, robe hooks and roll holders, or step up to the 785mm double rail for a longer wall.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Matching the accessories to square Edge II tapware? The Raymor Edge II Single Towel Rail 635mm in Brushed Nickel is a straight, square-profile rail that takes one bath towel with room to spare. It's solid brass with a brushed nickel finish, so it won't sag or rust over the years. At 635mm wide, 24mm high and 71.5mm deep it sits close to the wall and clears a swinging door in most bathrooms. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Chrome.

• Solid brass rail, so it stays straight under a wet bath towel
• 635mm wide, which fits a full size bath towel folded once
• 71.5mm projection that keeps the towel off the wall to dry
• Brushed nickel finish that wipes clean and matches Edge II tapware
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use the right anchors for tile and plasterboard, and check for pipes before drilling.

Edge II also does a 785mm rail, shelves, roll holders and square tapware in the same three finishes.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Hand towel always ending up on the vanity? The Raymor Edge II Hand Towel Holder in Brushed Nickel is a short, squared rail sized for a hand towel next to the basin, in an ensuite or a powder room where a full rail won't fit. It's brass with a brushed nickel finish, so it shrugs off wet hands and cleaning. At 239mm wide, 30mm high and 72.5mm deep it sits neatly under a mirror or beside the vanity. Fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• 239mm rail sized for a hand towel, which suits powder rooms and tight ensuites
• Brass build with a brushed nickel finish that resists tarnish and wipes clean
• 72.5mm projection, so the towel hangs clear of the wall and dries faster
• Fixing kit and installation instructions supplied
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with the supplied fixings. Check for pipes and cables before you drill next to the basin.

Match it with Edge II full towel rails, the soap holder, robe hooks and square tapware.

Specifications

Construction material: Brass
Overall length: 239 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel holder
• Fixing Kit
• Installation Instructions

Soap sliding around the edge of the basin? The Raymor Edge II Soap Holder in Brushed Nickel gives a bar of soap a proper home on the wall, out of the puddle. Squared like the rest of the Edge II range, it's brass with a brushed nickel finish, so it won't stain or corrode. It's 206mm wide, 24mm high and 120mm deep, which suits a shower wall or the space beside the basin. A fixing kit and installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• Wall-mounted soap dish, so the bar dries between uses instead of sitting in water
• Brass construction with a brushed nickel finish that holds up in the shower
• 206mm wide and 120mm deep, enough for a full bar without crowding the wall
• Fixing kit and installation instructions included, ready for a quick fit
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall using the supplied kit. Use tile plugs on tiled walls and check for pipes before drilling.

Edge II also covers towel rails, shelves, hand towel holders and square tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 206 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Soap holder
• Fixing Kit
• Installation Instructions

Main bathroom with a long wall and a lot of towels? The Raymor Edge II Double Towel Rail 785mm in Chrome is the longer Edge II double rail, with twin square bars stretching 785mm along the wall. Hang two bath sheets flat, or towels behind and a bath mat in front. Both bars sit 120mm from the wall so nothing sits damp against the tiles. It's solid brass throughout with a chrome finish, instructions included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• 785mm long, so two bath sheets hang flat without overlapping
• Twin square bars on one set of fixings, for double the towel space
• Solid brass build with a chrome finish that handles a steamy main bathroom
• 120mm projection that keeps both towels clear of the wall and each other
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long needs solid fixing at both ends, so find the studs or use good tile anchors.

Wall too short? The Edge II double rail also comes at 635mm, with single rails, hooks and roll holders to match.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Door handle doubling as a towel hook? The Raymor Edge II Robe Hook in Chrome is a slim single hook with a square profile, made to hang a towel or robe next to the shower or behind the door. It's small, 53mm high and just 33mm off the wall, so it tucks in where a bigger hook would get in the way. Solid brass in a chrome finish. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• Slim square hook, so it fits on a narrow strip of wall or tile
• Solid brass that won't bend under a wet bath towel
• Chrome finish that matches Edge II tapware and rails
• 33mm projection, which keeps it low profile in a tight space
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed. Use a wall plug in plasterboard or tiles and check for pipes before drilling.

Grab two or three, then match them with Edge II towel rails, roll holders and a soap dish in the same finish.

Specifications

Construction material: Brass
Overall length: 19 mm
Projection: 33 mm
Height: 53 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Installation Instructions

Swapping out the old loo fittings for something square and simple? The Raymor Edge II Toilet Roll Holder in Chrome is a single arm holder with a square profile, made for bathrooms with Edge II or other angular tapware. It's solid brass in a chrome finish, so nothing snaps or rusts. It's 174mm wide and sits 72.5mm out from the wall, taking a standard roll you can swap with one hand. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• Single arm, so changing the roll is a one-handed job
• Solid brass body that stays firm and won't corrode in a damp toilet
• Square profile with a chrome finish that lines up with Edge II tapware
• 174mm wide and 72.5mm off the wall, which keeps it neat in a narrow toilet
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it where you can reach it from the seat, and check for pipes before you drill.

Prefer somewhere to rest your phone? The Edge II Roll Holder with Shelf does that. Otherwise match this one with Edge II robe hooks and towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 174 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Bath towel too big for the rail you've got? The Raymor Edge II Single Towel Rail 635mm in Chrome is a straight, square-profile rail that takes one bath towel with room to spare. It's solid brass with a chrome finish, so it won't sag or rust over the years. At 635mm wide, 24mm high and 71.5mm deep it sits close to the wall and clears a swinging door in most bathrooms. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Solid brass rail, so it stays straight under a wet bath towel
• 635mm wide, which fits a full size bath towel folded once
• 71.5mm projection that keeps the towel off the wall to dry
• Chrome finish that wipes clean and matches Edge II tapware
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use the right anchors for tile and plasterboard, and check for pipes before drilling.

Edge II also does a 785mm rail, shelves, roll holders and square tapware in the same three finishes.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Bathroom wall too narrow for a long rail but you still need two? The Raymor Edge II Double Towel Rail 635mm in Chrome puts two square bars side by side on one bracket, so a pair of bath towels dry flat instead of overlapping. The 635mm width suits an ensuite or a smaller bathroom, and the 120mm projection leaves room between the bars for air to move. It's solid brass under a chrome finish, with installation instructions supplied. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel, and in a 785mm length.

• Two bars side by side, which doubles your hanging space on one wall
• 635mm wide, a sensible fit for an ensuite or a compact bathroom
• Solid brass with a chrome finish that won't tarnish in steam
• 120mm projection, so both towels get airflow and dry properly
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use decent anchors in tile, and ask your handyman or plumber if you're not sure.

Match it with Edge II single rails, robe hooks and roll holders, or step up to the 785mm double rail for a longer wall.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Old rail too short for the wall above the bath? The Raymor Edge II Single Towel Rail 785mm in Chrome is the longer rail in the range, wide enough for a bath sheet or two hand towels side by side on one bar. The squared profile suits square tapware and modern vanities. Brass all the way through, with a chrome finish that stands up to steam, it's 785mm wide, 24mm high and sits 71.5mm off the wall. Installation instructions are included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• 785mm wide, so a bath sheet or two hand towels hang flat on one bar
• Brass construction that won't bow or corrode in a steamy bathroom
• Low 24mm profile with a 71.5mm projection, keeping it neat but clear of the wall
• Chrome finish to tie in with Edge II mixers and accessories
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall. Long rails need both ends anchored properly, so find studs or use tile-rated plugs, or get your plumber or handyman to fit it.

Team it with the 635mm Edge II rail, robe hooks, roll holders and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Finishing off a toilet or ensuite and want the small stuff to match? The Raymor Edge II Toilet Roll Holder with Shelf in Brushed Nickel does two jobs in one: it holds the roll and gives you a small ledge on top for a phone or spare roll. The squared shape sits well next to square tapware. It's stainless steel with a brushed nickel finish, and at 197mm wide, 80mm high and 120mm deep it fits most walls without getting in the way. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Black.

• Roll holder and shelf in one unit, so you get somewhere to rest a phone or spare roll
• Stainless steel body that won't rust in a damp toilet or ensuite
• Brushed nickel finish that wipes clean and matches Edge II tapware and accessories
• 197mm wide with a 120mm projection, which keeps it clear of a swinging door
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Check what's behind the wall before you drill, or leave it to your plumber or handyman.

Pair it with Edge II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Stainless Steel
Overall length: 197 mm
Projection: 120 mm
Height: 80 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes

What's In The Box

• 1 x Edge Roll Holder with Shelf
• Installation Instructions

Roll holder hanging off the wall by one screw? The Raymor Edge II Toilet Roll Holder with Shelf in Black does two jobs in one: it holds the roll and gives you a small ledge on top for a phone or spare roll. The squared shape sits well next to square tapware. It's stainless steel with a black finish, and at 197mm wide, 80mm high and 120mm deep it fits most walls without getting in the way. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• Roll holder and shelf in one unit, so you get somewhere to rest a phone or spare roll
• Stainless steel body that won't rust in a damp toilet or ensuite
• Black finish that wipes clean and matches Edge II tapware and accessories
• 197mm wide with a 120mm projection, which keeps it clear of a swinging door
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Check what's behind the wall before you drill, or leave it to your plumber or handyman.

Pair it with Edge II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Stainless Steel
Overall length: 197 mm
Projection: 120 mm
Height: 80 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes

What's In The Box

• 1 x Edge Roll Holder with Shelf
• Installation Instructions

Need a shower seat that gets out of the way after use? The Raymor Care Folding Shower Seat 600 x 400mm in Polished Stainless Steel bolts to the wall and folds up flat when it's not needed, so the shower still works for everyone else. The frame is 304 grade stainless steel and the seat is a UV stabilised HDPE deck with channels that drain water off. Tension hinges hold it up, and it's rated to 160kg. It measures 600mm wide, 400mm deep and 480mm high, with screws and installation instructions included. Backed by 20 years domestic on mechanical parts, 7 years commercial. Also available in Stainless Steel.

• Folds up against the wall on tension hinges, so it doesn't take over a shared shower
• 304 grade stainless steel frame in a polished stainless steel finish that stands up to daily soaking
• HDPE seat deck with drainage channels, which won't hold water or fade in the sun
• Rated to 160kg for solid everyday support
• 20 year domestic warranty on mechanical parts, 7 years for commercial installs

A shower seat takes real weight, so it must go into studs or a reinforced wall. Have your builder or plumber fit it at a height that suits the user.

Add Care grab rails, a Care hand shower and tapware from the same range.

Specifications

Construction material: 304 Grade Stainless Steel Frame, HDPE Seat Deck
Overall length: 600 mm
Projection: 400 mm
Height: 480 mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Seat
• Stainless steel fixing screws
• Installation instructions

Want a rail that does the hard work of standing up from the toilet? The Raymor Care Grab Rail 40 Degree RH 870 x 700mm in Polished Stainless Steel is the right-hand toilet rail from the Care range. The 870mm section runs level beside the pan, then angles up at 40 degrees for 700mm, so there's something to push against when rising and something to hold once up. It's 304 grade stainless steel, 32mm across, 55mm off the wall on concealed clam flanges, 1515mm long and 580mm high, and meets AS 1428.1:2021. Backed by 20 years domestic on mechanical parts, 7 years commercial. Also available in Brushed Stainless Steel.

• Right-hand 40 degree rail for toilets where the wall is on the right, sized 870 x 700mm
• One-piece 304 grade stainless steel, which won't rust or stain in a bathroom
• 55mm wall clearance and a 32mm rail, so a whole hand fits around it comfortably
• Concealed mount clam flanges finished in polished stainless steel to hide the screws
• Meets AS 1428.1:2021, backed by 20 years domestic and 7 years commercial on mechanical parts

Make sure right-hand is the side you need. Fixing must be into studs or a reinforced wall; leave installation to your builder or plumber.

See the left-hand rail, straight and corner rails, shower seats and Care tapware to finish the room.

Specifications

Construction material: 304 Stainless Steel
Overall length: 1515 mm
Projection: 87 mm
Height: 580 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Looking for the long angled rail beside a toilet on the left? The Raymor Care Grab Rail 40 Degree LH 870 x 700mm in Polished Stainless Steel is the left-hand version of the long toilet rail: an 870mm horizontal run rising at 40 degrees into a 700mm section, for a push up from seated and a steadying hand once standing. It's 304 grade stainless steel, 32mm in diameter, 55mm off the wall, with clam flanges hiding the screws. Overall it's 1515mm long and 580mm high, and made to meet AS 1428.1:2021. Backed by a 20 year domestic warranty on mechanical parts, 7 years commercial. Also available in Brushed Stainless Steel.

• Left-hand 40 degree rail, 870 x 700mm, shaped for getting on and off a toilet with the wall on your left
• 304 grade stainless steel in a polished stainless steel finish, so it stays clean and won't corrode
• 32mm rail with 55mm wall clearance for a firm grip along the whole length
• Clam flange concealed mounting that keeps the screw heads covered
• Made to meet AS 1428.1:2021, with 20 years domestic and 7 years commercial warranty on mechanical parts

Check which side you need before ordering: this is the left-hand rail. It must go into studs or a reinforced wall, so have your builder or plumber install it.

The right-hand version, straight rails, folding shower seats and Care toilets are all in the same range.

Specifications

Construction material: 304 Stainless Steel
Overall length: 1515 mm
Projection: 87 mm
Height: 580 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Standing in the shower getting harder than it used to be? The Raymor Care Folding Shower Seat 600 x 400mm in Stainless Steel bolts to the wall and folds up flat when it's not needed, so the shower still works for everyone else. The frame is 304 grade stainless steel and the seat is a UV stabilised HDPE deck with channels that drain water off. Tension hinges hold it up, and it's rated to 160kg. It measures 600mm wide, 400mm deep and 480mm high, with screws and installation instructions included. Backed by 20 years domestic on mechanical parts, 7 years commercial. Also available in Polished Stainless Steel.

• Folds up against the wall on tension hinges, so it doesn't take over a shared shower
• 304 grade stainless steel frame in a stainless steel finish that stands up to daily soaking
• HDPE seat deck with drainage channels, which won't hold water or fade in the sun
• Rated to 160kg for solid everyday support
• 20 year domestic warranty on mechanical parts, 7 years for commercial installs

A shower seat takes real weight, so it must go into studs or a reinforced wall. Have your builder or plumber fit it at a height that suits the user.

Add Care grab rails, a Care hand shower and tapware from the same range.

Specifications

Construction material: 304 Grade Stainless Steel Frame, HDPE Seat Deck
Overall length: 600 mm
Projection: 400 mm
Height: 480 mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Seat
• Stainless steel fixing screws
• Installation instructions

After a rail that helps with standing up and stepping sideways? The Raymor Care Grab Rail 90 Degree 450 x 450mm in Polished Stainless Steel is an L-shaped rail with a 450mm horizontal arm and a 450mm vertical one, so it fits a shower corner or beside a toilet and helps with pulling up as well as steadying. It's 304 grade stainless steel, 32mm in diameter, 55mm off the wall, with clam flanges covering the screws, and 528 x 528mm overall. Made to meet AS 1428.1:2021 for accessible and commercial bathrooms. Backed by 20 years domestic on mechanical parts, 7 years commercial. Also available in Brushed Stainless Steel.

• 90 degree shape with 450mm arms, which gives a horizontal and a vertical hold in one rail
• 304 grade stainless steel with a polished stainless steel finish that handles constant water and soap
• 32mm rail and 55mm clearance from the wall, so fingers wrap right around it
• Concealed mount clam flanges that keep the fixings out of sight
• Meets AS 1428.1:2021, backed by 20 years domestic and 7 years commercial on mechanical parts

Corner rails carry a lot of load, so fix it into studs or a reinforced wall and let your builder or plumber set the height and orientation.

Team it with Care straight rails, the 40 degree angled rails, folding shower seats and Care showers.

Specifications

Construction material: 304 Stainless Steel
Overall length: 528 mm
Projection: 87 mm
Height: 528 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Need support in the shower corner, not just along one wall? The Raymor Care Grab Rail 90 Degree 450 x 450mm in Brushed Stainless Steel is an L-shaped rail with a 450mm horizontal arm and a 450mm vertical one, so it fits a shower corner or beside a toilet and helps with pulling up as well as steadying. It's 304 grade stainless steel, 32mm in diameter, 55mm off the wall, with clam flanges covering the screws, and 528 x 528mm overall. Made to meet AS 1428.1:2021 for accessible and commercial bathrooms. Backed by 20 years domestic on mechanical parts, 7 years commercial. Also available in Polished Stainless Steel.

• 90 degree shape with 450mm arms, which gives a horizontal and a vertical hold in one rail
• 304 grade stainless steel with a brushed stainless steel finish that handles constant water and soap
• 32mm rail and 55mm clearance from the wall, so fingers wrap right around it
• Concealed mount clam flanges that keep the fixings out of sight
• Meets AS 1428.1:2021, backed by 20 years domestic and 7 years commercial on mechanical parts

Corner rails carry a lot of load, so fix it into studs or a reinforced wall and let your builder or plumber set the height and orientation.

Team it with Care straight rails, the 40 degree angled rails, folding shower seats and Care showers.

Specifications

Construction material: 304 Stainless Steel
Overall length: 528 mm
Projection: 87 mm
Height: 528 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Want a towel rail that won't come off if someone leans on it? The Raymor Care Grab Rail Straight with Towel Rail 600mm in Polished Stainless Steel combines a 600mm support rail and a towel rail in one fitting, so the towel hangs where it's needed and the rail is there to hold. Both are 304 grade stainless steel. The 32mm grab rail sits 55mm off the wall, clam flanges hide the fixings, and it spans 678mm overall. Made to meet AS 1428.1:2021 for accessible and commercial bathrooms. Backed by a 20 year domestic warranty on mechanical parts, 7 years commercial. Also available in Brushed Stainless Steel.

• Grab rail and towel rail in a single unit, which saves wall space in a smaller bathroom
• 304 grade stainless steel throughout, so the towel rail won't rust from damp towels
• 32mm support rail with 55mm wall clearance for a secure hold
• Clam flanges with concealed fixings in a polished stainless steel finish, so it looks like a normal towel rail
• Made to meet AS 1428.1:2021, with 20 years domestic and 7 years commercial warranty on mechanical parts

Because it doubles as a grab rail, it must be fixed into studs or a reinforced wall. Have your builder or plumber install it at the right height.

Match it with Care straight and angled grab rails, a folding shower seat and Care tapware.

Specifications

Construction material: 304 Stainless Steel
Overall length: 678 mm
Projection: 87 mm
Height: 78 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Short on wall space for a grab rail and a towel rail? The Raymor Care Grab Rail Straight with Towel Rail 600mm in Brushed Stainless Steel combines a 600mm support rail and a towel rail in one fitting, so the towel hangs where it's needed and the rail is there to hold. Both are 304 grade stainless steel. The 32mm grab rail sits 55mm off the wall, clam flanges hide the fixings, and it spans 678mm overall. Made to meet AS 1428.1:2021 for accessible and commercial bathrooms. Backed by a 20 year domestic warranty on mechanical parts, 7 years commercial. Also available in Polished Stainless Steel.

• Grab rail and towel rail in a single unit, which saves wall space in a smaller bathroom
• 304 grade stainless steel throughout, so the towel rail won't rust from damp towels
• 32mm support rail with 55mm wall clearance for a secure hold
• Clam flanges with concealed fixings in a brushed stainless steel finish, so it looks like a normal towel rail
• Made to meet AS 1428.1:2021, with 20 years domestic and 7 years commercial warranty on mechanical parts

Because it doubles as a grab rail, it must be fixed into studs or a reinforced wall. Have your builder or plumber install it at the right height.

Match it with Care straight and angled grab rails, a folding shower seat and Care tapware.

Specifications

Construction material: 304 Stainless Steel
Overall length: 678 mm
Projection: 87 mm
Height: 78 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Setting up a bathroom so a parent can stay in their own home? The Raymor Care Grab Rail Straight 450mm in Polished Stainless Steel is a 450mm straight rail in 304 grade stainless steel, sized for beside a toilet or along a shower wall. The 32mm rail stands 55mm off the wall for a full grip, and clam flanges cover the screw heads. It's 528mm wide across the flanges. Made to meet AS 1428.1:2021, it suits accessible home bathrooms and commercial fit-outs. Screws and installation instructions are included. Backed by a 20 year domestic warranty on mechanical parts, 7 years commercial. Also available in Brushed Stainless Steel.

• 450mm straight rail that gives a longer reach than a 300mm rail, handy beside a toilet or in a shower
• 304 grade stainless steel in a polished stainless steel finish, so it shrugs off steam and cleaning products
• 32mm diameter with 55mm wall clearance, which leaves room for a firm hold with a wet hand
• Clam flanges with concealed mounting, so the screws are hidden once it's on the wall
• Made to meet AS 1428.1:2021, with a 20 year domestic and 7 year commercial warranty on mechanical parts

It needs solid fixing into studs, noggins or a reinforced wall, so have a builder or plumber fit it and set the height for the person using it.

The Care range also covers 300mm and 600mm straight rails, angled rails, shower seats and tapware.

Specifications

Construction material: 304 Stainless Steel
Overall length: 582 mm
Projection: 87 mm
Height: 78 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Want a rail beside the toilet long enough for a two-handed pull-up? The Raymor Care Grab Rail Straight 450mm in Brushed Stainless Steel is a 450mm straight rail in 304 grade stainless steel, sized for beside a toilet or along a shower wall. The 32mm rail stands 55mm off the wall for a full grip, and clam flanges cover the screw heads. It's 528mm wide across the flanges. Made to meet AS 1428.1:2021, it suits accessible home bathrooms and commercial fit-outs. Screws and installation instructions are included. Backed by a 20 year domestic warranty on mechanical parts, 7 years commercial. Also available in Polished Stainless Steel.

• 450mm straight rail that gives a longer reach than a 300mm rail, handy beside a toilet or in a shower
• 304 grade stainless steel in a brushed stainless steel finish, so it shrugs off steam and cleaning products
• 32mm diameter with 55mm wall clearance, which leaves room for a firm hold with a wet hand
• Clam flanges with concealed mounting, so the screws are hidden once it's on the wall
• Made to meet AS 1428.1:2021, with a 20 year domestic and 7 year commercial warranty on mechanical parts

It needs solid fixing into studs, noggins or a reinforced wall, so have a builder or plumber fit it and set the height for the person using it.

The Care range also covers 300mm and 600mm straight rails, angled rails, shower seats and tapware.

Specifications

Construction material: 304 Stainless Steel
Overall length: 528 mm
Projection: 87 mm
Height: 78 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Fitting out a bathroom so someone can keep living at home safely? The Raymor Care Grab Rail Straight 300mm in Polished Stainless Steel is a straight 32mm rail in 304 grade stainless steel, made to meet AS 1428.1:2021, so it suits accessible bathrooms at home and commercial fit-outs alike. Clam flanges hide the screw heads, and 55mm of wall clearance leaves room for a firm grip. Overall width is 378mm across the flanges. Stainless steel screws and installation instructions come in the box. Backed by a 20 year warranty on mechanical parts for domestic installs, 7 years for commercial. Also available in Brushed Stainless Steel.

• 304 grade stainless steel, so it won't corrode in a wet area
• 32mm rail with 55mm wall clearance for a full, comfortable hold
• Clam flange with a concealed mount, which hides the fixings from view
• Made to meet AS 1428.1:2021 for accessible home and commercial bathrooms, in a polished stainless steel finish
• 20 year domestic warranty on mechanical parts, 7 years for commercial installs

Grab rails need solid fixing into noggins or a reinforced wall, so have your builder or plumber fit it and confirm the mounting height for your setup.

The Care range also covers longer straight rails, angled rails, shower seats, taps and toilets.

Specifications

Construction material: 304 Stainless Steel
Overall length: 378 mm
Projection: 87 mm
Height: 78 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Fitting out a wet area that needs support along the whole wall? The Raymor Care Grab Rail Straight 600mm in Polished Stainless Steel is the longest straight Care rail, so it covers more wall for someone moving along a shower or beside a bath. It's 304 grade stainless steel, a 32mm rail with 55mm of wall clearance, and measures 678mm overall across clam flanges that hide the fixings. Made to meet AS 1428.1:2021 for accessible home bathrooms and commercial fit-outs. Screws and installation instructions are in the box. Backed by a 20 year domestic warranty on mechanical parts, 7 years commercial. Also available in Brushed Stainless Steel.

• 600mm rail length, so it supports a few steps along a wall rather than a single grab point
• 304 grade stainless steel that won't corrode in a shower or wet room
• 55mm wall clearance on a 32mm rail for a comfortable, full-hand grip
• Concealed mount clam flanges in a polished stainless steel finish that hide the screw heads
• Meets AS 1428.1:2021, backed by 20 years domestic and 7 years commercial on mechanical parts

Fix it into studs, noggins or a reinforced wall only. Ask your builder or plumber to install it and confirm the right height and angle.

Pair it with the Care 90 degree corner rail, folding shower seat and Care taps for a complete accessible bathroom.

Specifications

Construction material: 304 Stainless Steel
Overall length: 678 mm
Projection: 87 mm
Height: 78 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Need a longer rail to get from the shower door to the seat? The Raymor Care Grab Rail Straight 600mm in Brushed Stainless Steel is the longest straight Care rail, so it covers more wall for someone moving along a shower or beside a bath. It's 304 grade stainless steel, a 32mm rail with 55mm of wall clearance, and measures 678mm overall across clam flanges that hide the fixings. Made to meet AS 1428.1:2021 for accessible home bathrooms and commercial fit-outs. Screws and installation instructions are in the box. Backed by a 20 year domestic warranty on mechanical parts, 7 years commercial. Also available in Polished Stainless Steel.

• 600mm rail length, so it supports a few steps along a wall rather than a single grab point
• 304 grade stainless steel that won't corrode in a shower or wet room
• 55mm wall clearance on a 32mm rail for a comfortable, full-hand grip
• Concealed mount clam flanges in a brushed stainless steel finish that hide the screw heads
• Meets AS 1428.1:2021, backed by 20 years domestic and 7 years commercial on mechanical parts

Fix it into studs, noggins or a reinforced wall only. Ask your builder or plumber to install it and confirm the right height and angle.

Pair it with the Care 90 degree corner rail, folding shower seat and Care taps for a complete accessible bathroom.

Specifications

Construction material: 304 Stainless Steel
Overall length: 678 mm
Projection: 87 mm
Height: 78 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Want the loo to match the round taps in the rest of the bathroom? The Raymor Boston II Toilet Roll Holder in Chrome is a single arm holder with a rounded rail, made to sit alongside curved tapware. It's solid brass under a chrome finish, so it won't flex or rust in a damp toilet. At 159.5mm wide and 91.5mm deep it takes a standard roll, and swapping it is a one-handed job. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• Open arm design, so changing the roll takes one hand and no fiddling
• Solid brass body that stays rigid and won't corrode in a small, damp room
• Chrome finish with a rounded rail that suits Boston II and other curved tapware
• 159.5mm wide with a 91.5mm projection, which fits a full roll without crowding the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it within easy reach of the toilet and check for pipes and cables before drilling.

Match it with Boston II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 159.5 mm
Projection: 91.5 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Family of four fighting over one rail? The Raymor Boston II Double Towel Rail 850mm in Chrome is the longer of the two Boston II double rails, with twin round bars across 850mm of wall. That's room for two bath sheets hung flat, or towels and a bath mat. The bars sit 118mm out from the wall, so air gets around both. It's brass all the way through with a chrome finish, and installation instructions come with the rail. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• 850mm long, so two bath sheets hang flat without overlapping
• Twin bars for double the hanging space on one set of fixings
• Brass throughout in a chrome finish, made to shrug off a steamy bathroom
• 118mm projection that lets air move around both towels
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long wants solid fixing, so find the studs or use good anchors in tiles.

If 850mm is too wide, the Boston II double rail also comes at 650mm, with matching single rails and hooks.

Specifications

Construction material: Brass
Overall length: 850 mm
Projection: 118 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Need a hook for the kids' towels at the right height? The Raymor Boston II Robe Hook in Chrome gives a towel or dressing gown its own spot on the wall, and a row at different heights sorts out a family bathroom. It's a single brass hook with a rounded profile and a chrome finish, 52mm wide, 60.5mm high and standing 71.5mm off the wall so a thick towel hangs without sliding off. Installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• One hook per towel or robe, handy behind the door or next to the shower screen
• Brass build with a rounded profile, which won't snag towels or rust
• Chrome finish that ties in with Boston II tapware and other curved ranges
• 71.5mm projection, so a heavy bath towel stays on the hook
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed. A wall plug in tiles or plasterboard is all it needs, but check for pipes first.

Boston II also does towel rails, roll holders and hand towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 52 mm
Projection: 71.5 mm
Height: 60.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Installation Instructions

Ensuite wall too short for a full length rail? The Raymor Boston II Towel Rail Single 650mm in Chrome is a straightforward single bar for one bath towel, or two hand towels side by side. The 650mm length suits an ensuite or the gap between shower screen and vanity, and it stands 72mm off the wall so the towel dries rather than sweats. It's solid brass under a chrome finish. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel, and in an 850mm length.

• 650mm single bar, the right size for one bath towel or two hand towels
• Solid brass rail that won't bow under a heavy wet towel
• Chrome finish on a round bar that sits well with curved tapware
• 72mm projection, so the rail hugs the wall in a tight space
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use tile anchors, and check for pipes before you drill.

Need more hanging space? Look at the Boston II double rails, or add a robe hook or two in the same finish.

Specifications

Construction material: Brass
Overall length: 650 mm
Projection: 72 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions