All Products

Standard mixer too low for your above-counter bowl? The Raymor Edge II Basin Tower Mixer in Black is the extended height version of the Edge II basin mixer, built for above-counter basins where the spout has to clear the rim of the bowl. Same squared styling, same paddle handle, just taller. It mounts through a single tap hole in the vanity top. The body is lead free brass under a black electroplated finish, and the handle runs a 35mm ceramic disc cartridge for years of smooth, drip-free use. Braided hoses lined with PERT are attached and ready for your plumber. It's WELS 5 star rated at 6.0 litres a minute. Also available in Chrome and Brushed Nickel.

• Taller tower body that clears the rim of a vessel basin sitting on the vanity
• Squared Edge II design with a paddle handle to match the rest of the range
• Lead free brass under a black electroplated finish, so it stays looking sharp
• 35mm ceramic disc cartridge that keeps the handle light and the spout drip-free
• PERT lined braided hoses fitted, saving time on the install
• WELS 5 star at 6.0 litres a minute for lower water use at the basin

Suits hob mounted vessel basins with one tap hole and 150 to 500kPa pressure. Check the height against your bowl before you buy, and ask your plumber if it's marginal.

Team it with Edge II bath or basin spouts, wall mixers, showers and accessories in Black.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43433
Construction material: Lead-Free Brass
Operating mechanism: Ceramic Disc
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Height to spout: 250mm
Spout reach: 170mm
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Basin Mixer
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Rinsing the far side of the sink with a jug? The Raymor Winton Sink Mixer with Pullout and Veggie Spray in Brushed Nickel gives you a spout that swivels plus a handpiece you can pull down to the corners of the sink or across to a pot on the bench. Flick it to veggie spray and rinsing salad or scrubbing spuds gets a lot easier. It's a single hole, hob mounted mixer, so it drops into most kitchen and laundry sinks as a direct replacement. Under the brushed nickel electroplated finish is a lead free brass body, with a 35mm ceramic disc cartridge in a brass housing and a dual check valve built in for backflow protection. WELS 5 star rated at 6.0 litres a minute. Backed by a 20 year warranty on the body and cartridge, with 10 years on the handpiece and pull-out hose. Also available in Black.

• Pull-down handpiece that reaches every corner of the sink and fills pots on the bench
• Veggie spray setting for rinsing produce or shifting stuck-on food off plates
• Gooseneck swivel spout at 393mm high with a 228mm reach, so tall stockpots fit underneath
• Lead free brass body with a brushed nickel electroplated finish that copes with kitchen grease and cleaning
• 35mm ceramic disc cartridge in a brass housing for a smooth paddle handle over years of use
• Quick fit hose connection under the bench, which shortens the job for your plumber
• WELS 5 star at 6.0 litres a minute, so the water bill stays sensible

Hob mounted through one tap hole, for water pressure between 150 and 500kPa. Leave room under the bench for the hose weight to travel, and ask your plumber if you're unsure.

Pair it with Winton basin mixers, tower mixers and wall mixer sets in Brushed Nickel across the rest of the house.

Specifications

WELS water consumption: 6.0 L/Min
WELS registration number: T43457
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Height to spout: 393mm
Spout reach: 228mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Sink Mixer
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Sink mixer past its best and dripping on the bench? The Raymor Sigma Sink Mixer with Detachable Hose in Brushed Nickel has a tall, soft square spout at 453mm high with a 220mm reach, and the handpiece lifts off on its hose so you can rinse right into the corners of the sink or fill a bucket on the floor. It swivels too. It's hob mounted for a single tap hole, so it goes in where your current mixer sits. Lead free brass body, brushed nickel electroplated finish, and a 35mm ceramic disc cartridge in a brass housing behind the paddle handle. Braided hoses with a PERT lining are fitted. WELS 5 star at 6.0 litres a minute. Backed by a 20 year warranty on the body and cartridge, 10 years on the handpiece and hose. Also available in Chrome and Black.

• Detachable handpiece on a hose for reaching the corners of the sink or filling a mop bucket
• Tall swivel spout at 453mm with a 220mm reach, so stockpots and vases fit with ease
• Soft square Sigma styling that pairs with Sigma tapware, showers, basins and baths
• Lead free brass body with a brushed nickel electroplated finish built for the kitchen
• 35mm ceramic disc cartridge in a brass housing, which keeps the paddle handle smooth for years
• WELS 5 star at 6.0 litres a minute for lower water use without a feeble flow
• 20 year warranty on the body, cartridge, aerator, hoses, spout and handle, 10 years on the handpiece and hose, 5 years on Black and Brushed Nickel finishes and 20 years on the Chrome finish, 1 year on seals and labour

Hob mounted through one tap hole, for 150 to 500kPa water pressure. Check the height clears any overhead cupboard or window sill, and ask your plumber if you're unsure.

The Sigma range also covers tapware, showers, basins and baths in Brushed Nickel.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43338
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Height to spout: 453mm
Spout reach: 220mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 Years Mixer Cartridge, Body, Aerator,. Hoses, Spout, Handle and Chrome Finish. 10 Years Handpieces and pull down hoses. 5 Years PVD and Electroplate finishes. 1 Years Seals and Labour

What's In The Box

• 1 x Sink Mixer
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Replacing a wall spout with something sharper? The Raymor Edge II Bath or Basin Spout in Brushed Nickel is a wall mounted spout with the squared profile of the Edge II range, and it suits either a basin or a bath. It's made from lead free brass with a brushed nickel electroplated finish, so it puts up with splashes and cleaning without losing its look. Fitted with a WELS 5 star aerator at 6.0 litres a minute for everyday use, and an open flow aerator comes in the box for filling the bath faster. Team it with an Edge II wall mixer and you have a matching set on the wall. Also available in Chrome and Black.

• Wall mounted spout that works over a basin or a bath, which keeps the look consistent through the bathroom
• Lead free brass body built for years of daily use
• Squared brushed nickel electroplated finish that matches Edge II wall mixers and basin mixers
• WELS 5 star at 6.0 litres a minute to keep water use down at the basin
• Open flow aerator supplied, so you can fill the bath without the wait

Mounts to the wall over a basin or bath and runs on 150 to 500kPa water pressure. Check the reach suits your basin, and ask your plumber if you're unsure.

Edge II also does wall mixers, wall mixer sets, basin mixers, showers and accessories in Brushed Nickel.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43435
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Spout
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Wall spout dripping or showing its age? The Raymor Winton Bath or Basin Spout in Black is a wall mounted spout with the same soft curves as the rest of the Winton range, and it works over either a basin or a bath. The body is lead free brass under a black electroplated finish, which is what you want in a fitting that gets wet and wiped down every day. It ships with a WELS 5 star aerator rated at 6.0 litres a minute for everyday use, and there's an open flow aerator in the box for when you'd rather fill the bath in a hurry. Also available in Brushed Nickel and Chrome.

• Wall mounted spout that suits a basin or a bath, so you can use the same fitting in both spots
• Lead free brass body for safer water and a long working life
• Durable black electroplated finish that holds up to splashes and regular cleaning
• WELS 5 star at 6.0 litres a minute, keeping water use down at the basin
• Optional open flow aerator supplied, which speeds up filling the bath
• Curved Winton styling that matches Winton wall mixer sets and basin mixers

Fixes to the wall over the basin or bath and runs on 150 to 500kPa water pressure. Check the reach against your basin before you buy, and ask your plumber if you're unsure.

Complete the look with Winton basin mixers, tower mixers and wall mixer sets in Black.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43431
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Spout
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Refreshing the ensuite over a weekend? The Raymor Edge II Basin Mixer in Brushed Nickel is a squared-off single lever mixer for a basin set into the vanity, and a straight swap for most single hole basins. Clean lines and a flat paddle handle give it a modern look without any fuss. It's built from lead free brass with a brushed nickel electroplated finish, and a 35mm ceramic disc cartridge keeps the handle smooth and the spout drip-free. Nylon braided hoses with a PERT lining are already fitted, which saves your plumber time. WELS 5 star rated at 6.0 litres a minute, so it's easy on the water bill. Also available in Chrome and Black.

• Square profile with a flat paddle handle for a clean, current look on the vanity
• Lead free brass body that's safer for drinking water and lasts
• Tough brushed nickel electroplated finish that shrugs off toothpaste and cleaning
• 35mm ceramic disc cartridge for light, precise control and no dripping
• Braided flexible hoses lined with PERT, fitted at the factory
• WELS 5 star at 6.0 litres a minute, which keeps water use low every time you wash your hands

Hob mounted through a single tap hole, for 150 to 500kPa water pressure. For an above-counter basin, look at the taller Edge II Basin Tower Mixer instead.

Match it with Edge II spouts, sink mixers, wall mixer sets, showers and accessories in Brushed Nickel.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43432
Construction material: Lead-Free Brass
Operating mechanism: Ceramic Disc
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Height to spout: 250mm
Spout reach: 170mm
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Basin Mixer
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Replacing a tired kitchen mixer this weekend? The Raymor Projix Pull-Out Sink Mixer in Brushed Nickel has a swivel spout and a handpiece that pulls out on a hose, so rinsing the sink or filling a pot on the bench is no drama. At 377mm high with a 190mm reach it sits well over most single and double bowl sinks. It's a hob mounted mixer for a single tap hole, a direct swap for most kitchens. The body is lead free brass with a brushed nickel electroplated finish, and the pin lever handle runs a 35mm ceramic disc cartridge in a brass housing. Braided hoses with a PERT lining come fitted. WELS 5 star at 6.0 litres a minute. Backed by a 20 year warranty on the body and cartridge, and 10 years on the handpiece and hose. Also available in Chrome and Black.

• Pull-out handpiece on a hose, so you can rinse the whole sink and fill pots off to the side
• Swivel spout, 377mm high with a 190mm reach, which gives plenty of room under the outlet
• Pin lever handle on a 35mm ceramic disc cartridge in a brass housing for smooth, precise control
• Lead free brass body with a brushed nickel electroplated finish that stands up to daily kitchen use
• Nylon braided flexible hoses lined with PERT, fitted ready for your plumber
• WELS 5 star at 6.0 litres a minute to keep the water bill in check
• 20 year warranty on the body, cartridge, aerator, hoses, spout and handle, 10 years on the handpiece and pull-down hose, 5 years on Black and Brushed Nickel finishes and 20 years on the Chrome finish, 1 year on seals and labour

Hob mounted through one tap hole, for 150 to 500kPa water pressure. Check there's space under the bench for the hose to drop, and ask your plumber if you're unsure.

Projix also does straight spouts, bath spouts and wall mixers in Brushed Nickel to match.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43337
Construction material: Lead-Free Brass
Operating mechanism: Ceramic disc with brass housing
Cartridge size: 35mm
Operating pressure: 150 to 500kPa
Height to spout: 377mm
Spout reach: 190mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 Years Mixer Cartridge, Body, Aerator,. Hoses, Spout, Handle and Chrome Finish. 10 Years Handpieces and pull down hoses. 5 Years PVD and Electroplate finishes. 1 Years Seals and Labour

What's In The Box

• 1 x Sink Mixer
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Swapping a wall spout without redoing the tiles? The Raymor Winton Bath or Basin Spout in Chrome is a wall mounted spout with the same soft curves as the rest of the Winton range, and it works over either a basin or a bath. The body is lead free brass under a chrome electroplated finish, which is what you want in a fitting that gets wet and wiped down every day. It ships with a WELS 5 star aerator rated at 6.0 litres a minute for everyday use, and there's an open flow aerator in the box for when you'd rather fill the bath in a hurry. Also available in Black and Brushed Nickel.

• Wall mounted spout that suits a basin or a bath, so you can use the same fitting in both spots
• Lead free brass body for safer water and a long working life
• Durable chrome electroplated finish that holds up to splashes and regular cleaning
• WELS 5 star at 6.0 litres a minute, keeping water use down at the basin
• Optional open flow aerator supplied, which speeds up filling the bath
• Curved Winton styling that matches Winton wall mixer sets and basin mixers

Fixes to the wall over the basin or bath and runs on 150 to 500kPa water pressure. Check the reach against your basin before you buy, and ask your plumber if you're unsure.

Complete the look with Winton basin mixers, tower mixers and wall mixer sets in Chrome.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43431
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Spout
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Got an above-counter basin that needs a taller tap? The Raymor Winton Basin Tower Mixer in Chrome is the tall version of the Winton basin mixer, made for vessel basins that sit on top of the vanity rather than in it. At 246mm high with a 150mm reach, the spout clears the rim of most bowls and lands the water where you want it. It's hob mounted through a single tap hole. The body is lead free brass with a chrome electroplated finish, a 25mm ceramic disc cartridge runs the paddle handle, and nylon braided hoses with a PERT lining come attached for your plumber. WELS 5 star rated at 6.0 litres a minute. Also available in Black and Brushed Nickel.

• Tall tower body made for above-counter basins, so the spout clears the bowl
• 246mm spout height and 150mm reach, which puts the flow into the centre of most vessel basins
• Lead free brass construction under a chrome electroplated finish that keeps its looks
• 25mm ceramic disc cartridge for a light paddle handle and no drips
• Nylon braided hoses lined with PERT, fitted and ready to connect
• WELS 5 star at 6.0 litres a minute, so you save water at the basin every day

Suits hob mounted vessel basins with one tap hole and 150 to 500kPa water pressure. Measure your basin height first, and ask your plumber if the spout clearance is tight.

The Winton range also covers standard basin mixers, bath or basin spouts and wall mixer sets in Chrome.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T43429
Construction material: Lead-Free Brass
Operating mechanism: Ceramic Disc
Cartridge size: 25mm
Operating pressure: 150 to 500kPa
Height to spout: 246mm
Spout reach: 150mm
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour

What's In The Box

• 1 x Basin Mixer
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Laundry taps seized up or dripping? The Raymor Atlanta Washing Machine Stops in Chrome are a straight swap for the wall-mounted hot and cold stops behind most washing machines. The classic Atlanta styling with star handles suits older homes and new laundries alike. They're made from lead free brass with a chrome electroplated finish and use jumper valves, so a worn washer is a quick, low-cost fix down the track. Backed by a 15 year warranty on the body, handles and fittings. Not sure they'll suit your setup? Ask your plumber.

• Sold as a pair of hot and cold wall stops, ready to replace the existing set
• Lead free brass body for safer water and a longer working life
• Jumper valve design, so a dripping tap is fixed with a new washer rather than a new tap
• Star handles in the classic Atlanta style that are easy to grip with wet hands
• Chrome electroplated finish that wipes clean and resists tarnish
• 15 year warranty on the body, spindles, flanges, handles and fittings

Wall mounted, for 150 to 500kPa water pressure. Check your washing machine hoses have the standard fittings before you order.

Atlanta also does basin sets, spouts and wall top assemblies in Chrome if you're matching the rest of the house.

Specifications

Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Lead free: Yes
Country of origin: China
Warranty: 15 years - ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings, and chrome finish. 5 years - PVD and electroplate finishes. 1 year - seals, jumper valves and labour

What's In The Box

• 1 x set stop taps
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Prefer separate hot and cold taps to a single lever? The Raymor Projix Basin Set in Chrome is a three piece set with pin lever handles and a square gooseneck spout, made for hob-mounted basins with three tap holes. It's a sensible pick when you're replacing a worn set and want the same layout with a modern look. The set is lead free brass with a chrome electroplated finish, and ceramic disc valves give you smooth quarter-turn control without the drips. The spout stands 167mm high with a 145mm reach, so there's plenty of room to wash your hands. WELS 5 star rated at 6.0 litres a minute. Backed by a 15 year warranty on the body, spout, handles and fittings. Also available in Black and Brushed Nickel.

• Three piece set with pin lever handles and a square gooseneck spout for a clean, modern look
• Ceramic disc valves for smooth quarter-turn operation and a long drip-free life
• Lead free brass construction under a chrome electroplated finish
• 167mm spout height and 145mm reach that suit most hob-mounted basins
• WELS 5 star at 6.0 litres a minute to keep water use down
• 15 year warranty on the ceramic disc valves, body, spout, flanges, handles, aerators and fittings

Needs a basin with three tap holes and 150 to 500kPa water pressure. Replacing an old set? Your plumber can check the hole spacing matches.

Projix also does matching wall top assemblies, spouts and showers in Chrome.

Specifications

WELS water efficiency: 5 star
WELS water consumption: 6.0 L/Min
WELS registration number: T45278
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Height to spout: 167mm
Spout reach: 145mm
Lead free: Yes
Country of origin: China
Warranty: 15 years - ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings. 5 years - PVD and electroplate finishes. 1 year - Seals and labour.

What's In The Box

• 1 x Tap set
• Spout
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Need a wall spout that works over a basin or a bath? The Raymor Projix Straight Spout in Chrome does both, with a 180mm reach that clears most basins and fills a bath without splashing the wall. It's a straight, fixed spout in lead free brass with a chrome electroplated finish, so it stands up to daily use. Out of the box it's WELS 6 star at 4.5 litres a minute, and the 5 star 6.0 litre aerator comes in the pack if you'd rather more flow. There's an open flow aerator included too, for filling a bath quickly. Backed by a 20 year warranty on the spout body and chrome finish. Also available in Black and Brushed Nickel, and in a 220mm reach.

• Lead free brass body under a chrome electroplated finish, built for years of use
• 180mm reach that suits most basins and baths, so one spout covers both jobs
• WELS 6 star 4.5 litre a minute aerator factory fitted to keep water use down
• WELS 5 star 6.0 litre a minute aerator included as a separate option for a fuller flow
• Open flow aerator in the box for filling a bath faster
• Straight fixed design that pairs with Projix wall mixers and wall top assemblies
• 20 year warranty on the body, spout and chrome finish

Wall mounted with a fixed outlet. Works between 150 and 500kPa; ask your plumber if you're unsure of your pressure.

Team it with Projix wall mixers, tower basin mixers and showers in the same finish.

Specifications

WELS water efficiency: 6 star
WELS water consumption: 4.5 L/Min
WELS registration number: T46173
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Spout reach: 180mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Spout
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Need more storage above a wide vanity? The Fienza Pencil Edge 900 Mirror Cabinet gives a wide single or double vanity a proper place to put the clutter away. It measures 900 x 720 x 150mm, with three board shelves behind 5mm mirror doors finished with a polished pencil edge. The doors close softly and open from a finger notch, so there are no handles to knock with an elbow. The back of the mirror is copper-free and sealed with resin emulsion paint, which helps it hold up against corrosion in a steamy room. The carcass is E1 MDF in 2-pack gloss white, and the 16mm backing board means fixing screws can go in wherever your studs happen to be. Hang it flat on the wall, or semi-recess it for a slimmer profile.

• 900mm wide, so it suits a wide single or double vanity below
• Three internal board shelves for toiletries, medicines and spare razors
• Soft-close mirror doors that open from a finger-pull notch, which means no handles catching a sleeve
• 5mm glass with a polished pencil edge for a clean frameless look
• Copper-free mirror backing with a resin emulsion paint coat, so steam is less likely to cause corrosion
• Solid 16mm backing board that lets screws go through the back at any point
• E1 MDF carcass in 2-pack gloss white that wipes down easily

Surface mount it, or semi-recess it into a framed wall; check the cavity depth with your builder first.

Measure the space between your vanity top and ceiling so the 720mm height sits where you want it.

Pair it with a matching vanity and a basin mixer to finish the wall.

Specifications

Dimensions (W x H x D): 900 x 720 x 150 mm
Carcass material: E1 MDF
Finish: 2-Pac gloss white
Mirror: 5 mm glass, pencil edge, copper-free
Backing board: 16 mm
Internal shelves: 3 (board)
Mounting: Wall-mounted or semi-inset into wall

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Bathroom bench cluttered with bottles? The Fienza 900mm Mirror Cabinet with Scandi Oak Side Panels gives you a mirror and a cupboard in one, with timber-look sides sized to line up with Fienza universal vanities. Hang it over the vanity and the clutter on the bench goes behind the doors. The doors are 5mm copper-free mirror with a pencil edge, and they close softly. Inside, the white interior has two tempered glass shelves you can move to fit taller bottles. The carcass is E1 MDF with a 16mm backing board, and four mounting brackets come in the box. It measures 900 x 670 x 180mm (W x H x D).

• Scandi Oak side panels that line up with Fienza universal vanities
• 5mm mirror doors with a polished pencil edge and a copper-free backing that stands up to bathroom moisture
• Soft close doors that shut quietly without slamming
• Two adjustable tempered glass shelves for tall and short items
• E1 MDF carcass with a 16mm backing board for solid wall mounting
• 900 x 670 x 180mm, with four mounting brackets supplied

It hangs on four brackets, so check your wall framing and use fixings that suit the wall. Measure the width over your vanity first.

Pair it with a Fienza universal vanity in a matching width.

Specifications

Dimensions (W x H x D): 900 x 670 x 180 mm
Carcass: E1 MDF
Side panels: Scandi Oak
Interior: White
Mirror: 5 mm pencil edge, copper-free
Shelves: 2 tempered glass, adjustable
Backing board: 16 mm
Mounting: Wall-mounted, 4 brackets

What's In The Box

• Mirror cabinet
• 4 mounting brackets

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a freestanding bath with real weight to it? The Fienza Nero 1550 Stone Bath is cast from solid surface stone in matte white, with a wide oval body that gives you room to stretch out. It measures 1550 x 770 x 520mm, has an internal depth of 425mm and holds 270 litres. The bath has an integrated overflow, and a chrome pop-up waste comes in the box. Be ready for the weight: it's 135kg on its own and 175kg packed, so plan the delivery, the lift and the path into the bathroom before it turns up. To keep the surface looking right, skip harsh, citrus and abrasive cleaners, as they scratch it.

• Cast stone solid surface in a matte white finish, so the bath feels solid rather than thin
• 1550mm long and 770mm wide with a wide oval body, which gives you space to lie back
• 425mm internal depth and a 270 litre capacity for a proper soak
• Overflow built into the bath, which helps guard against a tap left running
• Chrome pop-up waste supplied, so there's no separate waste to buy
• 135kg net and 175kg packed, which means a team lift and a planned delivery

An off-centre waste position may need floor preparation, so check with your builder or plumber before tiling and waterproofing. Measure doorways and hallways for the delivery too.

Finish it with a floor mounted bath outlet or bath filler in the finish of your choice.

Specifications

Dimensions (L x W x H): 1550 x 770 x 520 mm (Tradelink)
Internal depth: 425 mm (Tradelink)
Capacity: 270 L
Net weight: 135 kg
Gross weight: 175 kg
Material: Cast stone solid surface
Finish: Matte white
Overflow: Integrated
Waste: Chrome pop-up/pull-out, included
Mounting: Freestanding
Country of origin: China (Tradelink)

What's In The Box

• Bath
• Chrome pop-up/pull-out waste

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a proper soak in a corner that suits it? The Fienza Isabella Right-Hand Acrylic Corner Bath in Matte White is made for a right-hand corner, with two finished sides and a slim rim. It measures 1500 x 750 x 600mm, with 450mm of internal depth and a 281 litre capacity, so there's room to stretch out. The shell is UV stabilised sanitary-grade acrylic with Lucite MMA, and a steel support frame is built in, resting on adjustable feet your installer can level. The overflow is part of the bath, and a chrome waste, pop-up with a pull-out plug, comes in the box. It weighs 48kg, so plan for two people to carry it in. Wipe it down with a microfibre cloth and mild soapy water, and skip bleach, creams and citrus cleaners.

• Right-hand corner layout with two finished sides, made to tuck into the corner of the room
• 450mm internal depth and 281 litre capacity, enough water for a proper soak
• UV stabilised sanitary-grade acrylic made with Lucite MMA, built for years of daily use
• Steel support frame on adjustable feet, which makes levelling easier on uneven floors
• Overflow built in, for peace of mind if the bath is left running
• Pop-up chrome waste with a pull-out plug included, so there's no separate waste to buy
• Slim rim edge for a clean, simple look

Off-centre waste positions may need some floor preparation, so check with your builder or plumber before tiling and waterproofing. It's a two-person lift.

Pair it with a wall-mounted bath outlet and mixer in your choice of finish.

Specifications

Dimensions (L x W x H): 1500 x 750 x 600 mm (Tradelink)
Internal depth: 450 mm (Tradelink 'Depth')
Capacity: 281 L
Net weight: 48 kg
Gross weight: 56 kg
Material: UV stabilised sanitary-grade acrylic with Lucite MMA
Finish: Matte white
Handing: Right-hand
Overflow: Built-in
Waste: Chrome pull-out/pop-up, included

What's In The Box

• Bath
• Chrome pull-out/pop-up waste

Warranty

Fienza products are covered by warranties of up to 25 Years*

Fienza products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Cast Stone Structural Integrity – 25 Years replacement product
• Cast Stone Finish – 5 Years replacement product or repair
• Acrylic Structural Integrity – 10 Years replacement on bath shell
• Adjustable legs and frame – 5 Years replacement parts
• Overflow kits and wastes – 1 Year replacement parts

Basins

• Ceramic Basins – 5 Years replacement parts or product
• Cast Stone Basins – 25 Years structural integrity, 5 Years finish

Vanities

• Vanities – 5 Years replacement parts or product

Showers

• Shower Heads & Arms – 15 Years replacement parts or product
• Shower Heads – 15 Years replacement parts or product; 1 year labour on Twin Rail Showers
• Shower Hoses – 1 Year replacement product or parts

Taps, Outlets & Mixers

Mixers (not including Floor Standing Mixers)

• 15 Years labour & replacement parts on ceramic disc cartridges
• 15 Years replacement parts or product
• 5 Years replacement coloured finishes
• 1 Year labour on coloured finishes

Floor Standing Coil Mixers

• 15 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year labour

Tapware

• 5 Years ceramic disc cartridges
• 5 Years replacement product or parts
• 1 Year replacement coloured finishes
• 1 Year labour

Bath Outlets

• 15 Years replacement product or parts (no labour included)

Toilets

• Toilet suites (cisterns and pans) – 5 Years replacement product
• R&T valves and in-wall cisterns – 3 Years replacement parts, 1 year labour
• Geberit valves and in-wall cisterns – 10 Years replacement parts
• Toilet Seats – 1 Year replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Bathroom Accessories

• Coloured finishes – 5 Years replacement coloured finishes
• Accessories – 5 Years replacement parts or product
• Bevelled & Pencil Edge Mirrors – 1 Year replacement or product

For full Fienza warranty terms & conditions please visit the Fienza website. For After Sales & Service enquiries you can contact Fienza directly on (07) 3490 6700 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fixed shower rose not cutting it any more? The Nero Opal Twin Shower in Brushed Nickel gives you two showers on one rail: a 250mm round overhead and a three function hand shower. Water comes in at the top, so it connects where your current shower arm leaves the wall. The lower wall mount can sit anywhere from 580 to 680mm below that, which makes fitting it to an existing shower far simpler. A diverter on the rail sends water to whichever head you want. The hand shower rides on a metal slider you set to your own height, with a 1.5 metre hose for rinsing sandy feet or hosing down the screen. It's brass underneath, and both showers are WELS 3 star at 9 litres a minute. Also available in Brushed Bronze, Brushed Gold and Graphite.

• 250mm round overhead shower for full coverage, a real step up from a small fixed rose
• Three function hand shower with a built-in check valve, so you can change the spray to suit the job
• 1.5 metre hose that reaches every corner of the recess for rinsing and cleaning
• Top water inlet that connects at the existing wall outlet, which suits a replacement job
• Adjustable lower wall mount with 580 to 680mm of range, made for retrofitting to most existing showers
• Diverter on the rail to swap between overhead and hand shower, plus a metal slider to set the hand shower height
• Brass construction under a brushed nickel finish with a soft, low sheen

Runs on 150 to 500kPa water pressure and needs a licensed plumber to install. Ask yours to check your outlet height before you order.

The shower mixer is sold separately: an Opal shower mixer in Brushed Nickel is the matching pick, along with Opal basin mixers and towel rails.

Specifications

Overhead shower: 250mm round
Hand shower: 3 function, 130mm, built-in check valve
Hose: 1.5m PVC
Overall height: 1230.5mm
Lower wall mount: Adjustable, 580mm to 680mm below the water inlet
Water inlet: Top inlet, G1/2
Material: Brass
Finish: Brushed Nickel
WELS rating: Overhead shower 3 star, 9L/min. Hand shower 3 star, 9L/min
WELS registration: S17338
WaterMark licence: WM-060093
Pressure rating: 150kPa to 500kPa
Temperature rating: 1°C to 75°C
Note: Dimensions are nominal

What's In The Box

• 1 x Shower rail
• 1 x Shower arm
• 1 x Overhead shower head
• 1 x Hand shower with built-in check valve
• 1 x 1.5m PVC hose
• 1 x Slider bracket
• 2 x Back plates

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a shower that doubles as a grab rail? The Caroma Care Support Shower Set with Inverted T Rail in Chrome combines a hand shower with a grab rail that stands 1.1m tall and runs 700mm long. The rail is 32mm grade 304 stainless steel tube with a 1.2mm wall, and a slider holds the hand shower at the height you need. A 1.5m Silverflex hose and a double check valve are included. GermGard antimicrobial protection treats the rubber seal within each concealed flange, and it's stated to kill 99.9% of bacteria to JIS Z 2801. It's WELS 4 star at 7.5 litres a minute, and the rail is stated to meet AS 1428.1-2021. Warranty is 20 years on the product and 1 year on labour. Also available in Matte Black.

• Inverted T grab rail, 1100mm high and 700mm long, for a steady hold while showering
• 32mm grade 304 stainless steel tube with a 1.2mm wall for a strong, easy grip
• Slider keeps the hand shower at the right height for each user
• 1.5m Silverflex hose and double check valve included
• GermGard antimicrobial seal inside the concealed flanges
• WELS 4 star at 7.5 litres a minute
• Rail stated to meet AS 1428.1-2021, finished in chrome

The rail needs solid fixing into the wall frame, so confirm height and position with your builder or access consultant. Check the rail handing suits your shower layout before you order.

Add straight or angled grab rails from the Caroma Care range.

Specifications

finish/colour: Chrome
hand: Right hand (RH)
width: 32mm
height: 1100mm
length: 700mm
rail: 32mm dia x 1.2mm type 304 stainless steel
hose: 1.5m Silverflex with shower head slider
water consumption: 7.5L/min
WELS rating: 4 Star
WELS registration no: S16731
compliance: AS 1428.1-2021
installation: Wall mount
warranty: 20 Years (Products); 1 Year (Labour)
country of origin/manufacture: China
other finishes: Matte Black
tradelink item: 287297

What's In The Box

• 1.5m Silverflex hose
• shower head slider

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a shower that doubles as a grab rail? The Caroma Care Support Shower Set in Chrome combines a straight vertical grab rail with a hand shower, so the thing you hold for balance is also where the shower sits. The rail is 32mm grade 304 stainless steel tube with a 1.2mm wall, and Caroma states the rail meets AS 1428.1. A slider carries the hand shower up and down the rail, connected by a 1.5m Silverflex hose, and a double check valve is included. Inside the concealed flanges, the rubber seal has GermGard antimicrobial treatment. It's WELS 4 star at 7.5 litres a minute. Caroma gives 20 years on replacement products and 1 year on labour, so it's covered well past the install.

• Vertical grab rail and hand shower in one, for support right where you shower
• 32mm grade 304 stainless steel rail in chrome
• Slider sets the hand shower at whatever height suits the user
• 1.5m Silverflex hose for reach whether seated or standing
• GermGard antimicrobial seal inside the concealed flanges, which kills 99.9% of E. coli and Staph aureus in JIS Z 2801 testing
• Double check valve included
• WELS 4 star at 7.5 litres a minute

The rail needs solid backing in the wall; confirm the mounting height with your installer.

Add a Care Support grab rail or a folding shower seat to finish the space.

Specifications

finish/colour: Chrome
width: 32mm
height (as listed): 900mm
rail: 32mm dia x 1.2mm type 304 stainless steel
hose: 1.5m Silverflex with shower head slider
water consumption: 7.5L/min
WELS rating: 4 Star (7.5L/min)
WELS registration no: S16731
compliance: AS 1428.1
installation: Wall mount
warranty: 20 Years (Replacement Products); 1 Year Labour
country of origin/manufacture: China
other finishes: Matte Black
tradelink item: 287258

What's In The Box

• 1.5m Silverflex hose
• shower head slider

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a shower that's safer to hold on to? The Caroma Care Support Shower Set with Inverted T Rail, left-hand in Chrome, combines a sturdy grab rail with a hand shower that slides along it. The inverted T rail is 1.1m tall and 700mm long, made from 32mm grade 304 stainless steel tube with a 1.2mm wall, and Caroma states the rail design meets AS 1428.1-2021. A 1.5m Silverflex hose and slider come with it, plus a double check valve. The rail has GermGard antimicrobial protection, and the rubber seal in the concealed flanges has a treatment that kills 99.9% of bacteria. The shower is WELS 4 star at 7.5 litres a minute. Warranty is 20 years on replacement products and 1 year on labour.

• Inverted T rail, 1.1m tall and 700mm long, so there's a handhold at more than one height
• Left-hand layout, so check which side of the shower suits your room
• 32mm grade 304 stainless steel tube with a 1.2mm wall for a firm grip
• Caroma states the rail design meets AS 1428.1-2021, which helps with accessible bathroom fit-outs
• GermGard antimicrobial protection, with a flange seal that kills 99.9% of bacteria
• 1.5m Silverflex hose and slider, so the hand shower sits at the right height for you
• WELS 4 star at 7.5 litres a minute, with a double check valve included

Have your installer fix it into solid backing so it takes weight safely. This is the left-hand version, so confirm the orientation before ordering.

Pair it with Caroma Care toilet suites and grab rails for a fully supported bathroom.

Specifications

finish/colour: Chrome
hand: Left hand (LH)
width: 32mm
height: 1100mm
length: 700mm
rail: 32mm dia x 1.2mm type 304 stainless steel
hose: 1.5m Silverflex with shower head slider
water consumption: 7.5L/min
WELS rating: 4 Star (7.5L/min)
WELS registration no: S16731
compliance: AS 1428.1-2021 (rail)
installation: Wall mount
warranty: 20 Years (Replacement Products); 1 Year (Labour)
country of origin/manufacture: China
other finishes: Matte Black
tradelink item: 287285

What's In The Box

• 1.5m Silverflex hose
• shower head slider
• shower head and rail (per page, not itemised)

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Setting up a shower for someone who needs extra support? The Caroma Care Support Shower Set with Inverted T Rail (left hand) in Matte Black combines a hand shower with a grab rail that stands 1.1m tall and runs 700mm long. The rail is 32mm grade 304 stainless steel tube with a 1.2mm wall, and a slider holds the hand shower at the height you need. A 1.5m Silverflex hose and a double check valve are included. GermGard antimicrobial protection treats the rubber seal within each concealed flange, and it's stated to kill 99.9% of bacteria to JIS Z 2801. It's WELS 4 star at 7.5 litres a minute, and the rail is stated to meet AS 1428.1-2021. Warranty is 20 years on the product and 1 year on labour. Also available in Chrome.

• Inverted T grab rail, 1100mm high and 700mm long, for a steady hold while showering
• 32mm grade 304 stainless steel tube with a 1.2mm wall for a strong, easy grip
• Slider keeps the hand shower at the right height for each user
• 1.5m Silverflex hose and double check valve included
• GermGard antimicrobial seal inside the concealed flanges
• WELS 4 star at 7.5 litres a minute
• Rail stated to meet AS 1428.1-2021, finished in matte black

The rail needs solid fixing into the wall frame, so confirm height and position with your builder or access consultant. This is the left hand version, so check it suits your shower layout before you order.

Add straight or angled grab rails from the Caroma Care range.

Specifications

finish/colour: Matte Black
hand: Left hand (LH) per Tradelink page
width: 32mm
height: 1100mm
length: 700mm
rail: 32mm dia x 1.2mm type 304 stainless steel
hose: 1.5m Silverflex with shower head slider
water consumption: 7.5L/min
WELS rating: 4 Star (7.5L/min)
WELS registration no: S16731
compliance: AS 1428.1-2021
installation: Wall mount
warranty: 20 Years (Replacement Products); 1 Year (Labour)
country of origin/manufacture: China
other finishes: Chrome
tradelink item: 287284

What's In The Box

• 1.5m Silverflex hose
• shower head slider

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a shower rail you can actually lean on? The Caroma Opal Support Shower Rail Straight 900mm in Brushed Nickel is a load bearing rail that doubles as a shower slider. The 900mm straight rail is 32mm in diameter with dual fixing, and it's built to withstand 1100N of force, roughly 110kg. A slider with a push button release holds your hand shower and moves up and down to suit. It's brass under a matte brushed nickel finish, and the Opal Support range suits both home and aged care use. Hose, head and elbow fittings aren't supplied, so you can pair it with the hand shower you prefer. A practical way to add support and a height-adjustable shower in one go.

• Load bearing 900mm rail rated to 1100N, about 110kg, for real support
• 32mm diameter with dual fixing for a secure grip
• Slider with push button release to set the hand shower height
• Brass construction under a matte brushed nickel finish
• Suits home and aged care bathrooms alike
• Shower head, hose and elbow not included, so choose the set that suits you

Fix it into solid backing so it can take load safely; a qualified installer is recommended.

Add a hand shower, hose and wall elbow in brushed nickel to complete it.

What's In The Box

• Caroma Opal Support Shower Rail Straight 900mm
• Fixing Kit

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Short on floor space but still want a freestanding look? The Decina Alegra 1500 Back-To-Wall Freestanding Bath gives you both. It sits flush against the wall, so you save room and lose those awkward gaps where dust and grime like to gather. Wiping down takes seconds.

It's made in Australia from sanitary grade acrylic, with a high gloss white finish inside and out. Both ends have reclining lumbar support, so it suits one bather or two, and the centre waste keeps things even for dual bathing. No arguing over the tap end. There's a 10 year warranty behind it.

• Made in Australia from sanitary grade acrylic, so you get quality that holds up over years of use
• High gloss white exterior and interior for a clean, easy-to-wipe finish
• Reclining lumbar support at both ends with a centre waste position, ideal for dual bathing
• Adjustable self-supporting feet let you level the bath on an uneven floor
• Meets Australian Standards AS 1172.5:2019, so you can install with confidence
• Covered by a 10 year warranty for long-term reassurance

Optional plug and waste and an optional overflow are available: ask your plumber which setup suits your install.

Specifications

• Constructed material: Premium sanitary grade acrylic
• Length: 1500mm
• Width: 800mm
• Height: 600mm
• Capacity: 162L (200mm below the bath rim)
• Bath type: Back-to-wall freestanding
• Waste position: Centre
• Net weight: 60kg
• Warranty: 10 years

What's In The Box

1x Back-to-Wall Freesstanding Bath

Downloads

Download the specification sheet below:
Decina Alegra 1500 Back-To-Wall Freestanding Bath

Warranty

Decina products are covered by warranties of up to 10 Years*

Decina products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Baths – 10 Years
• Parts – 1 Year

Showers

• Shower screens – 7 Years
• Shower bases – 10 Years

Toilets

• Toilet suites (cisterns and pans) – 10 Year replacement product warranty and 1 Year parts and labour
• Seat, lid, seals & valves – 1 Year replacement warranty only

To make a warranty claim please visit the Decina Warranty Claim page for assistance.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps

• Wastes & traps – 1 Year

For After Sales & Service enquiries you can contact Decina directly on 07 3271 1944 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a steady handhold beside the toilet or in the shower? The Caroma Home Collection Straight Grab Rail 450mm gives you a solid handhold wherever you need it, and it's made for use in the home. The barrel is 32mm diameter 304L stainless steel, polished to a chrome look, and it fixes to the wall with 75mm concealed flanges for a clean finish. It's rated to withstand 1100N of force and Caroma states it complies with AS 1428:2009 for access and mobility. At 450mm long it suits a spot beside a toilet, in a shower or next to a bath. The range runs from 300mm to 900mm if you need a different length. Warranty is 5 years on replacement, with 1 year on labour, finishes, wall fixings and mounting brackets.

• 450mm straight rail, a handy length beside a toilet or bath
• 32mm diameter 304L stainless steel barrel that's comfortable to grip
• Chrome-look polished stainless steel to sit alongside chrome tapware
• 75mm concealed flanges that hide the fixings for a neat finish
• Rated to withstand 1100N, so it's built to take real weight
• Caroma states it complies with AS 1428:2009, which helps when setting up for ageing in place

Grab rails must be fixed into solid backing or noggings to hold weight, so have a qualified installer fit it.

The Caroma Home Collection runs from 300mm to 900mm, so you can match rails around the bathroom.

Specifications

length: 450mm
finish/colour: Polished stainless steel (chrome look)
tube: 32mm dia 304L stainless steel
flange: 75mm concealed
load rating: 1100N
compliance: AS1428:2009
listed dimensions (W x D x H): 95 x 92 x 78mm
weight: 0.6kg
warranty: 5 Years replacement; 1 Year labour, finishes, wall fixings, mounting brackets
country of origin/manufacture: China
tradelink item: 156701

What's In The Box

• product
• technical manual

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages