Aulic Hamilton Curving Plywood Wall Hung Vanity

Want the floor clear and a vanity that looks light on the wall? The Aulic Hamilton Curving Plywood Wall Hung Vanity is a slim cabinet with curved feature ends and laminate fronts with a timber grain look, and comes in five sizes from 750mm to 1800mm. Pick your size, then your top. Every size is 460mm deep and just 350mm high with the top on, so the floor stays clear and the room looks bigger. The fronts open with an L-rail finger pull instead of handles, over a moisture resistant plywood carcase with a graphite interior.

• Five sizes from 750mm to 1800mm, all 460mm deep and 350mm high with the top on
• Laminate fronts with a timber grain look and curved feature ends, which take the hard edge off a wall hung box
• L-rail finger pull instead of handles, so there is nothing to catch a towel on
• Soft close drawers on Hettich InnoTech Atira runners, so they close quietly every time
• Moisture resistant plywood carcase with a graphite interior and a drawer organiser in the box
• Flat stone top for your own basin in Cato, Snow, Pure White, Palis White or Alpine White, or cabinet only
• 10 year warranty on the cabinet, 2 years on the top, 12 months on product and labour

Check for studs or noggins across the full width at the height you want it, and have your plumber confirm the waste sits inside the cabinet before you order. The flat stone tops come without a basin, so choose your basin at the same time, and on the 1800mm allow a waste for each basin.

An Aulic Windsor Round LED Mirror or an Aulic Valmont LED Mirror finishes the wall above it.

• 750mm: 750mm wide with the top on, suits an ensuite or compact bathroom. Cabinet only, or flat stone top in Cato, Snow, Pure White, Palis White or Alpine White
• 900mm: 900mm wide with the top on. Cabinet only, or flat stone top in Cato, Snow, Pure White, Palis White or Alpine White
• 1200mm: 1200mm wide with the top on, bench either side of a single basin. Cabinet only, or flat stone top in Cato, Snow, Pure White, Palis White or Alpine White
• 1500mm: 1500mm wide with the top on, plenty of bench once the basin is in. Cabinet only, or flat stone top in Cato, Snow, Pure White, Palis White or Alpine White
• 1800mm: 1800mm wide with the top on, enough for two basins with bench between them. Cabinet only, or flat stone top for your own basins in Cato, Pure White, Palis White or Alpine White

Cabinet material: Moisture resistant plywood, graphite interior
Cabinet finish: Timber grain laminate, curved feature ends
Top options: Flat stone (basin sold separately), or cabinet only
Drawers: Soft close drawers on Hettich InnoTech Atira runners
Installation: Wall Hung
Depth and height with top: 460mm deep, 350mm high
Country of origin: China
Warranty: Vanity: 10 years replacement product or parts. Benchtop: 2 years replacement product or parts. 12 months replacement product and labour

• 1 x Vanity cabinet
• 1 x Top, if you choose one
• 1 x Drawer organiser
• Installation instructions
• Fixing kit