All Products

Three hole basin needing a matching tap set? The Caroma Riviere Basin Set in Brushed Nickel is a three piece set that mounts on the basin or bench: a hot tap, a cold tap and a spout in the middle. The spout stands 193mm tall, with 110mm under it and a 130mm reach. Each handle uses a 1/4 turn ceramic disc cartridge, so a short twist takes it from off to full. The body is lead free brass, every Caroma tap is leak tested, and the set gives a basin a classic heritage look. It's WELS 6 star at 4.5 litres a minute. Backed by a 20 year warranty for a long, low fuss life.

• Three piece set of hot tap, cold tap and spout for a three tap hole basin
• 193mm tall spout with a 130mm reach, which suits most vanity basins
• 1/4 turn ceramic disc cartridges for a quick, positive turn on and off
• Lead free brass construction for safer water
• WELS 6 star at 4.5 litres a minute, so you save water without thinking about it
• Brushed nickel finish to match Riviere wall sets, showers and accessories
• 20 year warranty for years of daily use

Needs a basin or bench with three tap holes and 150 to 500kPa water pressure. Measure the hole spacing on your basin before you order. It suits the Caroma Riviere Inset Basin with 3 tap holes, plus the towel ring and towel rails in the same finish.

Also available in Chrome, Brushed Bronze and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47353
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 1/4 turn ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 193mm
• Height to spout: 110mm
• Spout reach: 130mm
• Warranty: 20 Years

What's In The Box

1 x Tap set, Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Basin Set Brushed Nickel Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Got a tall vessel basin that needs a taller tap? The Caroma Riviere Tower Basin Mixer in Chrome lifts the spout well clear of the bowl, standing 303mm tall with 155mm under the spout and a 200mm reach. One lever runs hot and cold through a 25mm ceramic disc cartridge. The body is lead free brass, and SoftPEX hoses come fitted for a durable, clean connection. It carries a classic heritage look that suits older homes and new builds alike. Water use stays low at WELS 6 star, 4.5 litres a minute, and every Caroma tap is leak tested before it leaves the factory. You're covered by a 20 year warranty, so it's a set and forget swap.

• 303mm overall height with 155mm to the spout, so it clears vessel and above counter basins
• 200mm spout reach that lands water in the middle of the bowl
• Single lever on a 25mm ceramic disc cartridge for easy one hand control
• Lead free brass body for safer drinking water and a long life
• WELS 6 star at 4.5 litres a minute, which keeps water and energy bills down
• SoftPEX hoses supplied, ready for your plumber to connect
• The chrome finish matches the rest of the Riviere tapware and accessories

Mounts on the bench or basin through a single tap hole and works between 150 and 500kPa. Measure your basin height first so the spout sits where you want it. Pair it with a Caroma Riviere towel ring, towel rail or wall mixer in the same finish.

Also available in Brushed Bronze, Brushed Nickel and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47332
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 25mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 303mm
• Height to spout: 155mm
• Spout reach: 200mm
• Warranty: 20 Years

What's In The Box

1 x Basin Mixer, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Tower Basin Mixer Chrome Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a basin that leaves the floor clear? The Caroma Riviere Hand Wall Basin in White is a compact wall hung basin, so the floor underneath stays clear and easy to clean. It's 530mm long, only 180mm wide and 325mm high, which suits a narrow powder room, toilet or small ensuite. The bowl holds 5.2 litres, and there's one tap hole for a mixer mounted on the basin. It's a non overflow basin, and a flush fitting plug and waste comes in the box. It's made from ceramic with a smooth surface that resists stains, offered in gloss or matte white. Caroma covers it with a 20 year warranty.

• Wall hung design that keeps the floor clear for easier cleaning
• 530mm long, 180mm wide and 325mm high, sized for tight spots
• One tap hole for a mixer mounted on the basin
• Non overflow bowl with a flush fitting plug and waste included
• Ceramic in white with a smooth surface that resists stains
• 5.2 litre bowl and a 20 year warranty

It weighs 14.18kg, so make sure the wall can take it, and ask your plumber about the waste position before you buy. Pair it with the Riviere Mid Tower Basin Mixer and Hand Towel Rail.

Also available in Matte White.

Specifications

• Construction material: Ceramic
• Finish: Matte
• Tap holes: 1 taphole, suits mixer tap mounted on basin
• Overflow: Non-overflow only
• Plug and waste: Plug & waste included
• Bowl Capacity (L): 5.2
• Length (mm): 530
• Width (mm): 180
• Height (mm): 325
• Product Weight: 14.18 kg
• Warranty: 20 Years

What's In The Box

1 x Wall Hung Basin, 1 x Plug and Waste

Downloads

Download the specification sheet below:

Caroma Riviere Hand Wall Basin White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Standard basin mixer sitting too low over your basin? The Caroma Riviere Mid Tower Basin Mixer in Chrome gives you extra height without going to a full tower. It stands 235mm overall with 133mm under the spout and a 145mm reach, so there's room to wash your hands or rinse a razor without knocking the bowl. It has a classic heritage look and simple single lever control. The body is lead free brass, and a 25mm ceramic disc cartridge does the mixing. It's WELS 6 star rated at 4.5 litres a minute, so water use stays low. It connects with SoftPEX hoses, and the fixing kit comes in the box. Caroma covers it with a 20 year warranty.

• 235mm tall with 133mm under the spout, so there's more clearance than a standard basin mixer
• 145mm spout reach that brings the water out over the bowl
• Lead free brass body for safer drinking water
• 25mm ceramic disc cartridge for smooth single lever control
• WELS 6 star at 4.5 litres a minute, which keeps water and hot water bills down
• Finished in chrome to match the rest of the Riviere tapware and accessories
• Caroma leak tests every tap, and this one carries a 20 year warranty

Check your basin or bench has a tap hole for it, and that your pressure sits between 150 and 500kPa. Ask your plumber if you're not sure. Pair it with the Riviere Hand Towel Rail, Toilet Roll Holder and Bathroom Shelf in the same finish.

Also available in Brushed Bronze, Brushed Nickel and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47330
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 25mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 235mm
• Height to spout: 133mm
• Spout reach: 145mm
• Warranty: 20 Years

What's In The Box

1 x Basin Mixer, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Mid Tower Basin Mixer Chrome Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want the bench clear and the tap on the wall? The Caroma Riviere Wall Basin/Bath Mixer 210mm in Chrome is a wall set: a single lever mixer plus a separate 210mm spout, so you get one handle for temperature and flow and a long outlet that reaches well over a basin or into a bath. It's built on Caroma EasySwitch, a universal body that goes inside the wall, so your plumber can fit the body during the rough-in and you can pick the finish later. Inside is a 35mm ceramic disc cartridge, and the body is lead free brass. Flow is WELS 6 star at 4.5 litres a minute, with an unrestricted aerator in the box for faster bath fills. It's backed by a 20 year warranty.

• Mixer and 210mm spout in one pack, so the longer reach covers a bath or a deep basin
• Single lever control on a 35mm ceramic disc cartridge for smooth, steady adjustment
• Caroma EasySwitch in-wall body, which lets you install now and choose the look later
• Unrestricted aerator included for filling a bath quicker
• WELS 6 star at 4.5 litres a minute for everyday basin use
• Lead free brass construction for safer water and years of service
• Finished in chrome to match other Riviere pieces in the room

Wall mounted, for 150 to 500kPa water pressure. Check the spout height and 210mm reach against your basin or bath before you buy, and ask your plumber about the in-wall body. Add a Caroma Riviere rain shower, towel rail or towel ring to carry the same finish through the bathroom.

Also available in Brushed Brass, Brushed Nickel and Brushed Bronze.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47336
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 35mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 120mm
• Spout reach: 210mm
• Overall depth: 222mm
• Warranty: 20 Years

What's In The Box

1 x Tap set, Spout, fixing kit, installation instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Got a tall vessel basin that needs a taller tap? The Caroma Riviere Tower Basin Mixer in Brushed Brass lifts the spout well clear of the bowl, standing 303mm tall with 155mm under the spout and a 200mm reach. One lever runs hot and cold through a 25mm ceramic disc cartridge. The body is lead free brass, and SoftPEX hoses come fitted for a durable, clean connection. It carries a classic heritage look that suits older homes and new builds alike. Water use stays low at WELS 6 star, 4.5 litres a minute, and every Caroma tap is leak tested before it leaves the factory. You're covered by a 20 year warranty, so it's a set and forget swap.

• 303mm overall height with 155mm to the spout, so it clears vessel and above counter basins
• 200mm spout reach that lands water in the middle of the bowl
• Single lever on a 25mm ceramic disc cartridge for easy one hand control
• Lead free brass body for safer drinking water and a long life
• WELS 6 star at 4.5 litres a minute, which keeps water and energy bills down
• SoftPEX hoses supplied, ready for your plumber to connect
• The brushed brass finish matches the rest of the Riviere tapware and accessories

Mounts on the bench or basin through a single tap hole and works between 150 and 500kPa. Measure your basin height first so the spout sits where you want it. Pair it with a Caroma Riviere towel ring, towel rail or wall mixer in the same finish.

Also available in Chrome, Brushed Bronze and Brushed Nickel.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47332
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 25mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 303mm
• Height to spout: 155mm
• Spout reach: 200mm
• Warranty: 20 Years

What's In The Box

1 x Basin Mixer, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Tower Basin Mixer Brushed Brass Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Bath going hard up against the wall? The Caroma Riviere 1500mm Back to Wall Bath with Overflow in Gloss White goes flat against the wall, saving floor space while the shaped front stays on show. It's 1500mm long, 800mm wide and 580mm high, with a 210 litre capacity. The overflow is included and the waste sits in the centre. It's sanitary grade acrylic with a stain resistant surface, and it weighs 52.2kg. Footlocker fittings are in the box, ready for your installer to fit for a more stable base. The plug and waste is sold separately, code 323060C or 323060W. Covered by a 20 year warranty.

• Back to wall design that sits flat against one wall, so it suits a smaller bathroom
• 1500mm long and 800mm wide, holding 210 litres
• Overflow included, with the waste in the centre
• Sanitary grade acrylic in gloss white that resists stains
• Footlocker fittings supplied loose for extra stability
• Plug and waste sold separately (323060C or 323060W)
• 20 year warranty from Caroma

Measure your wall length and check the waste position before you order. Pair it with the Riviere Wall Basin/Bath Mixer 175mm or the Rail Shower with Overhead.

Also available in Matte White.

Specifications

• Construction Material: Sanitary Grade Acrylic
• Weight: 52.2kg
• Overflow: Overflow included
• Plug & Waste: Sold separately
• Capacity (L): 210L
• Length: 1500mm
• Width: 800mm
• Height: 580mm
• Waste Location: Centre
• Warranty: 20 years

What's In The Box

1 x Back To Wall Bath

Downloads

Download the installation instructions below:

Caroma Riviere 1500mm Back to Wall Bath with Overflow Gloss White Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a full size bath that hugs the wall? The Caroma Riviere 1700mm Back to Wall Bath with Overflow in Gloss White sits flat against the wall with a finished front on show, so there's no hob or tiled surround to build. It's 1700mm long, 800mm wide and 580mm high, and holds 253 litres. The bath is sanitary grade acrylic, which is stain resistant and warm to the touch. An overflow is built in, the waste sits in the centre, and footlocker fittings come in the box for extra stability (not fitted). The plug and waste is sold separately. It weighs 59kg. Backed by a 20 year warranty.

• Back to wall design with a finished front, so there's no hob to build
• 1700mm long, 800mm wide and 580mm high, holding 253 litres
• Overflow included to help stop the bath spilling over
• Centre waste location
• Stain resistant sanitary grade acrylic in gloss white
• Footlocker fittings supplied for extra stability, ready for your installer to fit
• 20 year warranty

Plug and waste is not included: add 323060C or 323060W. Measure your wall and check the waste position lines up before you buy. Pair it with the Caroma Riviere Wall Set 175mm or Wall Mixer 210mm for filling.

Also available in Matte White.

Specifications

• Construction Material: Sanitary Grade Acrylic
• Weight: 59.0kg
• Overflow: Overflow included
• Plug & Waste: Sold separately
• Capacity (L): 253L
• Length: 1700mm
• Width: 800mm
• Height: 580mm
• Waste Location: Centre
• Warranty: 20 years

What's In The Box

1 x Back To Wall Bath

Downloads

Download the installation instructions below:

Caroma Riviere 1700mm Back to Wall Bath with Overflow Gloss White Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a basin that sits under the benchtop? The Caroma Riviere Under Counter Basin in Matte White mounts beneath the benchtop, so you can wipe spills straight into the bowl with no rim on top to catch grime. It has no tap hole, which means your mixer goes on the wall or through the bench. There's no overflow either. The bowl holds 8.5 litres and the basin measures 590mm long, 434mm wide and 182mm deep, at 9.1kg. It's made from durable ceramic with a smooth, stain resistant surface, and a flush fitting plug and waste is in the box. Backed by a 20 year warranty.

• Under counter mounting for a clean benchtop edge that's easy to wipe
• No tap hole, so your tap goes on the wall or through the bench
• Non-overflow design, which pairs with a non-overflow waste
• 8.5 litre bowl, 590mm by 434mm by 182mm deep
• Durable ceramic with a stain resistant matte white surface
• Flush fitting plug and waste included
• 20 year warranty

Needs a solid benchtop with a cut-out made to suit, so get your stonemason or cabinet maker the dimensions first. Top it with a Caroma Riviere Tower Basin Mixer or Wall Mixer 210mm.

Also available in White.

Specifications

• Construction material: Ceramic
• Finish: Matte
• Tap holes: No taphole, suits wall mounted or bench mounted tapware
• Overflow: Non-overflow only
• Plug and waste: Plug & waste included
• Bowl Capacity (L): 8.5
• Length (mm): 590
• Width (mm): 434
• Height (mm): 182
• Product Weight: 9.1 kg
• Warranty: 20 Years

What's In The Box

1 x Under Counter Basin, 1 x Plug and Waste

Downloads

Download the specification sheet below:

Caroma Riviere Under Counter Basin Matte White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Running a shower and a bath spout off one mixer? The Caroma Riviere Bath/Shower Mixer with Diverter in Brushed Bronze is a wall mixer for set-ups with two outlets, such as a shower over a bath. The lever sets flow and temperature, and a rotating diverter sends the water to one outlet or the other. A 35mm ceramic disc cartridge sits inside a brass body. It stands 188mm high with a 110mm depth. It uses Caroma EasySwitch, so the in-wall body can be fitted during the rough-in and the trim picked later. It's rated between 150 and 500kPa. Caroma leak tests its tapware and backs this mixer with a 20 year warranty.

• Rotating diverter that switches water between two outlets
• Single lever for flow and temperature, separate from the diverter
• 35mm ceramic disc cartridge for smooth control
• Caroma EasySwitch, so your plumber can rough in now and you can pick the finish later
• Brass body in brushed bronze, matched to Riviere showers and spouts
• 188mm high, rated 150 to 500kPa, with a 20 year warranty

Check you have two outlets plumbed, like a shower and a bath spout, before choosing this over the standard mixer. Pair it with the Riviere Wall Basin/Bath Outlet 210mm and 1500mm Back to Wall Bath.

Also available in Brushed Nickel, Brushed Brass and Chrome.

Specifications

• WELS water efficiency: N/A
• WELS water consumption: N/A
• WELS registration number: N/A
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Brass
• Finish/coating: PVD
• Operating mechanism: 35mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 188mm
• Overall depth: 110mm
• Warranty: 20 Years

What's In The Box

1 x Wall mixer, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Bath/Shower Mixer with Diverter Brushed Bronze Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

After a classic two tap setup on the wall? The Caroma Riviere Wall Top Assemblies in Brushed Nickel are a pair of hot and cold wall taps. There's no spout in the box, so team them with a Riviere wall outlet over the basin or bath. Each tap runs on a quarter turn ceramic disc cartridge, so a short twist takes you from off to full flow. They're made from lead free brass and suit a heritage style bathroom. Optional 60mm trouble dome plates are supplied, handy for covering old holes when you're replacing existing taps. Caroma leak tests its tapware and backs these with a 20 year warranty.

• Hot and cold pair only, no spout, so you choose the outlet that suits the job
• Quarter turn ceramic disc cartridges for quick, light on and off
• Optional 60mm trouble dome plates, which help tidy up old holes on a retrofit
• Lead free brass for safer drinking water
• Finished in brushed nickel to match the Riviere outlet and accessories
• Rated for 150 to 500kPa and covered by a 20 year warranty

Check the spacing of your existing tap holes before you order, and ask your plumber if you're unsure. Pair them with the Riviere Wall Basin/Bath Outlet 210mm in the same finish.

Also available in Chrome, Brushed Bronze and Brushed Brass.

Specifications

• WELS water efficiency: N/A
• WELS water consumption: N/A
• WELS registration number: N/A
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 1/4 turn ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 60mm
• Warranty: 20 Years

What's In The Box

1 x set hot and cold taps, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Wall Top Assemblies Brushed Nickel Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a full length soak in the middle of the room? The Caroma Riviere 1700mm Freestanding Bath with Overflow in Gloss White stands clear of the walls, so you can place it where the room works best. It's 1700mm long, 790mm wide and 580mm high, and holds 246 litres. The overflow is built in and the waste sits in the centre. It's made from sanitary grade acrylic that resists stains, with a classic heritage shape. Footlocker fittings come in the box for extra stability, though they're not fitted. The plug and waste is sold separately (323060C or 323060W), so add one to your order. Caroma backs it with a 20 year warranty.

• 1700mm long and 790mm wide for a full length soak
• 246 litre capacity with an overflow included to help stop spills
• Centre waste, so nobody has to lean back against the plug end
• Sanitary grade acrylic that resists stains
• Footlocker fittings supplied, not fitted, for a steadier install
• Plug and waste sold separately: 323060C or 323060W
• Finished in gloss white and covered by a 20 year warranty

Check your floor waste lines up with the centre waste position, and plan the carry in, as it weighs 59kg. Pair it with the Riviere Bath/Shower Mixer and Wall Basin/Bath Outlet 210mm if it sits near a wall.

Also available in Matte White.

Specifications

• Construction Material: Sanitary Grade Acrylic
• Weight: 59.0kg
• Overflow: Overflow included
• Plug & Waste: Sold separately
• Capacity (L): 246L
• Length: 1700mm
• Width: 790mm
• Height: 580mm
• Waste Location: Centre
• Warranty: 20 years

What's In The Box

1 x Freestanding Bath

Downloads

Download the installation instructions below:

Caroma Riviere 1700mm Freestanding Bath with Overflow Gloss White Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Wall tap over the bath or basin due for an upgrade? The Caroma Riviere Wall Basin/Bath Mixer 210mm in Brushed Brass is a wall set: a single lever mixer plus a separate 210mm spout, so you get one handle for temperature and flow and a long outlet that reaches well over a basin or into a bath. It's built on Caroma EasySwitch, a universal body that goes inside the wall, so your plumber can fit the body during the rough-in and you can pick the finish later. Inside is a 35mm ceramic disc cartridge, and the body is lead free brass. Flow is WELS 6 star at 4.5 litres a minute, with an unrestricted aerator in the box for faster bath fills. It's backed by a 20 year warranty.

• Mixer and 210mm spout in one pack, so the longer reach covers a bath or a deep basin
• Single lever control on a 35mm ceramic disc cartridge for smooth, steady adjustment
• Caroma EasySwitch in-wall body, which lets you install now and choose the look later
• Unrestricted aerator included for filling a bath quicker
• WELS 6 star at 4.5 litres a minute for everyday basin use
• Lead free brass construction for safer water and years of service
• Finished in brushed brass to match other Riviere pieces in the room

Wall mounted, for 150 to 500kPa water pressure. Check the spout height and 210mm reach against your basin or bath before you buy, and ask your plumber about the in-wall body. Add a Caroma Riviere rain shower, towel rail or towel ring to carry the same finish through the bathroom.

Also available in Chrome, Brushed Nickel and Brushed Bronze.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47336
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 35mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 120mm
• Spout reach: 210mm
• Overall depth: 222mm
• Warranty: 20 Years

What's In The Box

1 x Tap set, Spout, fixing kit, installation instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Redoing a bath or basin with old-style two tap control? The Caroma Riviere Wall Basin/Bath Set 210mm in Brushed Bronze gives you a pair of wall taps plus a 210mm spout, so everything for traditional two tap control arrives together. The taps run on quarter turn ceramic disc cartridges, meaning a short twist takes you from off to full flow. The longer 210mm reach makes it a strong pick over a bath, and an unrestricted aerator is in the box for faster filling there. As supplied it's WELS 6 star at 4.5 litres a minute. Optional 60mm trouble dome plates are included to help cover old holes when you're replacing a set. Lead free brass, with a 20 year warranty.

• Complete set: hot and cold wall taps plus a 210mm spout
• Quarter turn ceramic disc cartridges, so the taps go from off to full in a short twist
• 210mm reach, a good fit over a bath or a basin set further from the wall
• Optional 60mm trouble dome plates in the box to tidy up old holes on a retrofit
• WELS 6 star at 4.5 litres a minute, plus an unrestricted aerator for bath filling
• Lead free brass in a brushed bronze finish
• 20 year warranty from Caroma

Wall mounted, for 150 to 500kPa water pressure. Check the spacing of your existing tap holes with your plumber before you order. Finish the job with a Caroma Riviere Hand Shower and a Riviere Double Towel Rail 600mm in the same finish.

Also available in Chrome, Brushed Nickel and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47376
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 1/4 turn ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 85mm
• Spout reach: 210mm
• Warranty: 20 Years

What's In The Box

1 x Tap set, Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Wall Basin/Bath Set 210mm Brushed Bronze Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Tiny powder room or ensuite to fit out? The Caroma Riviere Hand Wall Basin in Matte White is a compact wall hung basin, so the floor underneath stays clear and easy to clean. It's 530mm long, only 180mm wide and 325mm high, which suits a narrow powder room, toilet or small ensuite. The bowl holds 5.2 litres, and there's one tap hole for a mixer mounted on the basin. It's a non overflow basin, and a flush fitting plug and waste comes in the box. It's made from ceramic with a smooth surface that resists stains, offered in gloss or matte white. Caroma covers it with a 20 year warranty.

• Wall hung design that keeps the floor clear for easier cleaning
• 530mm long, 180mm wide and 325mm high, sized for tight spots
• One tap hole for a mixer mounted on the basin
• Non overflow bowl with a flush fitting plug and waste included
• Ceramic in matte white with a smooth surface that resists stains
• 5.2 litre bowl and a 20 year warranty

It weighs 14.18kg, so make sure the wall can take it, and ask your plumber about the waste position before you buy. Pair it with the Riviere Mid Tower Basin Mixer and Hand Towel Rail.

Also available in White.

Specifications

• Construction material: Ceramic
• Finish: Matte
• Tap holes: 1 taphole, suits mixer tap mounted on basin
• Overflow: Non-overflow only
• Plug and waste: Plug & waste included
• Bowl Capacity (L): 5.2
• Length (mm): 530
• Width (mm): 180
• Height (mm): 325
• Product Weight: 14.18 kg
• Warranty: 20 Years

What's In The Box

1 x Wall Hung Basin, 1 x Plug and Waste

Downloads

Download the specification sheet below:

Caroma Riviere Hand Wall Basin Matte White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want the taps and spout in one box? The Caroma Riviere Wall Basin/Bath Set 210mm in Brushed Brass gives you a pair of wall taps plus a 210mm spout, so everything for traditional two tap control arrives together. The taps run on quarter turn ceramic disc cartridges, meaning a short twist takes you from off to full flow. The longer 210mm reach makes it a strong pick over a bath, and an unrestricted aerator is in the box for faster filling there. As supplied it's WELS 6 star at 4.5 litres a minute. Optional 60mm trouble dome plates are included to help cover old holes when you're replacing a set. Lead free brass, with a 20 year warranty.

• Complete set: hot and cold wall taps plus a 210mm spout
• Quarter turn ceramic disc cartridges, so the taps go from off to full in a short twist
• 210mm reach, a good fit over a bath or a basin set further from the wall
• Optional 60mm trouble dome plates in the box to tidy up old holes on a retrofit
• WELS 6 star at 4.5 litres a minute, plus an unrestricted aerator for bath filling
• Lead free brass in a brushed brass finish
• 20 year warranty from Caroma

Wall mounted, for 150 to 500kPa water pressure. Check the spacing of your existing tap holes with your plumber before you order. Finish the job with a Caroma Riviere Hand Shower and a Riviere Double Towel Rail 600mm in the same finish.

Also available in Chrome, Brushed Bronze and Brushed Nickel.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47376
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 1/4 turn ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 85mm
• Spout reach: 210mm
• Warranty: 20 Years

What's In The Box

1 x Tap set, Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Wall Basin/Bath Set 210mm Brushed Brass Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Setting up a classic three piece tap set on the wall? The Caroma Riviere Wall Basin/Bath Outlet 210mm in Chrome is the spout only. It's made to sit between a pair of Riviere Wall Top Assemblies, sold separately, for a traditional hot and cold setup. The 210mm reach puts the water well out from the wall, clearing a wide basin rim or the edge of a bath. It's lead free brass and rated WELS 6 star at 4.5 litres a minute, and an unrestricted aerator comes in the box for when you want the bath to fill faster. The fixing kit and instructions are included. Caroma leak tests its tapware, and this outlet is backed by a 20 year warranty.

• Spout only, with a 210mm reach from the wall for a basin or bath
• Made to pair with Riviere Wall Top Assemblies for separate hot and cold control
• WELS 6 star at 4.5 litres a minute to keep water use down at the basin
• Unrestricted aerator in the pack, so a bath fills quicker
• Lead free brass with a chrome finish to match the taps either side
• 20 year warranty, and every Caroma tap is leak tested

It needs a set of wall taps to run, so order the Wall Top Assemblies in the same finish. Rated for 150 to 500kPa; ask your plumber to confirm your pressure. Finish the room with the Riviere Hand Towel Rail and Bathroom Shelf.

Also available in Brushed Bronze, Brushed Nickel and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47338
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 85mm
• Spout reach: 210mm
• Warranty: 20 Years

What's In The Box

1 x Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Wall Basin/Bath Outlet 210mm Chrome Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a wall outlet that works over a basin or a bath? The Caroma Riviere Wall Basin/Bath Outlet 175mm in Brushed Nickel is the spout on its own. There are no taps in the box, so you'll pair it with separate hot and cold wall taps. It comes 175mm out from the wall, which suits most basins and plenty of baths, and stands 85mm high. The body is lead free brass. As supplied it's WELS 6 star at 4.5 litres a minute, and an unrestricted aerator is included for when it's going over a bath and you want a faster fill. Its classic heritage look sits well in older homes and new builds. Caroma covers it with a 20 year warranty.

• Spout only with a 175mm reach, to run with separate hot and cold wall taps
• Works over a basin or a bath, so one outlet covers either job
• WELS 6 star at 4.5 litres a minute as supplied for lower water use
• Unrestricted aerator in the box for a quicker fill when it's over a bath
• Lead free brass body, 85mm high, built for daily use
• Brushed nickel finish to match the rest of your Riviere tapware
• 20 year warranty from Caroma

Wall mounted, for 150 to 500kPa water pressure. Measure from the wall to the centre of your basin or bath before you settle on 175mm. Team it with Caroma Riviere towel rails and a Riviere Robe Hook in the same finish, or grab the Riviere Wall Basin/Bath Set 210mm if you need the taps too.

Also available in Chrome, Brushed Bronze and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47335
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 85mm
• Spout reach: 175mm
• Warranty: 20 Years

What's In The Box

1 x Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Wall Basin/Bath Outlet 175mm Brushed Nickel Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing a drop-in basin in your vanity top? The Caroma Riviere Inset Basin - No Tap Hole in Matte White drops into a cut-out in your vanity top, with the rim resting on the bench. With no tap hole, the mixer goes on the wall or on the bench beside it. It measures 530mm long, 370mm wide and 182mm high, with an 8.6 litre bowl. There's no overflow, and a flush fitting plug and waste is included. It's ceramic with a smooth surface that resists stains, and it has a classic heritage look that ties in with the rest of the Riviere range. Covered by a 20 year warranty.

• Inset design that drops into a cut-out in the vanity top
• No tap hole, made for a wall mixer or a mixer mounted on the bench
• 8.6 litre bowl in a 530mm by 370mm footprint
• Non overflow, with a flush fitting plug and waste supplied
• Ceramic in matte white that resists stains and wipes clean
• Backed by a 20 year warranty

Check the cut-out size against your benchtop before you order, and ask your plumber where the waste needs to sit. Pair it with the Riviere Wall Basin/Bath Mixer 175mm and Hand Towel Rail.

Also available in White.

Specifications

• Construction material: Ceramic
• Finish: Matte
• Tap holes: No taphole, suits wall mounted or bench mounted tapware
• Overflow: Non-overflow only
• Plug and waste: Plug & waste included
• Bowl Capacity (L): 8.6
• Length (mm): 530
• Width (mm): 370
• Height (mm): 182
• Product Weight: 9.06 kg
• Warranty: 20 Years

What's In The Box

1 x Inset Basin, 1 x Plug and Waste

Downloads

Download the specification sheet below:

Caroma Riviere Inset Basin - No Tap Hole Matte White Spec Sheet

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Kitchen tap past its best? The Caroma Riviere Sink Mixer in Chrome is a single lever mixer for your kitchen sink. It stands 378mm tall with 230mm to the spout and a 220mm reach, so there's room to fill a stockpot or rinse a baking tray. The spout swivels and can be set to turn through 70 or 140 degrees. A 35mm ceramic disc cartridge sits inside a lead free brass body. Out of the box it's WELS 5 star at 6.0 litres a minute, and a WELS 6 star aerator at 4.5 litres a minute is supplied if you'd like to save more water. Caroma backs it with a 20 year warranty.

• 378mm tall with 230mm to the spout, so big pots and jugs fit under easily
• 220mm reach that brings the water out towards the middle of the sink
• Swivel spout you can set to 70 or 140 degrees of rotation
• 35mm ceramic disc cartridge on a single lever for smooth control
• WELS 5 star at 6.0 litres a minute, with a WELS 6 star 4.5 litre aerator in the box
• Lead free brass body in a chrome finish
• 20 year warranty from Caroma

Needs 150 to 500kPa water pressure. Check there's clearance under any overhead cupboard for the 378mm height. If you'd rather a pull out spray, see the Caroma Riviere Pull Out Sink Mixer, or carry the look into the bathroom with the Riviere Basin Mixer.

Also available in Brushed Nickel, Brushed Bronze and Brushed Brass.

Specifications

• WELS water efficiency: 5 star WELS rated
• WELS water consumption: 6.0L/min
• WELS registration number: T47373 & T47372
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: PVD
• Operating mechanism: 35mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 378mm
• Height to spout: 230mm
• Spout reach: 220mm
• Spout function: Swivel, 70deg-140deg rotation
• Warranty: 20 Years

What's In The Box

1 x Sink Mixer, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Sink Mixer Chrome Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Only the spout needs replacing? The Caroma Riviere Wall Basin/Bath Outlet 210mm in Brushed Nickel is the spout only. It's made to sit between a pair of Riviere Wall Top Assemblies, sold separately, for a traditional hot and cold setup. The 210mm reach puts the water well out from the wall, clearing a wide basin rim or the edge of a bath. It's lead free brass and rated WELS 6 star at 4.5 litres a minute, and an unrestricted aerator comes in the box for when you want the bath to fill faster. The fixing kit and instructions are included. Caroma leak tests its tapware, and this outlet is backed by a 20 year warranty.

• Spout only, with a 210mm reach from the wall for a basin or bath
• Made to pair with Riviere Wall Top Assemblies for separate hot and cold control
• WELS 6 star at 4.5 litres a minute to keep water use down at the basin
• Unrestricted aerator in the pack, so a bath fills quicker
• Lead free brass with a brushed nickel finish to match the taps either side
• 20 year warranty, and every Caroma tap is leak tested

It needs a set of wall taps to run, so order the Wall Top Assemblies in the same finish. Rated for 150 to 500kPa; ask your plumber to confirm your pressure. Finish the room with the Riviere Hand Towel Rail and Bathroom Shelf.

Also available in Chrome, Brushed Bronze and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47338
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 85mm
• Spout reach: 210mm
• Warranty: 20 Years

What's In The Box

1 x Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Wall Basin/Bath Outlet 210mm Brushed Nickel Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Basin mixer dripping or just looking tired? The Caroma Riviere Basin Mixer in Chrome is a standard height, single lever mixer for your bathroom basin. It stands 170mm tall with a fixed spout that reaches 125mm, which suits most vanity and benchtop basins. The body is lead free brass, and a 25mm ceramic disc cartridge sits behind the lever, so flow and temperature are one easy movement. It carries a WELS 6 star rating at 4.5 litres a minute, which keeps your water use low. SoftPEX hoses come in the box, ready for your plumber to connect. The look is classic and heritage without going over the top. Caroma backs it with a 20 year warranty.

• Single lever on a 25mm ceramic disc cartridge, so you set flow and temperature in one move
• 170mm overall height with a fixed 125mm spout, which suits most standard basins
• Lead free brass body for safer drinking water and a long working life
• WELS 6 star at 4.5 litres a minute to keep your water use in check
• SoftPEX hoses supplied, made to last and ready for your plumber
• Chrome finish that matches the other Riviere tapware and accessories
• 20 year warranty from Caroma

Check your water pressure sits between 150 and 500kPa, and ask your plumber if you're not sure. Pair it with the Caroma Riviere Inset Basin 1 Tap Hole, plus a Riviere towel rail and robe hook in the same finish.

Also available in Brushed Bronze, Brushed Nickel and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47329
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 25mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 170mm
• Height to spout: 68mm
• Spout reach: 125mm
• Warranty: 20 Years

What's In The Box

1 x Basin Mixer, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Basin Mixer Chrome Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need more room under the tap to wash your face? The Caroma Riviere Gooseneck Basin Mixer in Brushed Brass has a tall, curved spout that stands 263mm overall, with 170mm to the spout and a 140mm reach. That extra height makes washing your face or filling a glass much easier. The spout swivels, and you can set it to turn a full 360 degrees, limit it to 140 degrees, or lock it in place. Inside the lead free brass body is a 35mm ceramic disc cartridge, run from a single lever. It's WELS 6 star rated at 4.5 litres a minute, so it's easy on water. SoftPEX hoses are supplied. Caroma covers it with a 20 year warranty.

• Gooseneck spout, 263mm tall with 170mm to the outlet, for plenty of room under the water
• Swivel you can set to 360 degrees, 140 degrees or fixed, so it suits how you use the basin
• 35mm ceramic disc cartridge behind a single lever for easy control
• 140mm reach that brings the water well over the bowl
• WELS 6 star at 4.5 litres a minute, which goes easy on your water bill
• Lead free brass in a brushed brass finish, with SoftPEX hoses in the box
• 20 year warranty from Caroma

Works on 150 to 500kPa water pressure. Check the spout height clears any shelf or mirror above the basin. Pair it with the Caroma Riviere Under Counter Basin with Overflow and a Riviere Robe Hook in the same finish.

Also available in Chrome, Brushed Bronze and Brushed Nickel.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47333
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 35mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 263mm
• Height to spout: 170mm
• Spout reach: 140mm
• Warranty: 20 Years

What's In The Box

1 x Basin Mixer, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Gooseneck Basin Mixer Brushed Brass Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a bit more room under the spout? The Caroma Riviere Mid Tower Basin Mixer in Brushed Bronze gives you extra height without going to a full tower. It stands 235mm overall with 133mm under the spout and a 145mm reach, so there's room to wash your hands or rinse a razor without knocking the bowl. It has a classic heritage look and simple single lever control. The body is lead free brass, and a 25mm ceramic disc cartridge does the mixing. It's WELS 6 star rated at 4.5 litres a minute, so water use stays low. It connects with SoftPEX hoses, and the fixing kit comes in the box. Caroma covers it with a 20 year warranty.

• 235mm tall with 133mm under the spout, so there's more clearance than a standard basin mixer
• 145mm spout reach that brings the water out over the bowl
• Lead free brass body for safer drinking water
• 25mm ceramic disc cartridge for smooth single lever control
• WELS 6 star at 4.5 litres a minute, which keeps water and hot water bills down
• Finished in brushed bronze to match the rest of the Riviere tapware and accessories
• Caroma leak tests every tap, and this one carries a 20 year warranty

Check your basin or bench has a tap hole for it, and that your pressure sits between 150 and 500kPa. Ask your plumber if you're not sure. Pair it with the Riviere Hand Towel Rail, Toilet Roll Holder and Bathroom Shelf in the same finish.

Also available in Chrome, Brushed Nickel and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47330
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 25mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 235mm
• Height to spout: 133mm
• Spout reach: 145mm
• Warranty: 20 Years

What's In The Box

1 x Basin Mixer, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Mid Tower Basin Mixer Brushed Bronze Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want your flush button to match the rest of the bathroom? The Caroma Riviere Invisi II Series Button in Brushed Nickel is the flush plate only: the button you press on the wall for a Caroma Invisi Series II in-wall cistern. The cistern must already be installed, or bought separately, as it isn't in this box. The plate is brass, measures 210mm wide by 110mm high, and fixes with no visible screws. It also lifts off to give full service access to the cistern behind, so your plumber can get in without opening the wall. It's a quick way to bring the classic Riviere look to the toilet. Covered by a 20 year warranty.

• Flush plate for a Caroma Invisi Series II in-wall cistern, sold on its own
• Brass construction for a solid feel under your hand
• Concealed fixing, so there are no screws on show
• Full service access to the cistern through the plate opening
• 210mm wide by 110mm high to cover the cistern access hole
• Finished in brushed nickel to match your Riviere tapware
• 20 year warranty

Only fits a Caroma Invisi Series II in-wall cistern. Check which cistern you have before ordering, and ask your plumber if you're not sure. Match it with Caroma Riviere basin mixers, towel rails and the towel ring in the same finish.

Also available in Chrome, Brushed Brass and Brushed Bronze.

Specifications

• Construction material: Brass
• Finish/coating: Chromeplated
• Overall height (mm): 110
• Projection from wall (mm): 80
• Overall width (mm): 210
• Warranty: 20 Years

What's In The Box

1 x Flush Button, fixing kit, installation instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Prefer two handles over a single lever? The Caroma Riviere Wall Basin/Bath Set 175mm in Brushed Brass gives you separate hot and cold handles with a 175mm spout between them, mounted on the wall above a basin or bath. That's the full kit in one box: two taps and the outlet. Each handle runs a 1/4 turn ceramic disc cartridge, so it goes from off to full flow in a quick twist. The set is lead free brass with a classic heritage look. Flow is WELS 6 star at 4.5 litres a minute, and an unrestricted aerator is included for faster bath fills. Optional 60mm trouble dome plates help cover old holes on a retrofit. Covered by a 20 year warranty.

• Two handle set with a 175mm spout, for separate hot and cold control
• 1/4 turn ceramic disc cartridges, so it's quick to turn on and off
• Optional 60mm trouble dome plates included, which makes a retrofit over old tap holes tidier
• Unrestricted aerator in the box for filling a bath faster
• WELS 6 star at 4.5 litres a minute to keep water use down
• Lead free brass body built for daily use
• The brushed brass finish ties in with the rest of the Riviere range

Wall mounted, for 150 to 500kPa. If you're swapping out old wall taps, check the hole spacing and the 175mm reach with your plumber first. Pair it with the Caroma Riviere Basin Set, a towel rail or the rain shower in the same finish.

Also available in Chrome, Brushed Bronze and Brushed Nickel.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47375
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 1/4 turn ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 85mm
• Spout reach: 175mm
• Warranty: 20 Years

What's In The Box

1 x Tap set, Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Wall Basin/Bath Set 175mm Brushed Brass Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing a bath that sits against the wall? The Caroma Riviere 1700mm Back to Wall Bath with Overflow in Matte White sits flat against the wall with a finished front on show, so there's no hob or tiled surround to build. It's 1700mm long, 800mm wide and 580mm high, and holds 253 litres. The bath is sanitary grade acrylic, which is stain resistant and warm to the touch. An overflow is built in, the waste sits in the centre, and footlocker fittings come in the box for extra stability (not fitted). The plug and waste is sold separately. It weighs 59kg. Backed by a 20 year warranty.

• Back to wall design with a finished front, so there's no hob to build
• 1700mm long, 800mm wide and 580mm high, holding 253 litres
• Overflow included to help stop the bath spilling over
• Centre waste location
• Stain resistant sanitary grade acrylic in matte white
• Footlocker fittings supplied for extra stability, ready for your installer to fit
• 20 year warranty

Plug and waste is not included: add 323060C or 323060W. Measure your wall and check the waste position lines up before you buy. Pair it with the Caroma Riviere Wall Set 175mm or Wall Mixer 210mm for filling.

Also available in Gloss White.

Specifications

• Construction Material: Sanitary Grade Acrylic
• Weight: 59.0kg
• Overflow: Overflow included
• Plug & Waste: Sold separately
• Capacity (L): 253L
• Length: 1700mm
• Width: 800mm
• Height: 580mm
• Waste Location: Centre
• Warranty: 20 years

What's In The Box

1 x Back To Wall Bath

Downloads

Download the installation instructions below:

Caroma Riviere 1700mm Back to Wall Bath with Overflow Matte White Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Already got wall taps and just need the spout? The Caroma Riviere Wall Basin/Bath Outlet 175mm in Chrome is the spout on its own. There are no taps in the box, so you'll pair it with separate hot and cold wall taps. It comes 175mm out from the wall, which suits most basins and plenty of baths, and stands 85mm high. The body is lead free brass. As supplied it's WELS 6 star at 4.5 litres a minute, and an unrestricted aerator is included for when it's going over a bath and you want a faster fill. Its classic heritage look sits well in older homes and new builds. Caroma covers it with a 20 year warranty.

• Spout only with a 175mm reach, to run with separate hot and cold wall taps
• Works over a basin or a bath, so one outlet covers either job
• WELS 6 star at 4.5 litres a minute as supplied for lower water use
• Unrestricted aerator in the box for a quicker fill when it's over a bath
• Lead free brass body, 85mm high, built for daily use
• Chrome finish to match the rest of your Riviere tapware
• 20 year warranty from Caroma

Wall mounted, for 150 to 500kPa water pressure. Measure from the wall to the centre of your basin or bath before you settle on 175mm. Team it with Caroma Riviere towel rails and a Riviere Robe Hook in the same finish, or grab the Riviere Wall Basin/Bath Set 210mm if you need the taps too.

Also available in Brushed Bronze, Brushed Nickel and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47335
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 85mm
• Spout reach: 175mm
• Warranty: 20 Years

What's In The Box

1 x Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Wall Basin/Bath Outlet 175mm Chrome Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a basin tap with a bit of old-school charm? The Caroma Riviere Basin Mixer in Brushed Nickel is a standard height, single lever mixer for your bathroom basin. It stands 170mm tall with a fixed spout that reaches 125mm, which suits most vanity and benchtop basins. The body is lead free brass, and a 25mm ceramic disc cartridge sits behind the lever, so flow and temperature are one easy movement. It carries a WELS 6 star rating at 4.5 litres a minute, which keeps your water use low. SoftPEX hoses come in the box, ready for your plumber to connect. The look is classic and heritage without going over the top. Caroma backs it with a 20 year warranty.

• Single lever on a 25mm ceramic disc cartridge, so you set flow and temperature in one move
• 170mm overall height with a fixed 125mm spout, which suits most standard basins
• Lead free brass body for safer drinking water and a long working life
• WELS 6 star at 4.5 litres a minute to keep your water use in check
• SoftPEX hoses supplied, made to last and ready for your plumber
• Brushed nickel finish that matches the other Riviere tapware and accessories
• 20 year warranty from Caroma

Check your water pressure sits between 150 and 500kPa, and ask your plumber if you're not sure. Pair it with the Caroma Riviere Inset Basin 1 Tap Hole, plus a Riviere towel rail and robe hook in the same finish.

Also available in Chrome, Brushed Bronze and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47329
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Operating mechanism: 25mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 170mm
• Height to spout: 68mm
• Spout reach: 125mm
• Warranty: 20 Years

What's In The Box

1 x Basin Mixer, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Basin Mixer Brushed Nickel Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Freestanding bath with nowhere to mount a tap? The Caroma Riviere Freestanding Bath Filler with Handshower in Brushed Bronze stands on the floor beside a freestanding bath, with the mixer, outlet and a single function handshower all in one unit. It's 1070mm tall with 925mm under the spout and a 270mm reach to clear the bath rim. The outlet can be fixed, or set to swivel 140 or 360 degrees. A 35mm ceramic disc cartridge runs the lever, dual check valves are built in, and the body is brass. It's WELS 3 star at 9.0 litres a minute for a quicker fill. Backed by a 20 year warranty.

• Floor mounted filler for freestanding baths, with mixer and outlet in one
• 1070mm high with a 270mm reach, so the spout clears the bath rim
• Outlet can be fixed or swivel 140 or 360 degrees, which suits your layout
• Single function handshower for rinsing the bath or yourself
• 35mm ceramic disc cartridge and dual check valves
• WELS 3 star at 9.0 litres a minute
• Brass body in a brushed bronze finish, covered by a 20 year warranty

Needs floor connections in place before the bath goes in, and 150 to 500kPa water pressure, so plan it with your plumber at rough-in. Pair it with a Caroma Riviere towel rail and basin mixer in the same finish.

Also available in Brushed Nickel, Brushed Brass and Chrome.

Specifications

• WELS water efficiency: 3 star WELS rated
• WELS water consumption: 9.0L/min
• WELS registration number: S47445
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Brass
• Finish/coating: PVD
• Operating mechanism: 35mm ceramic disc cartridge
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 1070mm
• Height to spout: 925mm
• Spout reach: 270mm
• Spout function: Fixed or Swivel, 140deg/360deg rotation
• Warranty: 20 Years

What's In The Box

1 x bath filler with mixer and outlet, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Freestanding Bath Filler with Handshower Brushed Bronze Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Bath spout in the way when you climb in? The Caroma Riviere Swivel Bath Outlet 220mm in Brushed Bronze is a bath spout that still moves through its arc once it's installed, so you can push it clear or aim the water where you want it. It reaches 220mm out from the wall and stands 113mm high. This is the spout only, with no taps in the box, so you'll need taps to run it. It's made from brass, Watermark certified and 100% leak tested by Caroma, and it works on 150 to 500kPa water pressure. The classic heritage shape suits an older home or a new bathroom. Caroma covers it with a 20 year warranty.

• Swivel spout that moves after installation, so you can swing it clear of the bath
• 220mm reach for good coverage over the bath
• Spout only, so you choose the taps that drive it
• Brass body, Watermark certified and 100% leak tested
• Brushed bronze finish that suits the rest of the Riviere range
• Suits 150 to 500kPa water pressure
• 20 year warranty from Caroma

Wall mounted. Measure from the wall to where you want the water to land before you order. Pair it with a Caroma Riviere Hand Shower and a Riviere Double Towel Rail 600mm in the same finish.

Also available in Brushed Nickel, Brushed Brass and Chrome.

Specifications

• WELS water efficiency: N/A
• WELS water consumption: N/A
• WELS registration number: N/A
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Brass
• Finish/coating: PVD
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 113mm
• Spout reach: 220mm
• Spout function: Swivel
• Warranty: 20 Years

What's In The Box

1 x Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Swivel Bath Outlet 220mm Brushed Bronze Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a longer wall spout for your bath or basin? The Caroma Riviere Wall Basin/Bath Outlet 210mm in Brushed Bronze is the spout only. It's made to sit between a pair of Riviere Wall Top Assemblies, sold separately, for a traditional hot and cold setup. The 210mm reach puts the water well out from the wall, clearing a wide basin rim or the edge of a bath. It's lead free brass and rated WELS 6 star at 4.5 litres a minute, and an unrestricted aerator comes in the box for when you want the bath to fill faster. The fixing kit and instructions are included. Caroma leak tests its tapware, and this outlet is backed by a 20 year warranty.

• Spout only, with a 210mm reach from the wall for a basin or bath
• Made to pair with Riviere Wall Top Assemblies for separate hot and cold control
• WELS 6 star at 4.5 litres a minute to keep water use down at the basin
• Unrestricted aerator in the pack, so a bath fills quicker
• Lead free brass with a brushed bronze finish to match the taps either side
• 20 year warranty, and every Caroma tap is leak tested

It needs a set of wall taps to run, so order the Wall Top Assemblies in the same finish. Rated for 150 to 500kPa; ask your plumber to confirm your pressure. Finish the room with the Riviere Hand Towel Rail and Bathroom Shelf.

Also available in Chrome, Brushed Nickel and Brushed Brass.

Specifications

• WELS water efficiency: 6 star WELS rated
• WELS water consumption: 4.5L/min
• WELS registration number: T47338
• Watermark certification: All Caroma Taps are Watermark Certified
• Construction material: Lead Free Brass
• Finish/coating: Chromeplated
• Temperature rating: 1 - 75°C
• Operating pressure: 150 - 500kPa
• Overall height: 85mm
• Spout reach: 210mm
• Warranty: 20 Years

What's In The Box

1 x Spout, fixing kit, installation instructions

Downloads

Download the installation instructions below:

Caroma Riviere Wall Basin/Bath Outlet 210mm Brushed Bronze Installation Instructions

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages