Raymor Bathroom Accessories

Replacing a double rail and want one that won't sag? The Raymor Projix Double Towel Rail 930mm in Brushed Nickel is the biggest towel rail in the Projix range: two 930mm bars, one behind the other, with a 135mm projection so both towels get air. It takes two bath sheets or a family's worth of hand towels. The body is zinc alloy with a brushed nickel finish, mounted on brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• Two 930mm bars, which doubles the hanging space of a single rail
• 135mm projection that leaves a gap between the towels so they actually dry
• Zinc alloy body in a brushed nickel finish that suits Projix tapware and showers
• Brass four-point fixings that cope with wet towels being yanked off every day
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted on four fixings. Loaded with wet towels it's heavier than it looks, so anchor into studs or use proper plugs, and ask your handyman if unsure.

Projix also does a 630mm double rail, single rails, robe hooks and a glass shelf in the same finishes.

Specifications

Construction material: Zinc
Overall length: 930 mm
Projection: 135 mm
Height: 62 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Doing a bathroom refresh and want the towel rail to match the taps? The Raymor Projix Double Towel Rail 630mm in Brushed Nickel gives you two bars side by side, so two towels hang flat and dry properly instead of bunching up on one. At 630mm wide it suits most bathrooms, and the 135mm projection keeps towels off the wall. The body is zinc alloy with a brushed nickel finish on brass four-point fixings, and it's rated for commercial use too. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• Two bars side by side, so a pair of towels dry properly instead of overlapping
• 630mm wide with a 135mm projection, which gives towels room to hang clear of the wall
• Zinc alloy body with a brushed nickel finish that stands up to steam and daily use
• Brass four-point fixings for a rail that stays put when you tug a towel off it, at home or in commercial jobs
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with four fixing points. Find studs or use the right anchors for plasterboard, and ask your plumber or handyman if you're not sure.

Match it with Projix single towel rails, robe hooks, roll holders and pin lever tapware in the same finish.

Specifications

Construction material: Zinc
Overall length: 630 mm
Projection: 135 mm
Height: 62 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Need a rail that fits between the vanity and the shower? The Raymor Projix Single Towel Rail 630mm in Black is a straight, no-nonsense rail for one bath towel, sized to suit most family bathrooms and ensuites. It projects 75mm from the wall, enough for a towel to hang and dry without rubbing the paint. The body is zinc alloy under a black finish, on brass four-point fixings so it doesn't wobble, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• 630mm long, which fits a standard bath towel folded in half
• 75mm projection, so towels hang clear of the wall and dry faster
• Zinc alloy body with a black finish that wipes clean and matches Projix tapware
• Brass four-point fixings that hold firm at home or in commercial bathrooms
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with four fixing points. Screw into studs where you can, or use the right plugs for plasterboard or tiles.

Projix also does a 930mm single rail, double rails, robe hooks and roll holders in the same three finishes.

Specifications

Construction material: Zinc
Overall length: 630 mm
Projection: 75 mm
Height: 44 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Want two bath sheets hanging side by side without overlapping? The Raymor Projix Double Towel Rail 930mm in Black is the biggest towel rail in the Projix range: two 930mm bars, one behind the other, with a 135mm projection so both towels get air. It takes two bath sheets or a family's worth of hand towels. The body is zinc alloy with a black finish, mounted on brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• Two 930mm bars, which doubles the hanging space of a single rail
• 135mm projection that leaves a gap between the towels so they actually dry
• Zinc alloy body in a black finish that suits Projix tapware and showers
• Brass four-point fixings that cope with wet towels being yanked off every day
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted on four fixings. Loaded with wet towels it's heavier than it looks, so anchor into studs or use proper plugs, and ask your handyman if unsure.

Projix also does a 630mm double rail, single rails, robe hooks and a glass shelf in the same finishes.

Specifications

Construction material: Zinc
Overall length: 930 mm
Projection: 135 mm
Height: 62 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Got a long empty wall next to the bath going to waste? The Raymor Projix Single Towel Rail 930mm in Black is the long version, with a 930mm bar that takes a bath sheet or two hand towels side by side. Like the rest of the Projix accessories it's zinc alloy with a black finish, sits 75mm off the wall and mounts on brass four-point fixings, so it's up to commercial bathrooms as well as home ones. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• 930mm bar, so a bath sheet hangs flat instead of doubled over
• Zinc alloy construction that won't warp in a steamy room
• Black finish to match Projix pin lever taps, showers and accessories
• Brass four-point fixings for a rail that stays tight on the wall, rated for commercial use
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Four wall fixings, 75mm projection. Over a longer span it pays to hit at least one stud, so check before you drill or ask your handyman.

Match it with the Projix 630mm single rail, double rails, glass shelf and roll holder.

Specifications

Construction material: Zinc
Overall length: 930 mm
Projection: 75 mm
Height: 44 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Big bathroom, big towels, nowhere to hang them? The Raymor Boston II Double Towel Rail 850mm in Black is the longer of the two Boston II double rails, with twin round bars across 850mm of wall. That's room for two bath sheets hung flat, or towels and a bath mat. The bars sit 118mm out from the wall, so air gets around both. It's brass all the way through with a black finish, and installation instructions come with the rail. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• 850mm long, so two bath sheets hang flat without overlapping
• Twin bars for double the hanging space on one set of fixings
• Brass throughout in a black finish, made to shrug off a steamy bathroom
• 118mm projection that lets air move around both towels
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long wants solid fixing, so find the studs or use good anchors in tiles.

If 850mm is too wide, the Boston II double rail also comes at 650mm, with matching single rails and hooks.

Specifications

Construction material: Brass
Overall length: 850 mm
Projection: 118 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Hand towel living on the edge of the basin? The Raymor Boston II Hand Towel Rail in Black is a short single rail sized for a hand towel, for beside the vanity or in a powder room. At 239mm wide it fits the narrow wall between a basin and a door, and the 91.5mm projection lets the towel hang clear. It's solid brass with a black finish and a rounded bar to suit curved tapware. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome.

• 239mm rail sized for a hand towel, so it fits beside a basin where a full rail won't
• Solid brass construction that keeps its shape and won't rust
• Round bar with a black finish that matches Boston II tapware
• 91.5mm projection, which keeps a folded hand towel off the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Check for pipes behind the wall near the basin before drilling, or leave it to your plumber.

Pair it with a Boston II robe hook, roll holder and basin mixer in the same finish.

Specifications

Construction material: Brass
Overall length: 239 mm
Projection: 91.5 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel rail
• Installation Instructions

Bath towels piling up on the door handle? The Raymor Boston II Robe Hook in Black gives a towel or dressing gown its own spot on the wall, and a row at different heights sorts out a family bathroom. It's a single brass hook with a rounded profile and a black finish, 52mm wide, 60.5mm high and standing 71.5mm off the wall so a thick towel hangs without sliding off. Installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• One hook per towel or robe, handy behind the door or next to the shower screen
• Brass build with a rounded profile, which won't snag towels or rust
• Black finish that ties in with Boston II tapware and other curved ranges
• 71.5mm projection, so a heavy bath towel stays on the hook
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed. A wall plug in tiles or plasterboard is all it needs, but check for pipes first.

Boston II also does towel rails, roll holders and hand towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 52 mm
Projection: 71.5 mm
Height: 60.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Installation Instructions

Sharing one towel rail and losing the argument? The Raymor Boston II Double Towel Rail 650mm in Black has two round bars side by side, so a couple of bath towels hang flat and air out properly. At 650mm wide it suits an ensuite or a smaller bathroom, and the 118mm projection keeps the front towel clear of the back one. It's solid brass in a black finish, with installation instructions in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel, and in an 850mm length.

• Two bars side by side, which gives each towel its own space to dry
• 650mm long, a good fit for an ensuite or the wall between the vanity and shower
• Solid brass rail in a black finish that handles steam day in, day out
• 118mm projection, so the front towel doesn't press against the one behind it
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs where you can, or use the right anchors for tile and plasterboard, and ask your handyman if unsure.

Match it with Boston II single rails, robe hooks and roll holders, or go for the 850mm double rail on a wider wall.

Specifications

Construction material: Brass
Overall length: 650 mm
Projection: 118 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Roll holder wobbling every time you reach for it? The Raymor Boston II Toilet Roll Holder in Black is a single arm holder with a rounded rail, made to sit alongside curved tapware. It's solid brass under a black finish, so it won't flex or rust in a damp toilet. At 159.5mm wide and 91.5mm deep it takes a standard roll, and swapping it is a one-handed job. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• Open arm design, so changing the roll takes one hand and no fiddling
• Solid brass body that stays rigid and won't corrode in a small, damp room
• Black finish with a rounded rail that suits Boston II and other curved tapware
• 159.5mm wide with a 91.5mm projection, which fits a full roll without crowding the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it within easy reach of the toilet and check for pipes and cables before drilling.

Match it with Boston II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 159.5 mm
Projection: 91.5 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Powder room with no room for a proper rail? The Raymor Edge II Hand Towel Rail in Chrome is a short, single square bar built for a hand towel beside the basin or in a powder room. At 239mm wide it slots in next to a vanity where a full rail won't fit, and it stands 72.5mm off the wall so the towel hangs freely. It's solid brass with a chrome finish, instructions in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black.

• 239mm bar sized for a hand towel, which fits beside a basin where a bath towel rail won't
• Solid brass construction that keeps its shape and shrugs off splashes
• Square bar in a chrome finish to match Edge II tapware
• 72.5mm projection, so a folded hand towel hangs clear of the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Check for pipes behind the wall next to the basin before drilling, or ask your plumber.

Team it with an Edge II robe hook, roll holder and basin mixer in the same finish.

Specifications

Construction material: Brass
Overall length: 239 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel rail
• Installation Instructions

Vanity top disappearing under bottles? The Raymor Edge II Shelf 426mm in Chrome is a slim, squared shelf for the shower, above the basin or beside the bath. It's brass with a chrome finish, so it holds up in a wet area and wipes clean. At 426mm wide and 120mm deep there's room for a couple of bottles and a bar of soap, and at 24mm high it doesn't crowd the wall. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• 426mm wide and 120mm deep, which takes a row of shampoo bottles
• Brass build that won't rust in the shower
• Slim 24mm profile, so it looks neat under a mirror or in a niche
• Chrome finish that matches Edge II rails, hooks and tapware
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Anchor into studs or use proper tile plugs, and keep the load sensible. Ask your handyman or plumber if you're not sure.

Pair it with Edge II towel rails, the roll holder with shelf and square tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 426 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Need a longer rail for a big bath sheet? The Raymor Edge II Single Towel Rail 785mm in Black is the longer rail in the range, wide enough for a bath sheet or two hand towels side by side on one bar. The squared profile suits square tapware and modern vanities. Brass all the way through, with a black finish that stands up to steam, it's 785mm wide, 24mm high and sits 71.5mm off the wall. Installation instructions are included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• 785mm wide, so a bath sheet or two hand towels hang flat on one bar
• Brass construction that won't bow or corrode in a steamy bathroom
• Low 24mm profile with a 71.5mm projection, keeping it neat but clear of the wall
• Black finish to tie in with Edge II mixers and accessories
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall. Long rails need both ends anchored properly, so find studs or use tile-rated plugs, or get your plumber or handyman to fit it.

Team it with the 635mm Edge II rail, robe hooks, roll holders and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Nowhere to put the shampoo except the floor of the shower? The Raymor Edge II Shelf 426mm in Black is a slim, squared shelf for the shower, above the basin or beside the bath. It's brass with a black finish, so it holds up in a wet area and wipes clean. At 426mm wide and 120mm deep there's room for a couple of bottles and a bar of soap, and at 24mm high it doesn't crowd the wall. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• 426mm wide and 120mm deep, which takes a row of shampoo bottles
• Brass build that won't rust in the shower
• Slim 24mm profile, so it looks neat under a mirror or in a niche
• Black finish that matches Edge II rails, hooks and tapware
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Anchor into studs or use proper tile plugs, and keep the load sensible. Ask your handyman or plumber if you're not sure.

Pair it with Edge II towel rails, the roll holder with shelf and square tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 426 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Hand towel draped over the tap again? The Raymor Edge II Hand Towel Rail in Black is a short, single square bar built for a hand towel beside the basin or in a powder room. At 239mm wide it slots in next to a vanity where a full rail won't fit, and it stands 72.5mm off the wall so the towel hangs freely. It's solid brass with a black finish, instructions in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome.

• 239mm bar sized for a hand towel, which fits beside a basin where a bath towel rail won't
• Solid brass construction that keeps its shape and shrugs off splashes
• Square bar in a black finish to match Edge II tapware
• 72.5mm projection, so a folded hand towel hangs clear of the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Check for pipes behind the wall next to the basin before drilling, or ask your plumber.

Team it with an Edge II robe hook, roll holder and basin mixer in the same finish.

Specifications

Construction material: Brass
Overall length: 239 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel rail
• Installation Instructions

Towel rail wobbling every time you grab a towel? The Raymor Edge II Single Towel Rail 635mm in Black is a straight, square-profile rail that takes one bath towel with room to spare. It's solid brass with a black finish, so it won't sag or rust over the years. At 635mm wide, 24mm high and 71.5mm deep it sits close to the wall and clears a swinging door in most bathrooms. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• Solid brass rail, so it stays straight under a wet bath towel
• 635mm wide, which fits a full size bath towel folded once
• 71.5mm projection that keeps the towel off the wall to dry
• Black finish that wipes clean and matches Edge II tapware
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use the right anchors for tile and plasterboard, and check for pipes before drilling.

Edge II also does a 785mm rail, shelves, roll holders and square tapware in the same three finishes.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Replacing a rail in a compact bathroom without giving up a second towel? The Raymor Boston II Double Towel Rail 650mm in Brushed Nickel has two round bars side by side, so a couple of bath towels hang flat and air out properly. At 650mm wide it suits an ensuite or a smaller bathroom, and the 118mm projection keeps the front towel clear of the back one. It's solid brass in a brushed nickel finish, with installation instructions in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome, and in an 850mm length.

• Two bars side by side, which gives each towel its own space to dry
• 650mm long, a good fit for an ensuite or the wall between the vanity and shower
• Solid brass rail in a brushed nickel finish that handles steam day in, day out
• 118mm projection, so the front towel doesn't press against the one behind it
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs where you can, or use the right anchors for tile and plasterboard, and ask your handyman if unsure.

Match it with Boston II single rails, robe hooks and roll holders, or go for the 850mm double rail on a wider wall.

Specifications

Construction material: Brass
Overall length: 650 mm
Projection: 118 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Round tapware and a square towel rail? Time to fix the mismatch. The Raymor Boston II Hand Towel Holder in Brushed Nickel is a compact round rail for a hand towel beside the basin. The curved profile suits Boston II and other rounded tapware. It's brass with a brushed nickel finish, so it won't corrode or lose its colour with daily use. It measures 239mm wide and 52mm high, and stands 91.5mm off the wall so the towel dries properly. A fixing kit and installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• Compact 239mm rail for a hand towel, which fits beside a basin or in a powder room
• Round profile that matches Boston II and other curved tapware
• Brass construction under a brushed nickel finish that stands up to wet hands
• 91.5mm projection, so the towel hangs free of the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted, fixing kit supplied. Use tile plugs on tiles and mind any pipes behind the wall near the basin.

Boston II also does towel rails, robe hooks, the glass shelf and round tapware to finish the room.

Specifications

Construction material: Brass
Overall length: 239 mm
Projection: 91.5 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel holder
• Fixing Kit
• Installation Instructions

After a wider towel rail that matches round tapware? The Raymor Boston II Double Towel Rail 850mm in Brushed Nickel is the longer of the two Boston II double rails, with twin round bars across 850mm of wall. That's room for two bath sheets hung flat, or towels and a bath mat. The bars sit 118mm out from the wall, so air gets around both. It's brass all the way through with a brushed nickel finish, and installation instructions come with the rail. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• 850mm long, so two bath sheets hang flat without overlapping
• Twin bars for double the hanging space on one set of fixings
• Brass throughout in a brushed nickel finish, made to shrug off a steamy bathroom
• 118mm projection that lets air move around both towels
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long wants solid fixing, so find the studs or use good anchors in tiles.

If 850mm is too wide, the Boston II double rail also comes at 650mm, with matching single rails and hooks.

Specifications

Construction material: Brass
Overall length: 850 mm
Projection: 118 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Want one rail wide enough for the whole family's towels? The Raymor Boston II Towel Rail Single 850mm in Brushed Nickel runs 850mm along the wall, wide enough for a bath sheet hung flat or three hand towels in a row. It's a single round bar in solid brass with a brushed nickel finish, sitting 72mm from the wall so it stays out of the way in a walkway. Installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome, or at 650mm for a shorter wall.

• 850mm bar that takes a full bath sheet without folding it in half
• Solid brass build, so the long span stays straight under load
• Round profile in a brushed nickel finish to match Boston II mixers and spouts
• 72mm projection that keeps the rail tight to the wall in a corridor or beside the bath
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with fixings at each end. On a span this long, aim for studs or use quality anchors in tile.

Boston II also does double rails, hand towel rails, robe hooks and roll holders in the same finish.

Specifications

Construction material: Brass
Overall length: 850 mm
Projection: 72 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Refreshing the bathroom and want the rail to match round taps? The Raymor Boston II Towel Rail Single 650mm in Brushed Nickel is a straightforward single bar for one bath towel, or two hand towels side by side. The 650mm length suits an ensuite or the gap between shower screen and vanity, and it stands 72mm off the wall so the towel dries rather than sweats. It's solid brass under a brushed nickel finish. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome, and in an 850mm length.

• 650mm single bar, the right size for one bath towel or two hand towels
• Solid brass rail that won't bow under a heavy wet towel
• Brushed nickel finish on a round bar that sits well with curved tapware
• 72mm projection, so the rail hugs the wall in a tight space
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use tile anchors, and check for pipes before you drill.

Need more hanging space? Look at the Boston II double rails, or add a robe hook or two in the same finish.

Specifications

Construction material: Brass
Overall length: 650 mm
Projection: 72 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Towel rail sagging or the plating peeling off? The Raymor Projix Double Towel Rail 630mm in Black gives you two bars side by side, so two towels hang flat and dry properly instead of bunching up on one. At 630mm wide it suits most bathrooms, and the 135mm projection keeps towels off the wall. The body is zinc alloy with a black finish on brass four-point fixings, and it's rated for commercial use too. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• Two bars side by side, so a pair of towels dry properly instead of overlapping
• 630mm wide with a 135mm projection, which gives towels room to hang clear of the wall
• Zinc alloy body with a black finish that stands up to steam and daily use
• Brass four-point fixings for a rail that stays put when you tug a towel off it, at home or in commercial jobs
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with four fixing points. Find studs or use the right anchors for plasterboard, and ask your plumber or handyman if you're not sure.

Match it with Projix single towel rails, robe hooks, roll holders and pin lever tapware in the same finish.

Specifications

Construction material: Zinc
Overall length: 630 mm
Projection: 135 mm
Height: 62 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Want a shelf that goes with round tapware rather than fighting it? The Raymor Boston II Glass Shelf 530mm in Brushed Nickel gives you a proper spot for soap, moisturiser and a toothbrush cup above the basin or beside the bath. A glass shelf sits in a round brass rail, so it wipes clean and won't discolour. It's 530mm wide, 98mm high and 133mm deep, enough for a row of bottles. The rounded rail suits Boston II and other curved tapware. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Chrome.

• Glass shelf on a brass rail, so bottles sit flat and the surface wipes clean
• 530mm wide and 133mm deep, which fits a row of full size bottles
• Round rail with a brushed nickel finish that matches Boston II and other curved tapware
• Brass construction that holds its shape in a steamy bathroom
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use proper anchors in tiles, and go easy on the weight. Ask your handyman or plumber if unsure.

Boston II also does towel rails, robe hooks, roll holders and tapware in the same three finishes.

Specifications

Construction material: Glass, Brass
Overall length: 530 mm
Projection: 133 mm
Height: 98 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Want a shelf that lines up with square tapware? The Raymor Edge II Shelf 426mm in Brushed Nickel is a slim, squared shelf for the shower, above the basin or beside the bath. It's brass with a brushed nickel finish, so it holds up in a wet area and wipes clean. At 426mm wide and 120mm deep there's room for a couple of bottles and a bar of soap, and at 24mm high it doesn't crowd the wall. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Chrome.

• 426mm wide and 120mm deep, which takes a row of shampoo bottles
• Brass build that won't rust in the shower
• Slim 24mm profile, so it looks neat under a mirror or in a niche
• Brushed nickel finish that matches Edge II rails, hooks and tapware
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Anchor into studs or use proper tile plugs, and keep the load sensible. Ask your handyman or plumber if you're not sure.

Pair it with Edge II towel rails, the roll holder with shelf and square tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 426 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Refreshing the bathroom without touching the tiles? The Raymor Edge II Single Towel Rail 785mm in Brushed Nickel is the longer rail in the range, wide enough for a bath sheet or two hand towels side by side on one bar. The squared profile suits square tapware and modern vanities. Brass all the way through, with a brushed nickel finish that stands up to steam, it's 785mm wide, 24mm high and sits 71.5mm off the wall. Installation instructions are included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Chrome.

• 785mm wide, so a bath sheet or two hand towels hang flat on one bar
• Brass construction that won't bow or corrode in a steamy bathroom
• Low 24mm profile with a 71.5mm projection, keeping it neat but clear of the wall
• Brushed nickel finish to tie in with Edge II mixers and accessories
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall. Long rails need both ends anchored properly, so find studs or use tile-rated plugs, or get your plumber or handyman to fit it.

Team it with the 635mm Edge II rail, robe hooks, roll holders and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Rounding off a Boston II bathroom with the small bits? The Raymor Boston II Robe Hook in Brushed Nickel gives a towel or dressing gown its own spot on the wall, and a row at different heights sorts out a family bathroom. It's a single brass hook with a rounded profile and a brushed nickel finish, 52mm wide, 60.5mm high and standing 71.5mm off the wall so a thick towel hangs without sliding off. Installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• One hook per towel or robe, handy behind the door or next to the shower screen
• Brass build with a rounded profile, which won't snag towels or rust
• Brushed nickel finish that ties in with Boston II tapware and other curved ranges
• 71.5mm projection, so a heavy bath towel stays on the hook
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed. A wall plug in tiles or plasterboard is all it needs, but check for pipes first.

Boston II also does towel rails, roll holders and hand towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 52 mm
Projection: 71.5 mm
Height: 60.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Fixing Kit
• Installation Instructions

Fitting out a new toilet and after something simple that lasts? The Raymor Boston II Toilet Roll Holder in Brushed Nickel is a single arm holder with a rounded rail, made to sit alongside curved tapware. It's solid brass under a brushed nickel finish, so it won't flex or rust in a damp toilet. At 159.5mm wide and 91.5mm deep it takes a standard roll, and swapping it is a one-handed job. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• Open arm design, so changing the roll takes one hand and no fiddling
• Solid brass body that stays rigid and won't corrode in a small, damp room
• Brushed nickel finish with a rounded rail that suits Boston II and other curved tapware
• 159.5mm wide with a 91.5mm projection, which fits a full roll without crowding the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it within easy reach of the toilet and check for pipes and cables before drilling.

Match it with Boston II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 159.5 mm
Projection: 91.5 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions

Bath sheets that need more than a short rail? The Raymor Edge II Double Towel Rail 785mm in Black is the longer Edge II double rail, with twin square bars stretching 785mm along the wall. Hang two bath sheets flat, or towels behind and a bath mat in front. Both bars sit 120mm from the wall so nothing sits damp against the tiles. It's solid brass throughout with a black finish, instructions included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• 785mm long, so two bath sheets hang flat without overlapping
• Twin square bars on one set of fixings, for double the towel space
• Solid brass build with a black finish that handles a steamy main bathroom
• 120mm projection that keeps both towels clear of the wall and each other
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long needs solid fixing at both ends, so find the studs or use good tile anchors.

Wall too short? The Edge II double rail also comes at 635mm, with single rails, hooks and roll holders to match.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Nowhere to hang a towel by the shower? The Raymor Edge II Robe Hook in Black is a slim single hook with a square profile, made to hang a towel or robe next to the shower or behind the door. It's small, 53mm high and just 33mm off the wall, so it tucks in where a bigger hook would get in the way. Solid brass in a black finish. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• Slim square hook, so it fits on a narrow strip of wall or tile
• Solid brass that won't bend under a wet bath towel
• Black finish that matches Edge II tapware and rails
• 33mm projection, which keeps it low profile in a tight space
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed. Use a wall plug in plasterboard or tiles and check for pipes before drilling.

Grab two or three, then match them with Edge II towel rails, roll holders and a soap dish in the same finish.

Specifications

Construction material: Brass
Overall length: 16 mm
Projection: 33 mm
Height: 53 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Robe hook
• Installation Instructions

Two towels squashed onto one bar? The Raymor Edge II Double Towel Rail 635mm in Black puts two square bars side by side on one bracket, so a pair of bath towels dry flat instead of overlapping. The 635mm width suits an ensuite or a smaller bathroom, and the 120mm projection leaves room between the bars for air to move. It's solid brass under a black finish, with installation instructions supplied. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel, and in a 785mm length.

• Two bars side by side, which doubles your hanging space on one wall
• 635mm wide, a sensible fit for an ensuite or a compact bathroom
• Solid brass with a black finish that won't tarnish in steam
• 120mm projection, so both towels get airflow and dry properly
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use decent anchors in tile, and ask your handyman or plumber if you're not sure.

Match it with Edge II single rails, robe hooks and roll holders, or step up to the 785mm double rail for a longer wall.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Shower soap dish cracked or gone grubby? The Raymor Edge II Metal Soap Dish in Black is a solid brass dish with a powder coated matte black finish, built to hold a bar of soap beside the basin or in the shower. It's the square Edge II shape, 206mm wide, 24mm high and 120mm deep, so a full bar sits in it with room to drain. Being metal, not plastic, it won't crack or discolour. Installation instructions are in the box. Backed by a 10 year warranty on the body and fittings, 5 years on the finish, 1 year on seals and labour.

• Solid brass dish, so it won't crack or yellow like a plastic one
• Powder coated matte black finish that suits black tapware and shower fittings
• 206mm wide with a 120mm projection, room enough for a big bar of soap
• Squared Edge II shape that lines up with the rest of the range
• 10 year warranty on the body and fittings, 5 years on the finish, 1 year on seals and labour

Wall mounted. Seal the fixing holes if it's going in the shower, and check for pipes before drilling.

Match it with Edge II towel rails, robe hooks and roll holders in Black.

Specifications

Construction material: Brass
Overall length: 206 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Metal soap dish
• Installation Instructions

Roll holder that's more wobble than holder? The Raymor Edge II Toilet Roll Holder in Black is a single arm holder with a square profile, made for bathrooms with Edge II or other angular tapware. It's solid brass in a black finish, so nothing snaps or rusts. It's 174mm wide and sits 72.5mm out from the wall, taking a standard roll you can swap with one hand. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• Single arm, so changing the roll is a one-handed job
• Solid brass body that stays firm and won't corrode in a damp toilet
• Square profile with a black finish that lines up with Edge II tapware
• 174mm wide and 72.5mm off the wall, which keeps it neat in a narrow toilet
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it where you can reach it from the seat, and check for pipes before you drill.

Prefer somewhere to rest your phone? The Edge II Roll Holder with Shelf does that. Otherwise match this one with Edge II robe hooks and towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 174 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions