Bathroom

Kitchen mixer dripping, stiff, or just dated? The Nero Dolce II Sink Mixer with Square Spout in Chrome is a one-hole swap for most kitchen and laundry sinks. The spout turns a right angle instead of a curve and the slim lever sits tight to the body, so it stays tidy on a busy bench. It is made from 304 stainless steel right through, with no plating to wear off. The lever opens on cold first, meaning a splash under the tap never wakes the hot water system. Out of the carton it runs a 5 star aerator at 6 litres per minute; swap in the supplied 6 star aerator (4.5 litres per minute) to trim water use further. Covered by a 15 year warranty. Also available in Matte Black, Brushed Nickel, Brushed Gold and Gun Metal.

• 304 stainless steel body and spout, so a tap that gets used all day has no plating to peel
• Square spout and slim lever that line up with a straight benchtop and splashback
• Cold start lever, which saves the hot water system firing for every quick rinse
• Two aerators supplied: 5 star 6 litres per minute fitted, 6 star 4.5 litres per minute spare, plus the spanner to change them
• Polyamide PEX flexible hoses with 1/2 inch BSP female ends, ready for standard Australian plumbing
• Chrome electroplated finish that wipes clean and keeps its shine
• 15 year warranty from Nero

Hob mounted through a single hole and made for mains pressure only, between 150 and 500kPa. Not sure what you have? Ask your plumber first. Match it to Dolce II basin mixers, wall mixers and shower sets in the same finish for a tidy whole-house look.

Specifications

WELS water efficiency: 5 star WELS rated as supplied (6 star aerator also included)
WELS water consumption: 6L/min as supplied, 4.5L/min with the included 6 star aerator
WELS registration number: T49091, T49266
Watermark certification: Watermark Licence WM-060073
Construction material: 304 Grade Stainless Steel
Finish/coating: Electroplated
Operating mechanism: Ceramic cartridge with cold start functionality
Temperature rating: Min 1℃ - Max 75℃
Operating pressure: Min 150kPa - Max 500kPa (mains pressure only)
Height to spout: 267.8mm
Spout reach: 187mm
Overall depth: 222.61mm
Warranty: 15 Years

What's In The Box

1x Sink Mixer, 1x Installation Kit, 1x Extra Aerator (6 Star 4.5L/min), 1x Aerator Spanner

Downloads

Download the specification sheet below:

Nero Dolce II Sink Mixer - Square Spout Chrome

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Nowhere to put the shampoo? A built-in niche solves that for good. The Radiant ThermaNiche 1500mm x 345mm x 90mm is a pre-fabricated recess that builds storage straight into a shower or bathroom wall. The core is one-piece high-density polystyrene, coated with a liquid-applied waterproof sealant, so you've got a ready-made waterproof substrate that's set to tile in minutes. Fit it wherever your bath and shower items need to sit, and it stays put. The construction is guaranteed never to rot, degrade or leak, which keeps moisture out of the wall for the long haul. Ten specialist fixings and screws come in the pack. Backed by a 10 year warranty, so no more bottles balancing on the tiles.

• One-piece high-density polystyrene build gives lasting strength and stability, and won't rot, degrade or leak over time
• Factory-applied liquid waterproof sealant forms a fully waterproof substrate, guarding against moisture damage in wet areas
• Ready-to-tile design means quick, straightforward installation, which cuts time on site and helps keep labour costs down
• Roomy 1500mm x 345mm x 90mm internal space holds your shower and bath essentials while keeping things tidy
• Comes with 10 specialist fixings and screws for a secure, accurate fit with no extra parts to chase up
• Covered by a 10 year warranty for added confidence

It's a simple DIY fit for a confident renovator, but check the wall build and framing suits the niche size. Need a hand? Ask your tiler or plumber before you start.

Specifications

Construction material: Polystyrene
Width: 1500mm
Height: 345mm
Depth: 90mm
Warranty: 10 years

What's In The Box

1x Thermaniche

Downloads

Download the specification sheet below:
Radiant ThermaNiche 1500mm x 345mm x 90mm

Download the installation instructions below:
Radiant ThermaNiche 1500mm x 345mm x 90mm

Warranty

Radiant products are covered by warranties of up to 10 Years*

Heated Towel Rails & Ladders

• Towel rails and ladders – 10 Year warranty
• Coating on coloured rails – 2 Year warranty

The warranty period starts on the date of purchase, but the registration is only confirmed when the online warranty form has been completed and the registration details are submitted to the online warranty database in full, checked by Radiant and written confirmation is issued.

Heated Floor Wastes & Grates

• Construction of floor wastes & grates – 7 Year warranty

The replacement warranty for the coated grates is only applicable until the date of installation. Once installed, any damage to the coatings due to the incorrect use of cleaning products, misuse or accidental damage will not be covered under warranty. See Radiant's full warranty disclosure here.

For After Sales & Service enquiries you can contact Radiant directly on (08) 9302 4140 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Renovating the bathroom and want a wall mixer that fits the Winton look? The Raymor Winton Wall Mixer in Brushed Nickel is a single lever in-wall mixer for showers and baths, and it carries the same soft curves as the rest of the Winton range. The body is DZR brass, cast as one piece with a built in wet seal area, so there's less to go wrong behind the tiles. A 35mm ceramic disc cartridge in a brass housing keeps the paddle handle smooth and stops drips before they start. It's a straightforward upgrade for a new build or a bathroom refit, and your plumber will have seen this style of body many times before. Backed by a 20 year warranty on the body, cartridge and chrome finish. Also available in Chrome and Black.

• One piece DZR brass in-wall body with a dedicated wet seal area, which cuts the chance of leaks behind the wall
• 35mm ceramic disc cartridge in a brass housing for smooth control and a long working life
• Brushed nickel electroplated finish that matches Winton basin mixers, spouts and showers
• Paddle handle that's easy to work with soapy hands
• Rated for 150 to 500kPa, so it suits most Australian homes without a pressure valve
• Winton styling carries through the range, so the bathroom looks like it was planned

Wall mounted, so it needs to go in before the tiles do. Get your plumber to check the wall depth and your water pressure first.

Pair it with Winton bath spouts, basin mixers and shower heads in the same finish.

Specifications

Construction material: DZR Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Lead free: Not Required
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Shower over the bath and sick of fiddling with the old diverter? The Raymor Sigma Wall Mixer with Diverter in Chrome handles a bath and shower from the one spot. The paddle handle sets temperature and flow, and the built-in diverter switches water between the spout and the shower head. It comes with the Ray 1 in-wall body, made as a single piece with a dedicated wet-seal area, so the part hidden in the wall is built to last. The mixer uses a ceramic disc cartridge in a brass housing for smooth, drip-free control, and the body is DZR brass under a chrome electroplated finish. You get a 20 year warranty on the cartridge, body and handle, with 5 years on PVD and electroplated finishes. Also available in Black and Brushed Nickel.

• Built-in diverter that sends water to the bath spout or the shower, so you need only one mixer on the wall
• Paddle handle for easy control of temperature and flow with one hand
• Matching Ray 1 in-wall body in the box for the rough-in
• Single piece in-wall body with a wet-seal zone to help protect the wall behind it
• Ceramic disc cartridge in a brass housing that stays smooth for years
• DZR brass body with a chrome electroplated finish and soft square styling
• 20 year warranty on the cartridge, body and handle, 5 years on PVD and electroplated finishes

Suits 150 to 500kPa water pressure and needs a bath spout and shower on the same wall. Ask your plumber to confirm the in-wall body fits your framing before you order.

Match it with a Sigma spout, shower and basin mixer in the same finish.

Specifications

Construction material: DZR Brass
Operating mechanism: Ceramic disc with brass housing
Operating pressure: 150 to 500kPa
Lead free: Not Required
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Ready to swap a pair of old wall taps for a single mixer? The Raymor Sigma Wall Mixer in Brushed Nickel controls the shower or the bath from a single paddle handle, with soft square lines that suit most modern bathrooms. In the box you get the mixer trim plus the Ray 1 in-wall body, which is cast as one piece with a dedicated wet-seal zone, so the fitting inside the wall is as solid as the bit you can see. A ceramic disc cartridge in a brass housing gives you smooth control and no drips. The body is lead free brass with a brushed nickel electroplated finish. Warranty is 20 years on the cartridge, body and handle, with 5 years on PVD and electroplated finishes. Also available in Chrome and Black.

• Single paddle handle for temperature and flow, which is easier than juggling two taps
• Ray 1 in-wall body included, so your plumber has everything for the rough-in
• One piece in-wall body with a designated wet-seal area to help keep water out of the wall cavity
• Ceramic disc cartridge in a brass housing for smooth, drip-free control
• Lead free brass construction for safer water
• Brushed nickel electroplated finish with soft square styling
• 20 year warranty on the cartridge, body and handle, 5 years on PVD and electroplated finishes

Fits inside the wall and suits 150 to 500kPa water pressure. If you want to run a bath and a shower from the same point, look at the version with a diverter instead. Ask your plumber which one your setup needs.

Finish the room with Sigma basin mixers, spouts and showers in the same finish.

Specifications

Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Wall mixer
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want the whole family happy under the one shower? The Fienza Tono Deluxe Twin Shower in Chrome gives you a 300mm overhead shower and an 80mm hand shower on the one rail. A diverter built into the top inlet lets you switch between them, and the slider sets the hand shower's height and angle, so tall and short users are both sorted. It's made from solid brass with a brass swivel joint and a stainless steel hose 1.5 metres long. Both heads are WELS 4 star: 7 litres a minute overhead and 6.5 litres a minute from the hand shower. Soft TPR nozzles wipe clean easily. It runs between 150 and 500kPa and connects to a female 1/2 inch BSP inlet. Backed by a lifetime warranty. Also available in Gun Metal, Brushed Nickel, Matte Black and Urban Brass.

• 300mm overhead shower plus a hand shower, so you can have a soak or a quick rinse
• Diverter built into the top inlet to switch heads from the one supply
• Slider adjusts the hand shower's height and angle to suit whoever's showering
• Solid brass build in a chrome finish, made to handle daily use
• Stainless steel hose, 1.5 metres long, on a brass swivel joint for easy movement
• WELS 4 star on both heads, at 7 and 6.5 litres a minute, to keep water use sensible
• Lifetime warranty for long-term peace of mind

Check your water pressure sits between 150 and 500kPa and your outlet takes a 1/2 inch BSP connection. The unit is 950mm tall, so check the wall height above your mixer.

Match it with the rest of the Tono range and a wall mixer in the same finish.

Specifications

WELS water efficiency: Overhead Shower - 4 star WELS rated, Hand Shower - 4 star WELS rated
WELS water consumption: Overhead Shower - 7L/Min, Hand shower - 6.5L/Min
WELS registration number: S17350
Watermark certification: All Fienza showers are Watermark Certified. Please note: This product may have a visible Fienza or Watermark logo.
Construction material: Brass
Spray options: 2
Finish/coating: Electroplated
Operating pressure: 150 - 500kPa
Overall height (mm): 950
Arm length: 344mm (Overhead shower); 264.6mm (Hand shower)
Projection (mm): 481
Shower head length (mm): 300mm (Overhead shower); 80mm (Hand shower)
Distance between fixing point (mm): 528.5
Warranty: Lifetime

What's In The Box

• 1 x Shower rail with overhead, slider, hand shower, shower hose, shower head, fixing kit, installation instructions

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a bath spout you can swing aside? The Fienza Tono Swivel Bath Outlet in Chrome mounts on the wall and swivels through 180°, so you can move it out of the way or aim the flow where you want it. It reaches 225mm, projects 237mm from the wall and stands 60mm high, with an aerator fitted to smooth the flow. It's made from lead-free brass and uses push-fit installation onto a female 1/2 inch BSPP inlet, which keeps the job quick for your plumber. It runs on 150 to 500kPa and is Watermark certified. Backed by a 15 year warranty, it's a simple way to update the bath without a full renovation. Also available in Urban Brass, Brushed Nickel, Gun Metal and Matte Black.

• 180° swivel so you can push it aside when getting in or cleaning
• 225mm reach to get the water well into the bath
• Aerator fitted for a smoother, less splashy flow
• Push-fit installation onto a female 1/2 inch BSPP inlet, which saves time on install
• Lead-free brass in a chrome finish that stands up to daily use
• 15 year warranty for long-term peace of mind

It's an outlet only, so you'll need a wall mixer to control it. Check your pressure is between 150 and 500kPa.

Match it with a Tono hand shower and the rest of the Tono range in the same finish.

Specifications

Watermark certification: All Fienza taps are Watermark Certified
Construction material: Brass
Operating mechanism: 35mm ceramic disc cartridge
Finish/coating: Electroplated
Operating pressure: 150 - 500kPa
Overall height (mm): 60
Spout reach (mm): 225
Spout function: Swivel
Overall Depth (mm): 237
Projection from wall (mm): 237
Warranty: 15 years

What's In The Box

• 1 x Bath spout, fixing kit, installation instructions

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a shower mixer with a bit more presence on the wall? The Fienza Kaya Up Wall Mixer Large Round Plate in Chrome has an upright pin lever set on a generous 100mm round back plate. It works for the shower or the bath, with a 35mm European ceramic disc cartridge doing the mixing, so you get smooth control of heat and flow from a single lever. The body is lead free brass, and the box includes the trim kit, in-wall body and fixing kit, ready for your plumber to rough in and fit off. Fienza backs the mixer with a 15 year warranty. It's a sensible upgrade if you're redoing the shower and want fewer handles to fiddle with. Also available in Brushed Nickel, Gun Metal, Matte Black and Urban Brass.

• Upright pin lever handle that's easy to grab with wet hands
• 100mm round back plate for a clean, finished look on the wall
• Works for shower or bath installations, so one mixer style runs through the room
• 35mm European ceramic disc cartridge for smooth, reliable mixing
• Lead free brass in a chrome finish, made for daily use
• 15 year warranty backing the mixer

The in-wall body goes in before tiling, so plan it into the renovation with your plumber.

Pair it with the rest of the Kaya range, from outlets to bath mixers, in the same finish.

Specifications

Construction material: Lead free brass
Operating mechanism: 35mm ceramic disc cartridge
Finish/coating: Electroplated
Watermark certification: all Fienza taps are watermark certified
Overall length (mm): 106
Back plate length: Ø 100mm
Warranty: 15 years

What's In The Box

• 1 x Wall mixer trim kit, in wall body, fixing kit, installation instructions

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

New shower going in? The Phoenix Kusabi SwitchMix Shower / Wall Mixer in Chrome is the complete kit: the rough-in body for inside the wall, the visible fit-off trim and the SwitchMix cartridge, all supplied together. One lever sets temperature and flow. Because it runs on SwitchMix, you can later change the visible trim to another Phoenix design or finish without breaking into the wall. It's lead free brass, 117mm high and 108mm deep, and runs on 150 to 500kPa. Warranty is 15 years on the cartridge, 7 years on the product or parts and on the finish, and 1 year on labour. Also available in Brushed Nickel, Matte Black and Brushed Carbon.

• Complete kit with rough-in body, fit-off trim and SwitchMix cartridge, so there's nothing extra to buy for the mixer
• Patented SwitchMix cartridge lets you swap the trim for a different Phoenix design or finish down the track, with no tiles lifted
• Suits any SwitchMix compatible Phoenix collection if your taste changes
• Single lever that handles temperature and flow in one movement
• Finished in chrome over lead free brass, in the squared Kusabi shape
• 15 year cartridge warranty, plus 7 years on product or parts and on the finish

Designed for 150 to 500kPa water pressure. Your plumber fits the rough-in body before tiling, then the trim goes on at fit-off.

Match it with a Kusabi vessel mixer or wall outlet in the same finish.

Specifications

WELS water efficiency: N/A
WELS water consumption: N/A
WELS registration number: N/A
Watermark certification: All Phoenix Tapware & Mixers are Watermark Certified
Construction material: Lead-Free Brass
Finish/coating: Electroplating
Temperature rating: 1 - 75°C
Operating pressure: 150 - 500kPa
Overall height: 117mm
Spout function: Fixed
Overall depth: 108mm
Warranty: 15 Year Cartridge Warranty 7 Year Product or Parts Warranty 7 Year Finish Warranty 1 Year Labour Warranty

What's In The Box

• 1x Shower / Wall Mixer, 1x Installation kit, 1x Installation instructions, 1x Warranty card

Downloads

Download the specification sheet below:

Phoenix Kusabi SwitchMix Shower / Wall Mixer - Chrome

Download the installation instructions below:

Phoenix Kusabi SwitchMix Shower / Wall Mixer - Fit-Off Kit - Chrome
Phoenix Kusabi SwitchMix Shower / Wall Mixer -Rough-In - Chrome

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Basin mixer dripping or looking dated? The Phoenix Kusabi Basin Mixer in Chrome sits low over the bowl, and one lever handles both temperature and flow. The aerator is tucked up inside the spout, so there's no nozzle sticking out to collect limescale. It's WELS 6 star at 4.5 litres a minute, and it's built from lead free brass around a 28mm ceramic disc cartridge. Kusabi is SwitchMix compatible, which means you can switch to another Phoenix look later and keep the same pipework. The range also picked up a 2025 iF Design Award. Cover runs to 15 years on the cartridge, 7 years on the product, parts and finish, and 1 year on labour. Also available in Matte Black, Brushed Carbon and Brushed Nickel.

• Single lever sets temperature and flow in one easy movement
• Aerator recessed inside the spout, so there's less to catch limescale
• WELS 6 star at 4.5 litres a minute to cut water use at the basin
• Lead free brass body and 28mm ceramic disc cartridge, with 15 years of cover on the cartridge
• Clean, squared lines in chrome that suit a simple, modern vanity
• SwitchMix compatible, so a change of style later keeps the same plumbing
• 178mm tall with 131mm to the spout and a 131mm reach

Needs 150 to 500kPa water pressure. Check the 131mm reach lands well inside your basin bowl before you buy.

Match it with the Kusabi flexible hose sink mixer and the rest of the Kusabi range.

Specifications

WELS water efficiency: 6 star WELS rated
WELS water consumption: 4.5lt/min
WELS registration number: T44013
Watermark certification: All Phoenix Tapware & Mixers are Watermark Certified
Construction material: Lead-Free Brass
Finish/coating: Electroplating
Operating mechanism: 28mm ceramic cartridge
Temperature rating: 1 - 75°C
Operating pressure: 150 - 500kPa
Overall height: 178mm
Height to spout: 131mm
Spout reach: 131mm
Spout function: Fixed
Warranty: 15 Year Cartridge Warranty 7 Year Product or Parts Warranty 7 Year Finish Warranty 1 Year Labour Warranty

What's In The Box

• 1x Basin Mixer, 1x Installation kit, 1x Installation instructions, 1x Warranty card

Downloads

Download the specification sheet below:

Phoenix Kusabi Basin Mixer - Chrome

Download the installation instructions below:

Phoenix Kusabi Basin Mixer - Chrome

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Vanity too shallow for the basin you want? The Raymor Lawson Semi Recessed Basin 500mm x 440mm in White sits half in the bench with the bowl standing proud of the front, which is how you fit a full oval basin onto a narrow cabinet. It's white vitreous china, 205mm deep, with a 5.2L bowl. There's one taphole for a basin mixer. The overflow has a chrome plated grille, and the chrome pop-up waste with hair catcher fits 32mm to 40mm plumbing. Cut-out template, plug and waste, overflow cap and installation instructions all come in the box. Covered by a 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, and 1 year on seals and labour.

• Semi recessed oval basin that overhangs the bench front, so a narrow vanity gets a full bowl
• 500mm x 440mm, 205mm deep, with a 5.2L bowl
• White vitreous china that stands up to daily scrubbing
• 1 taphole, so a basin mixer mounts on the basin
• Overflow with chrome plated grille, which drains the bowl if the plug is left in
• Chrome pop-up waste with hair catcher, compatible with 32mm to 40mm waste pipes
• Cut-out template and instructions in the box, backed by a 20 year warranty on the china

The front edge of the bench needs cutting for a semi recessed basin, so check with your joiner or plumber and use the supplied template.

Pair it with a Raymor basin mixer, or see the Lawson inset basin if your vanity has the depth.

Specifications

Construction material: Vitreous China
Colour: White
Tap holes: One taphole, suits a basin mixer
Overflow: Overflow included
Plug and waste: Included
Bowl capacity: 5.2L
Length: 500mm
Width: 440mm
Height: 205 mm
Shape: Oval
Country of origin: China
Warranty: 20 years vitreous china. 5 years plug and waste, overflow ring, chrome, PVD and electroplate finishes and fittings. 1 year seals and labour

What's In The Box

• 1 x Semi Recessed Basin
• 1 x Pop-up plug and waste
• 1 x Chrome overflow ring
• 1 x Cut-out template
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Putting a stone top on the vanity and want a flush bench? The Raymor Projix Under Counter Basin 530mm x 350mm in White mounts beneath the benchtop, so the stone runs right up to the bowl and you can wipe water straight in. It's white vitreous china, 180mm deep, with no taphole, which means your mixer sits on the bench or comes off the wall. There's an overflow with a chrome plated grille, and the chrome pop-up waste with hair catcher connects to 32mm to 40mm pipes. Plug and waste, overflow cap, basin fixing kit, cut-out template and installation instructions are all included. Backed by a 20 year warranty on the vitreous china, 5 years on the plug and waste and finishes, and 1 year on seals and labour.

• Under counter mounting, so the benchtop is flush and crumbs and water wipe straight into the bowl
• 530mm x 350mm rectangle, 180mm deep, which suits a standard vanity with a stone top
• No taphole, so you choose a bench mounted mixer or wall tapware
• White vitreous china that resists stains and cleans easily
• Overflow with chrome plated grille, which stops an overfilled bowl spilling
• Chrome pop-up waste with hair catcher for 32mm to 40mm plumbing
• Basin fixing kit and cut-out template in the box, with a 20 year warranty on the china

Under counter basins need the stone cut and polished to the template, so line up your stonemason and plumber before ordering.

Team it with a Raymor Projix wall basin set or bench mounted mixer, or see the Projix wall hung basin for a smaller room.

Specifications

Construction material: Vitreous China
Colour: White
Tap holes: No taphole, suits wall mounted tapware
Overflow: Overflow included
Plug and waste: Included
Bowl capacity: 7L
Length: 530mm
Width: 350mm
Height: 180 mm
Shape: Rectangle
Country of origin: China
Warranty: 20 years vitreous china. 5 years plug and waste, overflow ring, chrome, PVD and electroplate finishes and fittings. 1 year seals and labour

What's In The Box

• 1 x Under Counter Basin
• 1 x Pop-up plug and waste
• 1 x Chrome overflow ring
• 1 x Wall fixing kit
• 1 x Cut-out template
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Rounding off a Boston II bathroom with the small bits? The Raymor Boston II Robe Hook in Brushed Nickel gives a towel or dressing gown its own spot on the wall, and a row at different heights sorts out a family bathroom. It's a single brass hook with a rounded profile and a brushed nickel finish, 52mm wide, 60.5mm high and standing 71.5mm off the wall so a thick towel hangs without sliding off. Installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• One hook per towel or robe, handy behind the door or next to the shower screen
• Brass build with a rounded profile, which won't snag towels or rust
• Brushed nickel finish that ties in with Boston II tapware and other curved ranges
• 71.5mm projection, so a heavy bath towel stays on the hook
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed. A wall plug in tiles or plasterboard is all it needs, but check for pipes first.

Boston II also does towel rails, roll holders and hand towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 52 mm
Projection: 71.5 mm
Height: 60.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Fixing Kit
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want a brush holder fixed to the wall and off the floor? The Raymor Projix Toilet Brush & Holder in Black mounts to the wall, so the brush stays put and the floor around the pan is easy to mop. The frosted glass holder hides the brush and lifts out for a rinse, set in a zinc alloy bracket with a black finish. It's 115mm wide, 355mm high and projects 150mm, on brass four-point fixings, rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• Wall mounted, so the brush isn't kicked over and the floor stays clear for cleaning
• Frosted glass holder that hides the brush head and lifts out to rinse
• Zinc alloy bracket in a black finish to match Projix roll holders and rails
• Brass four-point fixings, rated for commercial toilets as well as home ones
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Fix it low beside the pan where the brush is handy but out of the way. Check for pipes behind the wall before drilling.

Complete the toilet with a Projix roll holder, robe hook and towel rail in the same finish.

Specifications

Construction material: Zinc
Overall length: 114 mm
Projection: 142.5 mm
Height: 370 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet brush and holder
• Fixing Kit
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

After a wider towel rail that matches round tapware? The Raymor Boston II Double Towel Rail 850mm in Brushed Nickel is the longer of the two Boston II double rails, with twin round bars across 850mm of wall. That's room for two bath sheets hung flat, or towels and a bath mat. The bars sit 118mm out from the wall, so air gets around both. It's brass all the way through with a brushed nickel finish, and installation instructions come with the rail. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• 850mm long, so two bath sheets hang flat without overlapping
• Twin bars for double the hanging space on one set of fixings
• Brass throughout in a brushed nickel finish, made to shrug off a steamy bathroom
• 118mm projection that lets air move around both towels
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long wants solid fixing, so find the studs or use good anchors in tiles.

If 850mm is too wide, the Boston II double rail also comes at 650mm, with matching single rails and hooks.

Specifications

Construction material: Brass
Overall length: 850 mm
Projection: 118 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Soap sitting in a puddle on the edge of the bath? The Raymor Projix Soap Basket in Chrome is a small wall-mounted basket that keeps a bar of soap up off the wet surfaces so it drains and lasts longer. It's 125mm square and 43mm high, which suits a shower wall, above a basin or beside the bath. The basket is zinc die cast with a chrome finish that matches Projix tapware and accessories, and installation instructions are in the box. Backed by a 5 year warranty on parts and 1 year on the finish and labour.

• Open basket design, so water drains away and the soap doesn't go to mush
• 125 x 125mm footprint that fits between tiles in a shower or over a basin
• Zinc die cast body under a chrome finish that suits Projix taps and rails
• 5 year warranty on parts, 1 year on the finish and labour

Wall mounted. In a shower, fix it where it won't catch the door, and check for pipes before you drill into tiles.

Goes with Projix showers, towel rails, robe hooks and glass shelves in Chrome.

Specifications

Construction material: Zinc Die Cast
Overall length: 125 mm
Projection: 125 mm
Height: 43 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Soap basket
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Hand towel always ending up on the vanity? The Raymor Projix Towel Ring in Chrome hangs a hand towel beside the basin where you can actually reach it. It's a zinc alloy ring with a bright chrome finish, fixed to the wall with brass four-point fixings, and it's rated for commercial use so it copes with a busy family bathroom. At 175mm wide and 190mm high it stands 65mm off the wall, enough for a folded hand towel to hang clear. Installation instructions come in the box. Backed by a 5 year warranty on parts and 1 year on the finish and labour.

• Holds a hand towel next to the basin, so it dries between uses instead of sitting in a heap
• Zinc alloy ring with a bright chrome finish that wipes clean with a damp cloth
• Brass four-point fixings, which keep the ring tight to the wall through years of tugging
• Rated for commercial use, so it's more than up to a family bathroom
• 5 year warranty on parts, 1 year on the finish and labour

Wall mounted with four fixing points. Use proper anchors in tiles or plasterboard, and check for pipes before you drill.

Pair it with Projix towel rails, robe hooks and pin lever tapware in Chrome.

Specifications

Construction material: Zinc Die Cast
Overall length: 175 mm
Projection: 65 mm
Height: 190 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Towel ring
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Family bathroom and never enough rail for everyone's towels? The Raymor Projix Double Towel Rail 930mm in Chrome is the biggest towel rail in the Projix range: two 930mm bars, one behind the other, with a 135mm projection so both towels get air. It takes two bath sheets or a family's worth of hand towels. The body is zinc alloy with a chrome finish, mounted on brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Two 930mm bars, which doubles the hanging space of a single rail
• 135mm projection that leaves a gap between the towels so they actually dry
• Zinc alloy body in a chrome finish that suits Projix tapware and showers
• Brass four-point fixings that cope with wet towels being yanked off every day
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted on four fixings. Loaded with wet towels it's heavier than it looks, so anchor into studs or use proper plugs, and ask your handyman if unsure.

Projix also does a 630mm double rail, single rails, robe hooks and a glass shelf in the same finishes.

Specifications

Construction material: Zinc Die Cast
Overall length: 930 mm
Projection: 135 mm
Height: 62 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Sick of the plastic toilet brush that tips over every time? The Raymor Projix Toilet Brush & Holder in Chrome mounts to the wall, so the brush stays put and the floor around the pan is easy to mop. The frosted glass holder hides the brush and lifts out for a rinse, set in a zinc alloy bracket with a chrome finish. It's 115mm wide, 355mm high and projects 150mm, on brass four-point fixings, rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Wall mounted, so the brush isn't kicked over and the floor stays clear for cleaning
• Frosted glass holder that hides the brush head and lifts out to rinse
• Zinc alloy bracket in a chrome finish to match Projix roll holders and rails
• Brass four-point fixings, rated for commercial toilets as well as home ones
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Fix it low beside the pan where the brush is handy but out of the way. Check for pipes behind the wall before drilling.

Complete the toilet with a Projix roll holder, robe hook and towel rail in the same finish.

Specifications

Construction material: Zinc Die Cast & Frosted Glass Holder
Overall length: 115 mm
Projection: 150 mm
Height: 355 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Toilet brush and holder
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Setting up a bathroom so a parent can stay in their own home? The Raymor Care Grab Rail Straight 450mm in Polished Stainless Steel is a 450mm straight rail in 304 grade stainless steel, sized for beside a toilet or along a shower wall. The 32mm rail stands 55mm off the wall for a full grip, and clam flanges cover the screw heads. It's 528mm wide across the flanges. Made to meet AS 1428.1:2021, it suits accessible home bathrooms and commercial fit-outs. Screws and installation instructions are included. Backed by a 20 year domestic warranty on mechanical parts, 7 years commercial. Also available in Brushed Stainless Steel.

• 450mm straight rail that gives a longer reach than a 300mm rail, handy beside a toilet or in a shower
• 304 grade stainless steel in a polished stainless steel finish, so it shrugs off steam and cleaning products
• 32mm diameter with 55mm wall clearance, which leaves room for a firm hold with a wet hand
• Clam flanges with concealed mounting, so the screws are hidden once it's on the wall
• Made to meet AS 1428.1:2021, with a 20 year domestic and 7 year commercial warranty on mechanical parts

It needs solid fixing into studs, noggins or a reinforced wall, so have a builder or plumber fit it and set the height for the person using it.

The Care range also covers 300mm and 600mm straight rails, angled rails, shower seats and tapware.

Specifications

Construction material: 304 Stainless Steel
Overall length: 582 mm
Projection: 87 mm
Height: 78 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want a shower arm with a bit more shape than a plain tube? The Raymor Rectangle Wall Curved Shower Arm in Black is the arm only, no rose, so you pair it with a Raymor shower rose sold separately. It mounts on the wall, with a rectangular body and a matching flange to cover the old hole. The gentle curve carries the rose forward over your head without a bulky elbow. It's made from brass in a two piece design, which makes lining it up on the wall easier for your plumber. Backed by a 20 year warranty on the brass arm, with 20 years on a chrome finish and 5 years on an electroplated finish, plus 1 year on seals and labour. Also available in Chrome.

• Arm and flange only, so you can pair it with whichever Raymor rose suits your bathroom
• Brass construction that holds up to years of hot water and steam
• Rectangular body and flange for a squared-off look that suits modern tiles
• Wall mounted with a curved profile that brings the rose out over you
• Two piece build, which makes it simpler for your plumber to fit and align
• Black finish that wipes clean, covered for 20 years on chrome and 5 years on electroplated colours
• Installation instructions in the box along with the flange

Wall mounted, and you'll need a Raymor shower rose to go with it. Ask your plumber to check the outlet position before you order.

Browse Raymor shower roses and the other wall and ceiling arms to build the shower you want.

Specifications

Construction material: Brass
Overall height: 255.3 mm
Overall width: 63.5 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Kids, dogs and a tall partner all sharing one shower? The Raymor Sigma Dual Shower in Black runs an overhead rose and a hand shower off a single wall outlet, with a brass diverter to switch between them. The rail is brass, the hand shower and rose are ABS, and the hose is PVC. The hand shower has 3 spray functions and slides on the rail, while the top bracket adjusts to help line up with existing fixing holes. It's WELS 3 star rated at 9 litres a minute from either head. Backed by a 20 year warranty on the brass body, rail, hose, showerhead, handpiece, slide bracket and diverter, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Brushed Nickel and Chrome.

• Overhead rose plus hand shower on one rail, which gives you a proper drench or a targeted rinse
• Brass diverter to switch between heads, built to outlast a plastic one
• 3 function hand shower on a slider, so short and tall users each get the height they want
• Adjustable rail bracket that helps line up with existing tile holes
• Brass rail with an ABS rose and hand shower, plus a 1.5m PVC hose
• Black finish that ties in with Sigma tapware and accessories
• WELS 3 star at 9 litres a minute from either head, so water use stays sensible whichever you pick

Wall mounted with a 1/2 inch BSP female inlet, so it connects to a standard shower outlet. Ask your plumber to check the outlet height before you order.

Match it with Sigma basin mixers, wall mixers and bath spouts in the same finish.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0/9.0 L/Min
WELS registration number: S18472
Construction material: Hose:PVC. Rail:Brass. Hand Shower & Shower Head:ABS. Slider:ABS. Diverter:Brass
Spray options: 3 function
Rose size: Hand Shower: Diameter 85mm x 262mm. Top Shower: Diameter 200mm
Arm reach: 425mm
Rail length: 1049mm
Rail size: 15mm x 42mm
Inlet connection: G 1/2 BSP Female Thread
Overall height: 1049 mm
Overall width: 280 mm
Warranty: 20 Years main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide bracket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals and Labour

What's In The Box

• Dual Shower
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Rose blocked up and spraying all over the screen? The Raymor Edge II Square Shower Rose 220mm in Black is a head only replacement with a clean square face, so it drops onto your existing arm and sharpens up the shower without touching the plumbing. It's ABS on a stainless steel backing plate, so it's light but doesn't flex, and the brass ball joint gives you a firm, adjustable angle. Single function, so one wide spray and nothing to gum up. WELS 3 star rated at 9.0 litres a minute. TPE nozzles wipe clean, which matters if your water's hard. Covered by a 20 year warranty on the showerhead, with the finish warranty at 20 years for Chrome and 5 years for Black. Also available in Chrome.

• Head only, so it screws onto your current 1/2in BSP arm
• 220mm square face for a wide spray that matches square tapware
• ABS with a stainless steel backing plate, which keeps it flat and light on the arm
• Brass ball joint that holds the angle you set
• Black electroplated finish that wipes clean and suits a modern fit out
• TPE nozzles you can rub to clear scale, so the spray stays even
• WELS 3 star at 9.0 litres a minute, with a 20 year warranty on the showerhead

Fits a standard 1/2in BSP arm, wall or ceiling. Ask your plumber if your arm looks non standard.

Pair it with a square Raymor ceiling or wall arm and Edge II tapware in the same finish.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18329
Construction material: ABS
Rose size: 220mm
Inlet connection: 1/2in BSP Female
Overall height: 79 mm
Overall width: 220 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Shower rose
• Install instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Household of different heights fighting over the shower head? The Raymor Armada Rail Shower 4 Function in Chrome gives you a hand shower on a sliding rail, so the kids, the tall one and whoever washes the dog can all set it where they like. The rail is 612.5mm long and fixes to the wall at centre to centre points, and the handpiece has four spray settings. Brass wall elbow and brass rail, with a plastic handpiece that's light in the hand, all chrome plated. There's a soap dish in the box too. WELS 3 star rated at 9 litres a minute. Backed by a 20 year warranty on the brass body, wall elbow, rail, hose, handpiece, slide bracket, soap dish and chrome finish, with 1 year on seals and labour.

• Sliding rail, 612.5mm long, so everyone in the house can set the height they want
• Four spray functions on a 93mm handpiece for a change from a plain spray
• Brass wall elbow and rail under chrome plating, built to last in a wet room
• Lightweight plastic handpiece that's easy to hold when rinsing kids or cleaning the screen
• Soap dish included on the rail, which saves buying one
• WELS 3 star at 9 litres a minute to keep the water bill in check
• 20 year warranty on the brass parts, rail, hose, handpiece, slide bracket and chrome finish

Wall mounted with an 18mm rail. Ask your plumber to check the existing outlet lines up with the elbow before drilling.

Pair it with Armada tapware and accessories in Chrome, or see the Armada hand shower on its own if you already have a rail.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S09542
Construction material: Brass
Spray options: 4 function
Rose size: 93mm
Rail length: 612.5mm
Rail size: 18mm
Overall height: 612 mm
Overall width: 93 mm
Country of origin: China
Warranty: 20 Years main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide bracket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals and Labour

What's In The Box

• Rail Shower
• Soap dish
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Old wall shower dribbling or crusted with scale? The Raymor Armada Wall Shower in Chrome is a fixed arm and rose in one piece, so it goes straight onto the existing outlet with no rail, hose or extra holes. The rose sits on a ball joint and swivels in any direction, which lets everyone in the house aim it where they want it. It's a single function head, so there's nothing to fiddle with. The arm reaches 235mm from the wall, enough to clear your head without hugging the tiles. The body is brass under a chrome plated finish that copes with daily cleaning. WELS 3 star rated at 9 litres a minute. Backed by a 20 year warranty on the brass body, arm, showerhead and the chrome finish, with 1 year on seals and labour.

• Fixed arm and swivel rose in a single unit, so it fits an existing wall outlet with no extra holes
• Ball joint rose that swivels in every direction for a quick change of angle
• 235mm reach from the wall, which gives you room to stand under it comfortably
• Brass construction under a chrome plated finish that stands up to years of cleaning
• Single function spray, so there is nothing to adjust and nothing to go wrong
• WELS 3 star at 9 litres a minute for a decent flow without wasting water
• 20 year warranty on the brass body, arm, showerhead and chrome finish

Wall mounted onto a standard shower outlet. Check the existing arm height suits you, and ask your plumber to fit it if you're not confident with thread tape.

Pair it with Armada tapware and accessories in Chrome to finish the room.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18590
Construction material: Brass
Arm reach: 235mm
Overall height: 235 mm
Country of origin: China
Warranty: 20 Years main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide bracket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals and Labour

What's In The Box

• Wall shower
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Three-hole basin and the old set is dripping? The Raymor Armada Lever Handle Basin Set in Chrome is a three piece set for basins with three tap holes: a hot tap, a cold tap and a gooseneck spout, all hob mounted. It's the easy fix when you don't want to cut a new single-hole vanity top just to replace a tired set. The lever handles are simple to turn, and the raised gooseneck spout leaves room to fill a jug or wash your hands without knuckles hitting the basin. It's lead free brass with a chrome electroplated finish and rated WELS 5 star at 6.0 litres a minute, so the water bill stays sensible. Backed by a 15 year warranty on the body, spout, spindles, flanges, handles, aerator and fittings, 5 years on the finish and 1 year on seals and labour.

• Three piece set, hot, cold and gooseneck spout, made for basins with three tap holes
• Hob mounted, so it sits on the vanity top like the set it's replacing
• Gooseneck spout with a raised reach, which gives you clearance for washing hands and filling cups
• Lever handles that are easy to use for kids and older hands alike
• Lead free brass body under a chrome electroplated finish, built to last
• WELS 5 star at 6.0 litres a minute for lower water use without a weak stream
• 15 year warranty on the body, spout, spindles, flanges, handles, aerator and fittings, 5 years on the finish, 1 year on seals and labour

Suits hob-mounted basins with three tap holes. Check your hole spacing matches before you buy, and ask your plumber if you're unsure.

Armada also does wall top assemblies, basin top assemblies, showers and accessories in Chrome to match.

Specifications

WELS water efficiency: 5 star
WELS registration number: T47566
Lead free: Yes
Country of origin: China
Warranty: 15 years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings. 5 years PVD and electroplate finishes. 1 year Seals and labour.

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.