All Products

Want proper hot and cold taps on your basin? The Caroma Riviere Basin Set in Brushed Bronze is a three piece set that mounts on the basin or bench: a hot tap, a cold tap and a spout in the middle. The spout stands 193mm tall, with 110mm under it and a 130mm reach. Each handle uses a 1/4 turn ceramic disc cartridge, so a short twist takes it from off to full. The body is lead free brass, every Caroma tap is leak tested, and the set gives a basin a classic heritage look. It's WELS 6 star at 4.5 litres a minute. Backed by a 20 year warranty for a long, low fuss life.

• Three piece set of hot tap, cold tap and spout for a three tap hole basin
• 193mm tall spout with a 130mm reach, which suits most vanity basins
• 1/4 turn ceramic disc cartridges for a quick, positive turn on and off
• Lead free brass construction for safer water
• WELS 6 star at 4.5 litres a minute, so you save water without thinking about it
• Brushed bronze finish to match Riviere wall sets, showers and accessories
• 20 year warranty for years of daily use

Needs a basin or bench with three tap holes and 150 to 500kPa water pressure. Measure the hole spacing on your basin before you order. It suits the Caroma Riviere Inset Basin with 3 tap holes, plus the towel ring and towel rails in the same finish.

Also available in Chrome, Brushed Nickel and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47353
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 1/4 turn ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 193mm
• Height to spout: 110mm
• Spout reach: 130mm
• Warranty: 20 Years

What's In The Box

1 x Tap set, Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Basin Set Brushed Bronze Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Plain plastic flush plate on an Invisi Series II cistern? The Caroma Riviere Invisi II Series Button in Brushed Brass is the flush plate only: the button you press on the wall for a Caroma Invisi Series II in-wall cistern. The cistern must already be installed, or bought separately, as it isn't in this box. The plate is brass, measures 210mm wide by 110mm high, and fixes with no visible screws. It also lifts off to give full service access to the cistern behind, so your plumber can get in without opening the wall. It's a quick way to bring the classic Riviere look to the toilet. Covered by a 20 year warranty.

• Flush plate for a Caroma Invisi Series II in-wall cistern, sold on its own
• Brass construction for a solid feel under your hand
• Concealed fixing, so there are no screws on show
• Full service access to the cistern through the plate opening
• 210mm wide by 110mm high to cover the cistern access hole
• Finished in brushed brass to match your Riviere tapware
• 20 year warranty

Only fits a Caroma Invisi Series II in-wall cistern. Check which cistern you have before ordering, and ask your plumber if you're not sure. Match it with Caroma Riviere basin mixers, towel rails and the towel ring in the same finish.

Also available in Chrome, Brushed Nickel and Brushed Bronze.

Specifications

• Construction material: Brass
• Finish/coating: Chromeplated
• Overall height (mm): 110
• Projection from wall (mm): 80
• Overall width (mm): 210
• Warranty: 20 Years

What's In The Box

1 x Flush Button, fixing kit, installation instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Old toilet hard to clean around the rim? The Caroma Riviere Cleanflush® Wall Faced Close Coupled Bottom Inlet Toilet Suite in Matte White pairs a wall faced pan with a cistern that sits right on top, fed from a bottom inlet. Cleanflush is rimless, so there's no rim for grime to hide under, and the flush cleans the whole bowl without splashing back. GermGard antimicrobial protection is added to help kill harmful bacteria. A universal trap suits an S trap set out from 60 to 200mm or a 185mm P trap. It's WELS 4 star with a 4.5 or 3 litre flush, averaging 3.5 litres. A soft close seat with quick release is included. Caroma backs it with a 20 year warranty.

• Rimless Cleanflush bowl with no rim to scrub under and no splashback
• GermGard antimicrobial protection to help kill harmful bacteria
• Universal trap for S trap from 60 to 200mm or P trap at 185mm, so it suits a wide range of set outs
• WELS 4 star, 4.5 or 3 litre flush with a 3.5 litre average
• Bottom inlet cistern on the pan, 870mm high overall with a 435mm pan height
• Soft close seat with quick release, so you can lift it off to clean
• Vitreous china in matte white, with a 20 year warranty

The pan projects 660mm from the wall and is 365mm wide. Measure to the centre of your waste and check you have a bottom water inlet before you order. Pair it with the Caroma Riviere Inset Basin 1 Tap Hole and a Riviere Robe Hook to tie the bathroom together.

Also available in White.

Specifications

• WELS water efficiency: WELS 4 star rated
• WELS water consumption: 4.5L/3L (3.5L Average Flush)
• WELS registration number: L47378
• Watermark certification: All Caroma toilet pans, cisterns and components are Watermark certified
• Construction material: Vitreous China
• Overall height (mm): 870
• Pan height (mm): 435
• Projection from wall (mm): 660
• Overall width (mm): 365
• Warranty: 20 Years

What's In The Box

1 x Caroma Riviere Cleanflush® Wall Faced Close Coupled Bottom Inlet Suite, seat, fixing kit, installation instructions

Downloads

Download the specification sheet below:

Caroma Riviere Cleanflush® Wall Faced Close Coupled Bottom Inlet Toilet Suite Matte White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Swapping a vanity basin and keeping it simple with one mixer? The Caroma Riviere Inset Basin with Overflow, 1 Tap Hole in Matte White sits into a cut-out in the vanity top, with a single tap hole for a basin mixer mounted on the basin. An overflow is built in to catch water if the tap gets left on. The basin is 595mm long, 450mm wide and 190mm high, with a 3.5 litre bowl. It's made from durable ceramic with a smooth, stain resistant surface that's easy to keep clean, and a flush fitting plug and waste is included. Covered by a 20 year warranty, it's a straightforward replacement for a tired basin.

• Single tap hole that takes a basin mounted mixer
• Overflow included to help stop spills if the tap is left running
• Drops into a vanity top cut-out, so it suits most standard vanities
• 595mm by 450mm by 190mm high, 3.5 litre bowl
• Easy clean ceramic with a stain resistant matte white surface
• Flush fitting plug and waste in the box
• 20 year warranty

Measure your existing cut-out before you buy, and pair it with a single hole basin mixer. The Caroma Riviere Tower Basin Mixer and towel ring suit it well.

Also available in White.

Specifications

• Construction material: Ceramic
• Finish: Matte
• Tap holes: 1 taphole, suits mixer tap mounted on basin
• Overflow: Overflow included
• Plug and waste: Plug & waste included
• Bowl Capacity (L): 3.5
• Length (mm): 595
• Width (mm): 450
• Height (mm): 190
• Product Weight: 12.38 kg
• Warranty: 20 Years

What's In The Box

1 x Inset Basin, 1 x Plug and Waste

Downloads

Download the specification sheet below:

Caroma Riviere Inset Basin with Overflow - 1 Tap Hole Matte White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a toilet that's easier to keep clean? The Caroma Riviere Cleanflush Wall Faced Close Coupled Back Entry Toilet Suite in White is the full suite: pan, close coupled cistern and a soft close seat. The cistern takes its water from the wall behind, and the wall faced pan hides the pipework. Cleanflush rimless technology washes the whole bowl with no splashback, and GermGard antimicrobial protection helps kill bacteria. A universal trap suits S trap from 60 to 200mm or P trap at 185mm. It's vitreous china, WELS 4 star with a 4.5L/3L dual flush (3.5L average). Backed by a 20 year warranty.

• Back entry cistern for a water supply that comes from the wall behind
• Cleanflush rimless bowl that cleans the whole pan with no splashback
• GermGard antimicrobial protection, so cleaning is easier
• Universal trap for S trap 60 to 200mm or P trap 185mm, which suits most set outs
• Soft close seat with quick release for easy cleaning
• WELS 4 star, 4.5L/3L dual flush with a 3.5L average
• Vitreous china in white

Pan height is 435mm and it projects 660mm from the wall. Measure your set out and check your water inlet is at the back before you order. Finish the room with Caroma Riviere basins, a basin set and towel rails.

Also available in Matte White.

Specifications

• WELS water efficiency: WELS 4 star rated
• WELS water consumption: 4.5L/3L (3.5L Average Flush)
• WELS registration number: L47378
• Watermark certification: All Caroma toilet pans, cisterns and components are Watermark certified
• Construction material: Vitreous China
• Overall height (mm): 870
• Pan height (mm): 435
• Projection from wall (mm): 660
• Overall width (mm): 365
• Warranty: 20 Years

What's In The Box

1 x Caroma Riviere Cleanflush® Wall Faced Close Coupled Back Entry Suite, seat, fixing kit, installation instructions

Downloads

Download the specification sheet below:

Caroma Riviere Cleanflush® Wall Faced Close Coupled Back Entry Toilet Suite White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want to rinse the bath with a handshower too? The Caroma Riviere Freestanding Bath Filler with Handshower in Brushed Brass stands on the floor beside a freestanding bath, with the mixer, outlet and a single function handshower all in one unit. It's 1070mm tall with 925mm under the spout and a 270mm reach to clear the bath rim. The outlet can be fixed, or set to swivel 140 or 360 degrees. A 35mm ceramic disc cartridge runs the lever, dual check valves are built in, and the body is brass. It's WELS 3 star at 9.0 litres a minute for a quicker fill. Backed by a 20 year warranty.

• Floor mounted filler for freestanding baths, with mixer and outlet in one
• 1070mm high with a 270mm reach, so the spout clears the bath rim
• Outlet can be fixed or swivel 140 or 360 degrees, which suits your layout
• Single function handshower for rinsing the bath or yourself
• 35mm ceramic disc cartridge and dual check valves
• WELS 3 star at 9.0 litres a minute
• Brass body in a brushed brass finish, covered by a 20 year warranty

Needs floor connections in place before the bath goes in, and 150 to 500kPa water pressure, so plan it with your plumber at rough-in. Pair it with a Caroma Riviere towel rail and basin mixer in the same finish.

Also available in Brushed Bronze, Brushed Nickel and Chrome.

Specifications

• WELS water efficiency: 3 star WELS rated
• WELS water consumption: 9.0L/min
• WELS registration number: S47445
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Brass
• Finish/coating: PVD
• Operating mechanism: 35mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 1070mm
• Height to spout: 925mm
• Spout reach: 270mm
• Spout function: Fixed or Swivel, 140deg/360deg rotation
• Warranty: 20 Years

What's In The Box

1 x bath filler with mixer and outlet, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Freestanding Bath Filler with Handshower Brushed Brass Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing a tired toilet with one that's easier to clean? The Caroma Riviere Cleanflush® Invisi Series II® Wall Faced Toilet Suite in White puts the Invisi Series II cistern inside the wall and leaves a wall faced pan in the room, so only the pan and flush plate show. The Cleanflush rimless bowl rinses right around with no splashback, and GermGard antimicrobial protection kills harmful bacteria. The UniTrap handles S or P trap set-ups. It's WELS 4 star with a 4.5 or 3 litre flush, averaging 3.5 litres. Pan height is 435mm and it comes out 570mm from the wall. A soft close seat with quick release is included. Backed by a 20 year warranty.

• Cleanflush rimless bowl with no rim to scrub under and no splashback
• GermGard antimicrobial protection that kills harmful bacteria, which makes cleaning easier
• Invisi Series II cistern suits in-wall, in-duct, in-ceiling or undercounter installs (undercounter needs fixed flushpipe 237222)
• UniTrap suits either an S or P trap, so one pan covers either waste position
• WELS 4 star with a 4.5 or 3 litre flush, 3.5 litres on average
• Soft close seat with quick release, so it lifts off for cleaning
• Vitreous china in white, covered by a 20 year warranty

Measure first: the pan is 435mm high, 365mm wide and projects 570mm from the wall. The cistern goes inside the wall, so this is a job for your plumber. Pair it with the Riviere Toilet Roll Holder and Hand Wall Basin.

Also available in Matte White.

Specifications

• WELS water efficiency: WELS 4 star rated
• WELS water consumption: 4.5L/3L (3.5L Average Flush)
• WELS registration number: L47377
• Watermark certification: All Caroma toilet pans, cisterns and components are Watermark certified
• Construction material: Vitreous China
• Overall height (mm): 982
• Pan height (mm): 435
• Projection from wall (mm): 570
• Overall width (mm): 365
• Warranty: 20 Years

What's In The Box

1 x Caroma Riviere Cleanflush® Invisi Series II® Wall Faced Suite, seat, fixing kit, installation instructions

Downloads

Download the specification sheet below:

Caroma Riviere Cleanflush® Invisi Series II® Wall Faced Toilet Suite White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing a close coupled toilet? The Caroma Riviere Cleanflush® Wall Faced Close Coupled Bottom Inlet Toilet Suite in White pairs a wall faced pan with a cistern that sits right on top, fed from a bottom inlet. Cleanflush is rimless, so there's no rim for grime to hide under, and the flush cleans the whole bowl without splashing back. GermGard antimicrobial protection is added to help kill harmful bacteria. A universal trap suits an S trap set out from 60 to 200mm or a 185mm P trap. It's WELS 4 star with a 4.5 or 3 litre flush, averaging 3.5 litres. A soft close seat with quick release is included. Caroma backs it with a 20 year warranty.

• Rimless Cleanflush bowl with no rim to scrub under and no splashback
• GermGard antimicrobial protection to help kill harmful bacteria
• Universal trap for S trap from 60 to 200mm or P trap at 185mm, so it suits a wide range of set outs
• WELS 4 star, 4.5 or 3 litre flush with a 3.5 litre average
• Bottom inlet cistern on the pan, 870mm high overall with a 435mm pan height
• Soft close seat with quick release, so you can lift it off to clean
• Vitreous china in white, with a 20 year warranty

The pan projects 660mm from the wall and is 365mm wide. Measure to the centre of your waste and check you have a bottom water inlet before you order. Pair it with the Caroma Riviere Inset Basin 1 Tap Hole and a Riviere Robe Hook to tie the bathroom together.

Also available in Matte White.

Specifications

• WELS water efficiency: WELS 4 star rated
• WELS water consumption: 4.5L/3L (3.5L Average Flush)
• WELS registration number: L47378
• Watermark certification: All Caroma toilet pans, cisterns and components are Watermark certified
• Construction material: Vitreous China
• Overall height (mm): 870
• Pan height (mm): 435
• Projection from wall (mm): 660
• Overall width (mm): 365
• Warranty: 20 Years

What's In The Box

1 x Caroma Riviere Cleanflush® Wall Faced Close Coupled Bottom Inlet Suite, seat, fixing kit, installation instructions

Downloads

Download the specification sheet below:

Caroma Riviere Cleanflush® Wall Faced Close Coupled Bottom Inlet Toilet Suite White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Short on space for a bath? The Caroma Riviere 1500mm Back to Wall Bath with Overflow in Matte White goes flat against the wall, saving floor space while the shaped front stays on show. It's 1500mm long, 800mm wide and 580mm high, with a 210 litre capacity. The overflow is included and the waste sits in the centre. It's sanitary grade acrylic with a stain resistant surface, and it weighs 52.2kg. Footlocker fittings are in the box, ready for your installer to fit for a more stable base. The plug and waste is sold separately, code 323060C or 323060W. Covered by a 20 year warranty.

• Back to wall design that sits flat against one wall, so it suits a smaller bathroom
• 1500mm long and 800mm wide, holding 210 litres
• Overflow included, with the waste in the centre
• Sanitary grade acrylic in matte white that resists stains
• Footlocker fittings supplied loose for extra stability
• Plug and waste sold separately (323060C or 323060W)
• 20 year warranty from Caroma

Measure your wall length and check the waste position before you order. Pair it with the Riviere Wall Basin/Bath Mixer 175mm or the Rail Shower with Overhead.

Also available in Gloss White.

Specifications

• Construction Material: Sanitary Grade Acrylic
• Weight: 52.2kg
• Overflow: Overflow included
• Plug & Waste: Sold separately
• Capacity (L): 210L
• Length: 1500mm
• Width: 800mm
• Height: 580mm
• Waste Location: Centre
• Warranty: 20 years

What's In The Box

1 x Back To Wall Bath

Downloads

Download the installation instructions below:

Caroma Riviere 1500mm Back to Wall Bath with Overflow Matte White Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a bath filler that stands on the floor? The Caroma Riviere Freestanding Bath Filler with Handshower in Brushed Nickel stands on the floor beside a freestanding bath, with the mixer, outlet and a single function handshower all in one unit. It's 1070mm tall with 925mm under the spout and a 270mm reach to clear the bath rim. The outlet can be fixed, or set to swivel 140 or 360 degrees. A 35mm ceramic disc cartridge runs the lever, dual check valves are built in, and the body is brass. It's WELS 3 star at 9.0 litres a minute for a quicker fill. Backed by a 20 year warranty.

• Floor mounted filler for freestanding baths, with mixer and outlet in one
• 1070mm high with a 270mm reach, so the spout clears the bath rim
• Outlet can be fixed or swivel 140 or 360 degrees, which suits your layout
• Single function handshower for rinsing the bath or yourself
• 35mm ceramic disc cartridge and dual check valves
• WELS 3 star at 9.0 litres a minute
• Brass body in a brushed nickel finish, covered by a 20 year warranty

Needs floor connections in place before the bath goes in, and 150 to 500kPa water pressure, so plan it with your plumber at rough-in. Pair it with a Caroma Riviere towel rail and basin mixer in the same finish.

Also available in Brushed Bronze, Brushed Brass and Chrome.

Specifications

• WELS water efficiency: 3 star WELS rated
• WELS water consumption: 9.0L/min
• WELS registration number: S47445
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Brass
• Finish/coating: PVD
• Operating mechanism: 35mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 1070mm
• Height to spout: 925mm
• Spout reach: 270mm
• Spout function: Fixed or Swivel, 140deg/360deg rotation
• Warranty: 20 Years

What's In The Box

1 x bath filler with mixer and outlet, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Freestanding Bath Filler with Handshower Brushed Nickel Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Running a single mixer on your basin? The Caroma Riviere Inset Basin 1 Tap Hole in Matte White sets into your vanity top and takes one mixer tap, mounted right on the basin. That keeps the bench clear and the install simple. Inside the 595mm by 450mm footprint is an 8.5 litre bowl, and it stands 190mm high and weighs 12.38kg. It's a non-overflow basin, and a flush fitting plug and waste is included. The ceramic has a smooth surface that's easy to clean and resists stains. A classic heritage shape suits older homes as well as new builds. Caroma backs it with a 20 year warranty.

• Single tap hole for a basin mounted mixer, so the bench stays clear
• 8.5 litre bowl in a 595mm by 450mm footprint, 190mm high
• Flush fitting plug and waste supplied for a tidy finish
• Non-overflow design
• Stain-resistant ceramic in matte white
• Inset fit that drops into a cut-out in your vanity top
• 20 year warranty from Caroma

Measure the cut-out in your vanity top before you order. Pair it with the Caroma Riviere Basin Mixer, or the taller Riviere Gooseneck Basin Mixer, in your choice of finish.

Also available in White.

Specifications

• Construction material: Ceramic
• Finish: Matte
• Tap holes: 1 taphole, suits mixer tap mounted on basin
• Overflow: Non-overflow only
• Plug and waste: Plug & waste included
• Bowl Capacity (L): 8.5
• Length (mm): 595
• Width (mm): 450
• Height (mm): 190
• Product Weight: 12.38 kg
• Warranty: 20 Years

What's In The Box

1 x Inset Basin, 1 x Plug and Waste

Downloads

Download the specification sheet below:

Caroma Riviere Inset Basin - 1 Tap Hole Matte White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Basin with three tap holes and taps that have had their day? The Caroma Riviere Basin Set in Brushed Brass is a three piece set that mounts on the basin or bench: a hot tap, a cold tap and a spout in the middle. The spout stands 193mm tall, with 110mm under it and a 130mm reach. Each handle uses a 1/4 turn ceramic disc cartridge, so a short twist takes it from off to full. The body is lead free brass, every Caroma tap is leak tested, and the set gives a basin a classic heritage look. It's WELS 6 star at 4.5 litres a minute. Backed by a 20 year warranty for a long, low fuss life.

• Three piece set of hot tap, cold tap and spout for a three tap hole basin
• 193mm tall spout with a 130mm reach, which suits most vanity basins
• 1/4 turn ceramic disc cartridges for a quick, positive turn on and off
• Lead free brass construction for safer water
• WELS 6 star at 4.5 litres a minute, so you save water without thinking about it
• Brushed brass finish to match Riviere wall sets, showers and accessories
• 20 year warranty for years of daily use

Needs a basin or bench with three tap holes and 150 to 500kPa water pressure. Measure the hole spacing on your basin before you order. It suits the Caroma Riviere Inset Basin with 3 tap holes, plus the towel ring and towel rails in the same finish.

Also available in Chrome, Brushed Bronze and Brushed Nickel.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47353
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 1/4 turn ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 193mm
• Height to spout: 110mm
• Spout reach: 130mm
• Warranty: 20 Years

What's In The Box

1 x Tap set, Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Basin Set Brushed Brass Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Swapping a built-in bath for a freestanding one? The Caroma Riviere 1500mm Freestanding Bath with Overflow in Gloss White stands away from the walls and is sized for tighter rooms at 1500mm long, 790mm wide and 580mm high. It holds 204 litres and has a built-in overflow with a centre waste. It's made from sanitary grade acrylic that resists stains and weighs 52.2kg. Footlocker fittings come in the box for extra stability, though they aren't fitted. The plug and waste is sold separately, as 323060C or 323060W. Its classic shape suits a heritage or Hamptons style bathroom. Caroma covers it with a 20 year warranty.

• 1500mm by 790mm by 580mm, a size that fits smaller bathrooms
• 204 litre capacity with a built-in overflow and centre waste
• Sanitary grade acrylic that resists stains, in gloss white
• 52.2kg empty, worth knowing before delivery day
• Footlocker fittings supplied for extra stability, ready to fit on install
• Plug and waste sold separately: 323060C or 323060W
• 20 year warranty from Caroma

Check your floor waste lines up with the centre waste, and that the 790mm width gets through your doorways. Add the Caroma Riviere Hand Shower and a Riviere Double Towel Rail 600mm for a complete bath setup.

Also available in Matte White.

Specifications

• Construction Material: Sanitary Grade Acrylic
• Weight: 52.2kg
• Overflow: Overflow included
• Plug & Waste: Sold separately
• Capacity (L): 204L
• Length: 1500mm
• Width: 790mm
• Height: 580mm
• Waste Location: Centre
• Warranty: 20 years

What's In The Box

1 x Freestanding Bath

Downloads

Download the installation instructions below:

Caroma Riviere 1500mm Freestanding Bath with Overflow Gloss White Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a kitchen tap that pulls out to rinse the whole sink? The Caroma Riviere Pull Out Sink Mixer in Chrome has a handpiece that pulls out on a braided nylon hose and retracts when you're done, so you can rinse dishes, wash the sink down or fill a bucket beside it. It stands 414mm tall with 230mm to the spout and a 235mm reach, and the spout swivels with 70 or 140 degree settings. A 35mm ceramic disc cartridge in a lead free brass body runs the single lever. It's WELS 5 star at 6.0 litres a minute, and a WELS 6 star 4.5 litre a minute aerator comes in the box too. Caroma backs it with a 20 year warranty.

• Pull out handpiece that retracts after use, handy for rinsing and filling
• Braided nylon hose built for strength and a long life
• 414mm tall with 230mm to the spout and a 235mm reach
• Swivel spout with 70 or 140 degree rotation settings
• 35mm ceramic disc cartridge in lead free brass, in a chrome finish
• WELS 5 star at 6.0 litres a minute, with an optional WELS 6 star 4.5 litre aerator supplied
• 20 year warranty from Caroma

Needs 150 to 500kPa water pressure. Leave room under the sink for the hose to move freely. If you'd rather a fixed spout, the Caroma Riviere Sink Mixer does the job, and the Riviere Basin Mixer carries the look into the bathroom.

Also available in Brushed Bronze, Brushed Nickel and Brushed Brass.

Specifications

• WELS water efficiency: 5 star WELS rated
• WELS water consumption: 6.0L/min
• WELS registration number: T47414 & T47415
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: PVD
• Operating mechanism: 35mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 414mm
• Height to spout: 230mm
• Spout reach: 235mm
• Spout function: Swivel, 70deg-140deg rotation
• Warranty: 20 Years

What's In The Box

1 x Sink Mixer, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Pull Out Sink Mixer Chrome Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a basin that sits up on the bench? The Caroma Riviere Above Counter Basin in White sits on top of your vanity or bench, so the whole bowl is on show. It's 530mm long, 370mm wide and 182mm high, with an 8.5 litre bowl. There's no tap hole, so you'll pair it with a wall mixer or a mixer mounted on the bench that's tall enough to clear the rim. It's a non overflow basin and comes with a flush fitting plug and waste. The ceramic has a smooth, stain resistant surface that wipes clean, and the shape has a classic heritage look. Backed by a 20 year warranty.

• Sits up on the counter rather than into it, so the full bowl shape is on show
• 8.5 litre bowl, 530mm by 370mm and 182mm high
• No tap hole, so it works with wall mounted or bench mounted tapware
• Non overflow design with a flush fitting plug and waste in the box
• Ceramic in white with a stain resistant surface that's easy to wipe down
• 20 year warranty from Caroma

Check your mixer height and reach clear the 182mm rim before you buy. The Riviere Mid Tower Basin Mixer or Wall Basin/Bath Mixer 175mm both suit it.

Also available in Matte White.

Specifications

• Construction material: Ceramic
• Finish: Matte
• Tap holes: No taphole, suits wall mounted or bench mounted tapware
• Overflow: Non-overflow only
• Plug and waste: Plug & waste included
• Bowl Capacity (L): 8.5
• Length (mm): 530
• Width (mm): 370
• Height (mm): 182
• Product Weight: 9.61 kg
• Warranty: 20 Years

What's In The Box

1 x Above Counter Basin, 1 x Plug and Waste

Downloads

Download the specification sheet below:

Caroma Riviere Above Counter Basin White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Old toilet running, cracked or just past it? The Caroma Riviere Cleanflush Wall Faced Close Coupled Back Entry Toilet Suite in Matte White is the full suite: pan, close coupled cistern and a soft close seat. The cistern takes its water from the wall behind, and the wall faced pan hides the pipework. Cleanflush rimless technology washes the whole bowl with no splashback, and GermGard antimicrobial protection helps kill bacteria. A universal trap suits S trap from 60 to 200mm or P trap at 185mm. It's vitreous china, WELS 4 star with a 4.5L/3L dual flush (3.5L average). Backed by a 20 year warranty.

• Back entry cistern for a water supply that comes from the wall behind
• Cleanflush rimless bowl that cleans the whole pan with no splashback
• GermGard antimicrobial protection, so cleaning is easier
• Universal trap for S trap 60 to 200mm or P trap 185mm, which suits most set outs
• Soft close seat with quick release for easy cleaning
• WELS 4 star, 4.5L/3L dual flush with a 3.5L average
• Vitreous china in matte white

Pan height is 435mm and it projects 660mm from the wall. Measure your set out and check your water inlet is at the back before you order. Finish the room with Caroma Riviere basins, a basin set and towel rails.

Also available in White.

Specifications

• WELS water efficiency: WELS 4 star rated
• WELS water consumption: 4.5L/3L (3.5L Average Flush)
• WELS registration number: L47378
• Watermark certification: All Caroma toilet pans, cisterns and components are Watermark certified
• Construction material: Vitreous China
• Overall height (mm): 870
• Pan height (mm): 435
• Projection from wall (mm): 660
• Overall width (mm): 365
• Warranty: 20 Years

What's In The Box

1 x Caroma Riviere Cleanflush® Wall Faced Close Coupled Back Entry Suite, seat, fixing kit, installation instructions

Downloads

Download the specification sheet below:

Caroma Riviere Cleanflush® Wall Faced Close Coupled Back Entry Toilet Suite Matte White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want the bench clear and the tap on the wall? The Caroma Riviere Wall Basin/Bath Mixer 210mm in Brushed Bronze is a wall set: a single lever mixer plus a separate 210mm spout, so you get one handle for temperature and flow and a long outlet that reaches well over a basin or into a bath. It's built on Caroma EasySwitch, a universal body that goes inside the wall, so your plumber can fit the body during the rough-in and you can pick the finish later. Inside is a 35mm ceramic disc cartridge, and the body is lead free brass. Flow is WELS 6 star at 4.5 litres a minute, with an unrestricted aerator in the box for faster bath fills. It's backed by a 20 year warranty.

• Mixer and 210mm spout in one pack, so the longer reach covers a bath or a deep basin
• Single lever control on a 35mm ceramic disc cartridge for smooth, steady adjustment
• Caroma EasySwitch in-wall body, which lets you install now and choose the look later
• Unrestricted aerator included for filling a bath quicker
• WELS 6 star at 4.5 litres a minute for everyday basin use
• Lead free brass construction for safer water and years of service
• Finished in brushed bronze to match other Riviere pieces in the room

Wall mounted, for 150 to 500kPa water pressure. Check the spout height and 210mm reach against your basin or bath before you buy, and ask your plumber about the in-wall body. Add a Caroma Riviere rain shower, towel rail or towel ring to carry the same finish through the bathroom.

Also available in Chrome, Brushed Brass and Brushed Nickel.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47336
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 35mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 120mm
• Spout reach: 210mm
• Overall depth: 222mm
• Warranty: 20 Years

What's In The Box

1 x Tap set, Spout, fixing kit, installation instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a wall mixer and spout in the one box? The Caroma Riviere Wall Basin/Bath Mixer 175mm in Brushed Nickel is a wall set: you get the lever mixer plus a matching spout with a 175mm reach. It works over a basin or a bath, and there's an unrestricted aerator in the pack for quicker bath fills. The body is lead free brass, and a 35mm ceramic disc cartridge handles flow and temperature from the one lever. With the standard aerator it's WELS 6 star at 4.5 litres a minute. It's built on Caroma EasySwitch, so your plumber can fit the in-wall body at rough-in and you can settle on the trim and finish later. Covered by a 20 year warranty.

• Lever mixer and 175mm spout in the one box, ready to set out on the wall
• Unrestricted aerator included, which speeds up filling a bath
• WELS 6 star at 4.5 litres a minute through the standard aerator for basin use
• 35mm ceramic disc cartridge for smooth control from a single lever
• Caroma EasySwitch in-wall system, so the body goes in first and the finish can be picked later
• Lead free brass in brushed nickel, matched to the rest of the Riviere tapware
• 20 year Caroma warranty for long term peace of mind

Wall mounted, for water pressure between 150 and 500kPa. Work out the spout position over your basin or bath before rough-in, and ask your plumber if you're unsure. It suits the Riviere Above Counter and Inset Basins, or the 1500mm Back to Wall Bath.

Also available in Chrome, Brushed Brass and Brushed Bronze.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47334
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 35mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 120mm
• Spout reach: 175mm
• Overall depth: 187mm
• Warranty: 20 Years

What's In The Box

1 x Tap set, Spout, fixing kit, installation instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Got the room for a bath that stands on its own? The Caroma Riviere 1700mm Freestanding Bath with Overflow in Matte White stands clear of the walls, so you can place it where the room works best. It's 1700mm long, 790mm wide and 580mm high, and holds 246 litres. The overflow is built in and the waste sits in the centre. It's made from sanitary grade acrylic that resists stains, with a classic heritage shape. Footlocker fittings come in the box for extra stability, though they're not fitted. The plug and waste is sold separately (323060C or 323060W), so add one to your order. Caroma backs it with a 20 year warranty.

• 1700mm long and 790mm wide for a full length soak
• 246 litre capacity with an overflow included to help stop spills
• Centre waste, so nobody has to lean back against the plug end
• Sanitary grade acrylic that resists stains
• Footlocker fittings supplied, not fitted, for a steadier install
• Plug and waste sold separately: 323060C or 323060W
• Finished in matte white and covered by a 20 year warranty

Check your floor waste lines up with the centre waste position, and plan the carry in, as it weighs 59kg. Pair it with the Riviere Bath/Shower Mixer and Wall Basin/Bath Outlet 210mm if it sits near a wall.

Also available in Gloss White.

Specifications

• Construction Material: Sanitary Grade Acrylic
• Weight: 59.0kg
• Overflow: Overflow included
• Plug & Waste: Sold separately
• Capacity (L): 246L
• Length: 1700mm
• Width: 790mm
• Height: 580mm
• Waste Location: Centre
• Warranty: 20 years

What's In The Box

1 x Freestanding Bath

Downloads

Download the installation instructions below:

Caroma Riviere 1700mm Freestanding Bath with Overflow Matte White Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want the cistern out of sight? The Caroma Riviere Cleanflush® Invisi Series II® Wall Faced Toilet Suite in Matte White puts the Invisi Series II cistern inside the wall and leaves a wall faced pan in the room, so only the pan and flush plate show. The Cleanflush rimless bowl rinses right around with no splashback, and GermGard antimicrobial protection kills harmful bacteria. The UniTrap handles S or P trap set-ups. It's WELS 4 star with a 4.5 or 3 litre flush, averaging 3.5 litres. Pan height is 435mm and it comes out 570mm from the wall. A soft close seat with quick release is included. Backed by a 20 year warranty.

• Cleanflush rimless bowl with no rim to scrub under and no splashback
• GermGard antimicrobial protection that kills harmful bacteria, which makes cleaning easier
• Invisi Series II cistern suits in-wall, in-duct, in-ceiling or undercounter installs (undercounter needs fixed flushpipe 237222)
• UniTrap suits either an S or P trap, so one pan covers either waste position
• WELS 4 star with a 4.5 or 3 litre flush, 3.5 litres on average
• Soft close seat with quick release, so it lifts off for cleaning
• Vitreous china in matte white, covered by a 20 year warranty

Measure first: the pan is 435mm high, 365mm wide and projects 570mm from the wall. The cistern goes inside the wall, so this is a job for your plumber. Pair it with the Riviere Toilet Roll Holder and Hand Wall Basin.

Also available in White.

Specifications

• WELS water efficiency: WELS 4 star rated
• WELS water consumption: 4.5L/3L (3.5L Average Flush)
• WELS registration number: L47377
• Watermark certification: All Caroma toilet pans, cisterns and components are Watermark certified
• Construction material: Vitreous China
• Overall height (mm): 982
• Pan height (mm): 435
• Projection from wall (mm): 570
• Overall width (mm): 365
• Warranty: 20 Years

What's In The Box

1 x Caroma Riviere Cleanflush® Invisi Series II® Wall Faced Suite, seat, fixing kit, installation instructions

Downloads

Download the specification sheet below:

Caroma Riviere Cleanflush® Invisi Series II® Wall Faced Toilet Suite Matte White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a basin that sets down into the benchtop? The Caroma Riviere Inset Basin - No Tap Hole in White drops into a cut-out in your vanity top, with the rim resting on the bench. With no tap hole, the mixer goes on the wall or on the bench beside it. It measures 530mm long, 370mm wide and 182mm high, with an 8.6 litre bowl. There's no overflow, and a flush fitting plug and waste is included. It's ceramic with a smooth surface that resists stains, and it has a classic heritage look that ties in with the rest of the Riviere range. Covered by a 20 year warranty.

• Inset design that drops into a cut-out in the vanity top
• No tap hole, made for a wall mixer or a mixer mounted on the bench
• 8.6 litre bowl in a 530mm by 370mm footprint
• Non overflow, with a flush fitting plug and waste supplied
• Ceramic in white that resists stains and wipes clean
• Backed by a 20 year warranty

Check the cut-out size against your benchtop before you order, and ask your plumber where the waste needs to sit. Pair it with the Riviere Wall Basin/Bath Mixer 175mm and Hand Towel Rail.

Also available in Matte White.

Specifications

• Construction material: Ceramic
• Finish: Matte
• Tap holes: No taphole, suits wall mounted or bench mounted tapware
• Overflow: Non-overflow only
• Plug and waste: Plug & waste included
• Bowl Capacity (L): 8.6
• Length (mm): 530
• Width (mm): 370
• Height (mm): 182
• Product Weight: 9.06 kg
• Warranty: 20 Years

What's In The Box

1 x Inset Basin, 1 x Plug and Waste

Downloads

Download the specification sheet below:

Caroma Riviere Inset Basin - No Tap Hole White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Old wall spout leaking or looking dated? The Caroma Riviere Wall Basin/Bath Outlet 175mm in Brushed Bronze is the spout on its own. There are no taps in the box, so you'll pair it with separate hot and cold wall taps. It comes 175mm out from the wall, which suits most basins and plenty of baths, and stands 85mm high. The body is lead free brass. As supplied it's WELS 6 star at 4.5 litres a minute, and an unrestricted aerator is included for when it's going over a bath and you want a faster fill. Its classic heritage look sits well in older homes and new builds. Caroma covers it with a 20 year warranty.

• Spout only with a 175mm reach, to run with separate hot and cold wall taps
• Works over a basin or a bath, so one outlet covers either job
• WELS 6 star at 4.5 litres a minute as supplied for lower water use
• Unrestricted aerator in the box for a quicker fill when it's over a bath
• Lead free brass body, 85mm high, built for daily use
• Brushed bronze finish to match the rest of your Riviere tapware
• 20 year warranty from Caroma

Wall mounted, for 150 to 500kPa water pressure. Measure from the wall to the centre of your basin or bath before you settle on 175mm. Team it with Caroma Riviere towel rails and a Riviere Robe Hook in the same finish, or grab the Riviere Wall Basin/Bath Set 210mm if you need the taps too.

Also available in Chrome, Brushed Nickel and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47335
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 85mm
• Spout reach: 175mm
• Warranty: 20 Years

What's In The Box

1 x Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Wall Basin/Bath Outlet 175mm Brushed Bronze Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a shower height that suits everyone in the house? The Caroma Riviere Rail Shower in Brushed Bronze puts the hand shower on a slide rail, so you can move it up or down in seconds or lift it off to rinse. It's 690mm tall overall. The mounting pillars adjust, which helps when you're retrofitting to existing holes in the wall. In the box you get the rail, slider, hand shower, hose and fixing kit. The 113mm head has one spray setting with Caroma's VJet technology. It's WELS 4 star at 7.5 litres a minute and runs on 150 to 500kPa water pressure. Brass construction, 100% leak tested, with a 20 year warranty.

• Slide rail lets you set the shower height for whoever is using it
• Adjustable mounting pillars to line up with existing holes on a retrofit
• Full kit: rail, slider, hand shower, hose and fixing kit
• 113mm head, one spray, with Caroma VJet technology
• WELS 4 star at 7.5 litres a minute
• Brass construction in a brushed bronze finish, 100% leak tested
• 20 year warranty from Caroma

Check the spacing of your existing holes against the installation instructions, and ask your plumber about the water connection. Add a Caroma Riviere Robe Hook and a Riviere Double Towel Rail 600mm in the same finish.

Also available in Brushed Brass, Brushed Nickel and Chrome.

Specifications

• WELS water efficiency: 4 star WELS rated
• WELS water consumption: 7.5L/min
• Spray options: 1
• WELS registration number: S48374
• Watermark certification: All Caroma Showers are watermark certified
• Construction material: Brass
• Operating pressure: 150 - 500kPa
• Finish/coating: PVD
• Head diameter: Ø 113mm
• Overall height: 690mm
• Warranty: 20 Years

What's In The Box

1 x Shower rail, slider, hand shower, shower hose, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Rail Shower Brushed Bronze Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need more room under the tap to wash your face? The Caroma Riviere Gooseneck Basin Mixer in Chrome has a tall, curved spout that stands 263mm overall, with 170mm to the spout and a 140mm reach. That extra height makes washing your face or filling a glass much easier. The spout swivels, and you can set it to turn a full 360 degrees, limit it to 140 degrees, or lock it in place. Inside the lead free brass body is a 35mm ceramic disc cartridge, run from a single lever. It's WELS 6 star rated at 4.5 litres a minute, so it's easy on water. SoftPEX hoses are supplied. Caroma covers it with a 20 year warranty.

• Gooseneck spout, 263mm tall with 170mm to the outlet, for plenty of room under the water
• Swivel you can set to 360 degrees, 140 degrees or fixed, so it suits how you use the basin
• 35mm ceramic disc cartridge behind a single lever for easy control
• 140mm reach that brings the water well over the bowl
• WELS 6 star at 4.5 litres a minute, which goes easy on your water bill
• Lead free brass in a chrome finish, with SoftPEX hoses in the box
• 20 year warranty from Caroma

Works on 150 to 500kPa water pressure. Check the spout height clears any shelf or mirror above the basin. Pair it with the Caroma Riviere Under Counter Basin with Overflow and a Riviere Robe Hook in the same finish.

Also available in Brushed Bronze, Brushed Nickel and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47333
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 35mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 263mm
• Height to spout: 170mm
• Spout reach: 140mm
• Warranty: 20 Years

What's In The Box

1 x Basin Mixer, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Gooseneck Basin Mixer Chrome Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Short on space but want a freestanding bath? The Caroma Riviere 1500mm Freestanding Bath with Overflow in Matte White stands away from the walls and is sized for tighter rooms at 1500mm long, 790mm wide and 580mm high. It holds 204 litres and has a built-in overflow with a centre waste. It's made from sanitary grade acrylic that resists stains and weighs 52.2kg. Footlocker fittings come in the box for extra stability, though they aren't fitted. The plug and waste is sold separately, as 323060C or 323060W. Its classic shape suits a heritage or Hamptons style bathroom. Caroma covers it with a 20 year warranty.

• 1500mm by 790mm by 580mm, a size that fits smaller bathrooms
• 204 litre capacity with a built-in overflow and centre waste
• Sanitary grade acrylic that resists stains, in matte white
• 52.2kg empty, worth knowing before delivery day
• Footlocker fittings supplied for extra stability, ready to fit on install
• Plug and waste sold separately: 323060C or 323060W
• 20 year warranty from Caroma

Check your floor waste lines up with the centre waste, and that the 790mm width gets through your doorways. Add the Caroma Riviere Hand Shower and a Riviere Double Towel Rail 600mm for a complete bath setup.

Also available in Gloss White.

Specifications

• Construction Material: Sanitary Grade Acrylic
• Weight: 52.2kg
• Overflow: Overflow included
• Plug & Waste: Sold separately
• Capacity (L): 204L
• Length: 1500mm
• Width: 790mm
• Height: 580mm
• Waste Location: Centre
• Warranty: 20 years

What's In The Box

1 x Freestanding Bath

Downloads

Download the installation instructions below:

Caroma Riviere 1500mm Freestanding Bath with Overflow Matte White Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Old wall taps stiff or dripping? The Caroma Riviere Wall Top Assemblies in Brushed Brass are a pair of hot and cold wall taps. There's no spout in the box, so team them with a Riviere wall outlet over the basin or bath. Each tap runs on a quarter turn ceramic disc cartridge, so a short twist takes you from off to full flow. They're made from lead free brass and suit a heritage style bathroom. Optional 60mm trouble dome plates are supplied, handy for covering old holes when you're replacing existing taps. Caroma leak tests its tapware and backs these with a 20 year warranty.

• Hot and cold pair only, no spout, so you choose the outlet that suits the job
• Quarter turn ceramic disc cartridges for quick, light on and off
• Optional 60mm trouble dome plates, which help tidy up old holes on a retrofit
• Lead free brass for safer drinking water
• Finished in brushed brass to match the Riviere outlet and accessories
• Rated for 150 to 500kPa and covered by a 20 year warranty

Check the spacing of your existing tap holes before you order, and ask your plumber if you're unsure. Pair them with the Riviere Wall Basin/Bath Outlet 210mm in the same finish.

Also available in Chrome, Brushed Bronze and Brushed Nickel.

Specifications

• WELS water efficiency: N/A
• WELS water consumption: N/A
• WELS registration number: N/A
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 1/4 turn ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 60mm
• Warranty: 20 Years

What's In The Box

1 x set hot and cold taps, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Wall Top Assemblies Brushed Brass Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Tired of a shower head that dribbles? The Caroma Riviere Rain Shower 250mm in Chrome is a wide overhead head that spreads water across a 250mm face, so you're under the flow rather than dodging it. It's a single spray setting, made from stainless steel, and every Caroma shower is leak tested. Height is 100mm, so it sits neatly on your existing shower arm. It's WELS 4 star rated at 7.5 litres a minute, which keeps hot water use in check. You get the head and a fixing kit in the box; the arm or ceiling dropper is a separate buy. Backed by a 20 year warranty.

• 250mm head diameter for wide, even coverage
• Stainless steel construction that stands up to the wet
• Single spray function, so there's nothing to fiddle with
• WELS 4 star at 7.5 litres a minute to keep water and gas bills down
• In the chrome finish to match Riviere wall mixers and taps
• 20 year warranty for long term peace of mind

Head only: fits to a shower arm or ceiling dropper you already have or buy separately. Works between 150 and 500kPa; ask your plumber if your pressure is low. Pair it with the Caroma Riviere Wall Mixer 210mm or Wall Set 175mm for the controls.

Also available in Brushed Nickel, Brushed Brass and Brushed Bronze.

Specifications

• WELS water efficiency: 4 star WELS rated
• WELS water consumption: 7.5L/min
• Spray options: 1
• WELS registration number: S48376
• Watermark certification: All Caroma Showers are watermark certified
• Construction material: Stainless Steel
• Operating pressure: 150 - 500kPa
• Finish/coating: PVD
• Head diameter: Ø 250mm
• Overall height: 100mm
• Warranty: 20 Years

What's In The Box

1 x Shower head, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Rain Shower 250mm Chrome Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Swapping out a tired basin tap? The Caroma Riviere Mid Tower Basin Mixer in Brushed Nickel gives you extra height without going to a full tower. It stands 235mm overall with 133mm under the spout and a 145mm reach, so there's room to wash your hands or rinse a razor without knocking the bowl. It has a classic heritage look and simple single lever control. The body is lead free brass, and a 25mm ceramic disc cartridge does the mixing. It's WELS 6 star rated at 4.5 litres a minute, so water use stays low. It connects with SoftPEX hoses, and the fixing kit comes in the box. Caroma covers it with a 20 year warranty.

• 235mm tall with 133mm under the spout, so there's more clearance than a standard basin mixer
• 145mm spout reach that brings the water out over the bowl
• Lead free brass body for safer drinking water
• 25mm ceramic disc cartridge for smooth single lever control
• WELS 6 star at 4.5 litres a minute, which keeps water and hot water bills down
• Finished in brushed nickel to match the rest of the Riviere tapware and accessories
• Caroma leak tests every tap, and this one carries a 20 year warranty

Check your basin or bench has a tap hole for it, and that your pressure sits between 150 and 500kPa. Ask your plumber if you're not sure. Pair it with the Riviere Hand Towel Rail, Toilet Roll Holder and Bathroom Shelf in the same finish.

Also available in Chrome, Brushed Bronze and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47330
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 25mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 235mm
• Height to spout: 133mm
• Spout reach: 145mm
• Warranty: 20 Years

What's In The Box

1 x Basin Mixer, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Mid Tower Basin Mixer Brushed Nickel Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want an overhead rain head and a handshower in one? The Caroma Riviere Compact Twin Shower in Chrome puts a 250mm overhead shower and a handshower on a rail, all on one compact frame. A built-in diverter switches between the two. The handshower uses VJet technology, and the silverflex hose is smooth and easy to wipe clean. It has a top inlet, which makes it easier to fit where an old shower arm comes out of the wall. The arm reaches 400mm and the unit stands 495mm tall. It's brass and leak tested, with each head WELS 4 star at 7.5 litres a minute. Backed by a 20 year warranty.

• 250mm overhead head plus a rail mounted handshower on the one frame
• Integrated diverter to switch between overhead and hand shower
• Top inlet, so it suits a retrofit onto an existing wall outlet
• 400mm arm reach and 495mm overall height
• VJet handshower with a smooth silverflex hose that's easy to clean
• WELS 4 star at 7.5 litres a minute on each head
• Brass construction in a chrome finish, with a 20 year warranty

Works between 150 and 500kPa. Check the height of your existing outlet and ceiling clearance first, and ask your plumber if you're unsure. Add a Caroma Riviere Wall Mixer 210mm or Wall Set 175mm to control it.

Also available in Brushed Bronze, Brushed Brass and Brushed Nickel.

Specifications

• WELS water efficiency: 4 star WELS rated - Overhead Shower, 4 star WELS rated - Hand Shower
• WELS water consumption: 7.5L/min - Overhead shower, 7.5L/min - Hand shower
• Spray options: 1
• WELS registration number: S48373
• Watermark certification: All Caroma Showers are watermark certified
• Construction material: Brass
• Shower arm reach: 400mm
• Operating pressure: 150 - 500kPa
• Finish/coating: PVD
• Head diameter: Ø 250mm
• Overall height: 495mm
• Warranty: 20 Years

What's In The Box

1 x Overhead shower arm, handshower, shower head, shower hose, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Compact Twin Shower Chrome Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a handshower and an overhead in one kit? The Caroma Riviere Rail Shower with Overhead in Brushed Bronze gives you a 250mm overhead and a handshower that slides up and down the rail, with a built-in diverter to swap between them. The handshower uses Caroma VJet technology and has one spray setting. Both the overhead and handshower are WELS 4 star at 7.5 litres a minute. The top inlet and adjustable bottom pillar help it line up with existing holes, which makes it a good fit for a renovation. It's brass and leak tested, and the silverflex hose is smooth and easy to wipe down. Overall height is 1298mm with a 400mm arm. Backed by a 20 year warranty.

• 250mm overhead plus a handshower on a slider, so you can choose a full soak or a quick rinse
• Integrated diverter to move water between the overhead and handshower
• WELS 4 star at 7.5 litres a minute on both the overhead and the handshower
• Top inlet and adjustable bottom mounting pillar, so it can use existing holes on a retrofit
• Silverflex hose that's smooth to clean and built to last
• Brass construction in brushed bronze
• 400mm arm, 1298mm overall height and a 20 year warranty

Check your ceiling height and that your water pressure sits between 150 and 500kPa. Pair it with the Riviere Bath/Shower Mixer and Bathroom Shelf in the same finish.

Also available in Brushed Brass, Brushed Nickel and Chrome.

Specifications

• WELS water efficiency: 4 star WELS rated - Overhead Shower, 4 star WELS rated - Hand Shower
• WELS water consumption: 7.5L/min - Overhead shower, 7.5L/min - Hand shower
• Spray options: 1
• WELS registration number: S48372
• Watermark certification: All Caroma Showers are watermark certified
• Construction material: Brass
• Shower arm reach: 400mm
• Operating pressure: 150 - 500kPa
• Finish/coating: PVD
• Head diameter: Ø 250mm
• Overall height: 1298mm
• Warranty: 20 Years

What's In The Box

1 x Shower rail with overhead, slider, hand shower, shower hose, shower head, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Rail Shower with Overhead Brushed Bronze Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want an overhead rain head and a handshower in one? The Caroma Riviere Compact Twin Shower in Brushed Bronze puts a 250mm overhead shower and a handshower on a rail, all on one compact frame. A built-in diverter switches between the two. The handshower uses VJet technology, and the silverflex hose is smooth and easy to wipe clean. It has a top inlet, which makes it easier to fit where an old shower arm comes out of the wall. The arm reaches 400mm and the unit stands 495mm tall. It's brass and leak tested, with each head WELS 4 star at 7.5 litres a minute. Backed by a 20 year warranty.

• 250mm overhead head plus a rail mounted handshower on the one frame
• Integrated diverter to switch between overhead and hand shower
• Top inlet, so it suits a retrofit onto an existing wall outlet
• 400mm arm reach and 495mm overall height
• VJet handshower with a smooth silverflex hose that's easy to clean
• WELS 4 star at 7.5 litres a minute on each head
• Brass construction in a brushed bronze finish, with a 20 year warranty

Works between 150 and 500kPa. Check the height of your existing outlet and ceiling clearance first, and ask your plumber if you're unsure. Add a Caroma Riviere Wall Mixer 210mm or Wall Set 175mm to control it.

Also available in Brushed Brass, Brushed Nickel and Chrome.

Specifications

• WELS water efficiency: 4 star WELS rated - Overhead Shower, 4 star WELS rated - Hand Shower
• WELS water consumption: 7.5L/min - Overhead shower, 7.5L/min - Hand shower
• Spray options: 1
• WELS registration number: S48373
• Watermark certification: All Caroma Showers are watermark certified
• Construction material: Brass
• Shower arm reach: 400mm
• Operating pressure: 150 - 500kPa
• Finish/coating: PVD
• Head diameter: Ø 250mm
• Overall height: 495mm
• Warranty: 20 Years

What's In The Box

1 x Overhead shower arm, handshower, shower head, shower hose, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Compact Twin Shower Brushed Bronze Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a shower you can take off the wall? The Caroma Riviere Hand Shower in Chrome comes as a kit with the hand shower, a wall bracket and a shower hose. Hold the spray right where you need it, or leave it parked on the bracket for an everyday shower. The 113mm head has a single spray pattern and uses Caroma's VJet spray technology. It measures 287mm overall and is made from stainless steel. It's WELS 4 star rated at 7.5 litres a minute, and it runs on water pressure between 150 and 500kPa. It works just as well over a bath as in the shower. Caroma covers it with a 20 year warranty, and it's 100% leak tested before it leaves them.

• Kit includes the hand shower, wall bracket and hose, ready to fit
• 113mm head with one spray setting and Caroma VJet technology
• WELS 4 star at 7.5 litres a minute
• Lift it off the bracket to rinse hair, kids or the shower walls
• Stainless steel construction in a chrome finish
• Suits 150 to 500kPa water pressure, so check yours first
• 20 year warranty from Caroma

The hose needs a wall connection to feed it, so ask your plumber if you're replacing a fixed shower head. For a height you can adjust, see the Caroma Riviere Rail Shower, or pair this with the Riviere Wall Basin/Bath Set 210mm over a bath.

Also available in Brushed Nickel, Brushed Brass and Brushed Bronze.

Specifications

• WELS water efficiency: 4 star WELS rated
• WELS water consumption: 7.5L/min
• Spray options: 1
• WELS registration number: S48375
• Watermark certification: All Caroma Showers are watermark certified
• Construction material: Stainless steel
• Shower arm reach: 227mm
• Operating pressure: 150 - 500kPa
• Finish/coating: Chromeplated
• Head diameter: Ø 113mm
• Overall height: 287mm
• Warranty: 20 Years

What's In The Box

1 x Hand shower, wall bracket, shower hose, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Hand Shower Chrome Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages