Oliveri Monet double bowl topmount sink drainer 1TH

Washing up needs room to move. The Oliveri Monet double bowl topmount sink drainer 1TH gives you two bowls plus a drainer, so dishes have somewhere to sit while you keep going. It sits on top of the bench and takes a single tap hole, which means it drops into most standard kitchen setups. That distinctive bowl shape has made the range a firm favourite in Aussie kitchens. It's built from stainless steel at Oliveri's Adelaide factory, so it's tough and simple to keep clean. Overall it measures 1200mm x 500mm x 195mm, with each main bowl at 350mm x 420mm. Plenty of room to wash and stack.

• Stainless steel construction that stands up to daily use and cleans up in seconds
• Two bowls at 350mm x 420mm each, so you can wash on one side and rinse or drain on the other
• Overall dimensions of 1200mm x 500mm x 195mm, giving you a generous drainer alongside the bowls
• Topmount design that drops straight onto the bench for a straightforward install
• Single tap hole (1TH) to suit a mixer or standard tap
• Available in right hand and left hand drainer, so you can match the layout to your kitchen

Check your benchtop cutout and pick the drainer side that suits your run before ordering, or ask your plumber.

• 1 x Sink
• 1 x Installation Instructions
• 1 x Topmount Clip Kit
• 2 x 90mm Basket waste
• 1 x Monet Main Bowl Colander
• 1 x Monet Main Bowl Bamboo Chopping Board

Download the specification sheet below:

Oliveri Monet double bowl topmount sink drainer 1TH

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages