Oliveri

Looking for the classic Australian kitchen sink with a bowl big enough for the stock pot? The Oliveri Petite 1 & 1/2 Bowl Sink With Drainer pairs a deep main bowl with a half bowl and a drainer, with rear waste outlets so the cupboard underneath stays clear. It's made in Adelaide, South Australia from 0.9mm thick 304 grade stainless steel. It fits as a topmount with one tap hole punched for your mixer, so it goes into laminate, timber or stone. Two 90mm basket wastes, adjustable clips, sealing foam, a bamboo chopping board and a colander are all in the box. Oliveri backs it with a lifetime manufacturer's warranty (see Oliveri's terms), as it has for decades.

• Deep main bowl plus a half bowl, so there's room for big cookware and a rinse bowl
• Built in drainer for dishes and washed vegetables
• Rear waste outlets that leave more storage in the cupboard
• Australian made in Adelaide from 0.9mm 304 grade polished stainless steel
• Topmount installation with one tap hole, which suits most benches and mixers
• Bamboo chopping board, colander, two 90mm basket wastes, adjustable clips and sealing foam included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 980 x 192 x 480mm with a 960 x 460mm cut-out and 95mm corners, and it needs a 600mm cabinet under the bowls. No overflow is fitted, so ask your plumber to connect the wastes and mixer.

Oliveri's Petite drainer baskets and bowl protectors are shaped for these bowls.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 980 x 192 x 480 mm
Mounting: Topmount
Bowl configuration: 1 & 1/2 Bowl
Drainer: Yes
Tap holes: 1 tap hole
Cut out size: 960 x 460 x 95mm radius
Minimum cabinet size: 600 mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Short on bench space but want a second sink for the butler's pantry, bar or island? The Oliveri Sonetto Skinny Bowl Undermount Sink in Brushed Stainless Steel is just 285mm wide, so it slips into a 500mm cabinet beside a dishwasher or drawers. It's made from 1.2mm thick 304 grade 18/10 stainless steel with softly squared corners and sound proofing, so it feels and sounds like a full sized sink. As an undermount it fixes beneath a stone or solid surface bench with no tap hole, leaving the tap to be drilled into the bench. A 90mm basket waste and mounting clips come in the box. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• 285mm wide single bowl, so it fits where a standard sink won't
• 1.2mm thick 18/10 brushed 304 grade stainless steel for a sturdy, dent resistant bowl
• Softly squared corners that hold a few glasses or a saucepan and still wipe clean
• Sound proofing on the underside to cut noise from running water
• Undermount fitting with no tap hole, so the bench top stays uninterrupted
• 90mm basket waste and mounting clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 285 x 176 x 455mm and it needs a stone or solid surface bench and a 500mm cabinet. Your stonemason cuts the hole and your plumber connects the waste.

Match it with the Sonetto Double Bowl Topmount Sink for the main kitchen in the same brushed finish.

Specifications

Construction material: 304 grade, 18/10 brushed stainless steel
Finish/coating: Brushed Stainless Steel
Overall dimensions (W x D x H): 285 x 176 x 455 mm
Mounting: Undermount
Bowl configuration: Single Bowl
Minimum cabinet size: 500mm
Overflow: Not available
Country of origin: China
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Going undermount on a stone bench and want a smaller second bowl beside the main one? The Oliveri Nu-Petite 1 & 3/4 Bowl Undermount Sink fixes beneath a stone or solid surface bench, with a full bowl for washing and a three quarter bowl for rinsing or soaking. Waste outlets are set to the rear, so you keep more of the cupboard. It's made in Adelaide, South Australia from 0.9mm thick 304 grade stainless steel. There's no tap hole; the mixer goes through the bench. Two 90mm basket wastes, adjustable clips, sealing foam, a bamboo chopping board and a colander come in the box. Oliveri covers it with a lifetime manufacturer's warranty (see Oliveri's terms).

• Full bowl and three quarter bowl, so you can run two jobs at once
• Undermount fitting that gives a clean edge and lets you wipe straight into the sink
• Rear waste outlets that free up storage underneath
• Australian made in Adelaide from 0.9mm 304 grade polished stainless steel
• No tap hole, so your mixer is positioned in the bench
• Bamboo chopping board, colander, two 90mm basket wastes, clips and sealing foam included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 791 x 218 x 506mm and it needs an 800mm cabinet and a stone or solid surface bench. Your stonemason cuts the opening and your plumber connects the wastes.

Oliveri's Nu-Petite drainer basket sits across the main bowl so you don't miss a drainer board.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 791 x 218 x 506 mm
Mounting: Undermount
Bowl configuration: 1 & 3/4 Bowl
Minimum cabinet size: 800mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Prefer rounded bowls that are easier to wipe than sharp corners? The Oliveri Monet Double Bowl Topmount Sink has two bowls with curved profiles and waste outlets to the rear, so you keep more cupboard space beneath. It's made in Adelaide, South Australia from 0.9mm thick 304 grade stainless steel. It sits into the bench as a topmount with one tap hole punched for your mixer, so it suits most benches and most taps. There's no drainer, which suits a kitchen with a dishwasher or a tight run of bench. The box includes two basket wastes, mounting clips, sealing foam, a colander and a bamboo chopping board. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Two curved bowls that are easy to clean and kind on glassware
• Rear waste outlets that leave more usable space in the cupboard
• Australian made in Adelaide from 0.9mm 304 grade polished stainless steel
• Topmount installation with one tap hole for a standard sink mixer
• No drainer, which keeps the width down to 815mm
• Colander, bamboo chopping board, two basket wastes, clips and sealing foam in the box
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 815 x 195 x 500mm and it needs an 800mm cabinet. No overflow is fitted, so have your plumber connect the wastes and mixer.

Oliveri's Monet drainer basket hooks over a bowl so dishes can drip dry without a drainer board.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 815 x 195 x 500 mm
Mounting: Topmount
Bowl configuration: Double Bowl
Tap holes: 1 tap hole
Minimum cabinet size: 800mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Kitchen laid out with the dishwasher to the left of the sink? The Oliveri Santorini 1 & 3/4 Bowl Topmount Sink With Drainer in Black Granite, Left Hand Drainer, puts the drainer on the left and the bowls on the right, so rinsed dishes go straight into the machine. You get a main bowl and a three quarter bowl in a 1160mm sink. It's made in Italy from granite composite, 80% granite and quartz plus 20% resin, which takes heat and resists scratches while the flecked finish hides marks. It fits as a topmount with one tap hole punched for your mixer. An overflow is included, plus two 90mm covered basket wastes and clips. Oliveri backs it with a lifetime manufacturer's warranty (see Oliveri's terms).

• Left hand drainer with the bowls on the right, so check this matches your layout before you order
• Main bowl plus three quarter bowl, which gives you a soak bowl beside the wash bowl
• Black granite finish with a natural speckle that forgives water spots
• Granite composite made in Italy, 80% granite and quartz plus 20% resin, for heat and scratch resistance
• Topmount with one tap hole, so it suits laminate, timber or stone benches
• Overflow fitted, with two 90mm covered basket wastes and clips supplied
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 1160 x 205 x 500mm with a 1140 x 480mm cut-out and 10mm corners, and it needs an 800mm cabinet under the bowls. Your plumber connects the wastes and mixer.

Oliveri's Santorini drainer basket fits the main bowl for extra drying space.

Specifications

Construction material: 80% granite and quartz particles and 20% acrylic
Finish/coating: Black Granite
Overall dimensions (W x D x H): 1160 x 205 x 500 mm
Mounting: Topmount
Bowl configuration: 1 & 3/4 Bowl
Drainer: Left Hand Drainer
Tap holes: 1 tap hole only
Cut out size: 1140W x 480H x 10R mm
Minimum cabinet size: 800mm
Overflow: Included
Country of origin: Italy
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fitting out a laundry, unit or holiday house and only need one bowl? The Oliveri Endeavour Single Bowl Sink With Drainer Right Hand Drainer fits a 500mm cabinet and gives you a single square bowl with the drainer on the right. It's made in Adelaide, South Australia from 0.9mm thick 304 grade stainless steel, with an embossed drainer that drains back into the bowl rather than onto the bench. It's a topmount sink with one tap hole punched for a mixer, so it suits laminate as well as stone. A 90mm basket waste and adjustable clips come in the box. Oliveri covers it with a lifetime manufacturer's warranty (see Oliveri's terms), which is more than you'd expect from a sink this simple.

• Single bowl with a right hand drainer, so confirm the orientation suits your layout
• Suits a 500mm cabinet, which makes it an easy swap in a small kitchen or laundry
• Australian made in Adelaide from 0.9mm 304 grade polished stainless steel
• Embossed drainer that keeps water off the bench
• Topmount with one tap hole for a standard sink mixer
• 90mm basket waste and adjustable clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 770 x 164 x 480mm with a 750 x 460mm cut-out and 15mm corners. Your plumber fits the waste and mixer once the sink is clipped in.

Add an Oliveri colander or chopping board made for the Endeavour bowl and the drainer doubles as a prep bench.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 164 x 480 mm
Mounting: Topmount
Bowl configuration: Single Bowl
Drainer: Right Hand Drainer
Tap holes: 1 tap hole
Cut out size: 750 x 460 x 15mm radius
Minimum cabinet size: 500mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Prefer sharp, square bowls over the usual rounded pressing? The Oliveri Diaz 1 & 1/2 Bowl Sink With Drainer Left Hand Drainer puts the drainer on the left and the bowls on the right, so check that matches your layout before you order. It's made in Adelaide, South Australia from 0.9mm thick 18/10 polished 304 grade stainless steel, with a full bowl and a half bowl for rinsing or peelings. It's a topmount sink with one tap hole punched for your mixer. The box includes two basket wastes, mounting clips, sealing foam, a colander and a bamboo chopping board, so it's ready to use as a prep station. Oliveri backs it with a lifetime manufacturer's warranty (see Oliveri's terms).

• Left hand drainer with the bowls on the right, so get the orientation right for your bench
• Square cornered full bowl and half bowl, which fit trays and give you a separate rinse bowl
• Australian made in Adelaide from 0.9mm 18/10 polished 304 grade stainless steel
• Topmount installation with one tap hole, so it suits most benches and a standard mixer
• Colander and bamboo chopping board included, so you can prep over the sink from day one
• Two basket wastes, mounting clips and sealing foam in the box
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 980 x 192 x 480mm with a 960 x 460mm cut-out and 15mm corners, and it needs a 600mm cabinet under the bowls. No overflow on this model; ask your plumber to connect the wastes.

Oliveri's drainer baskets and bowl protectors for the Diaz range keep the polished steel looking new.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 980 x 192 x 480 mm
Mounting: Topmount
Bowl configuration: 1 & 1/2 Bowl
Drainer: Left Hand Drainer
Tap holes: 1 tap hole
Cut out size: 960 x 460 x 15mm radius
Minimum cabinet size: 600mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a sink in a warm metal tone to go with brass or copper tapware? The Oliveri Spectra Single Bowl Sink in Copper is 1.2mm thick 304 grade 18/10 stainless steel with a copper coloured finish, so it looks like a specialty sink but cleans like steel. The single bowl is 540mm wide with the waste outlet to the rear, which keeps more cupboard space free. Sound proofing cuts the noise of running water. It's a universal sink that fits as an undermount, inset or flushmount, with no tap hole, so your mixer goes in the bench. A basket waste, clips, a bench top drainer tray, a bamboo board and a matching bowl protector are all in the box. Lifetime manufacturer's warranty (see Oliveri's terms).

• Copper coloured finish over 1.2mm 304 grade 18/10 stainless steel, so it's tough as well as warm toned
• 540mm single bowl that fits a 600mm cabinet
• Rear waste outlet, which frees up room in the cupboard below
• Sound proofing that quietens the bowl
• Universal design for undermount, inset or flushmount fitting with no tap hole
• Matching bowl protector, bamboo chopping board, drainer tray, basket waste and clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 540 x 210 x 445mm. Undermount or flushmount fitting needs a stone or solid surface bench, so confirm with your stonemason and plumber. No overflow is fitted.

Match it with the Spectra 1 & 1/2 Bowl Sink if you need a half bowl, or add a spare Spectra bowl protector in the same finish.

Specifications

Construction material: 304 grade, 18/10 coloured stainless steel
Finish/coating: Copper
Overall dimensions (W x D x H): 540 x 210 x 445 mm
Mounting: Undermount
Bowl configuration: Single Bowl
Minimum cabinet size: 600mm
Overflow: Not available
Country of origin: China
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Not sure yet whether the new bench will be laminate or stone? The Oliveri Endeavour Double Bowl Universal Sink can be fitted as a topmount or an undermount, so you can order the sink before the bench is decided. It's made in Adelaide, South Australia from 0.9mm thick 304 grade stainless steel with square corners, and gives you two full bowls with no drainer, which suits a kitchen with a dishwasher. One tap hole is punched for your mixer. Two 90mm basket wastes and adjustable clips are supplied. Oliveri covers it with a lifetime manufacturer's warranty (see Oliveri's terms), so it's a sensible pick for a renovation you only want to do once.

• Universal design that installs as a topmount or an undermount, so it suits either bench type
• Two full bowls with no drainer, which saves bench space where a dishwasher does the drying
• Australian made in Adelaide from 0.9mm 304 grade polished stainless steel
• Square corners that hold more and are easy to wipe out
• One tap hole for a standard sink mixer
• Two 90mm basket wastes and adjustable clips in the box
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 775 x 158 x 500mm and it needs an 800mm cabinet. Undermount fitting needs a stone or solid surface bench, so confirm with your stonemason and plumber first.

Oliveri's Endeavour colanders and drainer baskets give you somewhere to drain dishes without a drainer board.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 775 x 158 x 500 mm
Mounting: Universal (topmount or undermount)
Bowl configuration: Double Bowl
Tap holes: 1 tap hole only
Minimum cabinet size: 800mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fancy a black sink that's still stainless steel underneath? The Oliveri Spectra 1 & 1/2 Bowl Sink in Black is 1.2mm thick 304 grade 18/10 stainless steel with a coloured finish, so you get the look of a dark composite with the strength and easy care of steel. There's a full bowl for washing and a half bowl for rinsing or peelings, both with waste outlets set to the rear so you keep more cupboard space below. Sound proofing keeps it quiet. It's a universal sink, so it can go in as an inset, undermount or flushmount, and there's no tap hole, so your mixer mounts in the bench. Two basket wastes, clips, a drainer tray, a bamboo board and two matching bowl protectors are in the box. Lifetime manufacturer's warranty (see Oliveri's terms).

• Black coloured finish over 1.2mm thick 304 grade 18/10 stainless steel, so it's tough as well as dark
• Full bowl plus half bowl, which gives you a rinse or scrap bowl without a wide cut-out
• Rear waste outlets that leave more usable room in the cupboard underneath
• Sound proofing to take the ring out of the steel
• Universal design for inset, undermount or flushmount fitting with no tap hole
• Two matching bowl protectors, bamboo chopping board, drainer tray, two basket wastes and clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 790 x 210 x 445mm and it needs a 900mm cabinet. Undermount or flushmount fitting needs a stone or solid surface bench, so talk to your stonemason and plumber before ordering.

The Spectra Double Bowl Sink in Black is the same finish if you'd rather two full bowls.

Specifications

Construction material: 304 grade, 18/10 coloured stainless steel
Finish/coating: Black
Overall dimensions (W x D x H): 790 x 210 x 445 mm
Mounting: Topmount
Bowl configuration: 1 & 1/2 Bowl
Minimum cabinet size: 900mm
Overflow: Safeguard
Country of origin: China
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

After a double bowl that looks sharper than the usual pressed sink? The Oliveri Sonetto Double Bowl Topmount Sink in Brushed Stainless Steel is formed from 1.2mm thick 304 grade 18/10 stainless steel, with softly squared corners that are easy to wipe out. Sound proofing pads on the underside take the clatter out of running water and dropped cutlery. It's a topmount with one tap hole, so it suits most benches and a standard sink mixer. You get more than the sink in the box: two 90mm basket wastes, mounting clips, a bench top drainer tray and a bamboo chopping board. Oliveri is Australian owned and backs it with a lifetime manufacturer's warranty (see Oliveri's terms).

• 1.2mm thick 304 grade 18/10 stainless steel, heavier than most topmount sinks, so it feels solid and resists dents
• Brushed finish that hides fine scratches and fingerprints better than a mirror polish
• Softly squared corners that give you room in the bowl but still wipe clean easily
• Sound proofing underneath, which quietens the sink and helps keep washing up water warm
• Topmount with one tap hole, so it fits laminate, timber or stone benches
• Bamboo chopping board and bench top drainer tray included, with two 90mm basket wastes and clips
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 785 x 211 x 510mm with a 769 x 494mm cut-out and 10mm corners, so you need an 800mm cabinet. There's no overflow on this model, so get your plumber to connect the wastes and mixer.

Oliveri makes custom colanders and drainer baskets for the Sonetto bowls if you want more prep space.

Specifications

Construction material: 304 grade, 18/10 brushed stainless steel
Finish/coating: Brushed Stainless Steel
Overall dimensions (W x D x H): 785 x 211 x 510 mm
Mounting: Topmount
Bowl configuration: Double Bowl
Tap holes: 1 tap hole only
Cut out size: 769 x 494 x 10mm radius
Minimum cabinet size: 800mm
Overflow: Not available
Country of origin: China
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Swapping out a tired 1 & 3/4 bowl sink in a rental or first home? The Oliveri Endeavour 1 & 3/4 Bowl Sink With Drainer Right Hand Drainer is the straightforward choice. The drainer sits on the right, with a full bowl and a three quarter bowl to the left. It's made in Adelaide, South Australia from 0.9mm thick 304 grade stainless steel, with square corners and an embossed drainer that sends water back into the bowl. It's a topmount sink with one tap hole punched for your mixer. Two 90mm basket wastes and adjustable clips come in the box. Oliveri backs it with a lifetime manufacturer's warranty (see Oliveri's terms), which is rare at this price.

• Right hand drainer with the bowls on the left, so check it suits your bench before ordering
• Full bowl and three quarter bowl, which lets you soak and rinse at the same time
• Australian made in Adelaide from 0.9mm 304 grade polished stainless steel
• Embossed drainer that drains back into the bowl instead of pooling
• Topmount with one tap hole for a standard sink mixer
• Two 90mm basket wastes and adjustable clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 1080 x 164 x 480mm with a 1060 x 460mm cut-out and 15mm corners, and it needs a 700mm cabinet under the bowls. Ask your plumber to connect the wastes and mixer.

Oliveri's colanders and chopping boards for the Endeavour range turn the main bowl into a prep area.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1080 x 164 x 480 mm
Mounting: Topmount
Bowl configuration: 1 & 3/4 Bowl
Drainer: Right Hand Drainer
Tap holes: 1 tap hole
Cut out size: 1060 x 460 x 15mm radius
Minimum cabinet size: 700mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Small kitchen, bold finish? The Oliveri Spectra Single Bowl Sink in Brushed Gold fits a 600mm cabinet and gives you one 540mm bowl in a brushed gold coloured finish over 1.2mm thick 304 grade 18/10 stainless steel. It pairs with gold or brass tapware and cleans like any steel sink. The waste outlet sits to the rear so the cupboard underneath stays useful, and sound proofing keeps it quiet. It's a universal sink that fits as an undermount, inset or flushmount, with no tap hole, so your mixer goes through the bench. The box includes a basket waste, clips, a bench top drainer tray, a bamboo board and a matching bowl protector. Lifetime manufacturer's warranty (see Oliveri's terms).

• Brushed gold coloured finish over 1.2mm 304 grade 18/10 stainless steel, so it's hard wearing as well as striking
• 540mm single bowl that suits a 600mm cabinet, island or butler's pantry
• Rear waste outlet for more room in the cupboard below
• Sound proofing that cuts the noise of running water
• Universal design for undermount, inset or flushmount fitting with no tap hole
• Matching bowl protector, bamboo chopping board, drainer tray, basket waste and clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 540 x 210 x 445mm. Undermount or flushmount fitting needs a stone or solid surface bench; ask your stonemason and plumber. No overflow is fitted.

The Spectra 1 & 1/2 Bowl Sink in Brushed Gold is the matching step up for the main kitchen.

Specifications

Construction material: 304 grade, 18/10 coloured stainless steel
Finish/coating: Brushed Gold
Overall dimensions (W x D x H): 540 x 210 x 445 mm
Mounting: Undermount
Bowl configuration: Single Bowl
Minimum cabinet size: 600mm
Overflow: Not available
Country of origin: China
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Double bowl plus drainer, without spending big? The Oliveri Endeavour Double Bowl Sink With Drainer Right Hand Drainer has the drainer on the right and both bowls on the left, so measure your bench with that in mind. It's made in Adelaide, South Australia from 0.9mm thick 304 grade stainless steel, with square corners and an embossed drainer that channels water back where it belongs. It's a topmount sink with one tap hole for your mixer, which keeps the install simple. In the box are two 90mm basket wastes and adjustable clips. Oliveri backs it with a lifetime manufacturer's warranty (see Oliveri's terms), so it's built to be fitted once.

• Right hand drainer with two full bowls on the left, so one can soak while you wash in the other
• Australian made in Adelaide from 0.9mm 304 grade polished stainless steel
• Square cornered bowls that fit trays and pots flat
• Embossed drainer with ridges that run water back into the bowl
• Topmount installation with one tap hole, which suits most benches and mixers
• Two 90mm basket wastes and adjustable clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 1135 x 164 x 480mm with a 1115 x 460mm cut-out and 15mm corners, and it needs an 800mm cabinet under the bowls. Your plumber connects the wastes and the mixer.

Oliveri's Endeavour chopping boards and bowl protectors are made to fit these bowls.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1135 x 164 x 480 mm
Mounting: Topmount
Bowl configuration: Double Bowl
Drainer: Right Hand Drainer
Tap holes: 1 tap hole
Cut out size: 1115 x 460 x 15mm radius
Minimum cabinet size: 800mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a single bowl for a 500mm cabinet that still takes a decent pot? The Oliveri Nu-Petite Standard Bowl Topmount Sink is 460mm wide with one deep bowl and a rear waste outlet, so the cupboard underneath isn't full of plumbing. It's made in Adelaide, South Australia from 0.9mm thick 304 grade stainless steel. The sink sits into the bench as a topmount with one tap hole punched for your mixer, so it suits any bench material. Basket wastes, adjustable clips, sealing foam, a bamboo chopping board and a colander come in the box, which makes a small sink work harder. Oliveri covers it with a lifetime manufacturer's warranty (see Oliveri's terms).

• 460mm wide single bowl that fits a 500mm cabinet
• Rear waste outlet for more usable space in the cupboard below
• Australian made in Adelaide from 0.9mm 304 grade polished stainless steel
• Topmount with one tap hole for a standard sink mixer
• Bamboo chopping board and colander included, so you can chop and drain over the bowl
• Basket wastes, adjustable clips and sealing foam in the box
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 460 x 212 x 500mm with a 440 x 480mm cut-out and 15mm corners. Your plumber connects the waste and mixer once it's clipped in.

Step up to the Nu-Petite Double Bowl Topmount Sink if you have a 900mm cabinet to fill.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 460 x 212 x 500 mm
Mounting: Topmount
Bowl configuration: Single Bowl
Tap holes: 1 tap hole only
Cut out size: 440 x 480 x 15mm radius
Minimum cabinet size: 500mm
Overflow: Special order option
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Gold tapware already picked and want the sink to match? The Oliveri Spectra 1 & 1/2 Bowl Sink in Brushed Gold is 1.2mm thick 304 grade 18/10 stainless steel with a brushed gold coloured finish, so it carries the look without giving up the strength of steel. A full bowl handles the washing and a half bowl takes rinsing or scraps, both with rear waste outlets to keep the cupboard below clear. Sound proofing keeps it quiet. It's a universal sink for undermount, inset or flushmount fitting, and there's no tap hole, so your mixer mounts in the bench. Two basket wastes, clips, a drainer tray, a bamboo board and two matching bowl protectors come in the box. Lifetime manufacturer's warranty (see Oliveri's terms).

• Brushed gold coloured finish over 1.2mm 304 grade 18/10 stainless steel, which hides fingerprints better than polished
• Full bowl plus half bowl, so you get a rinse bowl without a wide cut-out
• Rear waste outlets that leave more storage in the cupboard
• Sound proofing to take the ring out of the steel
• Universal design for undermount, inset or flushmount fitting with no tap hole
• Two matching bowl protectors, bamboo chopping board, drainer tray, two basket wastes and clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 790 x 210 x 445mm and it needs a 900mm cabinet. Undermount or flushmount fitting needs a stone or solid surface bench, so talk to your stonemason and plumber first.

The Spectra Single Bowl Sink in Brushed Gold is the smaller match for a butler's pantry or bar.

Specifications

Construction material: 304 grade, 18/10 coloured stainless steel
Finish/coating: Brushed Gold
Overall dimensions (W x D x H): 790 x 210 x 445 mm
Mounting: Undermount
Bowl configuration: 1 & 1/2 Bowl
Minimum cabinet size: 900mm
Overflow: Safeguard
Country of origin: China
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Keep the dish rack off the bench with a basket made for a Santorini bowl. The Oliveri Santorini Drainer Basket is chrome plated stainless steel, 350 x 128 x 370mm, sized to sit inside the bowl of Oliveri Santorini sinks or on the drainer. Rubber feet come in the box so it won't scratch the granite composite surface. Lift it out to clean the bowl, then drop it back in. Covered by a 1 year warranty on replacement parts.

• Sized for the bowl of Oliveri Santorini sinks
• Chrome plated stainless steel that shrugs off water and detergent
• Rubber feet supplied to protect the granite composite
• Use it in the bowl for draining or on the drainer as a rack
• 1 year warranty on replacement parts

Check your sink is a Santorini; other ranges have their own basket sizes.

Match it with the Oliveri Santorini Bamboo Chopping Board for prep over the bowl.

Specifications

Construction material: Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 350 x 128 x 370 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a colander that sits across the bowl rather than in the bottom of it? The Oliveri Stainless Steel Professional Colander is a wide, shallow 445 x 270mm colander at 75mm deep in 304 stainless steel, which fits into the bowl of some Oliveri sinks for rinsing greens, draining pasta or thawing under the tap. Steel means no stains or odours, and it rinses clean. Measure your bowl first. Covered by a 1 year warranty on replacement parts.

• 304 stainless steel that won't stain, warp or hold smells
• Wide 445 x 270mm shape, so produce spreads out and drains fast
• 75mm deep, which leaves working room beneath it in the bowl
• Fits into the bowl of some Oliveri sinks, so check your size
• 1 year warranty on replacement parts

Measure the inside of your bowl against 445 x 270mm before ordering.

For a deeper option see the Oliveri Stainless Steel Deep Colander.

Specifications

Construction material: stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 445 x 75 x 270 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Chop right over the sink with a board made for it. The Oliveri Lakeland and Endeavour Main Bowl Bamboo Chopping Board fits over the main bowl of Oliveri Lakeland and Endeavour sinks, with a 395 x 350mm bamboo surface at 30mm thick. Peelings and offcuts go straight into the bowl, and the board lifts away when you need the sink. It's made in Australia and backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Sized for the main bowl of Oliveri Lakeland and Endeavour sinks
• 395 x 350mm bamboo surface that's large enough for a roast
• 30mm thick, so it sits firm under a knife
• Scraps drop straight into the bowl while you work
• Australian made with a lifetime manufacturer's warranty (see Oliveri's terms)

Hand wash and dry after use to protect the bamboo.

Pair it with the Oliveri Foldamate for 480mm sinks, which suits the Endeavour range, to drain over the other bowl.

Specifications

Construction material: bamboo
Finish/coating: Bamboo
Overall dimensions (W x D x H): 395 x 30 x 350 mm
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a serious main bowl under your stone bench without giving up a second one? The Oliveri Nu-Petite Double Bowl Undermount Sink pairs a generous main bowl with a smaller side bowl in 890mm, with rounded drainer flutes and rear waste outlets so you keep more cupboard room below. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. It's an undermount with no tap hole, so the mixer mounts through the bench. In the box you get two 90mm basket wastes, adjustable clips, sealing foam, a bamboo chopping board and a colander. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Generous main bowl plus a side bowl, so soaking and rinsing happen at once
• Rear waste outlets that free up space in the cupboard underneath
• Rounded drainer flutes which help reduce surface scratching
• 18/10 polished 304 grade stainless steel at 0.9mm thick for durability
• Undermount with no tap hole, for a clean edge under stone or solid surface benches
• Bamboo chopping board and colander included for prep over the bowls
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 900 x 720mm minimum cabinet and a stone or solid surface bench. Your stonemason cuts the opening and your plumber connects both wastes.

Add the Oliveri Nu-Petite Main Bowl Drainer Basket for rinsing and drying in the main bowl.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 890 x 216 x 516 mm
Tap holes: n/a
Minimum cabinet size: 900 x 720mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Protect the granite composite and gain a chopping board at the same time. The Oliveri Santorini Bamboo Chopping Board is sized to sit on top of Oliveri Santorini sinks, with a 450 x 280mm bamboo surface at 30mm thick, so you prep over the bowl and brush peelings straight in. Lift it clear when you need the full sink, and it stores flat in a cupboard between uses. Covered by a 1 year warranty on replacement parts.

• Sized to sit on top of Oliveri Santorini sinks
• 450 x 280mm bamboo surface with room for serious prep
• 30mm thick so it sits firm while you cut
• Scraps go straight into the bowl below
• 1 year warranty on replacement parts

Hand wash and dry it after use to keep the bamboo flat.

The Oliveri Santorini Drainer Basket is the matching piece for rinsing and drying in the bowl.

Specifications

Construction material: bamboo
Finish/coating: Bamboo
Overall dimensions (W x D x H): 450 x 30 x 280 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Drying glasses in a Nu-Petite bowl without a rack on the bench? The Oliveri Nu-Petite Main Bowl Drainer Basket is sized for the main bowl of Oliveri Nu-Petite sinks at 400 x 130 x 370mm, in chrome plated 304 stainless steel with rubber feet to protect the bowl. Use it inside the bowl for draining or lift it onto the drainer as a rack. Made in Australia and backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Made for the main bowl of Oliveri Nu-Petite sinks
• Chrome plated 304 stainless steel that stays rust free
• Rubber feet included to stop it marking the sink
• Works inside the bowl or up on the drainer
• Australian made with a lifetime manufacturer's warranty (see Oliveri's terms)

Confirm your sink is a Nu-Petite before ordering.

Pair it with the Oliveri Nu-Petite Main Bowl Colander and Bamboo Chopping Board.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 400 x 130 x 370 mm
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

One board for two bowls? The Oliveri Nu-Petite Main and 5 Side Bowl Bamboo Chopping Board is sized to sit over the main bowl or the side bowl of Oliveri Nu-Petite sinks, at 400 x 290mm and 20mm thick, so you chop where it suits and sweep scraps into whichever bowl is under it. It's made in Australia from bamboo and backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Fits over the main bowl and the side bowl of Oliveri Nu-Petite sinks
• 400 x 290mm bamboo surface with room for a full prep job
• 20mm thick and light enough to move between bowls
• Scraps go straight into the bowl below
• Australian made with a lifetime manufacturer's warranty (see Oliveri's terms)

Hand wash and dry after each use.

Add the Oliveri Nu-Petite Main Bowl Colander for rinsing while you chop.

Specifications

Construction material: bamboo
Finish/coating: Bamboo
Overall dimensions (W x D x H): 400 x 20 x 290 mm
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Worried about scratching a new sink? The Oliveri Sonetto and Apollo Main Bowl Protector is a 304 stainless steel tray that sits in the main bowl of Oliveri Sonetto and Apollo sinks, measuring 393 x 23 x 343mm, so pots and cutlery land on the protector and not the polished bowl. Rubber feet in the box keep it steady and off the steel. Lift it out to clean underneath. Covered by a 1 year warranty on replacement parts.

• Fits inside the main bowl of Oliveri Sonetto and Apollo sinks
• 304 stainless steel that takes the knocks instead of your sink
• Rubber feet included so it sits firm and doesn't mark the bowl
• 393 x 343mm to cover the bowl floor
• 1 year warranty on replacement parts

Confirm your sink is a Sonetto or Apollo main bowl before ordering.

The Oliveri Sonetto and Apollo Series Bamboo Chopping Board sits over the same bowl for prep.

Specifications

Construction material: Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 393 x 23 x 343 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Got a smaller bowl and a crowded bench? The Oliveri Cooking Mate Series KitchenMate is a compact stainless steel drainer mat, 370 x 300mm and 10mm thick, that sits over a sink bowl so cups, cutlery and rinsed fruit drain into the sink. It's the smaller cousin of the Foldamate, which makes it a fit for half bowls and compact sinks. Rolls up for the drawer when you're finished. Covered by a 1 year warranty on replacement parts.

• Compact 370 x 300mm size for smaller bowls and half bowls
• Stainless steel that handles hot pans and wet dishes without rusting
• Drains straight into the sink to keep the bench clear
• Only 10mm thick and stores in a drawer
• 1 year warranty on replacement parts

Check your bowl width against 300mm before ordering.

Larger bowl? The Oliveri Cooking Mate Series Foldamate covers up to 460 x 435mm.

Specifications

Construction material: Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 370 x 10 x 300 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Is the bench run to the left of your sink? The Oliveri Diaz Single Bowl Topmount Sink with Left Hand Drainer puts the drainer there, so wet dishes drip over the sink and not the bench. One square cornered bowl and a drainer fit into 770mm and a 500mm cabinet. Oliveri makes it in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. It mounts from the top with one tap hole punched for a mixer. The box includes a basket waste, mounting clips, a colander, a bamboo chopping board and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Left hand drainer to suit a kitchen with the work surface on the left of the sink
• Single bowl in 770mm that fits a 500mm cabinet
• 18/10 polished 304 grade stainless steel at 0.9mm thick that resists dents and stains
• One tap hole punched, ready for your mixer
• Colander and bamboo chopping board in the box for prep over the bowl
• Basket waste, mounting clips and sealing foam included
• Australian made in Adelaide and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 750 x 460mm cut-out with 15mm radius corners. Ask your plumber to connect the waste.

The Oliveri Diaz Single Bowl Sink with Right Hand Drainer is the mirror version if your layout changes.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 192 x 480 mm
Tap holes: Available 0 or 1 tap hole (specify when ordering)
Cut out size: 750 x 460 x 15mm radius
Minimum cabinet size: 500mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Sick of a dish rack hogging the bench? The Oliveri Foldamate for 480mm sinks is a stainless steel roll up drainer mat that lies across the bowl of a sink 480mm front to back, such as the Oliveri Diaz and Endeavour ranges, so dishes and veg drain straight into the sink. It measures 480 x 340mm and only 10mm thick, and when you're done it rolls up and slides into a drawer. Covered by a 1 year warranty on replacement parts.

• Made for sinks 480mm front to back, including Oliveri Diaz and Endeavour
• Stainless steel that won't rust or hold stains
• Lies flat across the bowl so water drains into the sink, not the bench
• Rolls up to 10mm thick for storage in a drawer
• 1 year warranty on replacement parts

Measure your sink front to back; this size is for 480mm bowls.

The Oliveri Cooking Mate Series Foldamate is the alternative size for other sinks.

Specifications

Construction material: Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 480 x 10 x 340 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Have a long run of bench to fill? The Oliveri Monet Double Bowl Topmount Sink with Double Drainer spans 1500mm, with two soft curved bowls in the middle and an embossed drainer on each side, so dishes drain one way while veg dries the other. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. The sink sits topmount in the bench and has one tap hole punched for a mixer. Oliveri includes two basket wastes, mounting clips, a colander, a bamboo chopping board and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Two bowls flanked by two embossed drainers across 1500mm, which suits a big family kitchen
• Soft curved bowl shape that's easy to wipe out
• 18/10 polished 304 grade stainless steel at 0.9mm thick for long term durability
• One tap hole punched for a sink mixer
• Colander and bamboo chopping board included for prep over the bowls
• Two basket wastes, mounting clips and sealing foam in the box
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs an 800mm cabinet beneath the bowls and a bench long enough for the 1500mm sink. Your plumber connects both wastes.

The Oliveri Monet Main Bowl Drainer Basket drops into the main bowl for rinsing and drying.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1500 x 195 x 500 mm
Tap holes: Available 1 tap hole only
Minimum cabinet size: 800mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Sink cabinet only 500mm wide? The Oliveri Endeavour Single Bowl Topmount Sink with Left Hand Drainer gives you a full square cornered bowl and an embossed drainer on the left in a 770mm footprint. It's a common size in units, older kitchens and rentals, so it often replaces the existing sink without touching the bench. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. Topmount fit with one tap hole punched for a mixer. Supplied with a 90mm basket waste and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Single bowl with a left hand drainer in 770mm, which fits a 500mm cabinet
• Embossed drainer that drains back to the bowl rather than onto the bench
• 18/10 polished 304 grade stainless steel at 0.9mm thick for a sink that lasts
• One tap hole punched for a mixer
• 90mm basket waste and adjustable clips in the box
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 750 x 460mm cut-out with 15mm radius corners. Check it against your existing hole before ordering and ask your plumber to connect the waste.

Pair it with the Oliveri Lakeland and Endeavour Main Bowl Bamboo Chopping Board for prep room over the bowl.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 164 x 480 mm
Tap holes: 1 tap hole (for no tap hole order product code 'EE20')
Cut out size: 750 x 460 x 15mm radius
Minimum cabinet size: 500mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Prefer two full bowls over a drainer? The Oliveri Endeavour Double Bowl Topmount Sink gives you a pair of square cornered bowls in 770mm, which suits an 800mm cabinet and leaves the bench free either side. It's a straightforward swap for most double bowl inset sinks of the same size. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick, so it shrugs off pots, pans and years of scrubbing. Sits topmount in the bench with one tap hole for a mixer. Supplied with two 90mm basket wastes and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Two full bowls in 770mm for washing and rinsing without a drainer taking up bench
• 18/10 polished 304 grade stainless steel at 0.9mm thick that handles heavy cookware
• One tap hole for a sink mixer
• Topmount fit that drops into a 750 x 460mm cut-out
• Two 90mm basket wastes and adjustable clips in the box
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs an 800mm cabinet and a 750 x 460mm cut-out with 15mm radius corners. Your plumber connects the two wastes.

Add the Oliveri Foldamate for 480mm sinks to dry dishes over a bowl and roll it away afterwards.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 161 x 480 mm
Cut out size: 750 x 460 x 15mm radius
Minimum cabinet size: 800mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a neat little bowl for a bar, a laundry bench or a prep station? The Oliveri Endeavour Standard Bowl Undermount Sink is a 350mm wide single bowl that fixes under a stone or solid surface bench and fits a 500mm cabinet. Square corners mean it holds more than a rounded bowl of the same size. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. No tap hole, as the mixer mounts through the bench. In the box: the sink, a 90mm basket waste and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• 350mm single bowl that fits a 500mm cabinet in a bar, pantry or laundry
• Undermount fit for stone or solid surface benches, so crumbs wipe straight in
• 18/10 polished 304 grade stainless steel at 0.9mm thick for years of use
• No tap hole, which lets you place the mixer to suit the bench
• 90mm basket waste and adjustable clips supplied
• Australian made in Adelaide and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 500mm cabinet and a stone or solid surface bench. Your stonemason cuts the opening and your plumber connects the waste.

The Oliveri Endeavour Large Bowl Undermount Sink is the bigger sibling if you want a main sink from the same range.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 350 x 154 x 405 mm
Tap holes: n/a
Minimum cabinet size: 500mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want more chopping room without a bigger bench? The Oliveri Diaz and Petite Main Bowl Bamboo Chopping Board sits over the main bowl of Oliveri Diaz, Petite and Flinders sinks, giving you a 345 x 268mm bamboo surface right above the sink. At 30mm thick it feels solid under the knife, and peelings go straight into the bowl. Lift it off and the sink is back to normal. Covered by a 1 year warranty on replacement parts.

• Sized for the main bowl of Oliveri Diaz, Petite and Flinders sinks
• 30mm thick bamboo that stays put while you chop
• Scraps slide straight into the bowl below
• 345 x 268mm surface, roomy enough for a roast or a bunch of herbs
• 1 year warranty on replacement parts

Hand wash and dry after use to keep the bamboo in shape.

Match it with the Oliveri Diaz and Petite Main Bowl Colander for rinse and chop in one spot.

Specifications

Construction material: Bamboo
Finish/coating: Bamboo
Overall dimensions (W x D x H): 345 x 30 x 268 mm
Country of origin: China
Warranty: 1 year replacement parts only

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages