All Products

Ready to swap the old suite for something easier to keep clean? The Raymor Winton Back to Wall Rimless Toilet Suite with a slim seat has a rimless pan with an easy clean rim and no gap behind it. Vitreous china pan and cistern, 830mm high, 365mm wide and 615mm deep. The universal trap suits a P trap at 185mm, or an S trap from 50mm to 160mm as standard and 150mm to 245mm with the optional set out. Inlet is back or bottom, left or right, through an R&T side entry valve. The R&T 4.5 and 3 litre dual flush gives it WELS 4 star at 3.5 litres a flush. Made in China. In the box: cistern, pan with slim soft close quick release seat, variance bend and instructions. Warranty is 20 years on the china, 5 years on valves, seat and fittings, 1 year on seals and labour.

• Rimless pan with an easy clean rim, so there are fewer places for grime to build up
• Back to wall suite, which means no gap behind the pan to clean around
• Universal trap covers P trap at 185mm and S trap from 50mm to 245mm with the optional set out, so it suits most existing outlets
• Back or bottom inlet, left or right, so your plumber connects to what is already in the wall or floor
• R&T side entry inlet valve and 4.5 and 3 litre dual flush outlet valve, WELS 4 star at 3.5 litres average flush
• Slim soft close seat with quick release metal hinges, so it sits low on the pan and lifts off for cleaning
• 20 years on the vitreous china, 5 years on valves, seat and fittings, 1 year on seals and labour

Measure from the finished wall to the centre of your outlet and check whether your inlet is in the wall or the floor. Ask your plumber if you're unsure.

Pair it with a Raymor Winton basin mixer and Winton accessories to finish the room.

Specifications

Construction material: Vitreous china
Colour: White
Pan type: Rimless
Flush type: Dual Flush
Outlet valve: 4.5/3L Dual flush
Trap type: Universal
Set out: S Trap(mm): 50-160 Standard; P Trap(mm): 185 Floor to Centre of Outlet; Optional S Trap(mm): 150-245
Water inlet: Universal
Seat type: Soft Close Double Flap
Overall height: 830 mm
Overall width: 365 mm
Overall depth: 615 mm
WELS rating: 4 star, 3.5L average flush
WELS registration: L07687
Country of origin: China
Warranty: 20 years Vitreous china. 15 years Nylon Braided TPSiv Flexible Hoses. 10 years In Wall cisterns. 5 years inlet and outlet valves, seats, link piece, flush pipe, flush button, fittings. 1 year seals and labour

What's In The Box

• 1 x Pan with seat
• 1 x Cistern
• 1 x Variance Bend
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want a toilet that's easier to get up from? The Raymor Edge II Back to Wall Comfort Height Rimless Toilet Suite with a standard seat has a taller pan that is easier to sit on and stand up from. Vitreous china pan and cistern, 840mm high, 370mm wide and 700mm deep, with a slim cistern lid. The universal trap suits a P trap at 185mm, or an S trap from 65mm to 175mm as standard and 95mm to 220mm with the optional set out. The WDI universal inlet valve adjusts for bottom right or rear left entry. Dual flush at 4.5 and 3 litres, WELS 4 star at 3.5 litres a flush. In the box: pan, cistern with slim lid, standard soft close seat and instructions. Warranty is 20 years on the china, 5 years on valves, seat and fittings, 1 year on seals and labour.

• Comfort height pan, so it's easier on knees and hips getting up and down
• Universal trap suits P trap at 185mm and S trap from 65mm to 220mm with the optional set out, which covers most existing plumbing
• Back to wall suite, so there is nothing to mop around behind the pan
• Rimless pan for fewer places dirt can settle and a quicker wipe down
• WDI universal inlet valve for bottom right or rear left entry, so your plumber uses the existing supply
• 48mm round chrome dual flush button with a WDI 4.5 and 3 litre dual flush valve, WELS 4 star at 3.5 litres average flush
• 20 years on the vitreous china, 5 years on valves, seat and fittings, 1 year on seals and labour

Measure wall to outlet centre and check whether your inlet is in the wall or the floor before ordering. Ask your plumber if you're not sure.

Match it with a Raymor Edge II basin mixer and Edge II accessories from the same range.

Specifications

Construction material: Vitreous china
Colour: White
Pan type: Rimless
Flush type: Dual Flush
Outlet valve: WDI 4.5/3L Dual flush
Trap type: Universal
Set out: S-Trap Set Out: 65-175mm as standard. P-Trap Set Out: 185mm. Optional S-Trap Set Out: 95-220mm
Water inlet: Universal
Seat type: Soft Close Double Flap
Overall height: 840 mm
Overall width: 370 mm
Overall depth: 700 mm
WELS rating: 4 star, 3.5L average flush
WELS registration: L08138
Warranty: 20 years Vitreous china. 15 years Nylon Braided TPSiv Flexible Hoses. 10 years In Wall cisterns. 5 years inlet and outlet valves, seats, link piece, flush pipe, flush button, fittings. 1 year seals. and labour

What's In The Box

• 1 x Edge back to wall comfort height rimless pan
• 1 x Edge back to wall comfort height cistern with slim lid
• 1 x Standard soft close seat
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Finding the old toilet a bit low to get up from? The Raymor Winton Back to Wall Comfort Height Rimless Toilet Suite with a slim seat has a taller 455mm pan that is easier to sit on and stand up from. It's a back to wall suite with a vitreous china pan and cistern, 880mm high, 375mm wide and 620mm deep. The universal trap takes a P trap at 185mm or an S trap from 75mm to 170mm as standard, and 150mm to 230mm with the optional set out. Inlet is back or bottom, left or right. Rimless pan and 4.5 and 3 litre dual flush, WELS 4 star at 3.5 litres a flush. In the box: cistern, pan with soft close quick release seat, variance bend and instructions. Warranty is 20 years on the china, 5 years on valves, seat and fittings, 1 year on seals and labour.

• Comfort height pan at 455mm, so it's easier on knees and hips getting up and down
• Back to wall suite, which means no gap behind the pan collecting dust
• Rimless pan with an easy clean rim for a quick wipe and less scrubbing
• Universal trap covers P trap at 185mm and S trap from 75mm to 230mm with the optional set out, so it suits most existing plumbing
• Back or bottom inlet on either side, so your plumber connects to whatever is already there
• R&T side entry inlet valve and 4.5 and 3 litre dual flush outlet valve, WELS 4 star at 3.5 litres average flush
• 20 years on the vitreous china, 5 years on valves, seat and fittings, 1 year on seals and labour

Measure wall to outlet centre and check where your water inlet is before ordering. Ask your plumber if you're unsure.

Match it with a Raymor Winton basin mixer and Winton accessories for the rest of the room.

Specifications

Construction material: Vitreous china
Colour: White
Pan type: Rimless
Flush type: Dual Flush
Outlet valve: 4.5/3L Dual flush
Trap type: Universal
Set out: P Trap set out 185mm S Trap set out 75mm-170mm as standard Optional S Trap set out 150mm - 230mm
Water inlet: Universal
Seat type: Soft Close Double Flap
Overall height: 880 mm
Overall width: 375 mm
Overall depth: 620 mm
WELS rating: 4 star, 3.5L average flush
WELS registration: L07688
Country of origin: China
Warranty: 20 years Vitreous china. 15 years Nylon Braided TPSiv Flexible Hoses. 10 years In Wall cisterns. 5 years inlet and outlet valves, seats, link piece, flush pipe, flush button, fittings. 1 year seals and labour

What's In The Box

• 1 x Pan with Seat
• 1 x Cistern
• 1 x Variance Bend
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

After a taller pan with a lower profile seat? The Raymor Edge II Back to Wall Comfort Height Rimless Toilet Suite with a slim seat gives you both. The comfort height pan is easier to sit on and stand up from. Vitreous china pan and cistern, 840mm high, 370mm wide and 700mm deep, with a slim cistern lid. The universal trap takes a P trap at 185mm, or an S trap from 65mm to 175mm as standard and 95mm to 220mm with the optional set out. The WDI universal inlet valve adjusts for bottom right or rear left entry. Dual flush at 4.5 and 3 litres, WELS 4 star at 3.5 litres a flush. In the box: pan, cistern with slim lid, slim soft close seat and instructions. Warranty is 20 years on the china, 5 years on valves, seat and fittings, 1 year on seals and labour.

• Comfort height pan that is taller than standard, so sitting and standing takes less effort
• Slim soft close seat with quick release metal hinges, which keeps the profile low and lifts off for cleaning
• Universal trap covers P trap at 185mm and S trap from 65mm to 220mm with the optional set out, so it fits most existing outlets
• Back to wall suite, which means no gap behind the pan collecting dust
• Rimless pan, so grime has nowhere to hide under a rim
• WDI universal inlet valve for bottom right or rear left entry, so your plumber connects to what's already there
• 48mm round chrome dual flush button with a WDI 4.5 and 3 litre dual flush valve, WELS 4 star at 3.5 litres average flush

Check your set out from the finished wall to the outlet centre and your inlet position before you order. Ask your plumber if you're unsure.

Finish the room with a Raymor Edge II basin mixer and Edge II shower from the same range.

Specifications

Construction material: Vitreous china
Colour: White
Pan type: Rimless
Flush type: Dual Flush
Outlet valve: WDI 4.5/3L Dual flush
Trap type: Universal
Set out: S-Trap Set Out: 65-175mm as standard. P-Trap Set Out: 185mm. Optional S-Trap Set Out: 95-220mm
Water inlet: Universal
Seat type: Soft Close Double Flap
Overall height: 840 mm
Overall width: 370 mm
Overall depth: 700 mm
WELS rating: 4 star, 3.5L average flush
WELS registration: L08138
Warranty: 20 years Vitreous china. 15 years Nylon Braided TPSiv Flexible Hoses. 10 years In Wall cisterns. 5 years inlet and outlet valves, seats, link piece, flush pipe, flush button, fittings. 1 year seals and labour

What's In The Box

• 1 x Edge back to wall comfort height rimless pan
• 1 x Edge back to wall comfort height cistern with slim lid
• 1 x Slim soft close seat
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Doing up a second bathroom or a rental without overthinking it? The Raymor Edge II Back to Wall Rimless Toilet Suite with a standard seat is a no fuss swap for most existing suites. Vitreous china pan and cistern, 795mm high, 360mm wide and 700mm deep, with a slim cistern lid. The universal trap connects as a P trap at 185mm or an S trap from 65mm to 175mm as standard. The WDI universal inlet valve lets your plumber connect from the back or the bottom. A WDI 4.5 and 3 litre dual flush outlet valve gives it WELS 4 star at 3.5 litres a flush. Made in China. In the box: pan, cistern with slim lid, standard soft close seat, variance bend and instructions. Warranty is 20 years on the china, 5 years on valves, seat and fittings, 1 year on seals and labour.

• Universal trap covers P trap at 185mm and S trap from 65mm to 175mm as standard, which suits most existing plumbing
• Variance bend included, so your plumber has what's needed for the S trap connection
• Back to wall suite, which leaves nothing to mop around behind the pan
• Rimless pan, so there is no rim for grime to hide under
• WDI universal inlet valve for back or bottom entry, so it connects to the supply already there
• White soft close standard seat with quick release metal hinges, so it comes off for a proper clean
• 20 years on the vitreous china, 5 years on valves, seat and fittings, 1 year on seals and labour

Measure wall to outlet centre and check your inlet position before you order. Ask your plumber if you're not sure.

Match it with a Raymor Edge II basin mixer and Edge II shower for the rest of the room.

Specifications

Construction material: Vitreous china
Colour: White
Pan type: Rimless
Flush type: Dual Flush
Outlet valve: WDI 4.5/3L Dual flush
Trap type: Universal
Set out: S Trap Set Out 65mm - 175mm as Standard, P-Trap floor to Centre of Outlet 185mm
Water inlet: Universal
Seat type: Soft Close Double Flap
Overall height: 795 mm
Overall width: 360 mm
Overall depth: 700 mm
WELS rating: 4 star, 3.5L average flush
WELS registration: L08237
Country of origin: China
Warranty: 20 years Vitreous china. 15 years Nylon Braided TPSiv Flexible Hoses. 10 years In Wall cisterns. 5 years inlet and outlet valves, seats, link piece, flush pipe, flush button, fittings. 1 year seals and labour

What's In The Box

• 1 x Back to wall rimless pan
• 1 x Cistern with slim lid
• 1 x Standard soft close seat
• 1 x Variance bend
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Old inset basin chipped or yellowed? The Raymor Edge II Inset Basin 400mm x 400mm in White drops into a cut-out with the rim resting on the bench, so it's the usual pick for replacing a basin in a laminate or stone vanity top. Made from white vitreous china with the straight, angled profile of the Edge II range, it measures 163mm deep. There's one taphole for a basin mixer, and an overflow with a chrome ring stops an overfilled bowl spilling onto the floor. The basin arrives with a pop-up plug and waste, the chrome overflow ring and installation instructions. Backed by a 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, and 1 year on seals and labour.

• Inset design that drops into a cut-out with the rim on the bench, so it suits most existing vanity tops
• 400mm x 400mm square footprint, which fits a standard depth vanity with room for a mixer behind
• White vitreous china that resists stains and scratches from daily use
• 1 taphole, so your basin mixer mounts straight onto the basin
• Overflow with chrome ring, which drains the bowl if someone leaves the tap running
• 7.59L bowl capacity, plenty for washing up without splashing
• Pop-up plug and waste and instructions included, backed by a 20 year warranty on the china

Measure your existing cut-out before ordering, as a new basin may need the hole trimmed or a new top. Ask your plumber or joiner if you're unsure.

Team it with a Raymor basin mixer, or choose the Edge II counter top basin if your bench has no cut-out.

Specifications

Construction material: Vitreous China
Colour: White
Tap holes: One taphole, suits a basin mixer
Overflow: Overflow included
Plug and waste: Included
Bowl capacity: 7.59L
Length: 400mm
Width: 400mm
Height: 163 mm
Shape: Rectangle
Country of origin: China
Warranty: 20 years vitreous china. 5 years plug and waste, overflow ring, chrome, PVD and electroplate finishes and fittings. 1 year seals and labour

What's In The Box

• 1 x Inset Basin
• 1 x Pop-up plug and waste
• 1 x Chrome overflow ring
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

After a big bowl for a busy family bathroom? The Raymor Alpha Semi Inset Basin 600mm x 460mm in White drops into a cut-out with the rim on the bench and gives you a 10L bowl, so there's room to wash hair or soak a shirt. It's white vitreous china with soft curves, 160mm high. One taphole takes a basin mixer. The overflow has a chrome plated grille, and the chrome pop-up waste with hair catcher suits 32mm to 40mm pipes. You get the plug and waste, overflow cap, cut-out template and installation instructions in the box. Backed by a 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, and 1 year on seals and labour.

• 600mm x 460mm semi inset basin with a 10L bowl, which is the biggest in this Raymor lineup
• Rim sits on the bench, so it suits a stone or laminate top with a cut-out
• White vitreous china with rounded lines that are easy to keep clean
• 1 taphole for a basin mixer, so the tap stays on the basin
• Overflow with chrome plated grille, which protects the vanity if the tap is left on
• Chrome pop-up waste with hair catcher for 32mm to 40mm plumbing
• Cut-out template included, with a 20 year warranty on the china

Check your vanity is at least 600mm wide and use the template to confirm the cut-out. Ask your plumber if you're unsure about the waste.

Match it with a Raymor Alpha basin mixer, or choose the Alpha 480mm basin for a smaller vanity.

Specifications

Construction material: Vitreous China
Colour: White
Tap holes: One taphole, suits a basin mixer
Overflow: Overflow included
Plug and waste: Included
Bowl capacity: 10L
Length: 600mm
Width: 460mm
Height: 160 mm
Shape: Rectangle
Country of origin: China
Warranty: 20 years vitreous china. 5 years plug and waste, overflow ring, chrome, PVD and electroplate finishes and fittings. 1 year seals and labour

What's In The Box

• 1 x Inset Basin
• 1 x Pop-up plug and waste
• 1 x Chrome overflow ring
• 1 x Cut-out template
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Basin cracked, stained or just dated? The Raymor Edge II Counter Top Basin 400mm x 400mm in White is a tidy square bowl that sits on top of the vanity, so it suits a straight swap on an existing bench or a fresh fit-out. It's white vitreous china with crisp, angled lines and stands 163mm tall. One taphole takes a basin mixer, and there's an overflow with a chrome ring so a forgotten plug won't flood the bench. In the box you get the basin, a pop-up plug and waste, the chrome overflow ring and installation instructions. Covered by a 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, and 1 year on seals and labour.

• 400mm x 400mm square counter top basin that sits on the bench, so no cut-out beyond the waste hole is needed
• White vitreous china with sharp angled edges that wipe clean and hide water marks
• 1 taphole for a basin mixer, which keeps the tap on the basin rather than the wall
• Overflow included with a chrome ring, so an overfilled bowl drains before it spills
• 7.81L bowl capacity, which is generous for a 400mm footprint
• Pop-up plug and waste, chrome overflow ring and instructions in the box
• 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, 1 year on seals and labour

Allow for the 163mm height when picking your basin mixer, and check the waste position on your bench. Ask your plumber if you're unsure.

Pair it with a Raymor basin mixer, or look at the Edge II inset and semi recessed basins if you'd rather the bowl sat in the bench.

Specifications

Construction material: Vitreous China
Colour: White
Tap holes: One taphole, suits a basin mixer
Overflow: Overflow included
Plug and waste: Included
Bowl capacity: 7.81L
Length: 400mm
Width: 400mm
Height: 163 mm
Shape: Rectangle
Country of origin: China
Warranty: 20 years vitreous china. 5 years plug and waste, overflow ring, chrome, PVD and electroplate finishes and fittings. 1 year seals and labour

What's In The Box

• 1 x Above Counter Basin
• 1 x Pop-up plug and waste
• 1 x Chrome overflow ring
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want a basin that sits on the bench without hogging it? The Raymor Sigma Counter Top Basin 450mm x 320mm in White is a low, rounded square bowl that suits a compact vanity or a powder room. It's white vitreous china and only 135mm tall, so it won't crowd a mixer or a mirror above. There's one taphole for a basin mixer. This one has no overflow, which gives you a plain bowl with nothing to catch grime, but it does mean you shouldn't leave the tap running with the plug in. The basin comes with a pop-up plug and waste and installation instructions. Covered by a 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, and 1 year on seals and labour.

• Counter top basin that sits on the vanity, so it only needs a waste hole cut in the bench
• 450mm x 320mm footprint at 135mm high, which suits a shallow bench or a small second bathroom
• White vitreous china with softly rounded corners that are easy to keep clean
• 1 taphole, so a basin mixer mounts straight onto the basin
• No overflow, for a plain bowl with no grille to collect gunk
• 7.59L bowl capacity, a useful size for the footprint
• Pop-up plug and waste and instructions in the box, with a 20 year warranty on the china

With no overflow, keep an eye on the tap when the plug is in. Check your bench has room for the mixer behind the basin, and ask your plumber if unsure.

Pair it with a Raymor basin mixer, or look at the Sigma inset and semi recessed basins in the same shape.

Specifications

Construction material: Vitreous China
Colour: White
Tap holes: One taphole, suits a basin mixer
Overflow: Non-overflow only
Plug and waste: Included
Bowl capacity: 7.59L
Length: 450mm
Width: 320mm
Height: 135 mm
Shape: Rectangle
Country of origin: China
Warranty: 20 years vitreous china. 5 years plug and waste, overflow ring, chrome, PVD and electroplate finishes and fittings. 1 year seals and labour

What's In The Box

• 1 x Above Counter Basin
• 1 x Pop-up plug and waste
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Need a longer inset bath with a bit more depth? The Raymor Sigma Inset Bath 1675mm in White runs 1675mm long, 760mm wide and 450mm high, so a taller person can lie back and still be covered. As a tile flange bath, it drops into a hob and your tiler beds the tiles over the flange on all four edges. It has the rounded square Sigma shape, which sits well with squarer basins and toilets. Waste is at the end, and there's no overflow to worry about cleaning. Plug and waste is sold separately, so pick one up with the bath. Made in Australia from acrylic with a steel reinforced rim, and covered by a 15 year warranty on the bath and 1 year on labour.

• 1675mm long, 760mm wide and 450mm high, so you get length and depth in one
• 4 edge tile bead that lets your tiler seal the bath into the hob on every side
• End waste and no overflow, so match it to your floor waste and watch the fill
• Rounded square Sigma shape that ties in with the Sigma island bath and tapware
• Steel reinforced rim to stop the edge flexing under tiles
• Plug and waste not included, so add one to your cart
• Made in Australia and warranted for 15 years on the bath, 1 year on labour

Check the hob length and your doorway width before ordering a 1675mm bath. Ask your plumber to confirm the end waste position.

Pair it with a Raymor bath pop-up plug and waste and a Sigma bath mixer.

Specifications

Construction material: Acrylic
Colour: White
Length: 1675mm
Width: 760mm
Height: 450 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Replacing a wide basin in a modern vanity? The Raymor Projix Amethyst II Semi Inset Basin 540mm x 460mm in White drops into a bench cut-out with the rim on top, which keeps the bowl low and the lines straight. It's white vitreous china with a 4.6L bowl and stands 165mm high. One taphole takes a basin mixer, and the overflow gives you a safety margin if the plug gets left in. A pop-up plug and waste comes in the box. Covered by a 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, and 1 year on seals and labour. If your existing cut-out is close to this size, it can be a quick swap without touching the benchtop.

• 540mm x 460mm semi inset basin that sits in a cut-out with the rim on the bench
• White vitreous china with a square, low profile at 165mm high
• 1 taphole for a basin mixer, so the install stays simple
• Overflow included, which drains the bowl before it spills onto the floor
• 4.6L bowl capacity, a sensible size for everyday use
• Pop-up plug and waste included, so there's nothing else to order
• 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, 1 year on seals and labour

Compare your bench cut-out to the basin size before ordering, and ask your plumber about the waste position.

Pair it with a Raymor Projix basin mixer, or look at the Projix under counter basin if you're fitting a new stone top.

Specifications

Construction material: Vitreous China
Colour: White
Tap holes: One taphole, suits a basin mixer
Overflow: Overflow included
Plug and waste: Included
Bowl capacity: 4.6L
Length: 540mm
Width: 460mm
Height: 165 mm
Shape: Rectangle
Country of origin: China
Warranty: 20 years vitreous china. 5 years plug and waste, overflow ring, chrome, PVD and electroplate finishes and fittings. 1 year seals and labour

What's In The Box

• 1 x Inset Basin
• 1 x Pop-up plug and waste

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want a freestanding bath but the bathroom's tight? The Raymor Alpha Back to Wall Freestanding Bath 1500mm in White gives you the freestanding look while sitting hard against the wall, so you don't lose floor space behind it and there's no gap to clean. A rear tile bead (10mm high, 8mm wide) lets your tiler check it into the wall and seal it if you want. It sits on its own adjustable self supporting feet with the plumbing through the floor. Size is 1500mm long, 800mm wide and 610mm high, with a centre waste and no overflow. The plug and waste is sold separately. Made in China from moulded acrylic, with a 10 year warranty on the bath and 1 year on labour.

• Back to wall freestanding, so you get the look without wasting floor behind the bath
• Rear tile bead of 10mm by 8mm, which lets you check it into the tiled wall for a sealed edge
• Adjustable self supporting feet, so your plumber can level it on a floor that isn't quite flat
• 1500mm long, 800mm wide, 610mm high, which suits a smaller bathroom or ensuite
• Centre waste with no overflow, so check the floor waste sits under the middle of the bath
• Plug and waste not included, so grab one with the bath
• 10 year warranty on the bath and 1 year on labour

Confirm the floor waste can be brought to the centre of the bath before you order. Ask your plumber about tiling it in or leaving it against the wall.

Add a Raymor bath pop-up plug and waste and match it with Alpha tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1500mm
Width: 800mm
Height: 610 mm
Waste location: Centre
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: China
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Back To Wall Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Second bathroom, small footprint, still want freestanding? The Raymor Winton Freestanding Bath 1500mm with Integrated Overflow in White is 1500mm long, 800mm wide and 530mm high, so it gives you the look without taking over the room. It stands on its own adjustable self supporting feet, with the waste and tapware through the floor and no hob to build. The overflow is built into the bath, which means it needs a plug and waste made for an overflow, and that's bought separately. Waste position is the centre. It's moulded acrylic made in Australia, and it's covered by a 10 year warranty on the bath and 1 year on labour.

• 1500mm long, 800mm wide and 530mm high, so it fits a smaller room but still runs deep
• Built in overflow that handles an overfilled bath before it reaches the floor
• Adjustable self supporting feet, so it sits level even if your floor doesn't
• Centre waste position for plumbing through the floor
• Plug and waste sold separately, and it has to be an overflow compatible waste
• Australian made moulded acrylic
• Bath warranted for 10 years, labour for 1 year

Check the floor waste can be brought to the centre of the bath. Ask your plumber to confirm the overflow waste before you order.

Pair it with a Raymor overflow compatible plug and waste and Winton bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1500mm
Width: 800mm
Height: 530 mm
Waste location: Centre
Overflow: Integrated overflow
Plug and waste: Not included
Country of origin: Australia
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Freestanding Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Tight space and no cabinet to work with? The Raymor Lawson Wall Hung Basin 505mm x 415mm in White fixes straight to the wall with the supplied bracket, so there's nothing on the floor to clean around. It's a traditional arch shape in white vitreous china, 190mm deep with a 4.5L bowl. One taphole takes a basin mixer. The overflow has a chrome plated grille, and the chrome pop-up waste with hair catcher connects to 32mm to 40mm plumbing. Plug and waste, overflow cap, wall fixing kit and installation instructions are all included. Backed by a 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, and 1 year on seals and labour. Get your plumber to check the wall fixings before you buy.

• Wall hung basin with the fixing kit in the box, so no vanity is needed
• 505mm x 415mm arch shape, which suits an older style home or a plain laundry
• White vitreous china, 190mm deep, holding 4.5L
• 1 taphole for a basin mixer, so the tap mounts on the basin
• Overflow with chrome plated grille, which stops water going over the edge
• Chrome pop-up waste with hair catcher for 32mm to 40mm pipes, so it suits most existing plumbing
• 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, 1 year on seals and labour

Your wall needs solid fixing points and the plumbing coming through it, so ask your plumber before ordering.

Finish it with a Raymor basin mixer, or look at the Lawson inset basin if you have a vanity.

Specifications

Construction material: Vitreous China
Colour: White
Tap holes: One taphole, suits a basin mixer
Overflow: Overflow included
Plug and waste: Included
Bowl capacity: 4.5L
Length: 505mm
Width: 415mm
Height: 190 mm
Shape: Arch
Country of origin: China
Warranty: 20 years vitreous china. 5 years plug and waste, overflow ring, chrome, PVD and electroplate finishes and fittings. 1 year seals and labour

What's In The Box

• 1 x Wall Hung Basin
• 1 x Pop-up plug and waste
• 1 x Chrome overflow ring
• 1 x Wall fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Building a second bathroom and after a freestanding bath that won't crowd the room? The Raymor Alpha Freestanding Bath 1500mm in White is the compact one. It sits on its own adjustable self supporting feet with the plumbing coming up through the floor, so there's no hob to build and no tiling around it. It measures 1500mm long, 750mm wide and 600mm high, with the waste in the centre and no overflow. You buy the plug and waste separately, so add one to your cart. It's moulded acrylic, made in China, and covered by a 10 year warranty on the bath and 1 year on labour.

• Freestanding on adjustable self supporting feet, so your plumber can level it without a hob
• 1500mm long, 750mm wide and 600mm high, which leaves walking room in a smaller bathroom
• Centre waste, so the floor waste needs to sit under the middle of the bath
• No overflow, so don't leave it filling unattended
• Plug and waste not included, so order one with the bath
• Moulded acrylic that is light to move and easy to wipe down
• Covered for 10 years on the bath and 1 year on labour

Make sure the floor waste can be moved to the centre position before you buy. Ask your plumber to check the floor is solid enough to be drilled.

Pair it with a Raymor bath pop-up plug and waste and a floor mounted Alpha bath mixer.

Specifications

Construction material: Acrylic
Colour: White
Length: 1500mm
Width: 750mm
Height: 600 mm
Waste location: Centre
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: China
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Freestanding Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Room for a proper freestanding bath? The Raymor Alpha Freestanding Bath 1700mm in White is the full length version, at 1700mm long, 800mm wide and 600mm high. Being freestanding, it rests on adjustable self supporting feet with the plumbing through the floor, so your plumber levels it on site and there's no hob to build or tile. The waste is in the centre, and there's no overflow. Plug and waste is a separate purchase, so add one to your order. It's made in China from moulded acrylic and comes with installation instructions in the box. Covered by a 10 year warranty on the bath and 1 year on labour.

• 1700mm long, 800mm wide and 600mm high for a full stretch out
• Adjustable self supporting feet, which take up uneven floors without packing
• Freestanding, so it needs the waste and tapware to come through the floor
• Centre waste position and no overflow
• Plug and waste sold separately
• Moulded acrylic construction that holds heat well and cleans easily
• 10 year warranty on the bath, 1 year on labour

At 1700mm, check the bath fits through your door and around corners on the way in. Ask your plumber to confirm the floor waste position.

Add a Raymor bath pop-up plug and waste and Alpha floor mounted tapware to finish it.

Specifications

Construction material: Acrylic
Colour: White
Length: 1700mm
Width: 800mm
Height: 600 mm
Waste location: Centre
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: China
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Freestanding Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Replacing a full size bath and want it to look freestanding? The Raymor Alpha Back to Wall Freestanding Bath 1700mm in White sits flush against the wall, so you keep the open look at the front and skip the awkward gap at the back. It has a rear tile bead (10mm by 8mm) so it can be tiled into the wall and sealed, or simply sit against it. Height adjustable self supporting feet mean your plumber levels it on site, with the waste running through the floor. It's 1700mm long, 800mm wide and 610mm high. The waste is in the centre and there's no overflow. Plug and waste isn't included. Moulded acrylic made in China, with a 10 year warranty on the bath and 1 year on labour.

• 1700mm long, 800mm wide and 610mm high, which gives a full length soak
• Sits hard against the wall, so no floor is lost and there's nothing to clean behind it
• Rear tile bead of 10mm by 8mm for checking into the tiled wall and sealing it
• Self supporting adjustable feet that save you building a hob
• Centre waste with no overflow, so plan the floor waste under the middle
• Plug and waste sold separately, so add one when you order
• Backed by a 10 year warranty on the bath and 1 year on labour

Check it will fit through the doorway and hallway at 1700mm long. Ask your plumber to confirm the centre waste can be plumbed through your floor.

Team it with a Raymor bath pop-up plug and waste and Alpha bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1700mm
Width: 800mm
Height: 610 mm
Waste location: Centre
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: China
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Back To Wall Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Planning a tiled hob with the bath rim on display? The Raymor Winton Island Bath 1700mm Centre Waste in White is built for exactly that. It's an island bath, so it sets into a hob on all four sides with the rim exposed, and you can tile the hob in whatever suits the room. Size is 1700mm long, 800mm wide and 500mm high, which is wide and deep enough for a proper soak. The waste is in the centre of the bath, so the floor waste needs to sit under the middle. No overflow, so don't wander off while it fills. Plug and waste is bought separately. It's Australian made acrylic with a steel reinforced rim, and the warranty is 10 years on the bath and 1 year on labour.

• Island bath for a hob on all four sides, with the rim left showing
• 1700mm long, 800mm wide and 500mm high, which gives real width and depth
• Centre waste, so plan the floor waste under the middle of the hob
• No overflow, which means a clean bath interior and no grille to scrub
• Steel reinforced rim that sits firm on the hob without flexing
• Plug and waste sold separately, so add one to the order
• Made in Australia with a 10 year warranty on the bath and 1 year on labour

Have the hob framed to the bath's outside size and confirm the centre waste with your plumber before the slab or floor is cut.

Add a Raymor bath pop-up plug and waste and Winton bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1700mm
Width: 800mm
Height: 500 mm
Waste location: Centre
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Island Bath
• Installation instructions

Replacing a basin in a small vanity top? The Raymor Sigma Inset Basin 450mm x 320mm in White drops into a cut-out with its rim sitting on the bench, which keeps the bowl low and the top easy to wipe down. It's white vitreous china with a rounded square shape and measures 143mm deep. One taphole takes a basin mixer. There's no overflow on this model, so the bowl stays plain, but don't walk away with the plug in and the tap on. You get the basin, a pop-up plug and waste and installation instructions in the box. Backed by a 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, and 1 year on seals and labour.

• Inset basin with the rim on the bench, so it suits a standard cut-out in laminate or stone
• 450mm x 320mm size, which fits a narrow vanity where a bigger bowl won't
• 143mm deep bowl in white vitreous china that resists staining
• 1 taphole for a basin mixer, so no wall tapware is needed
• No overflow, which means one less thing to clean around
• Pop-up plug and waste and instructions included
• 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, 1 year on seals and labour

Measure your current cut-out against the basin before you order, and ask your plumber or joiner if the hole needs adjusting.

Match it with a Raymor basin mixer, or see the Sigma counter top basin if your bench has no cut-out.

Specifications

Construction material: Vitreous China
Colour: White
Tap holes: One taphole, suits a basin mixer
Overflow: Non-overflow only
Plug and waste: Included
Length: 450mm
Width: 320mm
Height: 143 mm
Shape: Rectangle
Country of origin: China
Warranty: 20 years vitreous china. 5 years plug and waste, overflow ring, chrome, PVD and electroplate finishes and fittings. 1 year seals and labour

What's In The Box

• 1 x Inset Basin
• 1 x Pop-up plug and waste
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Shallow vanity but you still want a proper bowl? The Raymor Sigma Semi Recessed Basin 450mm x 350mm in White sits half in the bench with the bowl overhanging the front edge, which is the trick for getting a decent basin onto a narrow cabinet. It's white vitreous china in a soft rounded square, 153mm high. A single taphole suits a basin mixer, and there's an overflow with a chrome ring so an overfilled bowl drains rather than spilling. Basin, pop-up plug and waste, chrome overflow ring and installation instructions are all in the box. Warranty runs 20 years on the vitreous china, 5 years on the plug and waste and finishes, and 1 year on seals and labour.

• Semi recessed basin that overhangs the front of the vanity, so a narrow bench gets a full bowl
• 450mm x 350mm, 153mm high, which keeps a low profile in a tight ensuite
• White vitreous china with rounded corners that are simple to keep clean
• 1 taphole, so your basin mixer mounts on the basin
• Overflow with chrome ring, which protects the cabinet if the tap is left running
• 8.38L bowl capacity, the biggest bowl in the Sigma range
• Pop-up plug and waste and instructions included, with a 20 year warranty on the china

Check the front of your bench can be cut for a semi recessed basin, and confirm the cabinet depth. Ask your plumber or joiner if unsure.

Add a Raymor basin mixer, or look at the Sigma wall hung basin if you'd rather skip the vanity altogether.

Specifications

Construction material: Vitreous China
Colour: White
Tap holes: One taphole, suits a basin mixer
Overflow: Overflow included
Plug and waste: Included
Bowl capacity: 8.38L
Length: 450mm
Width: 350mm
Height: 153 mm
Shape: Rectangle
Country of origin: China
Warranty: 20 years vitreous china. 5 years plug and waste, overflow ring, chrome, PVD and electroplate finishes and fittings. 1 year seals and labour

What's In The Box

• 1 x Semi Recessed Basin
• 1 x Pop-up plug and waste
• 1 x Chrome overflow ring
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Worried about a freestanding bath overflowing? The Raymor Winton Freestanding Bath 1700mm with Integrated Overflow in White has the overflow built in, so it takes care of itself if the tap's left running a bit long. It's a freestanding bath on adjustable self supporting feet with the plumbing through the floor, so there's no hob to build. At 1700mm long, 800mm wide and 530mm high it's a full size soak. The waste is in the centre. Because of the overflow, it needs a plug and waste that suits an overflow, and that's sold separately. Made in Australia from moulded acrylic, with a 10 year warranty on the bath and 1 year on labour.

• Integrated overflow, so a forgotten tap drains away instead of over the rim
• Freestanding on adjustable self supporting feet, which makes levelling simple for your plumber
• 1700mm long, 800mm wide and 530mm high for a proper stretch out
• Centre waste, so the floor waste needs to come up under the middle
• Plug and waste not included, and it must be an overflow compatible waste to suit this bath
• Moulded acrylic, made in Australia
• 10 years warranty on the bath, 1 year on labour

Confirm your floor waste can be moved to the centre and that the bath fits through the door at 1700mm. Ask your plumber about the overflow connection.

Add a Raymor overflow compatible bath plug and waste and Winton floor mounted tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1700mm
Width: 800mm
Height: 530 mm
Waste location: Centre
Overflow: Integrated overflow
Plug and waste: Not included
Country of origin: Australia
Warranty: 10 years on the bath, 1 year on parts and labour

What's In The Box

• 1 x Freestanding Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Building a hob and want the rim on show? The Raymor Sigma Island Bath 1675mm End Waste in White is an island bath, which means it's set into a hob on all four sides with the rim left exposed rather than tiled over. That gives you a clean, squarer edge and lets you tile the hob to suit the room. It measures 1675mm long, 750mm wide and 450mm high. The waste is at the end, not the centre, so plan the floor waste accordingly. There's no overflow. The plug and waste isn't included, so add one to your order. Australian made acrylic, steel reinforced rim, and a 15 year warranty on the bath with 1 year on labour.

• Island bath set into a hob on all four sides with the rim exposed, so no tile bead to hide
• 1675mm long, 750mm wide and 450mm high for a deeper, longer soak
• End waste position, which suits a floor waste near the tap end
• No overflow, so keep an eye on the tap while it fills
• Rounded square styling that pairs with the Sigma inset bath in a second bathroom
• Steel reinforced rim, which stays firm on the hob
• Plug and waste not included. Australian made with a 15 year warranty on the bath and 1 year on labour

Get your builder to size the hob to the bath before it's framed, and confirm the end waste with your plumber.

Add a Raymor bath pop-up plug and waste and Sigma bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1675mm
Width: 750mm
Height: 450 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Island Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

After a no fuss bath for the main bathroom? The Raymor Recline II Rectangle Inset Bath 1650mm in White is the longer of the two Recline sizes, at 1650mm long, 715mm wide and 380mm high. Being an inset tile flange bath, it drops into a hob and your tiler finishes the tiles over the flange on all four edges. Moulded armrests give you somewhere to rest your elbows, and the slip resistant base pattern makes stepping in a bit safer. The waste sits at the end and there's no overflow. You buy the plug and waste separately. Australian made acrylic with a steel reinforced rim, backed by a 15 year warranty on the bath and 1 year on labour.

• 1650mm long, 715mm wide and 380mm high, so a taller adult can stretch out
• 4 edge tile bead, which means it tiles into the hob on all four sides
• Slip resistant moulded base pattern for better grip underfoot
• Moulded armrests built into the acrylic for a comfortable lean
• End waste position and no overflow, so keep an eye on the fill
• Steel reinforced rim to keep the edge solid in the hob
• Plug and waste sold separately. Made in Australia with a 15 year warranty on the bath and 1 year on labour

Check your hob is long enough and that a 1650mm bath will get through the door. Ask your plumber about the end waste.

Finish it with a Raymor bath pop-up plug and waste and a Projix bath spout and wall mixer.

Specifications

Construction material: Acrylic
Colour: White
Length: 1650mm
Width: 715mm
Height: 380 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Old bath cracked, stained or just small? The Raymor Aruba Rectangle Inset Bath 1520mm in White is a straightforward swap for a tired inset bath in a family bathroom. It's a tile flange bath, so it drops into a hob and your tiler finishes over the flange on all four edges. At 1520mm long, 755mm wide and 420mm high it suits the hob most older bathrooms already have. The waste sits at the end and there's no overflow, so don't walk away with the tap running. The plug and waste isn't in the box, so add one to your order. Made in Australia from acrylic with a moulded headrest and lumbar support. Backed by a 15 year warranty on the bath and 1 year on labour.

• Inset bath with a 4 edge tile bead, so it drops into a hob and tiles in on all four sides
• 1520mm long, 755mm wide and 420mm high, which fits a standard hob without rebuilding it
• End waste position with no overflow, so check your floor waste lines up before you tile
• Moulded headrest and lumbar support for a comfortable soak, not just a quick wash
• Steel reinforced rim that keeps the edge firm under a tiled hob
• Plug and waste sold separately, so pick one up with the bath
• Made in Australia and backed by a 15 year warranty on the bath, 1 year on labour

Measure your hob opening and check where the floor waste sits before you order. Ask your plumber if you're unsure about the end waste.

Add a Raymor bath pop-up plug and waste, and finish it off with Edge II bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1520mm
Width: 755mm
Height: 420 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Bath past its best and you don't want to rebuild the hob? The Raymor Projix Inset Bath 1525mm in White is a simple like for like swap. It's a tile flange bath, so it drops into the hob and your tiler runs the tiles over the flange on all four edges. At 1525mm long, 725mm wide and 380mm high it's a shallower bath that's easy to step into. The waste is at the end and there's no overflow, so keep the tap in sight while it fills. The plug and waste isn't supplied, so add one to your order. It's Australian made acrylic with a steel reinforced rim, and the warranty runs 15 years on the bath with 1 year on labour.

• Inset bath with a 4 edge tile bead, so it tiles into a hob on all sides
• 1525mm long, 725mm wide and 380mm high, which suits a narrower hob
• Lower 380mm height that is easier for kids and older family members to get in and out of
• End waste with no overflow, so match it to your existing floor waste
• Steel reinforced rim to keep the edge rigid once tiled
• Plug and waste not included, so buy one with the bath
• Made in Australia, with a 15 year warranty on the bath and 1 year on labour

Measure the inside of your hob before ordering. Ask your plumber to confirm the end waste position lines up.

Add a Raymor bath pop-up plug and waste and pair it with Projix bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1525mm
Width: 725mm
Height: 380 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Family bath copped a beating? The Raymor Recline II Rectangle Inset Bath 1510mm in White is a sensible replacement for the kids' bathroom. It's a tile flange bath that sits in a hob and tiles in on all four edges, so it goes back into the space you already have. It measures 1510mm long, 715mm wide and 380mm high, with moulded armrests and a slip resistant base pattern that helps on the way in and out. The waste is at the end and there's no overflow. Plug and waste isn't included, so add one to your order. It's Australian made acrylic with a steel reinforced rim, and you get 15 years warranty on the bath plus 1 year on labour.

• Inset design with a 4 edge tile bead, so it drops into a hob and tiles in all round
• 1510mm long, 715mm wide and 380mm high, which suits a compact family bathroom
• Moulded slip resistant base for surer footing with kids and wet feet
• Moulded armrests so you can sit back comfortably
• End waste with no overflow, so line it up with your existing floor waste
• Steel reinforced rim that holds the shape under the tiles
• Plug and waste not included, so buy one with the bath. 15 year warranty on the bath, 1 year on labour

Measure your hob opening and confirm the end waste position with your plumber before ordering.

Add a Raymor bath pop-up plug and waste and Edge II bath tapware to finish the job.

Specifications

Construction material: Acrylic
Colour: White
Length: 1510mm
Width: 715mm
Height: 380 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Got a longer hob to fill? The Raymor Aruba Rectangle Inset Bath 1665mm in White gives you extra stretch for a taller bather without moving to a freestanding. It drops into a hob as a tile flange bath, and your tiler beds the tiles over the flange on all four edges for a neat, sealed finish. It measures 1665mm long, 755mm wide and 420mm high. The waste is at the end and there's no overflow, so keep an eye on the tap while it fills. You'll need to buy the plug and waste separately. It's Australian made acrylic with a moulded headrest, lumbar support and a steel reinforced rim. The bath carries a 15 year warranty, with 1 year on labour.

• 1665mm long, 755mm wide, 420mm high, which gives a taller bather room to stretch out
• 4 edge tile bead for a hob install, so the tiles run over the flange and seal the edge
• End waste with no overflow, so line it up with your existing floor waste where you can
• Lumbar support and a moulded headrest built into the shape for a comfortable lean back
• Steel reinforced rim, which stops the edge flexing once it's tiled in
• Plug and waste not included, so add one to the order
• Australian made, with a 15 year warranty on the bath and 1 year on labour

Check the hob length and door access before you commit to the longer size. Your plumber can confirm the end waste position works with your floor.

Pair it with a Raymor bath pop-up plug and waste and Projix bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1665mm
Width: 755mm
Height: 420 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Prefer a squarer look in an inset bath? The Raymor Sigma Inset Bath 1525mm in White has rounded square lines rather than the usual soft oval. It's a tile flange bath, so it sits in a hob and tiles in on all four edges, which suits a straight replacement or a new hob build. Size is 1525mm long, 760mm wide and 450mm high, so it's a touch deeper than many baths this length. The waste is at the end and there's no overflow, so don't leave it filling unattended. Plug and waste is not in the box, so add one. Acrylic construction with a steel reinforced rim, backed by a 15 year warranty on the bath and 1 year on labour.

• Rounded square shape that suits a squarer basin and toilet without looking boxy
• 1525mm long, 760mm wide and 450mm high, which gives a deeper soak than a 380mm bath
• Inset with a 4 edge tile bead, so it drops into a hob and tiles in properly
• End waste with no overflow, so check your floor waste lines up
• Steel reinforced rim that keeps the bath rigid in the hob
• Plug and waste sold separately, so order one with the bath
• Warranty is 15 years on the bath and 1 year on labour

At 450mm high, check your hob height suits before you order. Ask your plumber about the end waste position.

Add a Raymor bath pop-up plug and waste and match it with Sigma tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1525mm
Width: 760mm
Height: 450 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Hob a bit longer than the standard 1500? The Raymor Projix Inset Bath 1650mm in White fills it without going to a custom size. It drops into the hob as a tile flange bath, and the tile bead on all four edges lets your tiler seal it in properly. It's 1650mm long, 725mm wide and 380mm high, so it's on the shallower side and easy to climb into. The waste sits at the end of the bath and there's no overflow. You'll need to add a plug and waste, as it isn't in the box. Made in Australia from acrylic with a steel reinforced rim, and backed by a 15 year warranty on the bath and 1 year on labour.

• 1650mm long, 725mm wide and 380mm high, which gives extra length on a narrow footprint
• 4 edge tile bead for a hob install, so every edge is tiled and sealed
• End waste and no overflow, so check where your floor waste sits
• Steel reinforced rim, which keeps the bath from flexing in the hob
• Plug and waste sold separately, so grab one when you order
• Australian made acrylic with a 15 year warranty on the bath and 1 year on labour

Check the hob length and the doorway before you order the longer size. Your plumber can confirm the end waste works with your setup.

Match it with a Raymor bath pop-up plug and waste and Projix pin lever bath tapware.

Specifications

Construction material: Acrylic
Colour: White
Length: 1650mm
Width: 725mm
Height: 380 mm
Waste location: End
Overflow: Non-overflow only
Plug and waste: Not included
Country of origin: Australia
Warranty: 15 years on the bath, base support frame and feet, 1 year on parts and labour

What's In The Box

• 1 x Inset Bath
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.