Raymor Care Pin Lever Mixer Handle Suits 35mm Cartridge Chrome

Want an easy-push lever on the mixer without replacing the whole tap? The Raymor Care Pin Lever Mixer Handle in Chrome is a replacement handle, not a mixer. It fits mixers with a 35mm cartridge and gives you a 153mm pin lever that's easy to nudge with a palm, wrist or elbow, which suits people with limited grip or reach and care facilities. The handle is zinc under a chrome finish, 174.5mm wide and 30mm high. Hot/cold and warm/cold indicator inserts are included, and it can be installed to comply with AS 1428.1. Backed by a 20 year warranty on the handle and chrome finish.

• Suits 35mm cartridge mixers, so check what's inside yours first
• 153mm pin lever reach for a palm or forearm push rather than a twist
• Zinc handle in chrome, 174.5mm wide and 30mm high
• Indicator inserts for hot/cold and warm/cold in the box
• Can be installed to comply with AS 1428.1, with a 20 year warranty on the handle and chrome finish

Handle only. Confirm your mixer runs a 35mm cartridge before you buy, and have your plumber fit it if the old handle won't budge.

The Care range also has straight and angled levers in other lengths, plus grab rails, shower cradles and Care tapware.

Construction material: Zinc
Suits cartridge: 35mm cartridge
Overall length: 174.5 mm
Height: 30 mm
Country of origin: China
Warranty: 20 Years Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 Years Handpieces and pull down hoses. 5 Years PVD and Electroplate finishes.

• 1 x Care handle
• Hot/cold and warm/cold indicator inserts

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.