Oliveri

Need somewhere to drain dishes that disappears after? The Oliveri Cooking Mate Series Foldamate is a stainless steel drainer mat that rolls out across the sink bowl, 460 x 435mm and 10mm thick, so pots, plates and rinsed veg drain into the sink while the bench stays clear. Roll it up and it stores in a drawer. Check your bowl measures at least 435mm front to back. Covered by a 1 year warranty on replacement parts.

• Stainless steel drainer mat that lies across the bowl
• 460 x 435mm, which covers a large single bowl
• Rolls up to 10mm for storage when the sink is needed
• Water drains straight into the sink instead of pooling on the bench
• 1 year warranty on replacement parts

Measure the bowl before ordering so the mat spans the rim on both sides.

For a 480mm sink such as Diaz or Endeavour, see the Oliveri Foldamate for 480mm sinks.

Specifications

Construction material: Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 460 x 10 x 435 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

One large bowl under a stone bench is all many kitchens need. The Oliveri Endeavour Large Bowl Undermount Sink is a 546mm wide single bowl with square corners, so a roasting dish or a stockpot sits flat and gets a proper soak. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. Fixed under a stone or solid surface bench, with no tap hole because your mixer mounts through the bench behind. Suits a 700mm cabinet. In the box: the sink, a 90mm basket waste and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• 546mm single bowl that takes oven trays and stockpots lying flat
• Undermount fit for stone or solid surface benches, so you wipe straight into the bowl
• 18/10 polished 304 grade stainless steel at 0.9mm thick for durability
• No tap hole, which leaves mixer placement to you
• 90mm basket waste and adjustable clips supplied
• Made in Adelaide, South Australia, with a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 700mm cabinet and a stone or solid surface bench. Your stonemason cuts the opening and your plumber connects the waste.

The Oliveri Lakeland and Endeavour Main Bowl Bamboo Chopping Board sits across the bowl for prep.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 546 x 190 x 426 mm
Tap holes: n/a
Minimum cabinet size: 700mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Got the room for two full bowls and a drainer? The Oliveri Endeavour Double Bowl Topmount Sink with Left Hand Drainer runs 1135mm wide, with two square cornered bowls and an embossed drainer on the left. It's the layout for a busy kitchen where one bowl soaks while the other washes. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. It fits topmount into an 800mm cabinet and has one tap hole punched for a mixer. In the box: the sink, two 90mm basket wastes and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Two full bowls plus a left hand drainer across 1135mm for a large kitchen
• Embossed drainer that sheds water back into the bowl
• 18/10 polished 304 grade stainless steel at 0.9mm thick for a long working life
• One tap hole punched for a sink mixer
• Two 90mm basket wastes and adjustable clips supplied
• Australian made in Adelaide and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs an 800mm cabinet and a 1115 x 460mm cut-out with 15mm radius corners. Your plumber connects both wastes.

Team it with the Oliveri Lakeland and Endeavour Main Bowl Bamboo Chopping Board for prep over a bowl.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1135 x 164 x 480 mm
Tap holes: 1 tap hole (for no tap hole order product code أ¢â‚¬ثœEE70')
Cut out size: 1115 x 460 x 15mm radius
Minimum cabinet size: 800mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Room for a 700mm cabinet and plumbing on the right? The Oliveri Laundry 70L Tub with a right hand tap hole is built for exactly that, with a single tap hole punched on the right of the rim and a 70 litre bowl for the heavy soaking jobs. It's pressed in Adelaide, South Australia, from 304 grade stainless steel at 0.9mm thick, formed as one piece with soundproofing underneath. Topmount fit, so it drops into the bench and clips from below. In the box you get the tub, a 90mm basket waste, adjustable clips and a rinse bypass fitting. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• 70 litre capacity for soaking bedding, towels and work gear together
• Single tap hole on the right hand side, which suits right side hot and cold supply
• 0.9mm 304 grade stainless steel built to take years of hot water and detergent
• Pressed as one piece with soundproofing underneath to keep the drumming down
• Box contents list a rinse bypass for the washing machine drain hose
• Made in Adelaide, South Australia, with a lifetime manufacturer's warranty (see Oliveri's terms)

Allow a 700mm cabinet and a 610 x 530mm cut-out with 10mm radius corners. Your plumber makes the waste and bypass connections.

Tap on the left instead? Pick the Oliveri Laundry 70L Tub with a left hand tap hole.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 630 x 315 x 550 mm
Tap holes: Available 0 - 2 tap hole (specify positioning when ordering)
Cut out size: 610 mm x 530 mm (with R10 mm corners)
Minimum cabinet size: 700 mm
Overflow: And bypass options
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Nu-Petite main bowl sitting empty between washes? The Oliveri Nu-Petite Main Bowl Colander is cut to fit the main bowl of Oliveri Nu-Petite sinks, at 405 x 140 x 150mm, so it rests in place for rinsing greens or draining a big pot. It's food grade plastic in black, which won't scratch the stainless and lifts out with one hand. Covered by a 1 year warranty on replacement parts.

• Sized for the main bowl of Oliveri Nu-Petite sinks
• Food grade plastic in black that's gentle on the stainless bowl
• 405 x 140 x 150mm, deep enough for a pot of pasta
• Drains straight into the bowl, so no mess on the bench
• 1 year warranty on replacement parts

Check your sink is from the Nu-Petite range before ordering.

Pair it with the Oliveri Nu-Petite Main Bowl Drainer Basket and Bamboo Chopping Board.

Specifications

Construction material: Food Grade Plastic
Finish/coating: Black
Overall dimensions (W x D x H): 405 x 140 x 150 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Looking for a second sink for the butler's pantry or a bar? The Oliveri Diaz Standard Bowl Undermount Sink is a single square cornered bowl, 361mm wide, that fixes under a stone bench and fits a 500mm cabinet. It also works as the main sink in a studio or compact kitchen. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick, so it takes daily use without fuss. As an undermount there's no tap hole; the mixer goes through the bench. In the box: the sink, a basket waste, mounting clips and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Compact 361mm single bowl that suits a pantry, bar or small kitchen
• Undermount fit for stone or solid surface benches, so there's no rim to catch grime
• 18/10 polished 304 grade stainless steel at 0.9mm thick for durability
• No tap hole, which lets you place the mixer where it suits the bench
• Basket waste, mounting clips and sealing foam supplied
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 500mm cabinet and a stone or solid surface bench. Your stonemason cuts the opening and your plumber connects the waste.

Pair it with the Oliveri Diaz and Petite Main Bowl Bamboo Chopping Board to gain prep space over the bowl.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 361 x 182 x 431 mm
Tap holes: n/a
Minimum cabinet size: 500mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Prefer steel to plastic in the sink? The Oliveri Stainless Steel Deep Colander is a 425 x 120 x 165mm colander in stainless steel, deep enough for a pot of potatoes or a full rinse of salad greens. It sits in the bowl of some Oliveri sinks so you drain over the sink rather than the bench, and it cleans up with a rinse. Measure your bowl before ordering. Covered by a 1 year warranty on replacement parts.

• Stainless steel build that won't stain or hold odours like plastic can
• 120mm deep, so it holds a full pot of pasta or vegetables
• 425 x 165mm footprint that sits in the bowl of some Oliveri sinks
• Drains over the sink and rinses clean
• 1 year warranty on replacement parts

Check the 425mm length against the inside of your bowl before you buy.

The Oliveri Cooking Mate Series Dish Rack is the matching stainless basket for draining dishes.

Specifications

Construction material: Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 425 x 120 x 165 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Small kitchen, one good bowl? The Oliveri Diaz Single Bowl Topmount Sink with Right Hand Drainer fits a 500mm cabinet and still gives you a full square cornered bowl with a drainer on the right. At 770mm wide it suits apartments, granny flats and galley kitchens. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. Topmount fit with one tap hole punched for a mixer. In the box: a basket waste, mounting clips, a colander, a bamboo chopping board and sealing foam, so prep and draining are sorted straight away. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Single bowl with a right hand drainer in a 770mm footprint for compact kitchens
• Fits a 500mm cabinet, which keeps cupboard space for everything else
• 18/10 polished 304 grade stainless steel at 0.9mm thick for a long life
• One tap hole punched for a sink mixer
• Colander and bamboo chopping board included to double the bowl as a prep station
• Basket waste, mounting clips and sealing foam supplied
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Cut the bench at 750 x 460mm with 15mm radius corners. Your plumber connects the single waste.

Want the drainer on the other side? The Oliveri Diaz Single Bowl Sink with Left Hand Drainer is the match.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 192 x 480 mm
Tap holes: Available 0 or 1 tap hole (specify when ordering)
Cut out size: 750 x 460 x 15mm radius
Minimum cabinet size: 500mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Short on prep space next to an Apollo sink? The Oliveri Apollo Bamboo Chopping Board sits across the top of the Oliveri Apollo bowl, which turns the sink into a chopping station and lets you brush scraps straight into the bowl. It measures 425 x 20 x 210mm in solid bamboo. Lift it off when you're done and the sink is clear again. Covered by a 1 year warranty on replacement parts.

• Sized to sit on top of Oliveri Apollo sinks
• Solid bamboo at 20mm thick, which stays flat under a knife
• Scraps push straight into the bowl below while you chop
• 425 x 210mm surface, enough for a loaf or a head of lettuce
• 1 year warranty on replacement parts

Hand wash and dry it after use so the bamboo lasts.

Team it with the Oliveri Sonetto and Apollo Main Bowl Protector to keep the bowl beneath scratch free.

Specifications

Construction material: Bamboo
Finish/coating: Bamboo
Overall dimensions (W x D x H): 425 x 20 x 210 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Would you rather two full bowls than a drainer you never use? The Oliveri Diaz Double Bowl Topmount Sink gives you a pair of equal, square cornered bowls across 770mm and no drainer, leaving more bench either side. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. The sink sits topmount in the bench with one tap hole punched for a mixer. Oliveri includes two basket wastes, mounting clips, a colander, a bamboo chopping board, a utility tray and sealing foam, so you have prep accessories from day one. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Two equal bowls for washing and rinsing, or soaking and prep, at the same time
• 770mm wide with no drainer, so you keep more clear bench
• 18/10 polished 304 grade stainless steel at 0.9mm thick that stands up to pots and pans
• One tap hole punched for a sink mixer
• Colander, bamboo chopping board and utility tray included to work over the bowls
• Two basket wastes, mounting clips and sealing foam in the box
• Made in Adelaide, South Australia, with a lifetime manufacturer's warranty (see Oliveri's terms)

Needs an 800mm cabinet and a 750 x 460mm cut-out with 15mm radius corners. Your plumber connects both wastes.

With no drainer, the Oliveri Foldamate for 480mm sinks gives you a drying rack that rolls away after.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 192 x 480 mm
Tap holes: Available 0 or 1 tap hole (specify when ordering)
Cut out size: 750 x 460 x 15mm radius
Minimum cabinet size: 800mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Own a Diaz, Petite or Flinders sink? The Oliveri Diaz and Petite Main Bowl Colander in charcoal is sized for the main bowl of those three Oliveri ranges, at 345 x 110 x 150mm, so it sits in the bowl for rinsing and draining. It's food grade plastic, light to lift and easy to rinse clean. Handy as a spare if your sink came with one and it's always in use. Covered by a 1 year warranty on replacement parts.

• Fits the main bowl of Oliveri Diaz, Petite and Flinders sinks
• Food grade plastic in charcoal that's kind to the stainless bowl
• 345 x 110 x 150mm, which leaves room to work beside it
• Drains over the bowl, so the bench stays dry
• 1 year warranty on replacement parts

Confirm your range before ordering; other Oliveri sinks take different sizes.

The Oliveri Diaz and Petite Main Bowl Bamboo Chopping Board sits over the same bowl for prep.

Specifications

Construction material: Food Grade Plastic
Finish/coating: Black
Overall dimensions (W x D x H): 345 x 110 x 150 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Does your laundry plumbing come up on the left? The Oliveri Laundry 45L Tub with a left hand tap hole puts a single tap hole on the left side of the rim, ready for a mixer with the pipework already on that side. It's a 45 litre topmount tub made in Adelaide, South Australia, from 304 grade stainless steel at 0.9mm thick and pressed as one piece with soundproofing underneath. That means a tub that takes hot water, soaking and the odd dropped bucket without complaint. Supplied with a 90mm basket waste, adjustable clips and a rinse bypass fitting. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• One tap hole punched on the left hand side, so a mixer lines up with left side plumbing
• 45 litre bowl for soaking, hand washing and rinsing without the splash of a shallow tub
• 304 grade stainless steel at 0.9mm thick for a long working life
• Pressed as a single piece with soundproofing underneath to dull the noise of filling
• Box contents list a rinse bypass, which gives the washing machine hose its own inlet
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Fits a 600mm cabinet with a 570 x 450mm bench cut-out. Confirm your tap sits on the left before you order, and leave the connection to your plumber.

Plumbing on the other side? Choose the Oliveri Laundry 45L Tub with a right hand tap hole.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 590 x 244 x 470 mm
Tap holes: Available 0 - 2 tap hole (specify positioning when ordering)
Cut out size: 570 x 450 mm
Minimum cabinet size: 600 mm
Overflow: And bypass options
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Rinsing a handful of berries shouldn't need a full colander. The Oliveri 1/2 Bowl Colander is made for the half bowl of Oliveri sinks, at 300 x 110 x 215mm, so it rests in the small bowl and leaves the main bowl free. It's food grade plastic in black, light enough to lift out one handed and shake dry. Check it against your half bowl size as it suits some Oliveri sinks and not others. Covered by a 1 year warranty on replacement parts.

• Sized for the half bowl, which keeps the main bowl free for washing up
• Food grade plastic in black that's safe for rinsing fruit and veg
• 300 x 110 x 215mm and light enough to shake out one handed
• Fits some Oliveri sinks, so measure your half bowl first
• 1 year warranty on replacement parts

Measure the top of your half bowl against 300 x 215mm before ordering.

For the main bowl, see the Oliveri Diaz and Petite Main Bowl Colander or the Stainless Steel Deep Colander.

Specifications

Construction material: Food Grade Plastic
Finish/coating: Black
Overall dimensions (W x D x H): 300 x 110 x 215 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Cooking for a crowd and short on bench? The Oliveri Diaz 1 and 3/4 Bowl Topmount Sink with Right Hand Drainer gives you a full main bowl, a three quarter second bowl that's big enough for actual washing up, and a drainer on the right, across 1080mm. Square cornered bowls make the most of every millimetre. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick, fitted topmount with one tap hole punched. Oliveri packs in two basket wastes, mounting clips, a colander, a bamboo chopping board and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Main bowl and a three quarter bowl, so both sides take real washing up
• Right hand drainer with the bowls to the left as you stand at the sink
• 18/10 polished 304 grade stainless steel at 0.9mm thick that handles daily knocks
• One tap hole punched for a sink mixer
• Colander and bamboo chopping board in the box for prep over the bowls
• Two basket wastes, mounting clips and sealing foam supplied
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 700mm cabinet and a 1060 x 460mm cut-out with 15mm radius corners. Ask your plumber to connect both wastes.

Same layout, drainer on the other side? See the Oliveri Diaz 1 and 3/4 Bowl Sink with Left Hand Drainer.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1080 x 192 x 480 mm
Tap holes: Available 0 to 3 tap hole (specify when ordering)
Cut out size: 1060 x 460 x 15mm radius
Minimum cabinet size: 700mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Got a Monet sink and nowhere to drain the glasses? The Oliveri Monet Main Bowl Drainer Basket is sized for the main bowl of the Oliveri Monet range, at 400 x 120 x 335mm, so it drops in and sits level. It's chrome plated 304 stainless steel, and rubber feet come in the box to keep it from scratching the bowl. Use it in the bowl for rinsing and draining or set it on the drainer as a rack. Covered by a 1 year warranty on replacement parts.

• Made to fit the main bowl of Oliveri Monet sinks
• Chrome plated 304 stainless steel for a long life in a wet sink
• Works inside the bowl or on top of the drainer
• Rubber feet included so it won't mark the steel
• 1 year warranty on replacement parts

Check you have a Monet main bowl; other Oliveri ranges have their own basket sizes.

The Oliveri Monet Main Bowl Colander and Bamboo Chopping Board complete the set.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 400 x 120 x 335 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Haven't settled on a stone bench or a laminate one yet? The Oliveri Diaz Double Bowl Universal Sink can go either way: fit it topmount into a laminate bench or undermount beneath stone, since the same sink suits both. You get two square cornered bowls of the same size, handy for washing on one side and rinsing on the other. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. One tap hole is punched for a mixer. In the box: the sink, two 90mm basket wastes and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Universal design that installs topmount or undermount, so one sink suits either bench type
• Two matching bowls, which lets you wash and rinse side by side
• 18/10 polished 304 grade stainless steel at 0.9mm thick for a hard wearing finish
• One tap hole punched, ready for a sink mixer
• Two 90mm basket wastes and adjustable clips supplied
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs an 800mm cabinet. Undermounting suits a stone or solid surface bench; your stonemason cuts to suit and your plumber connects the wastes.

Add the Oliveri Diaz and Petite Main Bowl Colander or the matching bamboo chopping board to turn a bowl into prep space.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 775 x 189 x 500 mm
Tap holes: Available 1 tap hole only
Minimum cabinet size: 800mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want the washing machine to drain through the tub and a safety net if someone leaves the tap running? The Oliveri Laundry 45L Tub with Rinse Bypass and Overflow covers both. The bypass gives the machine's drain hose its own inlet, and the overflow sends excess water to the waste before it reaches the bench. It's a 45 litre topmount tub pressed in Adelaide, South Australia, from 0.9mm 304 grade stainless steel as a single piece with soundproofing underneath. Two tap holes are punched, ready for a standard hot and cold laundry set. In the box: the tub, a 90mm basket waste, adjustable clips, and the rinse bypass and overflow fittings. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Rinse bypass gives the washing machine drain hose a dedicated inlet, so no hose hooked over the rim
• Overflow outlet that drains a forgotten tap to the waste rather than across the floor
• 45 litre bowl in 0.9mm 304 grade stainless steel for everyday soaking and hand washing
• Two tap holes punched to suit a hot and cold laundry tap set
• Pressed as one piece with soundproofing underneath to keep filling quiet
• Made in Adelaide, South Australia, with a lifetime manufacturer's warranty (see Oliveri's terms)

Suits a 600mm cabinet with a 570 x 450mm bench cut-out. Your plumber connects the bypass and overflow to the waste along with the basket waste supplied.

Don't need the overflow? The Oliveri Laundry 45L Tub with Rinse Bypass is the same tub without it.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 590 x 244 x 470 mm
Tap holes: Available 0 - 2 tap hole (specify positioning when ordering)
Cut out size: 570 x 450 mm
Minimum cabinet size: 600 mm
Overflow: And bypass options
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a main bowl, a small rinsing bowl and a drainer, all in under a metre? The Oliveri Diaz 1 and 1/2 Bowl Topmount Sink with Right Hand Drainer packs that into 980mm, with the drainer on the right as you face the sink. The square cornered bowls give you more usable floor space than a rounded bowl of the same width. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. It drops into the bench topmount, and one tap hole is punched for a mixer. The box includes two basket wastes, mounting clips, a colander, a bamboo chopping board and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Main bowl plus half bowl, so you can rinse while the big bowl soaks a pan
• Right hand drainer that keeps dripping dishes off the bench
• 18/10 polished 304 grade stainless steel at 0.9mm thick for a sink that lasts
• One tap hole punched, ready for your mixer
• Colander and bamboo chopping board included, which turn the bowls into prep space
• Two basket wastes, mounting clips and sealing foam in the box
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Suits a 600mm cabinet with a 960 x 460mm cut-out and 15mm radius corners. Your plumber connects both wastes.

The Oliveri Foldamate for 480mm sinks rolls out over the bowl as an extra draining surface.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 980 x 192 x 480 mm
Tap holes: Available 0 or 1 tap hole (specify when ordering)
Cut out size: 960 x 460 x 15mm radius
Minimum cabinet size: 600mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing a laundry tub where the tap has always sat on the right? The Oliveri Laundry 45L Tub with a right hand tap hole keeps it there, with one hole punched on the right of the rim for a mixer or pillar tap. The 45 litre bowl suits a standard 600mm laundry cabinet and is deep enough for soaking and hand washing. It's made in Adelaide, South Australia, from 304 grade stainless steel at 0.9mm thick, pressed as a single piece with soundproofing underneath to keep filling quiet. Supplied as a topmount tub with a 90mm basket waste, adjustable clips and a rinse bypass fitting. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• One tap hole punched on the right hand side to match right side plumbing
• 45 litre bowl that fits a 600mm cabinet yet still takes a decent soak
• 304 grade stainless steel at 0.9mm thick, which stays looking clean with a wipe
• Single piece pressing with soundproofing underneath for less noise
• Box contents list a rinse bypass so the washing machine can drain into the tub
• Australian made in Adelaide and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Cut the bench at 570 x 450mm for a 600mm cabinet. Check the tap position against your existing pipework and ask your plumber if unsure.

Need it the other way round? The Oliveri Laundry 45L Tub with a left hand tap hole is the mirror of this one.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 590 x 244 x 470 mm
Tap holes: Available 0 - 2 tap hole (specify positioning when ordering)
Cut out size: 570 x 450 mm
Minimum cabinet size: 600 mm
Overflow: And bypass options
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Draining pasta over a Monet sink? The Oliveri Monet Main Bowl Colander sits in the main bowl of Oliveri Monet sinks, measuring 365 x 110 x 150mm, so you can tip, rinse and leave it to drip without a colander in the way on the bench. It's food grade plastic in black, which is light, quiet and easy to clean. Lift it out and it stacks in a cupboard. Covered by a 1 year warranty on replacement parts.

• Made for the main bowl of Oliveri Monet sinks
• Food grade plastic in black, light to handle and dishwasher friendly to clean
• 365 x 110 x 150mm, which leaves working room in the bowl
• Rinses and drains over the sink, keeping the bench dry
• 1 year warranty on replacement parts

Suits Monet main bowls; measure if you have another range.

Add the Oliveri Monet Main Bowl Drainer Basket and Bamboo Chopping Board for the full prep kit.

Specifications

Construction material: Food Grade Plastic
Finish/coating: Black
Overall dimensions (W x D x H): 365 x 110 x 150 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a tub that swallows a full load of soaking and lets the washing machine drain through it too? The Oliveri Laundry 70L Tub with Rinse Bypass does both. The 70 litre bowl is the larger of Oliveri's two tub sizes, and the rinse bypass gives the machine hose its own inlet so it's never in the way. Made in Adelaide, South Australia, from 304 grade stainless steel at 0.9mm thick, pressed as one piece with soundproofing underneath. It's a topmount tub with two tap holes punched for a hot and cold set. In the box you get the tub, a 90mm basket waste, adjustable clips and the rinse bypass fitting. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• 70 litre bowl with room for sheets, work clothes and a bucket at the same time
• Rinse bypass inlet for the washing machine drain hose, keeping the bowl clear
• 0.9mm 304 grade stainless steel that handles hot water and harsh laundry products
• Two tap holes punched to take a standard laundry tap set
• Single piece pressing with soundproofing underneath for quieter filling
• Australian made in Adelaide and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Allow a 700mm cabinet and a 610 x 530mm cut-out with 10mm radius corners. Your plumber connects the bypass and basket waste.

The smaller Oliveri Laundry 45L Tub with Rinse Bypass suits a 600mm cabinet if space is tight.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 630 x 315 x 550 mm
Tap holes: Available 0 - 2 tap hole (specify positioning when
Cut out size: 610 mm x 530 mm (with R10 mm corners)
Minimum cabinet size: 700 mm
Overflow: And bypass options
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Tired of the washing machine hose hooked over the edge of the tub? The Oliveri Laundry 45L Tub with Rinse Bypass fixes that with a second inlet built in for the machine's drain hose, so the bowl stays free for soaking. It's a 45 litre topmount tub made in Adelaide, South Australia, from 304 grade stainless steel at 0.9mm thick, pressed as a single piece with soundproofing underneath. Two tap holes come punched for a hot and cold laundry set. The pack includes the tub, a 90mm basket waste, adjustable clips and the rinse bypass fitting. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Built in rinse bypass, so the washing machine drains without the hose sitting in the bowl
• 45 litre bowl that handles hand washing, soaking and rinsing out paint brushes
• 304 grade stainless steel at 0.9mm thick for a tub that outlasts the machine next to it
• Two tap holes punched for a standard pillar tap set
• One piece pressing with soundproofing underneath, which cuts the drumming when filling
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 600mm cabinet and a 570 x 450mm cut-out. Ask your plumber to connect the bypass to the waste so the machine drains correctly.

Prefer an overflow as well? The Oliveri Laundry 45L Tub with Rinse Bypass and Overflow adds one.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 590 x 244 x 470 mm
Tap holes: Available 0 - 2 tap hole (specify positioning when ordering)
Cut out size: 570 x 450 mm
Minimum cabinet size: 600 mm
Overflow: And bypass options
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Washing up for one and no room for a dish rack? The Oliveri Cooking Mate Series Dish Rack is a chrome plated 304 stainless steel drainer basket that sits inside the sink bowl or on the drainer, so glasses and plates dry over the sink instead of the bench. At 360 x 130 x 295mm it suits a standard single bowl, and the rubber feet in the box stop it marking the steel. Lift it out and it stores in a cupboard. Covered by a 1 year warranty on replacement parts.

• Chrome plated 304 stainless steel that won't rust in a wet sink
• Sits inside the bowl, or up on the drainer, whichever suits the job
• Rubber feet supplied to protect the sink surface
• 360 x 130 x 295mm, which suits most standard bowls
• 1 year warranty on replacement parts

Measure your bowl before ordering to be sure the 360mm length clears the walls.

Pairs with the Oliveri Stainless Steel Deep Colander for rinsing veg in the same bowl.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 360 x 130 x 295 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fitting out a laundry with a 600mm cupboard to spare? The Oliveri Laundry 45L Tub is a topmount stainless tub that holds 45 litres, enough to soak a doona cover or hand wash a load of woollens without water slopping over the bench. It's pressed in Adelaide, South Australia, from 304 grade stainless steel at 0.9mm thick, formed as a single piece with soundproofing underneath to take the clang out of filling it. This is the no tap hole version, so your tap sits on the wall or in the bench behind. In the box you get the tub, a 90mm basket waste, adjustable clips and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• 45 litre single bowl that takes bulky washing and a long soak without crowding the bench
• 304 grade stainless steel at 0.9mm thick, so it stands up to hot water, detergents and years of use
• Pressed as one piece with soundproofing applied underneath to cut noise while filling
• No tap hole punched, which leaves you free to run a wall tap or a bench mounted mixer behind it
• 90mm basket waste, adjustable clips and sealing foam in the box for a tidy topmount fit
• Made in Adelaide, South Australia, with a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 600mm cabinet and a 570 x 450mm cut-out in the bench. This version comes without a bypass, so ask your plumber where the washing machine hose will drain.

If you want the machine to drain into the tub, look at the Oliveri Laundry 45L Tub with Rinse Bypass instead.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 590 x 244 x 470 mm
Tap holes: Available 0 - 2 tap hole (specify positioning when ordering)
Cut out size: 570 x 450 mm
Minimum cabinet size: 600 mm
Overflow: And bypass options
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Main bowl taking a beating? The Oliveri Spectra Main Bowl Protector in Gunmetal sits in the base of your Spectra main bowl and stops pots and cutlery marking the sink. Coloured stainless steel copes with hot water and heavy use, and the gunmetal finish suits a dark sink or black tapware. It also works as a raised rack for draining or defrosting, so food stays out of the wash water. Lift it out to rinse or run it through the dishwasher. 1 year warranty.

• Made for the Spectra main bowl, so it sits flat in the base
• Coloured stainless steel that handles heavy pans
• Gunmetal finish to match dark sinks and mixers
• Raised surface for draining or defrosting
• Dishwasher safe and easy to lift out
• 1 year warranty

Confirm your sink takes the Spectra main bowl size on the sink product page before ordering.

Add the Spectra large bowl protector in Gunmetal if you have the bigger bowl.

Specifications

Construction material: Coloured Stainless Steel
Suits: Oliveri Spectra main bowl
Warranty: 1 year

What's In The Box

• 1 x Bowl Protector

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Straining pasta over a sink with no colander that fits? The Oliveri 3/4 Bowl Colander in Charcoal sits on the rim of an Oliveri 3/4 bowl and gives you a proper strainer that stays put while you pour. It's food grade plastic in a charcoal finish that suits stainless or dark sinks, and it works just as well for rinsing vegetables or thawing under the tap. When you're done it lifts out and goes in the dishwasher. 1 year warranty.

• Sits on the rim of an Oliveri 3/4 bowl, so it doesn't tip when you pour
• Food grade plastic in a charcoal finish
• Good for straining pasta, rinsing vegetables or thawing under the tap
• Lifts out and is dishwasher safe
• Frees up bench space by working over the sink
• 1 year warranty

Check your sink model page to confirm it has a 3/4 bowl before you order.

See the Oliveri half bowl and main bowl colanders for other Oliveri sinks.

Specifications

Construction material: Food grade plastic
Finish/coating: Charcoal
Suits: Oliveri 3/4 bowl sinks
Warranty: 1 year

What's In The Box

• 1 x Colander 3/4 Bowl Charcoal

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want the sink base to look new for longer? The Oliveri Spectra Large Bowl Protector in Stainless Steel covers the base of a Spectra large bowl at 490mm x 395mm x 25mm, so heavy pots and trays land on the protector instead of the sink. It's plain stainless steel, so it matches the bowl and won't date. The raised grid doubles as a draining and defrosting rack that keeps food out of the water. Lift it out to clean or put it in the dishwasher. 1 year warranty.

• 490mm x 395mm x 25mm to suit the Spectra large bowl
• Stainless steel that matches the sink and takes daily punishment
• Raised surface for draining pots or defrosting food
• Lifts straight out and is dishwasher safe
• Keeps the sink base free of scratches from cookware
• 1 year warranty

Check your sink is the large Spectra bowl on its product page before you order.

Grab the Spectra main and half bowl protectors in Stainless Steel for a double bowl sink.

Specifications

Construction material: Stainless Steel
Overall length: 490mm
Overall width: 395mm
Overall height: 25mm
Suits: Oliveri Spectra large bowl
Warranty: 1 year

What's In The Box

• 1 x Bowl Protector

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Small bowl getting the same rough treatment as the big one? The Oliveri Spectra Half Bowl Protector in Stainless Steel drops into the half bowl of a Spectra double sink and keeps the base from scratching. It's stainless steel to match the sink, and it stands up to hot water and daily use. The raised grid gives you a place to drain or defrost without food sitting in water. Lift it out to clean or put it through the dishwasher. 1 year warranty.

• Sized for the Spectra half bowl, so it sits flat and stays put
• Stainless steel that matches the bowl and takes daily use
• Raised surface for draining or defrosting
• Dishwasher safe and easy to lift out
• Keeps the half bowl base free of marks
• 1 year warranty

Check your sink is a Spectra double bowl before you order; it won't fit the main bowl.

Pair it with the Spectra main bowl protector in Stainless Steel.

Specifications

Construction material: Stainless Steel
Suits: Oliveri Spectra half bowl
Warranty: 1 year

What's In The Box

• 1 x Bowl Protector

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Bowl looking scratched under the daily pile of pots? The Oliveri Spectra Main Bowl Protector in Copper sits in the base of your Spectra main bowl and takes the knocks instead of the sink. It's coloured stainless steel, so it stands up to heavy pans and hot water, and the copper finish matches Oliveri's copper tapware and wastes if you've gone that way. It doubles as a raised rack for defrosting or draining, which keeps food out of the wash water. Lift it out to clean and drop it back in. 1 year warranty.

• Sits in the base of the Spectra main bowl, so pots and cutlery land on the protector, not your sink
• Coloured stainless steel that copes with hot water and heavy pans
• Copper finish to match Oliveri copper accessories and tapware
• Gives you a raised surface for defrosting or draining
• Lifts out for cleaning and goes in the dishwasher
• 1 year warranty

Check your sink model page to confirm it takes the Spectra main bowl size before ordering.

Pair it with the Spectra half bowl protector in Copper for a double bowl sink.

Specifications

Construction material: Coloured Stainless Steel
Suits: Oliveri Spectra main bowl
Warranty: 1 year

What's In The Box

• 1 x Bowl Protector

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Sink with no drainer and a bench that's always wet? The Oliveri Bench Top Drainer Tray in Copper sits next to the sink and catches the drips from washed dishes or defrosting food. It's copper coloured stainless steel, 430mm x 330mm x 30mm, with an angled base so the water runs back into the sink rather than pooling on the bench. Handy for a single bowl or undermount sink where you've lost the drainer. Wipe it down or put it in the dishwasher. 1 year warranty.

• 430mm x 330mm x 30mm tray that sits on the bench beside the sink
• Angled base drains water back into the sink instead of onto the bench
• Copper coloured stainless steel to match Oliveri copper accessories
• Protects the benchtop when draining dishes or defrosting
• Lifts away to clean, dishwasher safe
• 1 year warranty

Measure the bench beside your sink to make sure the 430mm tray fits with the lip over the bowl.

Pair it with the Oliveri Spectra bowl protectors in Copper for the full set.

Specifications

Construction material: Copper Coloured Stainless Steel
Overall length: 430mm
Overall width: 330mm
Overall height: 30mm
Suits: Any bench next to the sink
Warranty: 1 year

What's In The Box

• 1 x Drainer Tray

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Sink base scratched from years of pots? The Oliveri Spectra Main Bowl Protector in Stainless Steel sits in the base of your Spectra main bowl and takes the hits for you. It's stainless steel, so it matches the sink and handles hot water and heavy pans without fuss. The raised grid gives you a spot to drain a colander or defrost meat without it sitting in the wash water. Lift it out to rinse or drop it in the dishwasher. 1 year warranty.

• Made for the Spectra main bowl, so it sits flat in the base
• Stainless steel that matches the sink and copes with heavy pans
• Raised surface for draining or defrosting
• Lifts out and is dishwasher safe
• Stops cutlery and pots marking the sink
• 1 year warranty

Confirm your sink takes the Spectra main bowl size on the sink product page.

Add the Spectra half bowl protector in Stainless Steel for the other side of a double bowl.

Specifications

Construction material: Stainless Steel
Suits: Oliveri Spectra main bowl
Warranty: 1 year

What's In The Box

• 1 x Bowl Protector

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Half bowl copping the rough treatment? The Oliveri Spectra Half Bowl Protector in Copper drops into the smaller bowl of a Spectra double sink and keeps the base free of scratches. Coloured stainless steel handles hot water and heavy use, and the copper tone ties in with Oliveri's copper range. It also gives you a raised spot to drain a colander or defrost dinner without it sitting in the wash water. Pull it out to rinse or put it through the dishwasher. 1 year warranty.

• Made for the Spectra half bowl, so it sits flat and stays put
• Coloured stainless steel that shrugs off pans and cutlery
• Copper finish that matches the rest of the Oliveri copper accessories
• Raised surface for draining or defrosting
• Dishwasher safe and easy to lift out
• 1 year warranty

Confirm your sink is a Spectra double bowl before you order; it won't suit the main bowl.

Add the Spectra main bowl protector in Copper to do the other side.

Specifications

Construction material: Coloured Stainless Steel
Suits: Oliveri Spectra half bowl
Warranty: 1 year

What's In The Box

• 1 x Bowl Protector

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages