Wastes, Traps & Grates

Tight behind the bath, tighter underneath? That's exactly what the ART Australia Bath Bend Pop Down® and Connector in Brushed Gun Metal Grey is built for. You get the ART plug and waste, a 600mm flexible connector and an elbow in one go, so there's room to move and adjust when the install is snug. Handy when you're replacing a bath waste and need everything to line up without a fight. The body is brass for lasting strength. Flush-mounted pop down operation means no more sitting on the waste, which your back will thank you for. The quick-remove cartridge lifts out for easy cleaning. ART Australia was previously known as Bounty Brassware.

• Flexible connector with an adjustable length up to 600mm, giving you the reach to suit a range of bath positions.
• Low height body at 77mm, which helps it fit where there isn't much clearance underneath.
• Adjusts to a bath thickness of up to 12mm, with variable screws available for different thickness baths so you get a proper fit.
• Suits both overflow and non overflow baths, so it covers most setups.
• Innovative quick-remove cartridge that pulls out for straightforward cleaning and maintenance.
• Flush-mounted operation for a neat, low-profile finish at the plughole.

Check your bath thickness and the space below before ordering, or ask your plumber to confirm the fit.

Specifications

Construction material: Brass
Outlet size: 40mm
Height: 77mm
Length: Adjustable, Max 600mm
Bath thickness: 12mm max
Max offset: 650mm max
Overflow compatible: Yes

What's In The Box

• ART Australia Bath Bend Pop Down and Connector Brushed Gun Metal Grey

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Bath waste leaking, or just looking tired? The ART Australia Bath Pop Down® Plug and Waste 40mm Polished Brass is a straightforward swap, and it suits both baths and spas. It's made for non overflow baths, so check yours before you order. The polished raw brass is uncoated and designed to patina over time, which means the finish settles and changes as the years go by. The pop-down action opens and closes quickly, and it sits flush when open: no plug digging into your back at the end of a long soak. The quick-remove cartridge pulls out for cleaning and gives you full access to the trap when service is due. There's a lifetime replacement guarantee on that cartridge too.

• Fits 40mm bath and spa outlets, so it drops in as a direct replacement for a standard waste.
• Designed for non overflow baths, which keeps the install clean and simple.
• Uncoated polished raw brass that patinas over time, so the finish develops its own character.
• Sits flush in the open position, meaning no plug to sit on and a tidier look.
• Quick-remove cartridge lifts out for easy cleaning and maintenance without tools or fuss.
• Full trap access when it comes time to service or clear the drain.
• Lifetime replacement guarantee on the cartridge for long-term peace of mind.

Confirm your bath is a non overflow style before ordering, or ask your plumber to check.

Note: this product was previously known as Bounty Brassware.

What's In The Box

• ART Australia Bath Pop Down Plug and Waste 40mm Polished Brass

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Nobody enjoys sitting on a raised bath plug. The ART Australia Bath Pop Down® Plug and Waste 40mm Brushed Gold sits flush in the open position, so that problem goes away. It's a smart replacement for a worn or dated bath waste. It suits baths and spas, and works with non overflow baths. The pop-down action opens and closes smoothly. Brushed gold helps tie your bath in with the rest of your tapware. Inside, a quick-remove cartridge lifts out for cleaning and gives full access to the trap for servicing, which makes maintenance far easier down the track. The cartridge is covered by a lifetime replacement guarantee, so you can bet it'll go the distance.

• Sits flush in the open position, which looks tidier and means no plug to sit on
• Brushed gold finish that coordinates with matching tapware for a consistent look across your bathroom
• Designed for bath and spa applications, including non overflow baths, so check your bath type before ordering
• Quick-remove cartridge lifts out easily for cleaning and general maintenance
• Full access to the trap for service work, saving time and hassle when something needs attention
• Safe design for little fingers and toes at bath time
• Lifetime replacement guarantee on the cartridge for quality you can trust

Confirm your waste outlet is 40mm before ordering, or ask your plumber to check on install.

Note: this product was previously known as Bounty Brassware.

What's In The Box

• ART Australia Bath Pop Down Plug and Waste 40mm Brushed Gold

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Push to close, push to open. That's the whole story with the ART Australia Basin Pop Down® Universal Plug and Waste 32/40mm Brushed Gold, and it's a straight swap when your old waste has had enough. It suits basins with a 32mm or 40mm outlet, with or without an overflow, so it'll fit most basins you come across. Sitting flush in the open position, it keeps the basin looking neat. The action's smooth, and the cartridge lifts out when you want to clean it or get at the drain. It's brass, so it holds up. And the brushed gold ties in nicely with matching tapware.

• Fits basins with a 32mm or 40mm outlet, with or without an overflow, covering most standard basins
• Smooth push action to open and close, with no fiddly parts to deal with day to day
• Quick-remove cartridge lifts out for easy cleaning and drain access when you need it
• Sits flush in the open position, giving a neat, low-profile look at the basin
• Made from brass so it stands up to daily use
• Backed by a lifetime replacement guarantee on the cartridge
• Worldwide patent granted or pending on the design

Check your basin's outlet size before ordering, or ask your plumber to confirm the fit.

Note: this product was previously known as Bounty Brassware.

What's In The Box

• ART Australia Basin Pop Down Universal Plug and Waste 40mm Brushed Gold

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Old bath waste gone tired, or leaking around the plug? The ART Australia Bath Pop Down® Plug and Waste 40mm in Gun Metal Grey is a smart replacement, and it suits both baths and spas. It's designed for non overflow baths, so check your bath before ordering or ask your plumber. The pop down action opens and closes smoothly, and the plug sits flush in the open position. That means a clean, low-profile finish that ties in with the rest of your tapware, and no more sitting on a knob of metal mid-soak. The quick remove cartridge lifts out for cleaning and gives you full access to the trap for servicing. Gun Metal Grey keeps the look consistent across your bathroom. Backed by a lifetime replacement guarantee on the cartridge: quality you can trust at a fair price.

• Sits flush in the open position, so you never sit on the waste again and the look stays neat
• Quick remove cartridge lifts out easily for cleaning and maintenance
• Full access to the trap, which makes servicing straightforward for your plumber
• Suitable for bath and spa applications, including non overflow baths
• Smooth opening and closing action, and no sharp edges so it's safe for little fingers and toes
• Lifetime replacement guarantee on the cartridge for long-term peace of mind

This waste is designed for non overflow baths, so confirm your bath type before ordering, or check with your plumber.

Previously known as Bounty Brassware.

What's In The Box

• ART Australia Bath Pop Down Plug and Waste 40mm Gun Metal Grey

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Worn or leaking bath waste? The ART Australia Bath Pop Down® Plug and Waste 40mm in Satin Chrome is a smart swap, sized to suit non-overflow baths and spas. It sits flush when open, so you get a clean, consistent look across the bathroom. The action is smooth, and there's no raised plug left sticking up for you to sit on. Anyone who's had a bath with a standard plug knows the feeling. Satin chrome is easy to match with tapware you've already got. The quick-remove cartridge lifts out for cleaning and opens up full access to the trap for service. There's a lifetime replacement guarantee on the cartridge too. This range was previously known as Bounty Brassware.

• Sits flush in the open position for a neater finish than a standard raised plug
• Suits non-overflow baths and spa applications, so check your bath type before ordering
• Smooth push action with no sharp edges, which is safer around little fingers and toes
• Innovative quick-remove cartridge that lifts out for easy cleaning and maintenance
• Full access to the trap when the cartridge is removed, making service straightforward
• Lifetime replacement guarantee on the cartridge for long-term peace of mind

Confirm your bath has a 40mm waste outlet and no overflow before ordering. Need a hand? Ask your plumber to check.

What's In The Box

• ART Australia Bath Pop Down Plug and Waste 40mm Satin Chrome

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Ever tried lining up a bath waste with barely any room to work in? The ART Australia Bath Bend Pop Down® and Connector in Brushed Nickel is made for exactly that. It brings together the ART Plug & Waste, a 600mm flexible connector and an elbow, so you've got room to move while you get everything sitting right. That flexibility takes the guesswork out of a new bath install, and it's just as handy when you're replacing a tired old waste. The body's solid brass finished in Brushed Nickel, so it holds up over time. A low 77mm body height helps it tuck in under the bath, and flush-mounted operation keeps the top looking neat.

• Adjustable length to a maximum of 600mm, giving you plenty of scope to route the waste around tight spaces
• Adjusts to a bath thickness of up to 12mm, with variable screws available to suit different thickness baths
• Low body height of 77mm, so it fits where clearance under the bath is limited
• Suits both overflow and non-overflow baths, so it covers most setups
• Innovative quick-remove cartridge pops out for easy cleaning and maintenance
• Flush-mounted operation means no more sitting on the waste, and a tidy finish on top

Check your bath thickness and available clearance before ordering, or ask your plumber to confirm the fit. This product was previously known as Bounty Brassware.

Specifications

• Construction material: Brass
• Outlet size: 40mm
• Height: 77mm
• Length: Adjustable, Max 600mm
• Bath thickness: 12mm max
• Max offset: 650mm max
• Overflow compatible: Yes

What's In The Box

• ART Australia Bath Bend Pop Down and Connector Brushed Nickel

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Worn bath waste letting the water out before you're ready? The ART Australia Bath Pop Down® Plug and Waste 40mm in Brushed Nickel is a smart replacement, and it suits both baths and spas. It's designed for non-overflow baths, so check your bath before ordering. The pop-down action opens and closes smoothly. In the open position the plug sits flush, giving you a neat, low-profile finish that ties in with the rest of your bathroom. No raised parts to sit on either, which anyone who's ever misjudged a long soak will appreciate. The quick-remove cartridge lifts out for easy cleaning, and you get full access to the trap for servicing. Backed by a lifetime replacement guarantee on the cartridge.

• Sits flush in the open position, giving you a neat, consistent look across your bathroom fittings
• Quick-remove cartridge lifts out for cleaning and maintenance, so keeping the waste clear is a simple job
• Full access to the trap for service and maintenance, which makes future repairs easier for your plumber
• Suits both bath and spa applications, useful whether you're replacing a standard or spa waste
• No raised waste to sit on, safer and more comfortable for little fingers and toes
• Lifetime replacement guarantee on the cartridge for long-term peace of mind

This waste is made for non-overflow baths only, so confirm your bath type before you buy. Need a hand? Ask your plumber.

Previously known as Bounty Brassware.

What's In The Box

• ART Australia Bath Pop Down Plug and Waste 40mm Brushed Nickel

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Push it once and it's done. The ART Australia Basin Pop Down® Universal Plug and Waste 32/40mm in Gun Metal Grey is a straightforward swap for a worn or leaking basin waste, and it keeps the finish consistent across your bathroom fittings. It suits basins with a 32mm or 40mm outlet, with or without an overflow, so it fits most common setups. In the everyday open position it sits flush, which keeps the look clean. It's made from brass, and the quick-remove cartridge lifts out for cleaning and drain access. That cartridge carries a lifetime replacement guarantee. Fit it once and forget about it.

• Fits basins with a 32mm or 40mm outlet, with or without overflow, covering most standard basins
• Quick-remove cartridge lifts out easily for cleaning and clearing the drain
• Lifetime replacement guarantee on the cartridge for long-term peace of mind
• Brass construction for solid, lasting quality
• Sits flush in the open position for a neat, consistent finish
• Worldwide patent granted or pending on the design
• Previously known as Bounty Brassware, so it's a familiar name in a new jacket

Check your basin outlet size and whether it has an overflow before ordering. Need a hand? Ask your plumber.

What's In The Box

• ART Australia Basin Pop Down Universal Plug and Waste 40mm Gun Metal Grey

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Basin waste gone gunky, or dripping under the vanity? The ART Australia Basin Pop Down® Universal Plug and Waste 32/40mm Satin Chrome is a straight swap. It suits basins with a 32mm or 40mm outlet, with or without an overflow, so it fits most common set-ups and keeps the look consistent across your bathroom. It sits flush in the open position for a clean finish. One quick push opens and closes it. The cartridge lifts out easily for cleaning and drain access, which makes upkeep simple down the track: no more fishing about with a coat hanger. It's built from brass for strength and a finish that holds up, and there's a lifetime replacement guarantee on the cartridge.

• Fits basins with a 32mm or 40mm outlet, with or without overflow, so it works with most standard basins
• Made from brass for solid, long-lasting build quality
• Innovative quick-remove cartridge lifts out for easy cleaning and drain access
• Sits flush in the open position for a neat, consistent look
• Lifetime replacement guarantee on the cartridge for peace of mind
• World Wide Patent Granted or Pending
• Previously known as Bounty Brassware

Check whether your basin has a 32mm or 40mm outlet before ordering, or ask your plumber if you're unsure.

What's In The Box

• ART Australia Basin Pop Down Universal Plug and Waste 40mm Satin Chrome

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Old basin plug gone grotty, or the chain finally given up? The ART Australia Basin Pop Down® Universal Plug and Waste 32/40mm in Gold is a smart replacement, in a gold finish to match the rest of your tapware. It suits basins with a 32mm or 40mm outlet, with or without an overflow, so it fits most common setups. The pop down action opens and closes with a light touch. In the everyday open position it sits flush, which keeps the look tidy. It's brass, so it lasts. And the quick-remove cartridge lifts straight out for cleaning and drain access, covered by a lifetime replacement guarantee. Handy, because hair has a way of finding the waste.

• Fits basins with a 32mm or 40mm outlet, with or without an overflow, so it works across a wide range of basins
• Smooth open and close action, with the waste sitting flush in the open position for a tidy look
• Brass construction holds up to daily use and keeps its finish over time
• Quick-remove cartridge pops out easily for cleaning and clearing the drain when needed
• Lifetime replacement guarantee on the cartridge, so you're sorted well into the future

Check your basin's outlet size (32mm or 40mm) before ordering. Need a hand? Ask your plumber.

Note: this product was previously known as Bounty Brassware.

What's In The Box

• ART Australia Basin Pop Down Universal Plug and Waste 40mm Gold

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fitting out a new basin, or pulling out a waste that's stopped sealing? The ART Australia Basin Pop Down® Universal Plug and Waste 32/40mm in Brushed Gun Metal Grey handles both jobs. It suits basins with a 32mm or 40mm outlet, with or without an overflow, so it fits most common setups. The pop-down action opens and closes smoothly. In the open position it sits flush, which keeps the look tidy and consistent across the bathroom. It's made from brass, so it feels solid and lasts, and the brushed gun metal grey finish ties in with matching tapware. The cartridge lifts straight out for cleaning and drain access. There's a lifetime replacement guarantee on that cartridge too, which is a fair go by anyone's measure.

• Fits basins with a 32mm or 40mm outlet, with or without an overflow, so it works with most basins
• Quick-remove cartridge pulls out for easy cleaning and access to the drain
• Lifetime replacement guarantee on the cartridge, giving you peace of mind for the long haul
• Brass construction for durability and a solid feel
• Sits flush in the open position for a tidy, uniform finish
• Worldwide patent granted or pending on the design

Previously known as Bounty Brassware. Check your basin's outlet size before ordering, or ask your plumber.

What's In The Box

• ART Australia Basin Pop Down Universal Plug and Waste 40mm Brushed Gun Metal Grey

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Floor wastes do quiet work, and a good one lasts decades. The ART Australia Organics Slotted Floor Waste 100mm Polished Brass keeps water draining away neatly, whether you're swapping out a tired old waste or fitting out a new bathroom or laundry. It suits any wet area where you want the floor to drain cleanly without a fuss. It's made from solid cast and forged brass, so it stands up to daily use and holds its finish. It measures 112mm x 112mm x 21mm with a 100mm outlet size, so you get a tidy footprint that fits standard drainage. Installation is straightforward, and there's a protective cover in the box to guard the waste while your tiler works. Handy, that: tilers aren't known for their gentle touch.

• Solid cast and forged brass construction, so it handles years of water and wear
• 100mm outlet size that connects to standard drainage
• Compact 112mm x 112mm x 21mm profile that sits neatly in the floor
• Slotted grate design for steady, unobtrusive drainage
• Protective cover included to prevent damage during tiling
• Easy installation for a quick swap or fresh fit-out

Check your outlet size and floor build-up before ordering, or ask your plumber to confirm the fit.

Also available in Brushed Gold, Chrome, Matte Black and Brushed Nickel.

What's In The Box

• ART Australia Organics Slotted Floor Waste 100mm Polished Brass

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Pulling out a plug that sticks, or fitting out a new bath? The ART Australia Bath Pop Down® Plug and Waste 40mm Gold gives you smooth, one-touch opening and closing. It suits non-overflow baths and spas, and it sits flush in the open position, so there's nothing raised to sit or step on while you're in there. The polished gold finish carries the same look through the rest of your fittings. The quick-remove cartridge lifts straight out for cleaning and opens up full access to the trap. And there's a lifetime replacement guarantee on that cartridge, which is a fair go by anyone's measure. Fit it once and get on with your bath.

• 40mm outlet designed for bath and spa applications, matching common waste connections.
• Suitable for non-overflow baths, so check your bath type before ordering.
• Innovative quick-remove cartridge pulls out easily for cleaning and clears any build-up fast.
• Sits flush in the open position, giving you a tidy finish with nothing raised to catch on.
• Smooth push action opens and closes with no sharp edges, keeping it safe around little fingers and toes.
• Full trap access makes service and maintenance straightforward for your plumber.
• Lifetime replacement guarantee on the cartridge backs the quality for the long run.

Confirm your bath outlet is a 40mm fitting before you buy, or ask your plumber to check.

Note: ART Australia was previously known as Bounty Brassware.

What's In The Box

• ART Australia Bath Pop Down Plug and Waste 40mm Gold

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Water needs somewhere to go, and a floor waste is what gets it there. The ART Australia Organics Slotted Floor Waste 100mm Brushed Nickel handles the everyday run-off in a bathroom or laundry, so it clears away neatly. It suits new bathrooms and straight swaps where you want a tidier grate. The body is solid cast and forged brass, finished in durable Brushed Nickel PVD for a look that holds up over time. The 100mm outlet is a common size, so it slots into many existing setups. Still worth confirming before you buy. At 112mm x 112mm x 21mm, the slotted grate stays simple and low-profile. It's part of the Organics range, which offers five grate options to suit different bathrooms.

• Solid cast and forged brass construction for strength and a long service life
• 100mm outlet size that matches many standard floor waste installations
• Brushed Nickel PVD finish that resists wear and keeps its colour
• Compact 112mm x 112mm x 21mm footprint, so it sits neatly into the floor
• Includes a protective cover, which means the grate stays safe while your tiler works
• Designed for easy installation to keep your plumber's job straightforward

Check your outlet size and floor build-up before ordering, or ask your plumber to confirm the fit.

Also available in Matte Black, Chrome, Polished Brass and Brushed Gold.

What's In The Box

• ART Australia Organics Slotted Floor Waste 100mm Brushed Nickel

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Leaking basin waste, or a plug that won't hold water? The ART Australia Basin Pop Down® Universal Plug and Waste 32/40mm in Brushed Nickel is a straight swap. It suits basins with a 32mm or 40mm outlet, with or without an overflow, so it covers most jobs. A quick push opens and closes it, and it sits flush when open for a tidy look at the basin. The body's brass with a brushed nickel finish, so it lasts and it matches the rest of your tapware. Best part: the cartridge lifts straight out for cleaning and drain access, which beats fishing about with a coat hanger. There's a lifetime replacement guarantee on that cartridge too.

• Fits basins with a 32mm or 40mm outlet, with or without overflow, so it works across most basins
• Quick-remove cartridge lifts out easily for cleaning and getting at the drain
• Sits flush in the open position, giving you a tidy, consistent look at the basin
• Smooth quick close action that's easy to use day to day
• Made from brass for strength and a finish that holds up
• Lifetime replacement guarantee on the cartridge for long-term peace of mind
• Worldwide patent granted or pending on the design

Check whether your basin has an overflow before you order. Need a hand? Ask your plumber. This waste was previously known as Bounty Brassware.

What's In The Box

• ART Australia Basin Pop Down Universal Plug and Waste 40mm Brushed Nickel

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Water has to go somewhere, and the floor waste is what makes that happen. The ART Australia Organics Slotted Floor Waste 100mm in Brushed Gold drains your shower or bathroom floor and looks neat doing it. It suits new builds and replacements alike, with a 100mm outlet size that covers most standard setups. The body's solid cast and forged brass, so it'll take years of daily use. The slotted grate keeps things understated. Brushed Gold PVD resists tarnish and wear, which means the warm tone stays put rather than fading on you. At 112mm x 112mm x 21mm it sits low and tidy once installed. There's even a protective cover so your tiler can't ruin it.

• Solid cast and forged brass construction for strength that lasts in a wet area
• Brushed Gold PVD finish holds its colour and resists everyday wear
• 100mm outlet size fits most standard drainage, making swaps straightforward
• Slotted grate design lets water disappear quickly with a clean finish
• Compact 112mm x 112mm x 21mm footprint sits flush with your floor
• Includes a protective cover to keep the grate safe during tiling

Check your existing outlet size before ordering, or ask your plumber to confirm the fit.

Also available in Matte Black, Chrome, Polished Brass and Brushed Nickel.

What's In The Box

• ART Australia Organics Slotted Floor Waste 100mm Brushed Gold

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Water needs somewhere to go, and the floor waste is what makes that happen. The ART Australia Organics Slotted Floor Waste 100mm Matte Black does that job in a bathroom or shower floor, so it's a straightforward pick whether you're building new or pulling out an old, worn or corroded waste. The 100mm outlet suits standard drainage setups. The slotted grate clears water quickly and neatly. It's cast and forged brass, so it holds up to constant wet-area use, and Matte Black keeps things understated underfoot. At 112mm x 112mm x 21mm it sits flush and low against your tiles. There's a protective cover in the box too, which keeps the grate safe while your tiler works. One less thing to explain on site.

• Solid cast and forged brass construction for durability that stands up to daily wet-area use
• 100mm outlet size that matches common drainage requirements
• Slotted grate design so water drains away quickly and cleanly
• Compact 112mm x 112mm x 21mm footprint that sits neatly into your floor
• Matte Black finish for a subtle, consistent look
• Includes a protective cover to prevent damage during tiling
• Straightforward to install for your plumber

Confirm your outlet size and floor build-up before ordering. Need a hand? Check with your plumber.

Also available in Brushed Gold, Chrome, Polished Brass and Brushed Nickel.

What's In The Box

• ART Australia Organics Slotted Floor Waste 100mm Matte Black

Warranty

ART Australia offers 2 Year Warranty*

Excludes disposable and single use products including test caps and plugs, dust caps etc.

Should any of our products not perform to your satisfaction and/or for product specific warranty periods, please contact ART Australia on the phone number (02) 9896 7760. Their customer service team will professionally deal with your enquiry.

To view the ART Australia Warranty Document, click here. 

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Waste letting the water out overnight? The Phoenix 40mm Universal Flat Pop-Up Waste in Matte Black is a straightforward swap for a tired or leaking basin waste. It suits both overflow and non-overflow basins and baths specifying a 32mm waste, so it fits a wide range of setups. Press the button and it opens. Press again and it closes. No fishing around for a plug on a chain. The plug pulls right out when it's time to clean, and it connects to 40mm pipework to Australian standards. The flat top keeps the profile slim and modern, and matte black is easy to match with your tapware. Australian designed and backed by the Phoenix Tapware warranty: quality you can trust at a fair price.

• Push-button pop-up action opens and closes the waste with a simple press, so no fiddly plug on a chain
• Suits both overflow and non-overflow basins and baths specifying a 32mm waste, covering most common installs
• Connects to 40mm pipework to Australian standards for a compliant fit
• Plug pulls out for easy cleaning, so you can clear hair and debris in seconds
• Flat top design keeps the profile slim and modern where it sits in your basin or bath
• Matte black finish coordinates neatly with matching tapware

Check that your basin or bath specifies a 32mm waste before ordering, or ask your plumber if you're unsure.

Also available in chrome, gunmetal, brushed nickel and brushed gold.

What's In The Box

• Phoenix 40mm Universal Flat Pop-Up Waste Matte Black

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Old waste sticking, or the plug gone grubby? The Phoenix 40mm Universal Flat Pop-Up Waste in Brushed Nickel is a simple swap for basins and baths that specify a 32mm waste, in both overflow and non-overflow setups. It connects to 40mm pipework to Australian standards, so it drops in where your existing waste sits. Press the top and it opens. Press again and it closes. No fiddly lever linkages behind the basin. The plug pulls right out for cleaning, which is handy given what collects down there. The flat top keeps the profile slim, finished in electroplated brushed nickel to match your tapware. Australian designed by Phoenix Tapware and backed by the Phoenix Tapware warranty, it's quality you can trust at a fair price.

• Suits both overflow and non-overflow basins and baths that specify a 32mm waste, so it fits most standard replacements
• Push-button pop-up action opens and closes with a simple press on top: no fiddly lever linkages
• Connects to 40mm pipework to Australian standards for a compatible, code-correct install
• Pull-out plug lifts free for quick cleaning and clearing of hair and grime
• Flat-top design keeps the profile slim and modern in the basin or bath
• Electroplated brushed nickel finish coordinates with matching Phoenix tapware

Check that your basin or bath is specified for a 32mm waste before ordering, or ask your plumber if you're unsure.

Also available in electroplated chrome, matte black, gunmetal and brushed gold.

What's In The Box

• Phoenix 40mm Universal Flat Pop-Up Waste Brushed Nickel

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Wastes only get noticed when they stop working. The Phoenix 40mm Universal Flat Pop-Up Waste in Brushed Gold is a practical replacement for basins and baths that specify a 32mm waste, and it suits both overflow and non-overflow fittings, so it works across a wide range of setups. Push the top button and the plug pops up or seals down. Pull it out completely and cleaning takes seconds, which beats fishing around with a coat hanger. The flat top keeps the profile slim and modern where it meets the basin. Australian designed and connecting to 40mm pipework to Australian standards, with a brushed gold electroplated finish to match your tapware. Backed by the Phoenix Tapware warranty: quality you can trust at a fair price.

• Suits both overflow and non-overflow basins and baths that specify a 32mm waste, giving you flexibility across different fittings
• Push-button pop-up plug opens and closes easily, for simple day-to-day use
• Plug pulls out fully, so cleaning out hair and debris is quick
• Connects to 40mm pipework to Australian standards, which keeps installation straightforward for your plumber
• Flat-top design keeps the profile slim and modern where it meets the basin
• Brushed gold electroplated finish coordinates with matching tapware for a consistent look

Check that your basin or bath specifies a 32mm waste before ordering, or ask your plumber if you're unsure.

Also available in chrome, matte black, gunmetal and brushed nickel.

What's In The Box

• Phoenix 40mm Universal Flat Pop-Up Waste Brushed Gold

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

It's the little bits that give a bathroom away, and a chrome plug in a matte black basin is one of them. The Caroma Basin Dome Pop Up Waste Long in Matte Black is a direct replacement waste for your Caroma basin, so you can finish the job in a colour that matches your tapware. Swapping out a tired old plug, or fitting out a brand new basin? Either way, this dome pop-up keeps the look consistent right down to the small details. The matte black finish is highly durable and coordinates with matching taps and showers, so your basin plug and toilet hinges tie in with the rest of the room rather than standing out.

• Designed to suit the Caroma Urbane II basin range, so it drops in without guesswork
• Built specifically to fit Caroma's Liano II, Urbane II or Contura II basins, which means a proper seal and correct fit
• Matte black finish matches your matte black tapware for a consistent look across the bathroom
• Part of Caroma's colour kit approach, letting you customise your bathroom to your own style

Please note: this plug and waste fits Caroma's Liano II, Urbane II or Contura II basins only. It will not fit other basins, so check your basin model before ordering or ask your plumber. Caroma also offer a separate 40mm bath pop-up plug and waste designed specifically for bath applications.

What's In The Box

• Caroma Urbane II Basin Dome Pop Up Plug & Waste

Downloads

Download the installation instructions below:

Caroma Basin Dome Pop Up Waste Long - Matte Black

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Old plug worn out, or finishing off a new basin? The Caroma Basin Dome Pop Up Waste Long in Brushed Brass is a straight replacement that tidies up the drain and matches your tapware while it's at it. It's made to suit the Caroma Urbane II basin range, so a swap or a fresh install keeps the same finish from tap right through to waste. The Brushed Brass finish is durable and carries the look across your basin plugs, tapware and accessories. Caroma is a brand trades have relied on for years, so it's quality you can trust at a fair price. Small part, big difference.

• Dome pop up design for simple open-and-close control at the basin
• Made to suit the Caroma Urbane II basin range, so it fits neatly where those basins are installed
• Brushed Brass finish that matches Caroma Urbane II tapware and accessories, for a consistent look through your bathroom
• Durable finish built to hold up to daily use

Please note this plug and waste is designed specifically to fit Caroma's Liano II, Urbane II or Contura II basins. It won't fit other basins, so check your basin model before ordering. Need a hand? Ask your plumber. For baths, Caroma make a separate 40mm bath pop-up plug and waste designed for that job.

Team it with the matching Caroma Urbane II tapware and accessories to complete the look.

What's In The Box

• Caroma Urbane II Basin Dome Pop Up Plug & Waste

Downloads

Download the installation instructions below:

Caroma Basin Dome Pop Up Waste Long - Brushed Brass

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Down to the plug, the details matter. The Caroma Basin Dome Pop Up Waste Long in Chrome is the finishing piece for your Urbane II basin, giving you a matching waste that ties in with your chrome tapware. Replacing a tired or leaking waste? Fitting out a new basin? Either way, it keeps the whole set-up looking consistent. The chrome finish is hard-wearing and easy to keep clean, so it holds up to daily use. And it saves you hunting around for a mismatched part that never quite looks right.

• Made to suit the Caroma Urbane II basin range, so it fits and finishes the job neatly
• Chrome finish matches your chrome tapware for a coordinated look across the basin
• Dome pop-up design that's simple to operate day to day
• Long body to suit the basin depth it's built for

Please note: this plug and waste is designed specifically to fit Caroma's Liano II, Urbane II or Contura II basins. It won't fit other basins, so check yours before ordering. Need a hand? Ask your plumber.

For baths, Caroma makes a separate 40mm bath pop-up plug and waste designed for that application.

What's In The Box

• Caroma Urbane II Basin Dome Pop Up Plug & Waste Chrome

Downloads

Download the installation instructions below:

Caroma Basin Dome Pop Up Waste Long - Chrome

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

The waste is the last thing you fit and the first thing people notice up close. The Caroma Basin Dome Pop Up Waste Long in Gunmetal finishes the basin off properly, so the look carries right down to the plug. It's made to suit Caroma's Urbane II basin range, which makes it the one to grab if you're fitting or replacing an Urbane II basin. The gunmetal finish is built to last and matches Caroma's gunmetal tapware and accessories, so your finishes stay consistent across the bathroom. Push to open, push to close. No chain to lose, no fiddling about. A practical, quality pick that ties the whole setup together.

• Long dome pop up design, so a simple push opens and closes your basin waste
• Made to suit the Caroma Urbane II basin range, so it sits and fits as intended
• Gunmetal finish matches Caroma gunmetal tapware and accessories for a consistent look throughout the bathroom
• Durable colour finish that holds up to everyday use

Please note: this plug and waste is designed to fit Caroma's Liano II, Urbane II or Contura II basins only. It won't fit other basins, so check your basin model before ordering. Need a hand? Ask your plumber.

Caroma also offers a separate 40mm bath pop-up plug and waste made specifically for bath applications.

What's In The Box

• Caroma Urbane II Basin Dome Pop Up Plug & Waste

Downloads

Download the installation instructions below:

Caroma Basin Dome Pop Up Waste Long - Gunmetal

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

The drain is the one bit people forget until it's the only mismatched thing left in the room. The Caroma Basin Dome Pop Up Waste Long in Brushed Nickel is the finishing detail for your Caroma Urbane II basin. Swapping out a tired plug and waste, or fitting out a new basin? Either way, this pop up waste keeps your fittings looking consistent right down to the drain. The Brushed Nickel finish is made to match the Urbane II tapware and accessories, so your basin, taps and plug all pull together. It's built to last, with a durable finish that stands up to daily use. Choose this option to complete the look across your bathroom.

• Designed to suit the Caroma Urbane II basin range, so it fits straight in without guesswork
• Brushed Nickel finish matches your Urbane II tapware for a consistent look across the room
• Durable colour finish that holds up to everyday use around the basin
• Also available in finishes to match the wider Urbane II range, letting you carry the look through the whole bathroom

Please note: this plug and waste is designed specifically to fit Caroma's Liano II, Urbane II or Contura II basins and will not fit other basins. Check your basin model before ordering, or ask your plumber. For baths, Caroma make a separate 40mm bath pop-up plug and waste designed for bath applications.

Team it with the matching Caroma Urbane II Brushed Nickel tapware and accessories to complete the look.

What's In The Box

• Caroma Urbane II Basin Dome Pop Up Plug & Waste

Downloads

Download the installation instructions below:

Caroma Basin Dome Pop Up Waste Long - Brushed Nickel

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fitted a wall hung basin and left with a plastic trap on full view? The Caroma 40mm Bottle Trap in Brushed Brass sorts that out. It's a straight swap for the waste under a wall hung basin or vanity, with a 40mm connection to suit. The body's brass, so it's strong and should outlast the rest of your bathroom. The PVD brushed brass finish holds its colour and wears well over time. Two kee seals come in the box, which means you're covered for either copper or plastic connections. Not every part of a bathroom deserves to be hidden in a cupboard.

• 40mm connection to suit wall hung vanities and basins
• Brass construction for lasting strength through daily use
• PVD brushed brass finish that stays looking good over the years
• Replaces the standard plastic trap with something worth showing off under an exposed basin
• Supplied with 2 kee seals for copper or plastic connections

Check that your basin has a 40mm connection before ordering, or ask your plumber if you're unsure.

What's In The Box

• Caroma Urbane II 40mm Bottle Trap

Downloads

Download the installation instructions below:

Caroma 40mm Bottle Trap - Brushed Brass

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fitted a wall hung basin and now you're staring at a white plastic trap? The Caroma 40mm Bottle Trap in Gunmetal is the easy fix. It does the same job as the standard trap, it just looks a lot better doing it. The body's brass, so it'll handle years of use and outlast plenty of what's around it. The design is exposed, meaning the trap is on show, and the PVD gunmetal finish keeps it looking sharp down there. It connects at 40mm and comes with 2 kee seals, so it'll join to copper or plastic pipework. A simple way to make the plumbing below match the effort you've put in above.

• Brass construction that stands up to years of daily use, so you won't be back replacing it in a hurry
• PVD gunmetal finish for a durable, quality look that suits an exposed trap on show under the basin
• 40mm connection, made to suit wall hung vanities and basins with a matching 40mm outlet
• Supplied with 2 kee seals, so it connects to either copper or plastic pipework
• A tidy replacement for the standard plastic trap, turning a functional fitting into a feature

Check your basin's connection is 40mm before ordering, or ask your plumber to confirm the fit.

What's In The Box

• Caroma Urbane II 40mm Bottle Trap

Downloads

Download the installation instructions below:

Caroma 40mm Bottle Trap - Gunmetal

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Bath waste leaking, or the old plug gone missing? The Caroma Bath Pop-up Plug & Waste in Brushed Brass sorts both, and it's a smart pick when you're kitting out a new bath. It uses a 40mm connection with spacer, so it drops in where you need it. The pop-up mechanism is built specifically for bath applications, giving you an easy open-and-close action. No separate plug to lose down the back of the vanity. The finish is a PVD brushed brass, applied for lasting colour and shine that stands up to daily use. It's a clean, minimalist look that sits well with a range of bath styles and pairs neatly with brushed brass tapware.

• 40mm plug and waste with spacer, sized for a direct swap on most baths
• Pop-up function designed for bath use, so you get simple operation and no loose plug to keep track of
• PVD brushed brass finish for a hard-wearing surface that keeps its warm tone over time
• Sleek, minimalist styling that complements a wide range of baths and coordinates with your tapware

Check your bath's waste outlet size before ordering, or ask your plumber to confirm the 40mm fitting suits your setup.

Team it with your brushed brass tapware to finish the look.

What's In The Box

• Caroma Bath Pop-up Plug & Waste
  

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Under a wall hung basin, the pipework is on show whether you like it or not. The Caroma 40mm Bottle Trap in White tidies it up. It suits wall hung vanities and basins with a 40mm connection, so it's an easy match for most wall hung setups, and a simple swap if you're pulling out a standard plastic trap. It's built from high-quality brass, so it's made to last through years of use and outlive the bathroom around it. The matte white finish keeps things clean and low-key. Two kee seals come in the box to suit either copper or plastic connections, so you're covered whichever way your plumbing runs.

• Brass construction that stands up to years of daily use, so you're not swapping it out again in a hurry
• Matte white finish for a clean look under a wall hung basin
• Sized for a 40mm connection, matching most wall hung vanities and basins
• Supplied with 2 kee seals, covering both copper and plastic connections
• Turns exposed pipework into a finished detail rather than something you'd rather hide

Check your basin's connection is 40mm before ordering, or ask your plumber to confirm.

What's In The Box

• Caroma Urbane II 40mm Bottle Trap

Downloads

Download the installation instructions below:

Caroma 40mm Bottle Trap - White

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Leaking, sticking, or just looking past its best? A tired bath plug is one of the easiest things to put right. The Caroma Bath Pop-up Plug & Waste in Matte Black is a 40mm plug and waste with spacer, built to replace worn or damaged parts and get your bath working properly again. It's a straightforward swap. The pop-up function is designed specifically for bath applications, so it seals well and operates smoothly. The matte black finish is durable and made to match your tapware, so the look stays consistent across the room. It's part of the Caroma Urbane II colour range, which means one finish can carry through your taps, showers, basin plugs and toilet hinges.

• 40mm plug and waste with spacer, sized to suit standard bath outlets for an easier replacement
• Pop-up function designed for bath use, so it opens and seals with a simple push
• Durable matte black finish that stands up to daily use and coordinates with your matching tapware
• Part of the Caroma Urbane II colour range, so you can match plugs and hinges to your taps and showers

Check your bath outlet size before ordering, or ask your plumber to confirm the fit.

Team it with the matching Caroma Urbane II range to finish the look.

What's In The Box

• Caroma Bath Pop-up Plug & Waste
  

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Under an exposed wall hung basin, the trap is on show, so it may as well look the part. The Caroma Urbane II 40mm Bottle Trap in Matte Black is a smart swap for the standard plastic one. It suits wall hung vanities and basins with a 40mm connection, which covers both replacements and new installs. It's made from high-quality brass, so it'll outlast years of use and everyday wear. The matte black finish is clean and considered, and it pairs neatly with the wider Urbane II range. Two kee seals come in the box to suit copper or plastic connections, so installation stays flexible. Practical, tough and finished well: quality you can trust at a fair price.

• Brass construction that outlives your bathroom, so you get long service and reliable performance
• 40mm connection to match wall hung vanities and basins fitted with a 40mm outlet
• Matte black finish for a tidy, coordinated look under an exposed basin
• Supplied with 2 kee seals, so it connects to copper or plastic pipework without extra parts
• Swaps out a plain plastic trap for a piece that looks good on show, no hiding it behind a curtain

Check your basin outlet is a 40mm connection before ordering, or ask your plumber to confirm.

Team it with the matching Urbane II range to complete the look.

What's In The Box

• Caroma Urbane II 40mm Bottle Trap

Downloads

Download the installation instructions below:

Caroma Urbane II 40mm Bottle Trap Matte Black

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages