Raymor Mosman Vanity with Right Hand Basin 1200mm 2 Drawer

Plumbing already sitting on the right hand side of the wall? The Raymor Mosman Vanity with Right Hand Basin 1200mm puts the basin over there and clears the left of the bench. It's wall hung, 1207mm wide, 500mm deep and 367mm high, with two soft close drawers, fluted v-groove thermolaminated fronts and brushed nickel handles. You get a 20mm Cherry Pie solid surface benchtop, a round 400mm gloss white vitreous china basin and a space saver plumbing kit that tucks the trap behind the drawers. Pick a cabinet colour (Ultra White Matte, Prime Oak, Florentine Walnut or Topiary) and a benchtop (Grey Travertine, Alabaster or Bright White). A white gloss mushroom top pop up plug and waste is in the box. Warranty is 10 years on the cabinet, 7 on the top, runners and hinges, and 1 year on the basin, plug and waste, plumbing fittings, seals and labour.

• 1207mm wide, 500mm deep and 367mm high, so it fills a 1200mm run without sticking out into the room
• Basin on the right hand end, which frees up the left of the bench for the toothbrushes and the rest
• Wall hung with two soft close drawers, so the floor is easy to clean and nothing slams
• Fluted v-groove drawer fronts in a thermolaminated finish with brushed nickel handles
• 20mm Cherry Pie solid surface benchtop with no crystalline silica, in three finishes
• Round 400mm x 120mm gloss white vitreous china counter top basin and a white gloss mushroom top pop up plug and waste included, so you're not chasing parts
• Cabinet made in Australia from PEFC certified E0 moisture resistant MDF and HMR particle board, with 10 years warranty on the cabinet and 7 on the top, runners and hinges

Confirm the waste and tap position suit a basin at the right hand end, and remember there's no overflow on this basin. Wall hung only, so check the wall can take the fixings.

Add a Raymor basin mixer in brushed nickel to match the handles.

Cabinet material: Thermolaminated PEFC Certified E0 MR MDF and HMR particle board
Top material: Cherry Pie 20mm
Basin: Counter top basin included
Overflow: No
Doors and drawers: 2 Drawers
Installation: Wall-Hung
Width: 1207 mm
Depth: 500 mm
Height: 367 mm
Country of manufacture: Cabinet manufactured in Australia. Basin, pop up waste and plumbing kit manufactured in China
Warranty: 10 years cabinet. 7 years Cherry Pie tops, solid surface basins, hardware, runners, hinges. 1 year vitreous china basins, plug and waste, overflow rings, plumbing fittings, seals and labour. 1 year Commercial warranty

• 1 x Cabinet and Cherry Pie premium solid surface counter top
• 1 x Round vitreous china counter top basin (gloss white 400 x 120mm)
• 1 x White gloss mushroom top pop up plug and waste
• 1 x Space saving plumbing kit
• 2 x Premium brushed nickel handles

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.