Chrome Taps

Shower over the bath and the diverter has given up? The Raymor Banjo BC Wall Mixer with Diverter in Chrome runs a bath spout and a shower from one point on the wall, and the diverter switches the water between them. It uses the flat mount body with four point fixing that Banjo BC is known for, which is why plumbers reach for it when the job is a replacement rather than a rebuild. The DZR brass body and a 40mm ceramic disc cartridge in a brass housing are built to keep going, and the paddle handle makes temperature easy to set. Backed by a 20 year warranty on the cartridge, body, handle and chrome finish.

• Built in diverter that sends water to the bath spout or the shower, so you only need one mixer
• Flat mount body with four point fixing for a simpler swap on existing plumbing
• DZR brass construction that stands up to Australian water for years
• 40mm ceramic disc cartridge in a brass housing for smooth, drip free control
• Chrome electroplated finish that cleans up with a wipe
• Suits water pressure from 150 to 500kPa
• 20 year warranty on the cartridge, body, handle and chrome finish

Wall mounted, for a bath and shower combination. Ask your plumber to confirm the existing pipe centres suit a flat mount body.

Match it with the Banjo BC basin mixers and sink mixer in Chrome for a consistent look.

Specifications

Construction material: DZR Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 40mm
Operating pressure: 150 to 500kPa
Lead free: Not Required
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Freestanding bath waiting on a filler? The Raymor Sturt Round Bath Filler with Hand Shower in Chrome is a floor-standing filler for freestanding baths, with the outlet sitting 976mm off the floor so it clears most bath rims. The 250mm gooseneck spout swivels, and a push pull diverter sends water to the hand shower for rinsing hair or washing the tub down. It's a DZR brass body with a zinc die cast paddle handle and a 40mm ceramic disc cartridge, and the shower hose is PVC coated with dual non return valves fitted. WELS 3 star at 9.0 litres a minute, so a bath fills at a decent pace. Backed by a 15 year warranty on the cartridge, 7 years on the body, spout and handle, and 2 years on seals, fittings and aerators.

• 250mm swivel gooseneck spout that reaches over the rim and swings clear when you're getting in
• Hand shower on a PVC coated hose for rinsing off or washing the bath down
• Push pull diverter to switch between spout and hand shower
• DZR brass body and 40mm ceramic disc cartridge, with a paddle handle for one-hand control
• Dual non return valves in the hose to protect your water supply from backflow
• WELS 3 star at 9.0 litres a minute for a quicker fill
• 15 year warranty on the cartridge, 7 years on body, spout and handle

Floor mounted, 976mm from floor to outlet centre. Your plumber needs the supply lines stubbed up through the floor beside the bath, so plan this before the floor is closed.

See the rest of the Raymor Sturt range in Chrome for matching basin and shower tapware.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S09705
Construction material: DZR Brass
Operating mechanism: Ceramic Disc
Spout function: Swivel
Country of origin: China
Warranty: 15 Years ceramic disc cartridge. 10 Years for commercial use. 7 Years body, spout, handle. 2 Years seals, tails, fittings, aerators. 1 Years finish, labour

What's In The Box

• 1 x Round bath filler with hand shower
• Installation Instructions

Old three piece bath set past saving? The Raymor Atlanta Bath Set in Chrome is the traditional three piece setup: separate hot and cold wall taps plus a 165mm fixed spout, for baths with three outlets on the wall. Cross handles in brass give it the classic look that suits older homes and period-style renovations. The bodies are DZR brass under a chrome plated finish, and the taps run on jumper valves, which means a drip is usually fixed with a new washer rather than a new tap. Flow is rated at 6.0 litres a minute. Backed by a 15 year warranty on the bodies, spout, flanges, handles and chrome finish, with 1 year on seals and jumper valves.

• Three piece set: hot tap, cold tap and 165mm fixed spout, so you replace the lot at once
• Brass cross handles that are easy to turn and suit a traditional bathroom
• DZR brass construction that resists corrosion for a long life
• Jumper valve spindles, so servicing is a low-cost washer swap
• Chrome plated finish that wipes clean and matches the Atlanta range
• 6.0 litres a minute flow at the spout
• 15 year warranty on body, spout, flanges, handles, fittings and chrome finish

Wall mounted, for baths with three tap holes. If you're going from a mixer to a set, or the other way, ask your plumber about the wall breeches.

Atlanta also does the matching wall top assemblies, spouts and washing machine stops in Chrome.

Specifications

WELS water consumption: 6.0 L/Min
Construction material: DZR Brass
Operating mechanism: Jumper Valve
Overall height: 61.5 mm
Spout reach: 165mm
Spout function: Fixed
Country of origin: China
Warranty: 15 Years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals, jumper valves and labour

What's In The Box

• 1 x Bath set
• Installation Instructions

Bath spout dripping down the tiles? The Raymor Atlanta Bath Wall Spout 165mm in Chrome is a straight swap for an old wall spout over the bath, and a natural fit if you already have Atlanta taps on the wall. It's a fixed spout in DZR brass with a chrome plated finish, 165mm reach, and a 61mm flange that covers the hole in the tiles. The inlet is a 1/2 inch BSP female thread, which is the standard fitting for a wall breech. It's a plain fixed spout that does one job and keeps doing it. Backed by a 15 year warranty on the body, spout, flange, fittings and chrome finish, with 1 year on seals.

• DZR brass body that resists dezincification, so it lasts in Australian water
• 165mm reach that suits most standard baths
• 61mm flange to hide the tile cut-out behind it
• 1/2 inch BSP female thread for a standard wall connection
• Chrome plated finish that matches Atlanta wall tops and sets
• 15 year warranty on the body, spout, flange, fittings and chrome finish

Wall mounted, 54mm high at the wall. Your plumber will need a breech at the right height above the bath rim, so check it before ordering.

Pair it with Atlanta wall top assemblies, the Atlanta Bath Set or an Atlanta shower to keep the look consistent.

Specifications

Construction material: DZR Brass
Overall height: 54 mm
Height to spout: 54mm
Spout reach: 165mm
Spout function: Fixed
Country of origin: China
Warranty: 15 Years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals, jumper valves and labour

What's In The Box

• 1 x Bath wall spout
• Installation Instructions

Want lever taps over the bath instead of the old cross handles? The Raymor Armada Quarter Turn Bath Set in Chrome is a three piece bath set with a modern twist: lever handles that turn a quarter of the way and stop, with the hot and cold rotating in opposite directions so both feel natural in the hand. Inside are ceramic disc spindles with flat sided assemblies rather than washers, so there's less to wear out. The 127mm aerated spout gives a softer stream at 6.0 litres a minute. Everything is DZR brass with a chrome plated finish. Backed by a 15 year warranty on the ceramic disc spindles, bodies, spout, flanges, handles, aerator and chrome finish, with 1 year on seals.

• Quarter turn lever handles, so full flow is one flick of the wrist
• Contra rotating hot and cold spindles, which means the levers move in mirror image and feel natural
• Ceramic disc spindles with flat sides in place of washers, for years of drip-free use
• 127mm aerated fixed spout that softens the stream and cuts splash
• DZR brass build under a chrome plated finish
• Flows at 6.0 litres a minute
• 15 year warranty covering spindles, body, spout, handles, aerator and the chrome finish

Wall mounted for baths with three tap holes. Ask your plumber to check the breech spacing matches your current set.

Match it with Armada tapware, showers and accessories for the rest of the room.

Specifications

WELS water consumption: 6.0 L/Min
Construction material: DZR Brass
Operating mechanism: Ceramic Disc
Overall height: 65 mm
Spout reach: 127mm
Spout function: Fixed
Country of origin: China
Warranty: 15 Years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals, jumper valves and labour.

What's In The Box

• 1 x Quarter turn bath set
• Installation Instructions

Wall taps over the bath or laundry tub starting to weep? The Raymor Alpha Cross Handle Wall Top Assemblies in Chrome are the hot and cold wall taps on their own, no spout included, so they're the right pick when your existing spout is fine or you're buying one separately. They're a straightforward swap for older wall taps in a bathroom, kitchen or laundry. The rounded Alpha body and cross handles keep the traditional look. Inside you get jumper valves, so a drip means a new washer rather than a plumber's callout for a new set. Made from lead free brass with a chrome electroplated finish. Backed by a 15 year warranty on the body, spindles, flanges, handles and fittings, and 5 years on the finish. Also available in Black and Brushed Nickel.

• Hot and cold wall taps sold as a pair, with no spout, so you only buy what you need
• Jumper valve design for easy washer changes years down the track
• Cross handles with a classic look that are simple to turn
• Lead free brass construction for safer water and a long life
• Chrome electroplated finish that cleans up with a wipe
• Suits bathroom, kitchen and laundry walls, so one set covers most jobs around the house
• 15 year warranty on the body, spindles, flanges, handles and fittings, 5 years on the finish

Wall mounted, for 150 to 500kPa water pressure. Measure the spacing of your existing taps and ask your plumber if you're not sure they'll line up.

Add an Alpha spout, or match them with the Alpha basin set, showers and baths in the same finish.

Specifications

Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 15 years - ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings. 5 years - PVD and electroplate finishes. 1 year - Seals and labour

What's In The Box

• 1 x set hot and cold taps
• Fixing kit
• Installation instructions

Washing machine taps stiff, leaking or just tired? The Raymor Projix Washing Machine Stops in Chrome replace the wall-mounted hot and cold stops that feed most washing machines. The pin lever handles are quick to grab and give you a clean, modern look in the laundry, and they turn on ceramic disc spindles, so there's no washer to wear out and no slow drip a few years in. The body is lead free brass with a chrome electroplated finish that copes with a damp laundry. You're covered by a 15 year warranty on the body, spindles, flanges, handles and fittings, with 5 years on the finish. Also available in Black.

• Pair of hot and cold wall stops, so you replace the whole set in one go
• Ceramic disc spindles that turn a quarter turn and don't rely on a washer to seal
• Pin lever handles you can flick on and off with wet hands
• Lead free brass body for safer water and years of service
• Chrome electroplated finish that shrugs off splashes and detergent
• 15 year warranty on the body, spindles, flanges, handles and fittings, 5 years on the finish

Wall mounted, rated for 150 to 500kPa. Check your washing machine hoses will connect to the new stops, and ask your plumber if you're unsure.

Projix also does basin mixers, sink mixers, wall mixers and showers in the same finish if you want the whole house to match.

Specifications

Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 15 years - ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings. 5 years - PVD and electroplate finishes. 1 year - Seals and labour

What's In The Box

• 1 x set stop taps
• Fixing kit
• Installation instructions

Bath spout gone dull or dripping at the wall? The Raymor Edge II Bath or Basin Spout in Chrome is a wall mounted spout with the squared profile of the Edge II range, and it suits either a basin or a bath. It's made from lead free brass with a chrome electroplated finish, so it puts up with splashes and cleaning without losing its look. Fitted with a WELS 5 star aerator at 6.0 litres a minute for everyday use, and an open flow aerator comes in the box for filling the bath faster. Team it with an Edge II wall mixer and you have a matching set on the wall. Also available in Black and Brushed Nickel.

• Wall mounted spout that works over a basin or a bath, which keeps the look consistent through the bathroom
• Lead free brass body built for years of daily use
• Squared chrome electroplated finish that matches Edge II wall mixers and basin mixers
• WELS 5 star at 6.0 litres a minute to keep water use down at the basin
• Open flow aerator supplied, so you can fill the bath without the wait

Mounts to the wall over a basin or bath and runs on 150 to 500kPa water pressure. Check the reach suits your basin, and ask your plumber if you're unsure.

Edge II also does wall mixers, wall mixer sets, basin mixers, showers and accessories in Chrome.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43435
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Spout
• Fixing kit
• Installation instructions

Need to rinse the far side of the sink without a jug? The Raymor Edge II Sink Mixer with Detachable Veggie Spray in Chrome stands 519mm high with a 204mm reach, so even a stockpot slides under. The handpiece lifts off its hose to reach the corners of the sink or fill a bucket, and it switches between a single stream and a veggie spray for rinsing produce. The spout swivels. It's hob mounted through a single tap hole, so it replaces most kitchen mixers without new holes. Lead free brass body under a chrome electroplated finish, and a 35mm ceramic disc cartridge in a brass housing behind the paddle handle. The braided hoses, PERT lined, are attached out of the box. WELS 5 star at 6.0 litres a minute. Also available in Black.

• Detachable handpiece with single stream and veggie spray modes for rinsing greens or the sink
• Tall swivel spout, 519mm high with a 204mm reach, so big pots fit underneath
• Lead free brass construction with a chrome electroplated finish that lasts
• 35mm ceramic disc cartridge in a brass housing for reliable, smooth control
• Nylon braided hoses lined with PERT, fitted ready for your plumber
• WELS 5 star at 6.0 litres a minute, which keeps water use sensible
• Square Edge II styling that lines up with Edge II basin mixers and spouts

Hob mounted through one tap hole, for 150 to 500kPa water pressure. Check the 519mm height clears any window or overhead cupboard first.

Pair it with Edge II basin mixers, wall mixer sets, showers and accessories in Chrome.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43437
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Height to spout: 519mm
Spout reach: 204mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Sink Mixer
• Fixing kit
• Installation instructions

Kitchen mixer leaking and the cupboard under the sink getting damp? The Raymor Edge II Sink Mixer in Chrome is a fixed spout kitchen mixer with the square, clean-lined look of the Edge II range. The spout swivels and sits 263mm high with a 204mm reach, so it covers a double bowl sink and leaves room for the washing up. No pull-out hose means less to go wrong. It's hob mounted for a single tap hole, a like-for-like swap for most kitchens and laundries. The paddle handle works a 35mm ceramic disc cartridge in a brass housing, inside a lead free brass body with a chrome electroplated finish. PERT lined braided hoses are on it already. WELS 5 star rated at 6.0 litres a minute. Also available in Black.

• Swivel spout at 263mm high with a 204mm reach, which covers both bowls of a double sink
• Fixed spout with no hose, so there's less to wear out over the years
• Lead free brass body with a chrome electroplated finish that copes with kitchen grime
• 35mm ceramic disc cartridge in a brass housing for a smooth paddle handle
• Nylon braided hoses lined with PERT, attached and ready to go
• WELS 5 star at 6.0 litres a minute to keep the water bill down

Hob mounted through one tap hole, for 150 to 500kPa water pressure. Need more reach? Look at the Edge II Sink Mixer with Detachable Veggie Spray.

Match it with Edge II basin mixers, spouts and wall mixer sets in Chrome for the rest of the house.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43436
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Height to spout: 263mm
Spout reach: 204mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Sink Mixer
• Fixing kit
• Installation instructions

Vessel basin waiting on a tap that's tall enough? The Raymor Edge II Basin Tower Mixer in Chrome is the extended height version of the Edge II basin mixer, built for above-counter basins where the spout has to clear the rim of the bowl. Same squared styling, same paddle handle, just taller. It mounts through a single tap hole in the vanity top. The body is lead free brass under a chrome electroplated finish, and the handle runs a 35mm ceramic disc cartridge for years of smooth, drip-free use. Braided hoses lined with PERT are attached and ready for your plumber. It's WELS 5 star rated at 6.0 litres a minute. Also available in Black and Brushed Nickel.

• Taller tower body that clears the rim of a vessel basin sitting on the vanity
• Squared Edge II design with a paddle handle to match the rest of the range
• Lead free brass under a chrome electroplated finish, so it stays looking sharp
• 35mm ceramic disc cartridge that keeps the handle light and the spout drip-free
• PERT lined braided hoses fitted, saving time on the install
• WELS 5 star at 6.0 litres a minute for lower water use at the basin

Suits hob mounted vessel basins with one tap hole and 150 to 500kPa pressure. Check the height against your bowl before you buy, and ask your plumber if it's marginal.

Team it with Edge II bath or basin spouts, wall mixers, showers and accessories in Chrome.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43433
Construction material: Lead-Free Brass
Operating mechanism: Ceramic Disc
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Height to spout: 110mm
Spout reach: 120mm
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Basin Mixer
• Fixing kit
• Installation instructions

Bath and shower sharing one wall? The Raymor Alpha Bath/Shower Mixer with Diverter in Chrome lets one lever run both the bath spout and the shower, with a diverter to send water where you want it. The body is a one piece brass casting with four ports, so there are fewer joints to leak, and a 35mm ceramic disc cartridge under the paddle handle keeps control smooth. The handle is zinc die cast and everything visible is chrome plated. The wall plate measures 185mm by 65mm, which is handy for covering old tile cuts when you're replacing a set. Backed by a 20 year warranty on the body, cartridge, handle and chrome plated finish, with 1 year on seals and labour.

• Built-in diverter to switch between bath spout and shower head
• One piece brass body with four ports, which means fewer joins and less chance of a leak
• 35mm ceramic disc cartridge for smooth, reliable control
• Zinc die cast paddle handle that's easy to grip
• 185mm x 65mm wall plate that hides the hole from the old fitting
• Chrome plated finish to match Alpha spouts and showers
• 20 year warranty on the body, cartridge, spout, handle and chrome finish

Wall mounted. Ask your plumber to confirm the inwall connections before you buy, especially if you're switching from a three piece set.

Team it with an Alpha bath spout and shower, or the Alpha mixer without diverter for shower-only walls.

Specifications

Construction material: DZR Brass
Operating mechanism: Ceramic Disc
Overall height: 185 mm
Spout function: Fixed
Country of origin: China
Warranty: 20 Years mixer cartridge, mixer body, aerator, nylon braided TPSiV flexible hoses, spout, handle and chrome plated finish. 10 Years handpieces and pull down/out hoses, PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Bath/shower mixer with diverter
• Installation Instructions

Swapping a wall spout without redoing the tiles? The Raymor Winton Bath or Basin Spout in Chrome is a wall mounted spout with the same soft curves as the rest of the Winton range, and it works over either a basin or a bath. The body is lead free brass under a chrome electroplated finish, which is what you want in a fitting that gets wet and wiped down every day. It ships with a WELS 5 star aerator rated at 6.0 litres a minute for everyday use, and there's an open flow aerator in the box for when you'd rather fill the bath in a hurry. Also available in Black and Brushed Nickel.

• Wall mounted spout that suits a basin or a bath, so you can use the same fitting in both spots
• Lead free brass body for safer water and a long working life
• Durable chrome electroplated finish that holds up to splashes and regular cleaning
• WELS 5 star at 6.0 litres a minute, keeping water use down at the basin
• Optional open flow aerator supplied, which speeds up filling the bath
• Curved Winton styling that matches Winton wall mixer sets and basin mixers

Fixes to the wall over the basin or bath and runs on 150 to 500kPa water pressure. Check the reach against your basin before you buy, and ask your plumber if you're unsure.

Complete the look with Winton basin mixers, tower mixers and wall mixer sets in Chrome.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43431
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Spout
• Fixing kit
• Installation instructions

Got an above-counter basin that needs a taller tap? The Raymor Winton Basin Tower Mixer in Chrome is the tall version of the Winton basin mixer, made for vessel basins that sit on top of the vanity rather than in it. At 246mm high with a 150mm reach, the spout clears the rim of most bowls and lands the water where you want it. It's hob mounted through a single tap hole. The body is lead free brass with a chrome electroplated finish, a 25mm ceramic disc cartridge runs the paddle handle, and nylon braided hoses with a PERT lining come attached for your plumber. WELS 5 star rated at 6.0 litres a minute. Also available in Black and Brushed Nickel.

• Tall tower body made for above-counter basins, so the spout clears the bowl
• 246mm spout height and 150mm reach, which puts the flow into the centre of most vessel basins
• Lead free brass construction under a chrome electroplated finish that keeps its looks
• 25mm ceramic disc cartridge for a light paddle handle and no drips
• Nylon braided hoses lined with PERT, fitted and ready to connect
• WELS 5 star at 6.0 litres a minute, so you save water at the basin every day

Suits hob mounted vessel basins with one tap hole and 150 to 500kPa water pressure. Measure your basin height first, and ask your plumber if the spout clearance is tight.

The Winton range also covers standard basin mixers, bath or basin spouts and wall mixer sets in Chrome.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43429
Construction material: Lead-Free Brass
Operating mechanism: Ceramic Disc
Cartridge size: 25mm
Operating pressure: 150 to 500kPa
Height to spout: 246mm
Spout reach: 150mm
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Basin Mixer
• Fixing kit
• Installation instructions

Wall taps in the laundry stiff, dripping or just tired? The Raymor Atlanta Wall Top Assemblies in Chrome are the hot and cold wall taps only, with no spout, made to screw onto existing wall breeches in a laundry, kitchen or bathroom. Star handles give a firm grip, and the jumper valve design means a worn washer is a five minute fix. They're lead free brass with a chrome electroplated finish, in the classic Atlanta style. Backed by a 15 year warranty on the spindles, body, flanges, handles, fittings and chrome finish, with 1 year on seals and jumper valves. Pair them with an Atlanta gooseneck swivel spout to finish the job.

• Sold as a hot and cold pair of wall taps, no spout, for replacing worn wall tops
• Star handles that suit older homes and are easy to turn
• Lead free brass for safer water and a long life
• Jumper valve taps, so a drip is sorted with a new washer
• Chrome electroplated finish that cleans up easily
• 15 year warranty on the spindles, body, flanges, handles, fittings and chrome finish

Wall mounted, for 150 to 500kPa. Confirm your wall breech thread and spacing with your plumber before you order.

Add the Atlanta gooseneck swivel spout, or go for the Atlanta basin set and washing machine stops in Chrome.

Specifications

Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 15 years - ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings, and chrome finish. 5 years - PVD and electroplate finishes. 1 year - seals, jumper valves and labour.

What's In The Box

• 1 x set hot and cold taps
• Fixing kit
• Installation instructions

Wall spout over the laundry tub cracked or corroded? The Raymor Atlanta Gooseneck Swivel Spout in Chrome is a wall mounted spout for kitchens and laundries, made to partner Atlanta wall top assemblies. The tall gooseneck stands 245mm with a 165mm reach and swivels, so it clears buckets and reaches across a tub. It's lead free brass with a chrome electroplated finish, in the classic Atlanta style that suits older homes. WELS 5 star rated. Backed by a 15 year warranty on the body, spout, flanges, aerators, fittings and chrome finish. This is the spout only; the hot and cold taps are sold separately.

• Gooseneck spout at 245mm high with a 165mm reach that clears a bucket in the tub
• Swivel function, so you can push it aside when you need the space
• Lead free brass body for safer water and years of service
• Chrome electroplated finish in the classic Atlanta look
• WELS 5 star rated to keep water use down
• 15 year warranty on the body, spout, flanges, aerators, fittings and chrome finish

Wall mounted, for 150 to 500kPa water pressure. Spout only, so pair it with wall top assemblies and ask your plumber about the outlet height.

Complete the set with Atlanta wall top assemblies, the basin set and washing machine stops in Chrome.

Specifications

WELS water efficiency: 5 star
WELS registration number: T44421
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Height to spout: 245mm
Spout reach: 165mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 15 years - ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings, and chrome finish. 5 years - PVD and electroplate finishes. 1 year - seals, jumper valves and labour

What's In The Box

• 1 x Spout
• Fixing kit
• Installation instructions

Sharing one spout between two basins? The Raymor Sigma Basin or Bath Swivel Spout 220mm in Chrome is the moving version of the Sigma wall spout. The flat, soft square spout turns on its base, so you can push it aside to clean the basin or swing it between a bath and a basin that share a wall. It reaches 220mm from the wall. Lead free brass body with a chrome electroplated finish. The fitted aerator is WELS 5 star rated at 6.0 litres a minute, and an open flow aerator is included for filling a bath quickly. Backed by a 20 year warranty on the spout body and aerator. Also available in Black and Brushed Nickel.

• Swivel base that lets the spout turn, handy over a bath and basin combination
• 220mm reach that clears wide basins and bath rims
• Flat, soft square spout design that matches Sigma mixers
• Lead free brass body finished in chrome electroplate
• WELS 5 star 6.0 litres a minute aerator fitted, with an open flow aerator in the box for bath filling
• 20 year warranty on the spout and aerator, with 5 years on PVD and electroplated finishes

Wall mounted, for 150 to 500kPa water pressure. Ask your plumber to check the swing has clear room on both sides before it goes in.

If you don't need the swivel, the fixed Sigma spouts in 180mm and 220mm are the simpler option, and Sigma mixers complete the set.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: TBA
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Spout
• Fixing kit
• Installation instructions

Three-hole basin and the old set is dripping? The Raymor Armada Lever Handle Basin Set in Chrome is a three piece set for basins with three tap holes: a hot tap, a cold tap and a gooseneck spout, all hob mounted. It's the easy fix when you don't want to cut a new single-hole vanity top just to replace a tired set. The lever handles are simple to turn, and the raised gooseneck spout leaves room to fill a jug or wash your hands without knuckles hitting the basin. It's lead free brass with a chrome electroplated finish and rated WELS 5 star at 6.0 litres a minute, so the water bill stays sensible. Backed by a 15 year warranty on the body, spout, spindles, flanges, handles, aerator and fittings, 5 years on the finish and 1 year on seals and labour.

• Three piece set, hot, cold and gooseneck spout, made for basins with three tap holes
• Hob mounted, so it sits on the vanity top like the set it's replacing
• Gooseneck spout with a raised reach, which gives you clearance for washing hands and filling cups
• Lever handles that are easy to use for kids and older hands alike
• Lead free brass body under a chrome electroplated finish, built to last
• WELS 5 star at 6.0 litres a minute for lower water use without a weak stream
• 15 year warranty on the body, spout, spindles, flanges, handles, aerator and fittings, 5 years on the finish, 1 year on seals and labour

Suits hob-mounted basins with three tap holes. Check your hole spacing matches before you buy, and ask your plumber if you're unsure.

Armada also does wall top assemblies, basin top assemblies, showers and accessories in Chrome to match.

Specifications

WELS water efficiency: 5 star
WELS registration number: T47566
Lead free: Yes
Country of origin: China
Warranty: 15 years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings. 5 years PVD and electroplate finishes. 1 year Seals and labour.

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Wall taps over the laundry tub seized up? The Raymor Armada Lever Wall Top Assemblies in Chrome are the hot and cold wall taps only, with no spout, so you can replace the pair over a laundry tub, kitchen sink or bath and keep your existing outlet. The lever handles are easy to grip with wet or soapy hands and give the classic Armada look a modern edge. They're made from lead free brass with a chrome electroplated finish that handles steam and cleaning products. Backed by a 15 year warranty on the body, spindles, flanges, handles and fittings, with 5 years on the electroplated finish and 1 year on seals and labour. Pair them with an Armada spout and accessories to finish the room.

• Sold as a hot and cold pair, which swaps straight in for worn wall taps
• Lever handles that turn easily, even with wet hands or a weak grip
• Lead free brass body for safer water and a long service life
• Chrome electroplated finish that wipes clean and suits kitchen, laundry or bathroom
• No spout included, so you keep the outlet you already have or pick an Armada spout to match
• 15 year warranty on the body, spindles, flanges, handles and fittings, 5 years on the finish, 1 year on seals and labour

Wall mounted, for two wall breeches at standard spacing. Ask your plumber to confirm your breech spacing before you buy.

Match them with Armada spouts, basin sets, showers and accessories in Chrome.

Specifications

Lead free: Yes
Country of origin: China
Warranty: 15 years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings. 5 years PVD and electroplate finishes. 1 year Seals and labour.

What's In The Box

• 1 x set hot and cold taps
• Fixing kit
• Installation instructions

Basin with three holes and a set of taps that's had it? The Raymor Atlanta Basin Set in Chrome is a three piece set: separate hot and cold taps with star handles and a gooseneck spout, made for basins with three tap holes. It's the classic look that suits period homes, but built for today. The taps and spout are lead free brass with a chrome electroplated finish, and the jumper valve design means a drip is fixed with a new washer rather than a new tap. The spout sits 165mm high with a 124mm reach. WELS 5 star at 6.0 litres a minute. Backed by a 15 year warranty on the body, spout, handles, flanges, aerators, fittings and chrome finish.

• Three piece set, so it fits basins with three tap holes straight away
• Star handles that are easy to grip and match older bathrooms
• Lead free brass throughout for safer water and long life
• Jumper valve taps, which means a low cost washer fixes a drip down the track
• Gooseneck spout at 165mm high with a 124mm reach
• WELS 5 star at 6.0 litres a minute to keep water use sensible
• 15 year warranty on the body, spout, flanges, handles, aerators, fittings and chrome finish

Hob mounted, three tap holes, 150 to 500kPa. Measure your hole centres and ask your plumber if you're unsure.

Atlanta also does wall top assemblies, a gooseneck swivel spout and washing machine stops in Chrome.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T44422
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Height to spout: 165mm
Spout reach: 124mm
Lead free: Yes
Country of origin: China
Warranty: 15 years - ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings, and chrome finish. 5 years - PVD and electroplate finishes. 1 year - seals, jumper valves and labor

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Shower and bath sharing one wall mixer? The Raymor Surrey Bath and Shower Mixer with Diverter in Chrome runs two outlets from a single wall mixer, so you switch between the shower head and the bath spout with a flick of the diverter. The traditional styling suits a period home or a simple new bathroom. It's built from DZR brass in a one piece body with a 35mm ceramic disc cartridge in a brass housing behind a paddle handle. Should the cartridge ever give out, the mixer is designed so water shows at the front of the wall instead of soaking the cavity. The trim includes a removable sleeve, which means parts can be replaced without breaking the wet seal. Backed by a 20 year warranty on the body, cartridge, handle and chrome finish.

• Built-in diverter that sends water to the shower or the bath spout from one mixer
• One piece DZR brass body with a flat mount and four fixing points, so it sits solid in the wall
• 35mm ceramic disc cartridge inside a brass housing, giving the paddle handle a smooth, long lasting action
• Any cartridge leak is directed to the front of the wall, not into the cavity, which saves a costly repair later
• Removable body sleeve on the trim for replacing parts without touching the waterproofing
• Chrome finish that cleans up with a wipe and matches the rest of the Surrey range
• 20 year warranty on the body, cartridge, handle and chrome finish, with 1 year on seals and labour

Wall mounted, suited to water pressure from 150 to 500kPa. Your plumber will need to run a second outlet for the bath spout, so check the wall layout before you order.

Finish the room with a Surrey wall spout and shower, or the single outlet Surrey Bath or Shower Mixer for a second bathroom.

Specifications

Construction material: DZR Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Lead free: Not Required
Country of origin: China
Warranty: 20 Years Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 Years Handpieces and pull down hoses. 5 Years PVD and Electroplate finishes. 1 Years Seals and Labour

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Basin taps stiff, dripping or just dated? The Raymor Armada Lever Basin Top Assemblies in Chrome are a hob-mounted hot and cold tap pair, with no spout, for a basin, sink or tub that has separate tap holes. They suit a job where the existing spout is fine and only the taps need replacing, or where you're pairing them with a new Armada spout. Lever handles make them easy to turn with soapy hands, and the body is lead free brass with a chrome electroplated finish that copes with daily cleaning. Fine for bathroom, kitchen or laundry. Backed by a 15 year warranty on the body, spindles, flanges, handles and fittings, with 5 years on the electroplated finish and 1 year on seals and labour.

• Hot and cold taps only, which suits a swap where the spout stays in place
• Hob mounted, sitting on the benchtop or basin rather than the wall
• Lever handles for an easy turn, handy for kids and anyone with a weaker grip
• Lead free brass construction for safer drinking water and long life
• Chrome electroplated finish that resists tarnish and wipes clean
• Suits bathroom, kitchen and laundry, so one style can run through the house
• 15 year warranty on the body, spindles, flanges, handles and fittings, 5 years on the finish, 1 year on seals and labour

Hob mounted, for two tap holes at standard spacing. Measure your hole centres before you buy, and ask your plumber if anything looks unusual.

Add an Armada spout, or go the full Armada basin set, wall top assemblies and accessories in Chrome.

Specifications

Lead free: Yes
Country of origin: China
Warranty: 15 years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings. 5 years PVD and electroplate finishes. 1 year Seals and labour.

What's In The Box

• 1 x set hot and cold taps
• Fixing kit
• Installation instructions

Want the reach of a pull-out with a cleaner look on the bench? The Raymor Sigma Sink Mixer with Detachable Hose in Chrome has a tall, soft square spout at 453mm high with a 220mm reach, and the handpiece lifts off on its hose so you can rinse right into the corners of the sink or fill a bucket on the floor. It swivels too. It's hob mounted for a single tap hole, so it goes in where your current mixer sits. Lead free brass body, chrome electroplated finish, and a 35mm ceramic disc cartridge in a brass housing behind the paddle handle. Braided hoses with a PERT lining are fitted. WELS 5 star at 6.0 litres a minute. Backed by a 20 year warranty on the body and cartridge, 10 years on the handpiece and hose. Also available in Black and Brushed Nickel.

• Detachable handpiece on a hose for reaching the corners of the sink or filling a mop bucket
• Tall swivel spout at 453mm with a 220mm reach, so stockpots and vases fit with ease
• Soft square Sigma styling that pairs with Sigma tapware, showers, basins and baths
• Lead free brass body with a chrome electroplated finish built for the kitchen
• 35mm ceramic disc cartridge in a brass housing, which keeps the paddle handle smooth for years
• WELS 5 star at 6.0 litres a minute for lower water use without a feeble flow
• 20 year warranty on the body, cartridge, aerator, hoses, spout and handle, 10 years on the handpiece and hose, 5 years on Black and Brushed Nickel finishes and 20 years on the Chrome finish, 1 year on seals and labour

Hob mounted through one tap hole, for 150 to 500kPa water pressure. Check the height clears any overhead cupboard or window sill, and ask your plumber if you're unsure.

The Sigma range also covers tapware, showers, basins and baths in Chrome.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43338
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Height to spout: 453mm
Spout reach: 220mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 Years Mixer Cartridge, Body, Aerator,. Hoses, Spout, Handle and Chrome Finish. 10 Years Handpieces and pull down hoses. 5 Years PVD and Electroplate finishes. 1 Years Seals and Labour

What's In The Box

• 1 x Sink Mixer
• Fixing kit
• Installation instructions

Old style kitchen with a sink mixer that's had it? The Raymor Atlanta Sink Mixer in Chrome is a gooseneck kitchen mixer with a pin lever handle, in the traditional Atlanta style that suits older homes and country kitchens. The spout swivels and stands 363mm high with a 183mm reach, so there's room to fill a stockpot or rinse a roasting tray. It's hob mounted through one tap hole, a straightforward replacement for most sinks. The body is lead free brass under a chrome electroplated finish, with a 35mm ceramic disc cartridge sitting in a brass housing for a long, drip-free life. Braided flexible hoses with a PERT lining are fitted. WELS 5 star rated at 6.0 litres a minute. Also available in Black and Brushed Nickel.

• Gooseneck swivel spout, 363mm high with a 183mm reach, which fits big pots and pans underneath
• Pin lever handle in the classic Atlanta look that's easy to use with wet or soapy hands
• Lead free brass body for safer water and years of service
• Hard-wearing chrome electroplated finish that wipes clean
• 35mm ceramic disc cartridge in a brass housing, so the handle stays smooth and drips stay away
• Nylon braided hoses lined with PERT, already attached for a faster install
• WELS 5 star at 6.0 litres a minute to trim water use at the sink

Suits hob mounted sinks with a single tap hole and 150 to 500kPa water pressure. Not a pull-out, so measure the reach against your sink before ordering.

Match it with Atlanta basin sets, spouts, washing machine stops and wall top assemblies in Chrome.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43704
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Height to spout: 363mm
Spout reach: 183mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Sink Mixer
• Fixing kit
• Installation instructions

Basin tap too low to get your hands under? The Raymor Projix Gooseneck Swivel Hob Mixer Set 200mm in Chrome gives you a tall gooseneck spout that swivels, with about 200mm of reach and 207mm of height, so there's room to rinse a razor or fill a jug. It mounts on the hob and suits bathroom basins. The body is lead free brass with a chrome electroplated finish, and a 35mm ceramic disc cartridge behind the pin lever handle keeps the action smooth. WELS 6 star at 4.5 litres a minute as fitted, with a 5 star 6.0 litre aerator in the box if you want more flow. Poly braided hoses with a PE-RT liner are supplied for your plumber. Backed by a 20 year warranty on the body, cartridge, spout and handle. Also available in Black and Brushed Nickel.

• Gooseneck spout with 200mm reach and 207mm height, which leaves room for washing hands and filling jugs
• Swivel spout so you can push it aside when cleaning the basin
• Lead free brass body for safer water and a longer working life
• Chrome electroplated finish that wipes clean and handles daily use
• 35mm ceramic disc cartridge under a pin lever handle for smooth, drip-free control
• WELS 6 star 4.5 litre a minute aerator fitted, with a 5 star 6.0 litre option in the pack
• 20 year warranty on the body, cartridge, aerator, hoses, spout, handle and chrome finish, 5 years on other electroplated finishes

Hob mounted, so check your basin's tap holes and that your pressure sits between 150 and 500kPa. Ask your plumber if you're not sure.

Pair it with Projix wall mixers, spouts and showers in the same finish.

Specifications

WELS water efficiency: 6 star
WELS water consumption: 4.5 L/Min
WELS registration number: T46176
Construction material: Lead-Free Brass
Operating mechanism: 35m Ceramic disc
Operating pressure: 150 to 500kPa
Height to spout: 207mm
Spout reach: 202mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x hob mounted mixer
• Fixing kit
• Installation instructions

Need room under the spout to fill a bucket or wash a baby bath? The Raymor Projix Gooseneck Swivel Basin or Bath Spout in Chrome rises up and over in a high arc, giving you more room under the outlet than a standard spout. It swivels too, so you can turn it aside over the bath or line it up over a basin. The body is lead free brass with an electroplated finish. It's fitted with a WELS 6 star 4.5 litre a minute aerator, comes with a 5 star 6.0 litre aerator for more flow, and includes an open flow aerator for bath filling. Covered by a 20 year warranty on the spout and body, with 20 years on chrome and 5 years on other electroplated finishes. Also available in Black and Brushed Nickel.

• Gooseneck arc that leaves plenty of clearance under the outlet
• Swivel function so the spout turns to where you need it
• Lead free brass body for safe drinking water at the basin
• Chrome electroplated finish that wipes clean and keeps its look
• WELS 6 star 4.5 litre a minute aerator fitted, with a 5 star 6.0 litre aerator included
• Open flow aerator in the box for a quick bath fill
• 20 year warranty on the spout and body, 20 years on chrome and 5 years on other finishes

Wall mounted, for 150 to 500kPa water pressure. Check the height of the outlet above your basin or bath so it doesn't splash, or ask your plumber.

Matches the Projix Flip wall mixer and swivel basin mixers; the fixed straight and curved spouts are there if you don't need the arc.

Specifications

WELS water efficiency: 6 star
WELS water consumption: 4.5 L/Min
WELS registration number: T46233
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Spout reach: 240mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Spout
• Fixing kit
• Installation instructions

Deep bath and a spout that stops short? The Raymor Projix Straight Basin or Bath Spout 220mm in Chrome is the long reach version of the straight Projix spout. The extra 40mm over the 180mm model gets the water further into a wide bath or a basin set off the wall. It's a fixed, wall mounted spout in lead free brass with an electroplated finish. For water use it's WELS 6 star at 4.5 litres a minute with the fitted aerator, and a 5 star 6.0 litre aerator comes in the box for more flow at the basin. Over a bath, fit the included open flow aerator and it fills without the wait. The spout and body carry a 20 year warranty, with 20 years on chrome and 5 years on other finishes. Also available in Black and Brushed Nickel.

• 220mm reach that suits wider baths and basins set back from the wall
• Straight fixed outlet with no moving parts to loosen over time
• Lead free brass construction for safer drinking water
• Chrome electroplated finish to match the rest of the Projix range
• Fitted WELS 6 star 4.5 litre a minute aerator, plus a 5 star 6.0 litre aerator in the box
• Open flow aerator included for fast bath filling
• 20 year warranty on the spout and body, with 20 years on chrome and 5 years on other finishes

Wall mounted for 150 to 500kPa pressure. Measure from the finished wall to the centre of your bath or basin to pick between 180mm and 220mm, or ask your plumber.

Goes with the Projix Flip wall mixer, straight tower mixer and the 180mm straight spout for smaller basins.

Specifications

WELS water efficiency: 6 star
WELS water consumption: 4.5 L/Min
WELS registration number: T46235
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Spout reach: 220mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Spout
• Fixing kit
• Installation instructions

Shower mixer stiff, leaking or just plain ugly? The Raymor Projix Flip Wall Mixer in Chrome is a single lever wall mixer for showers and baths. It's an in-wall unit, so it suits a new bathroom or a retile where your plumber is getting behind the tiles anyway. The in-wall body is lead free, and the pin lever handle wears an electroplated finish that matches the rest of the Projix range. One lever sets both flow and temperature, which is easier than juggling two taps. Rated for 150 to 500kPa water pressure. Covered by a 20 year warranty on the mixer cartridge, body and handle, with 20 years on chrome and 5 years on other electroplated finishes, and 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Single pin lever that sets flow and temperature in one movement
• Lead free in-wall body, so the part that's plumbed in is built to last
• Chrome electroplated finish on the visible parts to match Projix spouts and basin mixers
• Wall mounted, for use with a shower, a bath spout or both
• Works between 150 and 500kPa, which covers most Australian mains pressure
• 20 year warranty on the cartridge, body and handle, 20 years on chrome and 5 years on other electroplated finishes

This is an in-wall mixer, so it's a job for your plumber, ideally while the wall is open. Check your pressure sits between 150 and 500kPa.

Pair it with a Projix basin or bath spout and basin mixers in the same finish.

Specifications

Construction material: Lead free inwall body
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Need height over a bowl basin without a hard edge? The Raymor Projix Curved Basin Mixer Tower in Chrome pairs a gently curved spout with a tall body, built for vessel basins that sit on the benchtop. At 209mm high with a 159mm reach it clears most bowl rims comfortably. Underneath it's lead free brass with an electroplated finish, and the pin lever handle turns on a 35mm ceramic disc cartridge. The fitted aerator is WELS 6 star at 4.5 litres a minute; a 5 star 6.0 litre aerator is in the box if you prefer a stronger stream. PE-RT lined hoses are attached. It carries 20 years on the body, cartridge, aerator, hoses, spout and handle, with 20 years on chrome and 5 years on other finishes. Also available in Black and Brushed Nickel.

• 209mm tall body made for above-counter and vessel basins
• Curved fixed spout reaching 159mm, which puts the flow into the bowl not on the edge
• Lead free brass body for safer water at the basin
• Chrome electroplated finish that holds up to everyday use and cleaning
• 35mm ceramic disc cartridge behind a pin lever handle for easy, smooth control
• WELS 6 star 4.5 litre a minute as fitted, with a 5 star 6.0 litre aerator included
• 20 year warranty on the body, cartridge, aerator, hoses, spout and handle, plus 20 years on chrome and 5 years on other finishes

Single tap hole, hob mounted, for 150 to 500kPa pressure. Check the rim height of your basin before ordering, or run it past your plumber.

Also in the range: straight and angled swivel tower mixers, plus a standard height curved basin mixer for inset basins.

Specifications

WELS water efficiency: 6 star
WELS water consumption: 4.5 L/Min
WELS registration number: T46245
Construction material: Lead-Free Brass
Operating mechanism: 35m Ceramic disc
Operating pressure: 150 to 500kPa
Height to spout: 209mm
Spout reach: 159mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Basin Mixer
• Fixing kit
• Installation instructions

Tall basin, and you want the spout to move? The Raymor Projix Angled Swivel Basin Mixer Tower in Chrome is a tall mixer for above-counter basins, with an angled spout that swivels so you can push it clear when wiping down the bowl. It stands 228mm high and the spout reaches 149mm, which suits most vessel basins on a standard vanity. It's lead free brass with an electroplated finish, a pin lever handle and a 35mm ceramic disc cartridge inside. Flow is WELS 6 star at 4.5 litres a minute as supplied, and a 5 star 6.0 litre aerator is included. PE-RT lined hoses are fitted. Warranty runs 20 years on the body, cartridge, aerator, hoses, spout and handle, with 20 years on chrome and 5 years on other finishes. Also available in Black and Brushed Nickel.

• 228mm tall, sized for vessel basins that sit on top of the vanity
• Angled swivel spout with a 149mm reach, so it turns out of the way for cleaning
• Lead free brass body that keeps your drinking water safe
• Chrome electroplated finish that resists marks and wipes clean
• Pin lever handle with a 35mm ceramic disc cartridge for a smooth feel and no drips
• WELS 6 star at 4.5 litres a minute, with a 5 star 6.0 litre aerator supplied for a fuller flow
• 20 year warranty on body, cartridge, aerator, hoses, spout and handle; 20 years on chrome, 5 years on other finishes

Hob mounted through one tap hole and rated for 150 to 500kPa. Check the height of your basin rim against the spout, or ask your plumber.

See the straight and curved Projix tower mixers, or the standard height angled swivel basin mixer for inset basins.

Specifications

WELS water efficiency: 6 star
WELS water consumption: 4.5 L/Min
WELS registration number: T46185
Construction material: Lead-Free Brass
Operating mechanism: 35m Ceramic disc
Operating pressure: 150 to 500kPa
Height to spout: 228mm
Spout reach: 149mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Basin Mixer
• Fixing kit
• Installation instructions

Big pots and a tall tap to fill them? The Raymor Madison Sink Mixer in Chrome is a tall gooseneck mixer with a pull out handpiece, so you get height for stockpots and reach for rinsing the whole sink. The spout stands 236mm high with a 231mm reach and swivels. A pin lever handle controls a 35mm ceramic disc cartridge in a brass housing, and the body is lead free brass under an electroplated finish. Poly braided hoses with a PE-RT liner and a quick fit hose connection make the install easy for your plumber. WELS 5 star at 6.0 litres a minute, with backflow prevention built in. Backed by a 20 year warranty on the body and cartridge, and 10 years on the handpiece and pull out hose. Also available in Black and Brushed Nickel.

• Tall gooseneck spout, 236mm high and 231mm reach, which fits a stockpot underneath
• Pull out handpiece on a hose for washing down every corner of the sink
• Lead free brass body with a chrome electroplated finish that suits modern kitchens
• 35mm ceramic disc cartridge in a brass housing behind a pin lever handle
• Poly braided PE-RT lined hoses and a quick fit connection for a faster install
• WELS 5 star at 6.0 litres a minute, with backflow prevention built in
• 20 year warranty on the body, cartridge, aerator, hoses, spout and handle, 10 years on the handpiece and pull out hose

Hob mounted through one tap hole, for 150 to 500kPa. Check you have clearance under the bench for the hose before you buy.

Match it with Raymor basin mixers and spouts in the same finish for the bathroom.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T44965
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Height to spout: 236mm
Spout reach: 231mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 Years Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 Years Handpieces and pull down hoses. 5 Years PVD and Electroplate finishes. 1 Years Seals and Labour.

What's In The Box

• 1 x Sink Mixer
• Fixing kit
• Installation instructions