Raymor

Two towels squashed onto one bar? The Raymor Edge II Double Towel Rail 635mm in Black puts two square bars side by side on one bracket, so a pair of bath towels dry flat instead of overlapping. The 635mm width suits an ensuite or a smaller bathroom, and the 120mm projection leaves room between the bars for air to move. It's solid brass under a black finish, with installation instructions supplied. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel, and in a 785mm length.

• Two bars side by side, which doubles your hanging space on one wall
• 635mm wide, a sensible fit for an ensuite or a compact bathroom
• Solid brass with a black finish that won't tarnish in steam
• 120mm projection, so both towels get airflow and dry properly
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use decent anchors in tile, and ask your handyman or plumber if you're not sure.

Match it with Edge II single rails, robe hooks and roll holders, or step up to the 785mm double rail for a longer wall.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Shower soap dish cracked or gone grubby? The Raymor Edge II Metal Soap Dish in Black is a solid brass dish with a powder coated matte black finish, built to hold a bar of soap beside the basin or in the shower. It's the square Edge II shape, 206mm wide, 24mm high and 120mm deep, so a full bar sits in it with room to drain. Being metal, not plastic, it won't crack or discolour. Installation instructions are in the box. Backed by a 10 year warranty on the body and fittings, 5 years on the finish, 1 year on seals and labour.

• Solid brass dish, so it won't crack or yellow like a plastic one
• Powder coated matte black finish that suits black tapware and shower fittings
• 206mm wide with a 120mm projection, room enough for a big bar of soap
• Squared Edge II shape that lines up with the rest of the range
• 10 year warranty on the body and fittings, 5 years on the finish, 1 year on seals and labour

Wall mounted. Seal the fixing holes if it's going in the shower, and check for pipes before drilling.

Match it with Edge II towel rails, robe hooks and roll holders in Black.

Specifications

Construction material: Brass
Overall length: 206 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Metal soap dish
• Installation Instructions

Roll holder that's more wobble than holder? The Raymor Edge II Toilet Roll Holder in Black is a single arm holder with a square profile, made for bathrooms with Edge II or other angular tapware. It's solid brass in a black finish, so nothing snaps or rusts. It's 174mm wide and sits 72.5mm out from the wall, taking a standard roll you can swap with one hand. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• Single arm, so changing the roll is a one-handed job
• Solid brass body that stays firm and won't corrode in a damp toilet
• Square profile with a black finish that lines up with Edge II tapware
• 174mm wide and 72.5mm off the wall, which keeps it neat in a narrow toilet
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it where you can reach it from the seat, and check for pipes before you drill.

Prefer somewhere to rest your phone? The Edge II Roll Holder with Shelf does that. Otherwise match this one with Edge II robe hooks and towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 174 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Need a couple of hooks that match square tapware? The Raymor Edge II Robe Hook in Brushed Nickel is a slim single hook with a square profile, made to hang a towel or robe next to the shower or behind the door. It's small, 53mm high and just 33mm off the wall, so it tucks in where a bigger hook would get in the way. Solid brass in a brushed nickel finish. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• Slim square hook, so it fits on a narrow strip of wall or tile
• Solid brass that won't bend under a wet bath towel
• Brushed nickel finish that matches Edge II tapware and rails
• 33mm projection, which keeps it low profile in a tight space
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed. Use a wall plug in plasterboard or tiles and check for pipes before drilling.

Grab two or three, then match them with Edge II towel rails, roll holders and a soap dish in the same finish.

Specifications

Construction material: Brass
Overall length: 19 mm
Projection: 33 mm
Height: 53 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Fixing Kit
• Installation Instructions

Kitting out a new ensuite and want the toilet to match the taps? The Raymor Edge II Toilet Roll Holder in Brushed Nickel is a single arm holder with a square profile, made for bathrooms with Edge II or other angular tapware. It's solid brass in a brushed nickel finish, so nothing snaps or rusts. It's 174mm wide and sits 72.5mm out from the wall, taking a standard roll you can swap with one hand. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• Single arm, so changing the roll is a one-handed job
• Solid brass body that stays firm and won't corrode in a damp toilet
• Square profile with a brushed nickel finish that lines up with Edge II tapware
• 174mm wide and 72.5mm off the wall, which keeps it neat in a narrow toilet
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it where you can reach it from the seat, and check for pipes before you drill.

Prefer somewhere to rest your phone? The Edge II Roll Holder with Shelf does that. Otherwise match this one with Edge II robe hooks and towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 206 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions

After a wide double rail with square lines? The Raymor Edge II Double Towel Rail 785mm in Brushed Nickel is the longer Edge II double rail, with twin square bars stretching 785mm along the wall. Hang two bath sheets flat, or towels behind and a bath mat in front. Both bars sit 120mm from the wall so nothing sits damp against the tiles. It's solid brass throughout with a brushed nickel finish, instructions included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• 785mm long, so two bath sheets hang flat without overlapping
• Twin square bars on one set of fixings, for double the towel space
• Solid brass build with a brushed nickel finish that handles a steamy main bathroom
• 120mm projection that keeps both towels clear of the wall and each other
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long needs solid fixing at both ends, so find the studs or use good tile anchors.

Wall too short? The Edge II double rail also comes at 635mm, with single rails, hooks and roll holders to match.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Replacing a rail and want square lines to match the taps? The Raymor Edge II Double Towel Rail 635mm in Brushed Nickel puts two square bars side by side on one bracket, so a pair of bath towels dry flat instead of overlapping. The 635mm width suits an ensuite or a smaller bathroom, and the 120mm projection leaves room between the bars for air to move. It's solid brass under a brushed nickel finish, with installation instructions supplied. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome, and in a 785mm length.

• Two bars side by side, which doubles your hanging space on one wall
• 635mm wide, a sensible fit for an ensuite or a compact bathroom
• Solid brass with a brushed nickel finish that won't tarnish in steam
• 120mm projection, so both towels get airflow and dry properly
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use decent anchors in tile, and ask your handyman or plumber if you're not sure.

Match it with Edge II single rails, robe hooks and roll holders, or step up to the 785mm double rail for a longer wall.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Matching the accessories to square Edge II tapware? The Raymor Edge II Single Towel Rail 635mm in Brushed Nickel is a straight, square-profile rail that takes one bath towel with room to spare. It's solid brass with a brushed nickel finish, so it won't sag or rust over the years. At 635mm wide, 24mm high and 71.5mm deep it sits close to the wall and clears a swinging door in most bathrooms. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Chrome.

• Solid brass rail, so it stays straight under a wet bath towel
• 635mm wide, which fits a full size bath towel folded once
• 71.5mm projection that keeps the towel off the wall to dry
• Brushed nickel finish that wipes clean and matches Edge II tapware
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use the right anchors for tile and plasterboard, and check for pipes before drilling.

Edge II also does a 785mm rail, shelves, roll holders and square tapware in the same three finishes.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Hand towel always ending up on the vanity? The Raymor Edge II Hand Towel Holder in Brushed Nickel is a short, squared rail sized for a hand towel next to the basin, in an ensuite or a powder room where a full rail won't fit. It's brass with a brushed nickel finish, so it shrugs off wet hands and cleaning. At 239mm wide, 30mm high and 72.5mm deep it sits neatly under a mirror or beside the vanity. Fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• 239mm rail sized for a hand towel, which suits powder rooms and tight ensuites
• Brass build with a brushed nickel finish that resists tarnish and wipes clean
• 72.5mm projection, so the towel hangs clear of the wall and dries faster
• Fixing kit and installation instructions supplied
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with the supplied fixings. Check for pipes and cables before you drill next to the basin.

Match it with Edge II full towel rails, the soap holder, robe hooks and square tapware.

Specifications

Construction material: Brass
Overall length: 239 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel holder
• Fixing Kit
• Installation Instructions

Soap sliding around the edge of the basin? The Raymor Edge II Soap Holder in Brushed Nickel gives a bar of soap a proper home on the wall, out of the puddle. Squared like the rest of the Edge II range, it's brass with a brushed nickel finish, so it won't stain or corrode. It's 206mm wide, 24mm high and 120mm deep, which suits a shower wall or the space beside the basin. A fixing kit and installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• Wall-mounted soap dish, so the bar dries between uses instead of sitting in water
• Brass construction with a brushed nickel finish that holds up in the shower
• 206mm wide and 120mm deep, enough for a full bar without crowding the wall
• Fixing kit and installation instructions included, ready for a quick fit
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall using the supplied kit. Use tile plugs on tiled walls and check for pipes before drilling.

Edge II also covers towel rails, shelves, hand towel holders and square tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 206 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Soap holder
• Fixing Kit
• Installation Instructions

Need a long ceiling arm for a rain shower in a tall room? The Raymor Ceiling Mount Straight Round Shower Arm 450mm in Black is the longest of the round ceiling arms, built for high ceilings where a short arm would leave the rose too far above your head. It's arm only, a straight round length of brass, so you choose the rose separately and match the size to the room. The ceiling flange and installation instructions are in the box. You get 20 years of warranty on the brass arm, with the finish covered for 20 years in Chrome and 5 years in Black, and 1 year on seals and labour. Also available in Chrome, and in 200mm and 300mm drops if the ceiling isn't that high.

• Long straight drop for tall ceilings, so the spray lands where it should
• Round profile that suits Raymor's round roses
• Brass arm, which holds a big stainless or ABS rose without drooping
• Arm only, letting you pick the head size and finish
• Black electroplated finish that matches the rest of the range
• Ceiling flange and installation instructions supplied
• 20 year warranty on the brass arm, 1 year on seals and labour

Ceiling mount, so allow for pipework in the ceiling space. Get your plumber to confirm the drop against your ceiling height before you buy.

Suits the Raymor Alpha, Raven and Lavas round roses. Shorter 200mm and 300mm round arms are available too.

Specifications

Construction material: Brass
Overall height: 456 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Cathedral ceiling putting the rose out of reach? The Raymor Ceiling Mount Straight Round Shower Arm 450mm in Chrome is the longest of the round ceiling arms, built for high ceilings where a short arm would leave the rose too far above your head. It's arm only, a straight round length of brass, so you choose the rose separately and match the size to the room. The ceiling flange and installation instructions are in the box. You get 20 years of warranty on the brass arm, with the finish covered for 20 years in Chrome and 5 years in Black, and 1 year on seals and labour. Also available in Black, and in 200mm and 300mm drops if the ceiling isn't that high.

• Long straight drop for tall ceilings, so the spray lands where it should
• Round profile that suits Raymor's round roses
• Brass arm, which holds a big stainless or ABS rose without drooping
• Arm only, letting you pick the head size and finish
• Chrome electroplated finish that matches the rest of the range
• Ceiling flange and installation instructions supplied
• 20 year warranty on the brass arm, 1 year on seals and labour

Ceiling mount, so allow for pipework in the ceiling space. Get your plumber to confirm the drop against your ceiling height before you buy.

Suits the Raymor Alpha, Raven and Lavas round roses. Shorter 200mm and 300mm round arms are available too.

Specifications

Construction material: Brass
Overall height: 456 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Ceiling a bit higher than standard? The Raymor Ceiling Mount Straight Round Shower Arm 300mm in Black sits between the 200mm and 450mm arms, which makes it the pick for slightly raised ceilings or for taller people who want the rose a touch lower. It's a straight round brass arm, arm only, with an electroplated black finish that pairs with the Raven rose and black tapware. There's no head included, so you buy the rose separately and match the size to your space. The flange and installation instructions come in the box. Warranty is 20 years on the brass arm, 5 years on the black finish and 1 year on seals and labour.

• 300mm drop for ceilings a little above standard, or for bringing the rose closer
• Round profile to suit round roses such as the Raven
• Brass arm that stays straight under a heavy head
• Electroplated black finish that matches Raymor black tapware and roses
• Arm and ceiling flange with installation instructions in the box
• 20 year warranty on the brass arm, 5 years on the finish, 1 year on seals and labour

Ceiling mounted. Your plumber needs to get to the pipework above, so check the ceiling space first.

Pair it with the Raymor Raven Round Shower Rose, and look at the 200mm or 450mm round arms if the drop isn't right.

Specifications

Construction material: Brass
Overall height: 301 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Round rose need a round arm to match? The Raymor Ceiling Mount Straight Round Shower Arm 200mm in Black does one job: it holds your shower rose 200mm below the ceiling on a straight, round brass arm. It's sold without a head, so you can fit a Raymor round rose in the size you want. The arm is brass all the way through, with a flange to cover the ceiling cut out and installation instructions in the pack. On a standard ceiling the 200mm drop keeps the rose clear of tall heads but still close enough for good spray. Warranty is 20 years on the brass arm, 20 years on the finish for Chrome and 5 years for Black, and 1 year on seals and labour. Also available in Chrome, plus 300mm and 450mm drops.

• 200mm drop that suits standard ceiling heights
• Round profile, so it matches round roses like the Alpha and Raven
• Brass arm, which won't flex under a heavy stainless rose
• Arm only, letting you choose the head separately
• Black electroplated finish that stays looking new
• Ceiling flange and installation instructions included
• 20 year warranty on the arm, 1 year on seals and labour

Ceiling mounted, so there's plumbing to run above the ceiling. Ask your plumber to check access before you order.

Team it with the Raymor Alpha, Raven or Lavas round roses, or pick the 300mm or 450mm round arm for a higher ceiling.

Specifications

Construction material: Brass
Overall height: 206 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Moving the shower head to the ceiling in a standard height room? The Raymor Ceiling Mount Straight Round Shower Arm 200mm in Chrome does one job: it holds your shower rose 200mm below the ceiling on a straight, round brass arm. It's sold without a head, so you can fit a Raymor round rose in the size you want. The arm is brass all the way through, with a flange to cover the ceiling cut out and installation instructions in the pack. On a standard ceiling the 200mm drop keeps the rose clear of tall heads but still close enough for good spray. Warranty is 20 years on the brass arm, 20 years on the finish for Chrome and 5 years for Black, and 1 year on seals and labour. Also available in Black, plus 300mm and 450mm drops.

• 200mm drop that suits standard ceiling heights
• Round profile, so it matches round roses like the Alpha and Raven
• Brass arm, which won't flex under a heavy stainless rose
• Arm only, letting you choose the head separately
• Chrome electroplated finish that stays looking new
• Ceiling flange and installation instructions included
• 20 year warranty on the arm, 1 year on seals and labour

Ceiling mounted, so there's plumbing to run above the ceiling. Ask your plumber to check access before you order.

Team it with the Raymor Alpha, Raven or Lavas round roses, or pick the 300mm or 450mm round arm for a higher ceiling.

Specifications

Construction material: Brass
Overall height: 206 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Need a longer drop for a rain head in a tall bathroom? The Raymor Ceiling Mount Straight Square Shower Arm 450mm in Black is a plain straight arm with a 450mm drop, made for tall ceilings or anyone who wants the rose closer to head height. No head included, so you can match it with whichever square Raymor rose you like. It's made from brass and finished to match Raymor square tapware, and the pack includes the ceiling flange and installation instructions. Chrome comes with a 20 year finish warranty and Black with 5 years, on top of the 20 year cover for the brass arm and a year on seals and labour. Also available in Chrome, or in a 200mm drop for a lower ceiling.

• 450mm straight drop, so the rose isn't lost up on a high ceiling
• Arm only, which lets you choose the rose size and shape
• Brass construction that holds a big rose steady without drooping
• Square profile to suit square roses and matching tapware
• Black electroplated finish that matches the rest of the Raymor range
• Ceiling flange and installation instructions supplied
• 20 year warranty on the brass arm and 1 year on seals and labour

Ceiling mount, so your plumber will need access to the ceiling space. Measure from ceiling to the top of your head and allow for the rose before you commit.

Suits the Raymor Edge II and Sigma square roses. There's a 200mm version if your ceiling's standard height.

Specifications

Construction material: Brass
Overall height: 456 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

High ceiling leaving the rose too far above your head? The Raymor Ceiling Mount Straight Square Shower Arm 450mm in Chrome is a plain straight arm with a 450mm drop, made for tall ceilings or anyone who wants the rose closer to head height. No head included, so you can match it with whichever square Raymor rose you like. It's made from brass and finished to match Raymor square tapware, and the pack includes the ceiling flange and installation instructions. Chrome comes with a 20 year finish warranty and Black with 5 years, on top of the 20 year cover for the brass arm and a year on seals and labour. Also available in Black, or in a 200mm drop for a lower ceiling.

• 450mm straight drop, so the rose isn't lost up on a high ceiling
• Arm only, which lets you choose the rose size and shape
• Brass construction that holds a big rose steady without drooping
• Square profile to suit square roses and matching tapware
• Chrome electroplated finish that matches the rest of the Raymor range
• Ceiling flange and installation instructions supplied
• 20 year warranty on the brass arm and 1 year on seals and labour

Ceiling mount, so your plumber will need access to the ceiling space. Measure from ceiling to the top of your head and allow for the rose before you commit.

Suits the Raymor Edge II and Sigma square roses. There's a 200mm version if your ceiling's standard height.

Specifications

Construction material: Brass
Overall height: 456 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Ceiling arm chipped or the wrong colour for the new fittings? The Raymor Shower Arm Ceiling Mount Straight Square Rail 300mm in Black hangs straight down from a ceiling outlet, giving you 300mm of drop to hang an overhead rose. Rose not included, so match it with any Raymor square head. The rail and flange are both square, which suits squared bathrooms and the Edge II range. It's brass, with a 1/2 inch BSP female thread at the ceiling and a 1/2 inch BSP male thread for the rose, so it fits a standard outlet. Backed by a 20 year warranty on the brass arm, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Brushed Nickel and Chrome.

• Straight ceiling arm with a 300mm reach for an overhead rose
• Square rail and square flange for a tidy look against the ceiling
• Arm only, sold without a rose, so you pick the head
• Brass construction that holds a heavy rose without drooping
• 1/2 inch BSP female inlet and male outlet for a standard connection
• Black finish that matches Raymor roses in the same colour
• 20 year warranty on the brass arm

Needs a ceiling outlet, so talk to your plumber if you're moving the shower from the wall. Allow for ceiling height, as the rose hangs 300mm down plus its own depth.

Pair it with the Edge II 220mm shower rose or any Raymor square rose in the same finish.

Specifications

Construction material: Brass
Overall height: 306 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Need a square drop arm for a rain shower? The Raymor Shower Arm Ceiling Mount Straight Square Rail 300mm in Chrome hangs straight down from a ceiling outlet, giving you 300mm of drop to hang an overhead rose. Rose not included, so match it with any Raymor square head. The rail and flange are both square, which suits squared bathrooms and the Edge II range. It's brass, with a 1/2 inch BSP female thread at the ceiling and a 1/2 inch BSP male thread for the rose, so it fits a standard outlet. Backed by a 20 year warranty on the brass arm, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Brushed Nickel and Black.

• Straight ceiling arm with a 300mm reach for an overhead rose
• Square rail and square flange for a tidy look against the ceiling
• Arm only, sold without a rose, so you pick the head
• Brass construction that holds a heavy rose without drooping
• 1/2 inch BSP female inlet and male outlet for a standard connection
• Chrome finish that matches Raymor roses in the same colour
• 20 year warranty on the brass arm

Needs a ceiling outlet, so talk to your plumber if you're moving the shower from the wall. Allow for ceiling height, as the rose hangs 300mm down plus its own depth.

Pair it with the Edge II 220mm shower rose or any Raymor square rose in the same finish.

Specifications

Construction material: Brass
Overall height: 306 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Ceiling arm rusted or the wrong finish for the new rose? The Raymor Ceiling Mount Straight Square Shower Arm 200mm in Black is the arm only, no head. It drops 200mm straight down from the ceiling, so the rose sits high and clear on a normal height ceiling. The arm is solid brass with a square profile that lines up with square roses and tapware, and it comes with the ceiling flange and installation instructions in the box. Just add a matching Raymor shower rose, sold separately. Backed by a 20 year warranty on the brass arm, with the finish covered for 20 years in Chrome and 5 years in Black, plus 1 year on seals and labour. Also available in Chrome, and in a 450mm drop.

• Arm only, so you pick the rose to suit
• Ceiling mount with a 200mm drop, which keeps the head high on standard ceilings
• Solid brass, so it won't sag or corrode behind the flange
• Straight square profile that matches square roses and mixers
• Black electroplated finish that wipes clean
• Flange and installation instructions in the box
• 20 year warranty on the brass arm, 1 year on seals and labour

Ceiling mounted, so your plumber needs access above the ceiling to bring the pipework through. Check the drop suits your ceiling height before ordering.

Pair it with the Raymor Edge II or Sigma square shower roses, or go for the 450mm version if you've got a high ceiling.

Specifications

Overall height: 206 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

After a long straight arm that pushes the rose out over the shower? The Raymor Shower Arm Wall Right Angle Round in Black is a plain, straight round arm with a short bend at the end, which points your shower rose down over you rather than at the wall. It's the arm and wall flange only, no rose, so pick a Raymor shower rose to suit and buy it separately. Brass construction means it won't rust out the way an old steel arm can. Backed by a 20 year warranty on the brass arm, with 20 years on a chrome finish and 5 years on an electroplated finish, plus 1 year on seals and labour. Also available in Chrome.

• Straight round arm with a small downward bend at the tip, so the rose sits over your head
• Wall mounted with the flange included, which covers the old hole and finishes the job neatly
• Solid brass, so it won't rust out like older steel arms
• Black finish that wipes clean and matches Raymor roses in the same colour
• Arm only, so you can keep an existing rose or choose a new one
• Long reach that pushes the rose out into the shower rather than hugging the wall
• 20 year warranty on the brass arm, 5 years on electroplated finishes

Wall mounted onto a standard shower outlet. Ask your plumber to check the outlet height suits a longer arm.

Team it with a Raymor round shower rose, or see the curved and ceiling arms if you need a different reach.

Specifications

Construction material: Brass
Overall height: 434 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Want a shower arm with a bit more shape than a plain tube? The Raymor Rectangle Wall Curved Shower Arm in Black is the arm only, no rose, so you pair it with a Raymor shower rose sold separately. It mounts on the wall, with a rectangular body and a matching flange to cover the old hole. The gentle curve carries the rose forward over your head without a bulky elbow. It's made from brass in a two piece design, which makes lining it up on the wall easier for your plumber. Backed by a 20 year warranty on the brass arm, with 20 years on a chrome finish and 5 years on an electroplated finish, plus 1 year on seals and labour. Also available in Chrome.

• Arm and flange only, so you can pair it with whichever Raymor rose suits your bathroom
• Brass construction that holds up to years of hot water and steam
• Rectangular body and flange for a squared-off look that suits modern tiles
• Wall mounted with a curved profile that brings the rose out over you
• Two piece build, which makes it simpler for your plumber to fit and align
• Black finish that wipes clean, covered for 20 years on chrome and 5 years on electroplated colours
• Installation instructions in the box along with the flange

Wall mounted, and you'll need a Raymor shower rose to go with it. Ask your plumber to check the outlet position before you order.

Browse Raymor shower roses and the other wall and ceiling arms to build the shower you want.

Specifications

Construction material: Brass
Overall height: 255.3 mm
Overall width: 63.5 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Putting a new rose on but the old arm lets it down? The Raymor Shower Arm Wall Mount Curved Round Rail in Black is the arm only, no rose, so you can pair it with whichever Raymor shower rose suits you. It mounts to the wall and curves out to a 361mm reach, which gets the rose well clear of the tiles. The rail and flange are both round, so it sits well with round roses and rounded tapware. It's solid brass with a 1/2 inch BSP female inlet at the wall and a 1/2 inch BSP male outlet for the rose. Backed by a 20 year warranty on the brass arm, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Brushed Nickel and Chrome.

• Arm only, sold without a rose, so you choose the head that suits your taste and price point
• Wall mounted with a curved profile for a 361mm reach from the wall
• Round rail and round flange to match round roses and softer tapware lines
• Solid brass construction that won't rust out at the wall
• 1/2 inch BSP female inlet and 1/2 inch BSP male outlet, so a standard rose screws straight on
• Black electroplated finish that matches Raymor roses in the same colour
• 20 year warranty on the brass arm

Comes with the wall flange and installation instructions. Ask your plumber to check the wall outlet height before you buy.

Team it with a Raymor Alpha or Edge II shower rose in the same finish.

Specifications

Construction material: Brass
Arm reach: 361 mm
Inlet connection: 1/2"BSP Female
Overall height: 254 mm
Overall width: 64 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Wall arm too short for a big rose? The Raymor Wall Mount Right Angle Square Shower Arm in Black comes off the wall then turns straight up and out, giving a 340mm reach so a big rose sits over your head rather than against the wall. That means an overhead feel without opening the ceiling. It's arm only, solid brass with a square profile, and the wall flange and installation instructions are in the pack. Add a square Raymor rose, sold separately. The brass arm carries a 20 year warranty, the finish is covered for 20 years in Chrome and 5 years in Black, and seals and labour for 1 year. Also available in Chrome.

• Wall mounted, so there's no need to get into the ceiling
• 340mm reach that puts the rose out over you, not up against the tiles
• Right angle square design that matches square roses and tapware
• Solid brass arm, which holds a heavy rose steady
• Black electroplated finish that cleans up with a wipe
• Arm only, with wall flange and installation instructions included
• 20 year warranty on the brass arm, 1 year on seals and labour

Screws into the existing wall outlet, so it's usually a quick job for your plumber. Check the outlet height so the rose ends up above the tallest person in the house.

Pair it with the Raymor Edge II or Sigma square roses in the same finish.

Specifications

Construction material: Brass
Overall height: 361.5 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Overhead rose plumbed through the ceiling? The Raymor Shower Arm Ceiling Mount Straight Square Rail 300mm in Brushed Nickel hangs straight down from a ceiling outlet, giving you 300mm of drop to hang an overhead rose. Rose not included, so match it with any Raymor square head. The rail and flange are both square, which suits squared bathrooms and the Edge II range. It's brass, with a 1/2 inch BSP female thread at the ceiling and a 1/2 inch BSP male thread for the rose, so it fits a standard outlet. Backed by a 20 year warranty on the brass arm, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Chrome and Black.

• Straight ceiling arm with a 300mm reach for an overhead rose
• Square rail and square flange for a tidy look against the ceiling
• Arm only, sold without a rose, so you pick the head
• Brass construction that holds a heavy rose without drooping
• 1/2 inch BSP female inlet and male outlet for a standard connection
• Brushed nickel finish that matches Raymor roses in the same colour
• 20 year warranty on the brass arm

Needs a ceiling outlet, so talk to your plumber if you're moving the shower from the wall. Allow for ceiling height, as the rose hangs 300mm down plus its own depth.

Pair it with the Edge II 220mm shower rose or any Raymor square rose in the same finish.

Specifications

Construction material: Brass
Inlet connection: 1/2"BSP
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Straight arm, square look, no rose attached? The Raymor Shower Arm Wall Mount Right Angle Square Rail in Brushed Nickel is a plain right angle arm with a square profile, for a shower rose you buy separately. It comes off the wall square and holds the rose flat, which most people prefer for a straight down spray. The flange is square to match, covering the outlet neatly. The arm is brass with a 1/2 inch BSP female inlet at the wall and a 1/2 inch BSP male outlet for the rose. Backed by a 20 year warranty on the brass arm and 5 years on the brushed nickel electroplated finish, with 1 year on seals and labour.

• Right angle wall arm that holds the rose level for a direct spray
• Square rail and square flange, so it suits the Edge II rose and other square heads
• Rose not included, letting you choose the size and style you want
• Brass throughout for a fitting that lasts
• Standard 1/2 inch BSP female inlet and male outlet
• Brushed nickel electroplated finish to match Raymor square roses and tapware
• 20 year warranty on the brass arm, 5 years on the finish

Wall mounted with the flange in the box. Because it sits horizontal, check the outlet height gives clearance for the rose, or ask your plumber.

Team it with the Edge II 220mm rose and Edge II hand shower in Brushed Nickel.

Specifications

Construction material: Brass
Inlet connection: 1/2"BSP
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Square rose needs a square arm to look right? The Raymor Shower Arm Wall Mount Curved Square Rail in Brushed Nickel is a wall mounted arm with a gentle curve that carries the rose forward and away from the tiles. Square rail, square flange, so it lines up with square roses and squared tapware like the Edge II range. It's the arm only, rose sold separately, which means you can pick the head size you want. Made from brass with a 1/2 inch BSP female inlet at the wall and a 1/2 inch BSP male outlet for the rose. Backed by a 20 year warranty on the brass arm and 5 years on the brushed nickel electroplated finish, with 1 year on seals and labour.

• Curved wall arm that brings the rose out from the wall for a better standing position
• Square rail and square flange to suit square roses
• Arm only, so you choose the Raymor rose that suits
• Brass construction for a long life in a wet room
• 1/2 inch BSP female inlet and male outlet, standard fittings your plumber will know
• Brushed nickel electroplated finish that matches the Edge II rose and hand shower
• 20 year warranty on the brass arm, 5 years on the finish

Wall mounted, supplied with the flange and installation instructions. Ask your plumber if the existing outlet is at a sensible height for a curved arm.

Add the Edge II 220mm shower rose in Brushed Nickel to complete the set.

Specifications

Construction material: Brass
Inlet connection: 1/2"BSP
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Adding a hand piece to the bath without calling a tiler? The Raymor Edge II Hand Shower in Brushed Nickel bundles a hand piece, 1.5m PVC hose and a combined inlet elbow and cradle in one kit. Because the elbow screws straight onto the outlet, there's no drilling into tiles, and the compact side cradle keeps everything tucked close to the wall. Tilt the cradle anywhere across 180 degrees and the spray lands where you need it. Three spray patterns change at the press of a button on the ABS hand piece. WELS 3 star rated at 9 litres a minute. Backed by a 20 year warranty on the wall elbow, hose and handpiece, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Chrome and Black.

• Drill free screw on fitting, which makes it a straight replacement for an old hand shower
• Inlet elbow and cradle in one piece, so there's only one fitting on the wall
• 180 degree tilt on the cradle to point the spray at kids, pets or the glass
• Push button ABS hand piece with three spray settings on a 1.5m PVC hose
• Compact side cradle that keeps the hand piece close to the wall
• Brushed nickel finish to match Edge II tapware, showers and accessories
• WELS 3 star at 9 litres a minute for a full spray without the waste

Fits a standard wall or bath outlet. Check the outlet is sound before you screw it on, or ask your plumber.

Edge II also does basin mixers, shower roses and accessories in the same finish.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18334
Construction material: Brass and zinc inlet and cradle. PVC hose. ABS hand shower
Hose length: 1.5m
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• 1 x Hand shower
• 1 x Inlet elbow and cradle
• 1 x 1.5m hose
• Installation instructions

Ensuite missing a hand shower for cleaning the screen? The Raymor Edge II Hand Shower in Black bundles a hand piece, 1.5m PVC hose and a combined inlet elbow and cradle in one kit. Because the elbow screws straight onto the outlet, there's no drilling into tiles, and the compact side cradle keeps everything tucked close to the wall. Tilt the cradle anywhere across 180 degrees and the spray lands where you need it. Three spray patterns change at the press of a button on the ABS hand piece. WELS 3 star rated at 9 litres a minute. Backed by a 20 year warranty on the wall elbow, hose and handpiece, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Chrome and Brushed Nickel.

• Drill free screw on fitting, which makes it a straight replacement for an old hand shower
• Inlet elbow and cradle in one piece, so there's only one fitting on the wall
• 180 degree tilt on the cradle to point the spray at kids, pets or the glass
• Push button ABS hand piece with three spray settings on a 1.5m PVC hose
• Compact side cradle that keeps the hand piece close to the wall
• Black finish to match Edge II tapware, showers and accessories
• WELS 3 star at 9 litres a minute for a full spray without the waste

Fits a standard wall or bath outlet. Check the outlet is sound before you screw it on, or ask your plumber.

Edge II also does basin mixers, shower roses and accessories in the same finish.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18334
Construction material: Brass and zinc inlet and cradle. PVC hose. ABS hand shower
Hose length: 1.5m
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• 1 x Hand shower
• 1 x Inlet elbow and cradle
• 1 x 1.5m hose
• Installation instructions

Rose coming out of the ceiling and the old drop arm looking shabby? The Raymor Shower Arm Ceiling Mount Straight Round Flange & Rail 300mm in Brushed Nickel drops straight down from a ceiling outlet to hold your rose overhead. It's the arm only, so add whichever Raymor rose you fancy. The 300mm drop keeps the rose out of the ceiling line and puts it above head height in most bathrooms. Round rail, round flange, all brass, with a 1/2 inch BSP female thread into the ceiling and a 1/2 inch BSP male thread for the rose. Backed by a 20 year warranty on the brass arm and 5 years on the brushed nickel electroplated finish, with 1 year on seals and labour.

• Ceiling mounted straight drop arm, 300mm long, for an overhead rose
• Arm only, no rose, so you match it to the Raymor rose you want
• Round rail and round flange that sit neatly against the ceiling
• Brass construction that won't sag or corrode
• 1/2 inch BSP female inlet and male outlet for a standard connection
• Brushed nickel electroplated finish to match roses and tapware in the same colour
• 20 year warranty on the brass arm, 5 years on the finish

Needs a ceiling shower outlet already in place, or your plumber to run one. Check ceiling height first, as the rose will sit 300mm lower plus its own depth.

Pair it with the Alpha 225mm shower rose in Brushed Nickel for a round overhead set.

Specifications

Construction material: Brass
Inlet connection: 1/2"BSP
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Old right angle shower arm gone dull or leaking at the wall? The Raymor Shower Arm Wall Mount Right Angle Round Rail in Brushed Nickel is a straight, no fuss arm that comes off the wall at a right angle to hold your shower rose. The rose isn't included, so you can match it with any Raymor rose you like. Brass throughout, with a round rail and a round flange that covers the wall outlet neatly. The wall end is a 1/2 inch BSP female thread and the rose end is 1/2 inch BSP male. It's a simple job for your plumber, or a confident DIYer with thread tape. Backed by a 20 year warranty on the brass arm and 5 years on the brushed nickel electroplated finish, with 1 year on seals and labour.

• Right angle arm that holds the rose square to the wall for a straight down spray
• Sold without a rose, so it works with your existing head or a new Raymor one
• Round rail and flange for a clean look with round roses
• Brass body that stands up to steam and hard water
• 1/2 inch BSP female inlet and male outlet, so it screws onto a standard outlet
• Brushed nickel electroplated finish that matches Raymor roses and hand showers
• 20 year warranty on the brass arm, 5 years on the finish

Wall mounted, flange and installation instructions included. Check the wall outlet is at a height you're happy with, as the arm sits horizontal from it.

Finish it with a Raymor Alpha shower rose in Brushed Nickel, or add the Alpha hand shower alongside.

Specifications

Construction material: Brass
Inlet connection: 1/2"BSP
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Shower arm rusted through at the wall? The Raymor Shower Arm Wall Mount Curved Round Rail in Brushed Nickel is the arm only, no rose, so you can pair it with whichever Raymor shower rose suits you. It mounts to the wall and curves out to a 361mm reach, which gets the rose well clear of the tiles. The rail and flange are both round, so it sits well with round roses and rounded tapware. It's solid brass with a 1/2 inch BSP female inlet at the wall and a 1/2 inch BSP male outlet for the rose. Backed by a 20 year warranty on the brass arm, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Chrome and Black.

• Arm only, sold without a rose, so you choose the head that suits your taste and price point
• Wall mounted with a curved profile for a 361mm reach from the wall
• Round rail and round flange to match round roses and softer tapware lines
• Solid brass construction that won't rust out at the wall
• 1/2 inch BSP female inlet and 1/2 inch BSP male outlet, so a standard rose screws straight on
• Brushed nickel electroplated finish that matches Raymor roses in the same colour
• 20 year warranty on the brass arm

Comes with the wall flange and installation instructions. Ask your plumber to check the wall outlet height before you buy.

Team it with a Raymor Alpha or Edge II shower rose in the same finish.

Specifications

Construction material: Brass
Arm reach: 361 mm
Inlet connection: 1/2"BSP Female
Overall height: 254 mm
Overall width: 64 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions