All Products

Finishing a toilet refit and the brush is letting it down? The Raymor Projix Toilet Brush & Holder in Brushed Nickel mounts to the wall, so the brush stays put and the floor around the pan is easy to mop. The frosted glass holder hides the brush and lifts out for a rinse, set in a zinc alloy bracket with a brushed nickel finish. It's 115mm wide, 355mm high and projects 150mm, on brass four-point fixings, rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• Wall mounted, so the brush isn't kicked over and the floor stays clear for cleaning
• Frosted glass holder that hides the brush head and lifts out to rinse
• Zinc alloy bracket in a brushed nickel finish to match Projix roll holders and rails
• Brass four-point fixings, rated for commercial toilets as well as home ones
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Fix it low beside the pan where the brush is handy but out of the way. Check for pipes behind the wall before drilling.

Complete the toilet with a Projix roll holder, robe hook and towel rail in the same finish.

Specifications

Construction material: Zinc
Overall length: 115 mm
Projection: 150 mm
Height: 355 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet brush and holder
• Fixing Kit
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Need a simple, sturdy holder that takes a standard roll? The Raymor Projix Toilet Roll Holder in Brushed Nickel is a straightforward wall-mounted holder for a single roll. It's 175mm wide, 98mm high and projects 65mm, so it sits close to the wall and clears a swinging door in a tight toilet. The body is zinc alloy in a brushed nickel finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• Holds a single standard roll and swaps over in seconds
• 65mm projection, which keeps it tight to the wall in a narrow toilet
• Zinc alloy body with a brushed nickel finish that matches Projix taps, rails and hooks
• Brass four-point fixings so it stays on the wall, rated for commercial toilets
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use plugs in plasterboard or tiles, and check for pipes before you drill beside the cistern.

Pair it with the Projix toilet brush and holder, robe hook and towel rails in the same finish.

Specifications

Construction material: Zinc
Overall length: 175 mm
Projection: 65 mm
Height: 98 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Soap sliding around the edge of the basin? The Raymor Edge II Soap Holder in Brushed Nickel gives a bar of soap a proper home on the wall, out of the puddle. Squared like the rest of the Edge II range, it's brass with a brushed nickel finish, so it won't stain or corrode. It's 206mm wide, 24mm high and 120mm deep, which suits a shower wall or the space beside the basin. A fixing kit and installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• Wall-mounted soap dish, so the bar dries between uses instead of sitting in water
• Brass construction with a brushed nickel finish that holds up in the shower
• 206mm wide and 120mm deep, enough for a full bar without crowding the wall
• Fixing kit and installation instructions included, ready for a quick fit
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall using the supplied kit. Use tile plugs on tiled walls and check for pipes before drilling.

Edge II also covers towel rails, shelves, hand towel holders and square tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 206 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Soap holder
• Fixing Kit
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

No vanity storage and nowhere to put the hand wash? The Raymor Projix Glass Shelf 610mm in Black gives you a 610mm run of tempered glass shelf, 157mm deep, enough for a row of full size bottles above the basin or next to the bath. Tempered glass wipes clean and won't stain, and the zinc alloy brackets carry a black finish to match Projix tapware. It mounts on brass four-point fixings and is rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• 610mm wide and 157mm deep, so it holds bottles, a soap dispenser and a toothbrush cup at once
• Tempered glass shelf that resists chipping and cleans with a wipe
• Zinc alloy brackets with a black finish that match Projix taps and rails
• Brass four-point fixings, which keep the shelf level under a load of bottles
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Go into studs or use tile-rated anchors, keep the load sensible, and ask your handyman if you're unsure about the wall.

Pair it with Projix towel rails, robe hooks, roll holders and pin lever tapware.

Specifications

Construction material: Zinc
Overall length: 610 mm
Projection: 157 mm
Height: 54.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Hand towel always ending up on the vanity? The Raymor Edge II Hand Towel Holder in Brushed Nickel is a short, squared rail sized for a hand towel next to the basin, in an ensuite or a powder room where a full rail won't fit. It's brass with a brushed nickel finish, so it shrugs off wet hands and cleaning. At 239mm wide, 30mm high and 72.5mm deep it sits neatly under a mirror or beside the vanity. Fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• 239mm rail sized for a hand towel, which suits powder rooms and tight ensuites
• Brass build with a brushed nickel finish that resists tarnish and wipes clean
• 72.5mm projection, so the towel hangs clear of the wall and dries faster
• Fixing kit and installation instructions supplied
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with the supplied fixings. Check for pipes and cables before you drill next to the basin.

Match it with Edge II full towel rails, the soap holder, robe hooks and square tapware.

Specifications

Construction material: Brass
Overall length: 239 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel holder
• Fixing Kit
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want a shelf that goes with round tapware rather than fighting it? The Raymor Boston II Glass Shelf 530mm in Brushed Nickel gives you a proper spot for soap, moisturiser and a toothbrush cup above the basin or beside the bath. A glass shelf sits in a round brass rail, so it wipes clean and won't discolour. It's 530mm wide, 98mm high and 133mm deep, enough for a row of bottles. The rounded rail suits Boston II and other curved tapware. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Chrome.

• Glass shelf on a brass rail, so bottles sit flat and the surface wipes clean
• 530mm wide and 133mm deep, which fits a row of full size bottles
• Round rail with a brushed nickel finish that matches Boston II and other curved tapware
• Brass construction that holds its shape in a steamy bathroom
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use proper anchors in tiles, and go easy on the weight. Ask your handyman or plumber if unsure.

Boston II also does towel rails, robe hooks, roll holders and tapware in the same three finishes.

Specifications

Construction material: Glass, Brass
Overall length: 530 mm
Projection: 133 mm
Height: 98 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Replacing a rail and want square lines to match the taps? The Raymor Edge II Double Towel Rail 635mm in Brushed Nickel puts two square bars side by side on one bracket, so a pair of bath towels dry flat instead of overlapping. The 635mm width suits an ensuite or a smaller bathroom, and the 120mm projection leaves room between the bars for air to move. It's solid brass under a brushed nickel finish, with installation instructions supplied. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome, and in a 785mm length.

• Two bars side by side, which doubles your hanging space on one wall
• 635mm wide, a sensible fit for an ensuite or a compact bathroom
• Solid brass with a brushed nickel finish that won't tarnish in steam
• 120mm projection, so both towels get airflow and dry properly
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use decent anchors in tile, and ask your handyman or plumber if you're not sure.

Match it with Edge II single rails, robe hooks and roll holders, or step up to the 785mm double rail for a longer wall.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Family of four fighting over one rail? The Raymor Boston II Double Towel Rail 850mm in Chrome is the longer of the two Boston II double rails, with twin round bars across 850mm of wall. That's room for two bath sheets hung flat, or towels and a bath mat. The bars sit 118mm out from the wall, so air gets around both. It's brass all the way through with a chrome finish, and installation instructions come with the rail. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• 850mm long, so two bath sheets hang flat without overlapping
• Twin bars for double the hanging space on one set of fixings
• Brass throughout in a chrome finish, made to shrug off a steamy bathroom
• 118mm projection that lets air move around both towels
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long wants solid fixing, so find the studs or use good anchors in tiles.

If 850mm is too wide, the Boston II double rail also comes at 650mm, with matching single rails and hooks.

Specifications

Construction material: Brass
Overall length: 850 mm
Projection: 118 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Old rail too short for the wall above the bath? The Raymor Edge II Single Towel Rail 785mm in Chrome is the longer rail in the range, wide enough for a bath sheet or two hand towels side by side on one bar. The squared profile suits square tapware and modern vanities. Brass all the way through, with a chrome finish that stands up to steam, it's 785mm wide, 24mm high and sits 71.5mm off the wall. Installation instructions are included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• 785mm wide, so a bath sheet or two hand towels hang flat on one bar
• Brass construction that won't bow or corrode in a steamy bathroom
• Low 24mm profile with a 71.5mm projection, keeping it neat but clear of the wall
• Chrome finish to tie in with Edge II mixers and accessories
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall. Long rails need both ends anchored properly, so find studs or use tile-rated plugs, or get your plumber or handyman to fit it.

Team it with the 635mm Edge II rail, robe hooks, roll holders and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Powder room with no room for a proper rail? The Raymor Edge II Hand Towel Rail in Chrome is a short, single square bar built for a hand towel beside the basin or in a powder room. At 239mm wide it slots in next to a vanity where a full rail won't fit, and it stands 72.5mm off the wall so the towel hangs freely. It's solid brass with a chrome finish, instructions in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black.

• 239mm bar sized for a hand towel, which fits beside a basin where a bath towel rail won't
• Solid brass construction that keeps its shape and shrugs off splashes
• Square bar in a chrome finish to match Edge II tapware
• 72.5mm projection, so a folded hand towel hangs clear of the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Check for pipes behind the wall next to the basin before drilling, or ask your plumber.

Team it with an Edge II robe hook, roll holder and basin mixer in the same finish.

Specifications

Construction material: Brass
Overall length: 239 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Bathroom wall too narrow for a long rail but you still need two? The Raymor Edge II Double Towel Rail 635mm in Chrome puts two square bars side by side on one bracket, so a pair of bath towels dry flat instead of overlapping. The 635mm width suits an ensuite or a smaller bathroom, and the 120mm projection leaves room between the bars for air to move. It's solid brass under a chrome finish, with installation instructions supplied. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel, and in a 785mm length.

• Two bars side by side, which doubles your hanging space on one wall
• 635mm wide, a sensible fit for an ensuite or a compact bathroom
• Solid brass with a chrome finish that won't tarnish in steam
• 120mm projection, so both towels get airflow and dry properly
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use decent anchors in tile, and ask your handyman or plumber if you're not sure.

Match it with Edge II single rails, robe hooks and roll holders, or step up to the 785mm double rail for a longer wall.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Swapping out the old loo fittings for something square and simple? The Raymor Edge II Toilet Roll Holder in Chrome is a single arm holder with a square profile, made for bathrooms with Edge II or other angular tapware. It's solid brass in a chrome finish, so nothing snaps or rusts. It's 174mm wide and sits 72.5mm out from the wall, taking a standard roll you can swap with one hand. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• Single arm, so changing the roll is a one-handed job
• Solid brass body that stays firm and won't corrode in a damp toilet
• Square profile with a chrome finish that lines up with Edge II tapware
• 174mm wide and 72.5mm off the wall, which keeps it neat in a narrow toilet
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it where you can reach it from the seat, and check for pipes before you drill.

Prefer somewhere to rest your phone? The Edge II Roll Holder with Shelf does that. Otherwise match this one with Edge II robe hooks and towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 174 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Nowhere to hang a towel by the shower? The Raymor Edge II Robe Hook in Black is a slim single hook with a square profile, made to hang a towel or robe next to the shower or behind the door. It's small, 53mm high and just 33mm off the wall, so it tucks in where a bigger hook would get in the way. Solid brass in a black finish. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• Slim square hook, so it fits on a narrow strip of wall or tile
• Solid brass that won't bend under a wet bath towel
• Black finish that matches Edge II tapware and rails
• 33mm projection, which keeps it low profile in a tight space
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed. Use a wall plug in plasterboard or tiles and check for pipes before drilling.

Grab two or three, then match them with Edge II towel rails, roll holders and a soap dish in the same finish.

Specifications

Construction material: Brass
Overall length: 16 mm
Projection: 33 mm
Height: 53 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Robe hook
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Main bathroom with a long wall and a lot of towels? The Raymor Edge II Double Towel Rail 785mm in Chrome is the longer Edge II double rail, with twin square bars stretching 785mm along the wall. Hang two bath sheets flat, or towels behind and a bath mat in front. Both bars sit 120mm from the wall so nothing sits damp against the tiles. It's solid brass throughout with a chrome finish, instructions included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• 785mm long, so two bath sheets hang flat without overlapping
• Twin square bars on one set of fixings, for double the towel space
• Solid brass build with a chrome finish that handles a steamy main bathroom
• 120mm projection that keeps both towels clear of the wall and each other
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long needs solid fixing at both ends, so find the studs or use good tile anchors.

Wall too short? The Edge II double rail also comes at 635mm, with single rails, hooks and roll holders to match.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Two towels squashed onto one bar? The Raymor Edge II Double Towel Rail 635mm in Black puts two square bars side by side on one bracket, so a pair of bath towels dry flat instead of overlapping. The 635mm width suits an ensuite or a smaller bathroom, and the 120mm projection leaves room between the bars for air to move. It's solid brass under a black finish, with installation instructions supplied. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel, and in a 785mm length.

• Two bars side by side, which doubles your hanging space on one wall
• 635mm wide, a sensible fit for an ensuite or a compact bathroom
• Solid brass with a black finish that won't tarnish in steam
• 120mm projection, so both towels get airflow and dry properly
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use decent anchors in tile, and ask your handyman or plumber if you're not sure.

Match it with Edge II single rails, robe hooks and roll holders, or step up to the 785mm double rail for a longer wall.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Towels ending up on the floor because there's nowhere to hang them? The Raymor Projix Robe Hook in Chrome is a small fix that makes a real difference: one hook for a towel or robe, screwed straight to the wall. It's compact at 43mm wide and 55mm high, and stands 65mm off the wall so a thick bath towel hangs without slipping. The hook is zinc alloy in a chrome finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Single hook for a towel or robe, handy behind a door or beside the shower
• 65mm projection, so a folded bath towel hangs clear of the wall
• Zinc alloy build with a chrome finish that shrugs off steam
• Brass four-point fixings, for a hook that doesn't work loose
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use a wall plug in plasterboard or tiles, and check for pipes before you drill.

Fit a couple, then match them with Projix towel rails, roll holders and shelves in the same finish.

Specifications

Construction material: Zinc Die Cast
Overall length: 43 mm
Projection: 65 mm
Height: 55 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Robe hook
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Bath sheets that need more than a short rail? The Raymor Edge II Double Towel Rail 785mm in Black is the longer Edge II double rail, with twin square bars stretching 785mm along the wall. Hang two bath sheets flat, or towels behind and a bath mat in front. Both bars sit 120mm from the wall so nothing sits damp against the tiles. It's solid brass throughout with a black finish, instructions included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• 785mm long, so two bath sheets hang flat without overlapping
• Twin square bars on one set of fixings, for double the towel space
• Solid brass build with a black finish that handles a steamy main bathroom
• 120mm projection that keeps both towels clear of the wall and each other
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long needs solid fixing at both ends, so find the studs or use good tile anchors.

Wall too short? The Edge II double rail also comes at 635mm, with single rails, hooks and roll holders to match.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Need a longer rail for a big bath sheet? The Raymor Edge II Single Towel Rail 785mm in Black is the longer rail in the range, wide enough for a bath sheet or two hand towels side by side on one bar. The squared profile suits square tapware and modern vanities. Brass all the way through, with a black finish that stands up to steam, it's 785mm wide, 24mm high and sits 71.5mm off the wall. Installation instructions are included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• 785mm wide, so a bath sheet or two hand towels hang flat on one bar
• Brass construction that won't bow or corrode in a steamy bathroom
• Low 24mm profile with a 71.5mm projection, keeping it neat but clear of the wall
• Black finish to tie in with Edge II mixers and accessories
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall. Long rails need both ends anchored properly, so find studs or use tile-rated plugs, or get your plumber or handyman to fit it.

Team it with the 635mm Edge II rail, robe hooks, roll holders and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Soap sliding around the edge of the basin? The Raymor Edge II Soap Dish in Chrome is a wall mounted dish that keeps a bar of soap up off the bench, beside the basin or in the shower. The squared shape matches Edge II and other angular tapware. It's solid brass with a chrome finish, 206mm wide, 24mm high and 120mm deep, so it takes a full size bar with space around it. Installation instructions come in the box. Backed by a 10 year warranty on the body, chrome finish and fittings, 1 year on seals and labour.

• Lifts the soap off the bench, so the vanity stays cleaner and the soap lasts longer
• Solid brass dish with a chrome finish that rinses clean
• 206mm wide and 120mm deep, which suits a full size bar of soap
• Squared shape that lines up with Edge II tapware and accessories
• 10 year warranty on the body, chrome finish and fittings, 1 year on seals and labour

Wall mounted. In a shower, fix into the tile with proper anchors and seal the screw holes, or ask your plumber.

Team it with Edge II towel rails, robe hooks and a roll holder in Chrome.

Specifications

Construction material: Brass
Overall length: 206 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Soap dish
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Vanity top disappearing under bottles? The Raymor Edge II Shelf 426mm in Chrome is a slim, squared shelf for the shower, above the basin or beside the bath. It's brass with a chrome finish, so it holds up in a wet area and wipes clean. At 426mm wide and 120mm deep there's room for a couple of bottles and a bar of soap, and at 24mm high it doesn't crowd the wall. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• 426mm wide and 120mm deep, which takes a row of shampoo bottles
• Brass build that won't rust in the shower
• Slim 24mm profile, so it looks neat under a mirror or in a niche
• Chrome finish that matches Edge II rails, hooks and tapware
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Anchor into studs or use proper tile plugs, and keep the load sensible. Ask your handyman or plumber if you're not sure.

Pair it with Edge II towel rails, the roll holder with shelf and square tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 426 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Basin ledge crowded with toothbrushes, razors and bottles? The Raymor Projix Glass Shelf 610mm in Chrome gives you a 610mm run of tempered glass shelf, 157mm deep, enough for a row of full size bottles above the basin or next to the bath. Tempered glass wipes clean and won't stain, and the zinc alloy brackets carry a chrome finish to match Projix tapware. It mounts on brass four-point fixings and is rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• 610mm wide and 157mm deep, so it holds bottles, a soap dispenser and a toothbrush cup at once
• Tempered glass shelf that resists chipping and cleans with a wipe
• Zinc alloy brackets with a chrome finish that match Projix taps and rails
• Brass four-point fixings, which keep the shelf level under a load of bottles
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Go into studs or use tile-rated anchors, keep the load sensible, and ask your handyman if you're unsure about the wall.

Pair it with Projix towel rails, robe hooks, roll holders and pin lever tapware.

Specifications

Construction material: Zinc Die Cast & Tempered Glass
Overall length: 610 mm
Projection: 157 mm
Height: 54.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Vanity too small for everyone's bits and pieces? The Raymor Boston II Glass Shelf 530mm in Chrome gives you a proper spot for soap, moisturiser and a toothbrush cup above the basin or beside the bath. A glass shelf sits in a round brass rail, so it wipes clean and won't discolour. It's 530mm wide, 98mm high and 133mm deep, enough for a row of bottles. The rounded rail suits Boston II and other curved tapware. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Glass shelf on a brass rail, so bottles sit flat and the surface wipes clean
• 530mm wide and 133mm deep, which fits a row of full size bottles
• Round rail with a chrome finish that matches Boston II and other curved tapware
• Brass construction that holds its shape in a steamy bathroom
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use proper anchors in tiles, and go easy on the weight. Ask your handyman or plumber if unsure.

Boston II also does towel rails, robe hooks, roll holders and tapware in the same three finishes.

Specifications

Construction material: Brass
Overall length: 530 mm
Projection: 133 mm
Height: 98 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Ensuite wall too short for a full length rail? The Raymor Boston II Towel Rail Single 650mm in Chrome is a straightforward single bar for one bath towel, or two hand towels side by side. The 650mm length suits an ensuite or the gap between shower screen and vanity, and it stands 72mm off the wall so the towel dries rather than sweats. It's solid brass under a chrome finish. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel, and in an 850mm length.

• 650mm single bar, the right size for one bath towel or two hand towels
• Solid brass rail that won't bow under a heavy wet towel
• Chrome finish on a round bar that sits well with curved tapware
• 72mm projection, so the rail hugs the wall in a tight space
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use tile anchors, and check for pipes before you drill.

Need more hanging space? Look at the Boston II double rails, or add a robe hook or two in the same finish.

Specifications

Construction material: Brass
Overall length: 650 mm
Projection: 72 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Hand towel draped over the tap again? The Raymor Edge II Hand Towel Rail in Black is a short, single square bar built for a hand towel beside the basin or in a powder room. At 239mm wide it slots in next to a vanity where a full rail won't fit, and it stands 72.5mm off the wall so the towel hangs freely. It's solid brass with a black finish, instructions in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome.

• 239mm bar sized for a hand towel, which fits beside a basin where a bath towel rail won't
• Solid brass construction that keeps its shape and shrugs off splashes
• Square bar in a black finish to match Edge II tapware
• 72.5mm projection, so a folded hand towel hangs clear of the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Check for pipes behind the wall next to the basin before drilling, or ask your plumber.

Team it with an Edge II robe hook, roll holder and basin mixer in the same finish.

Specifications

Construction material: Brass
Overall length: 239 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Bath sheet too big for the rail you've got? The Raymor Boston II Towel Rail Single 850mm in Black runs 850mm along the wall, wide enough for a bath sheet hung flat or three hand towels in a row. It's a single round bar in solid brass with a black finish, sitting 72mm from the wall so it stays out of the way in a walkway. Installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel, or at 650mm for a shorter wall.

• 850mm bar that takes a full bath sheet without folding it in half
• Solid brass build, so the long span stays straight under load
• Round profile in a black finish to match Boston II mixers and spouts
• 72mm projection that keeps the rail tight to the wall in a corridor or beside the bath
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with fixings at each end. On a span this long, aim for studs or use quality anchors in tile.

Boston II also does double rails, hand towel rails, robe hooks and roll holders in the same finish.

Specifications

Construction material: Brass
Overall length: 850 mm
Projection: 72 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Roll holder come away from the wall for the last time? The Raymor Projix Toilet Roll Holder in Chrome is a straightforward wall-mounted holder for a single roll. It's 175mm wide, 98mm high and projects 65mm, so it sits close to the wall and clears a swinging door in a tight toilet. The body is zinc alloy in a chrome finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Holds a single standard roll and swaps over in seconds
• 65mm projection, which keeps it tight to the wall in a narrow toilet
• Zinc alloy body with a chrome finish that matches Projix taps, rails and hooks
• Brass four-point fixings so it stays on the wall, rated for commercial toilets
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use plugs in plasterboard or tiles, and check for pipes before you drill beside the cistern.

Pair it with the Projix toilet brush and holder, robe hook and towel rails in the same finish.

Specifications

Construction material: Zinc Die Cast
Overall length: 175 mm
Projection: 65 mm
Height: 98 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Nowhere to put the shampoo except the floor of the shower? The Raymor Edge II Shelf 426mm in Black is a slim, squared shelf for the shower, above the basin or beside the bath. It's brass with a black finish, so it holds up in a wet area and wipes clean. At 426mm wide and 120mm deep there's room for a couple of bottles and a bar of soap, and at 24mm high it doesn't crowd the wall. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• 426mm wide and 120mm deep, which takes a row of shampoo bottles
• Brass build that won't rust in the shower
• Slim 24mm profile, so it looks neat under a mirror or in a niche
• Black finish that matches Edge II rails, hooks and tapware
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Anchor into studs or use proper tile plugs, and keep the load sensible. Ask your handyman or plumber if you're not sure.

Pair it with Edge II towel rails, the roll holder with shelf and square tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 426 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Standing in the shower getting harder than it used to be? The Raymor Care Folding Shower Seat 600 x 400mm in Stainless Steel bolts to the wall and folds up flat when it's not needed, so the shower still works for everyone else. The frame is 304 grade stainless steel and the seat is a UV stabilised HDPE deck with channels that drain water off. Tension hinges hold it up, and it's rated to 160kg. It measures 600mm wide, 400mm deep and 480mm high, with screws and installation instructions included. Backed by 20 years domestic on mechanical parts, 7 years commercial. Also available in Polished Stainless Steel.

• Folds up against the wall on tension hinges, so it doesn't take over a shared shower
• 304 grade stainless steel frame in a stainless steel finish that stands up to daily soaking
• HDPE seat deck with drainage channels, which won't hold water or fade in the sun
• Rated to 160kg for solid everyday support
• 20 year domestic warranty on mechanical parts, 7 years for commercial installs

A shower seat takes real weight, so it must go into studs or a reinforced wall. Have your builder or plumber fit it at a height that suits the user.

Add Care grab rails, a Care hand shower and tapware from the same range.

Specifications

Construction material: 304 Grade Stainless Steel Frame, HDPE Seat Deck
Overall length: 600 mm
Projection: 400 mm
Height: 480 mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Seat
• Stainless steel fixing screws
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Need a hook for the kids' towels at the right height? The Raymor Boston II Robe Hook in Chrome gives a towel or dressing gown its own spot on the wall, and a row at different heights sorts out a family bathroom. It's a single brass hook with a rounded profile and a chrome finish, 52mm wide, 60.5mm high and standing 71.5mm off the wall so a thick towel hangs without sliding off. Installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• One hook per towel or robe, handy behind the door or next to the shower screen
• Brass build with a rounded profile, which won't snag towels or rust
• Chrome finish that ties in with Boston II tapware and other curved ranges
• 71.5mm projection, so a heavy bath towel stays on the hook
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed. A wall plug in tiles or plasterboard is all it needs, but check for pipes first.

Boston II also does towel rails, roll holders and hand towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 52 mm
Projection: 71.5 mm
Height: 60.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Need two bath towels dry by morning, not damp by lunch? The Raymor Boston II Double Towel Rail 650mm in Chrome has two round bars side by side, so a couple of bath towels hang flat and air out properly. At 650mm wide it suits an ensuite or a smaller bathroom, and the 118mm projection keeps the front towel clear of the back one. It's solid brass in a chrome finish, with installation instructions in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel, and in an 850mm length.

• Two bars side by side, which gives each towel its own space to dry
• 650mm long, a good fit for an ensuite or the wall between the vanity and shower
• Solid brass rail in a chrome finish that handles steam day in, day out
• 118mm projection, so the front towel doesn't press against the one behind it
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs where you can, or use the right anchors for tile and plasterboard, and ask your handyman if unsure.

Match it with Boston II single rails, robe hooks and roll holders, or go for the 850mm double rail on a wider wall.

Specifications

Construction material: Brass
Overall length: 650 mm
Projection: 118 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want the loo to match the round taps in the rest of the bathroom? The Raymor Boston II Toilet Roll Holder in Chrome is a single arm holder with a rounded rail, made to sit alongside curved tapware. It's solid brass under a chrome finish, so it won't flex or rust in a damp toilet. At 159.5mm wide and 91.5mm deep it takes a standard roll, and swapping it is a one-handed job. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• Open arm design, so changing the roll takes one hand and no fiddling
• Solid brass body that stays rigid and won't corrode in a small, damp room
• Chrome finish with a rounded rail that suits Boston II and other curved tapware
• 159.5mm wide with a 91.5mm projection, which fits a full roll without crowding the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it within easy reach of the toilet and check for pipes and cables before drilling.

Match it with Boston II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 159.5 mm
Projection: 91.5 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Bath towel too big for the rail you've got? The Raymor Edge II Single Towel Rail 635mm in Chrome is a straight, square-profile rail that takes one bath towel with room to spare. It's solid brass with a chrome finish, so it won't sag or rust over the years. At 635mm wide, 24mm high and 71.5mm deep it sits close to the wall and clears a swinging door in most bathrooms. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Solid brass rail, so it stays straight under a wet bath towel
• 635mm wide, which fits a full size bath towel folded once
• 71.5mm projection that keeps the towel off the wall to dry
• Chrome finish that wipes clean and matches Edge II tapware
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use the right anchors for tile and plasterboard, and check for pipes before drilling.

Edge II also does a 785mm rail, shelves, roll holders and square tapware in the same three finishes.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.