Kitchen Sinks

Not sure yet whether the new bench will be laminate or stone? The Oliveri Endeavour Double Bowl Universal Sink can be fitted as a topmount or an undermount, so you can order the sink before the bench is decided. It's made in Adelaide, South Australia from 0.9mm thick 304 grade stainless steel with square corners, and gives you two full bowls with no drainer, which suits a kitchen with a dishwasher. One tap hole is punched for your mixer. Two 90mm basket wastes and adjustable clips are supplied. Oliveri covers it with a lifetime manufacturer's warranty (see Oliveri's terms), so it's a sensible pick for a renovation you only want to do once.

• Universal design that installs as a topmount or an undermount, so it suits either bench type
• Two full bowls with no drainer, which saves bench space where a dishwasher does the drying
• Australian made in Adelaide from 0.9mm 304 grade polished stainless steel
• Square corners that hold more and are easy to wipe out
• One tap hole for a standard sink mixer
• Two 90mm basket wastes and adjustable clips in the box
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 775 x 158 x 500mm and it needs an 800mm cabinet. Undermount fitting needs a stone or solid surface bench, so confirm with your stonemason and plumber first.

Oliveri's Endeavour colanders and drainer baskets give you somewhere to drain dishes without a drainer board.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 775 x 158 x 500 mm
Mounting: Universal (topmount or undermount)
Bowl configuration: Double Bowl
Tap holes: 1 tap hole only
Minimum cabinet size: 800mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fancy a black sink that's still stainless steel underneath? The Oliveri Spectra 1 & 1/2 Bowl Sink in Black is 1.2mm thick 304 grade 18/10 stainless steel with a coloured finish, so you get the look of a dark composite with the strength and easy care of steel. There's a full bowl for washing and a half bowl for rinsing or peelings, both with waste outlets set to the rear so you keep more cupboard space below. Sound proofing keeps it quiet. It's a universal sink, so it can go in as an inset, undermount or flushmount, and there's no tap hole, so your mixer mounts in the bench. Two basket wastes, clips, a drainer tray, a bamboo board and two matching bowl protectors are in the box. Lifetime manufacturer's warranty (see Oliveri's terms).

• Black coloured finish over 1.2mm thick 304 grade 18/10 stainless steel, so it's tough as well as dark
• Full bowl plus half bowl, which gives you a rinse or scrap bowl without a wide cut-out
• Rear waste outlets that leave more usable room in the cupboard underneath
• Sound proofing to take the ring out of the steel
• Universal design for inset, undermount or flushmount fitting with no tap hole
• Two matching bowl protectors, bamboo chopping board, drainer tray, two basket wastes and clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 790 x 210 x 445mm and it needs a 900mm cabinet. Undermount or flushmount fitting needs a stone or solid surface bench, so talk to your stonemason and plumber before ordering.

The Spectra Double Bowl Sink in Black is the same finish if you'd rather two full bowls.

Specifications

Construction material: 304 grade, 18/10 coloured stainless steel
Finish/coating: Black
Overall dimensions (W x D x H): 790 x 210 x 445 mm
Mounting: Topmount
Bowl configuration: 1 & 1/2 Bowl
Minimum cabinet size: 900mm
Overflow: Safeguard
Country of origin: China
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

After a double bowl that looks sharper than the usual pressed sink? The Oliveri Sonetto Double Bowl Topmount Sink in Brushed Stainless Steel is formed from 1.2mm thick 304 grade 18/10 stainless steel, with softly squared corners that are easy to wipe out. Sound proofing pads on the underside take the clatter out of running water and dropped cutlery. It's a topmount with one tap hole, so it suits most benches and a standard sink mixer. You get more than the sink in the box: two 90mm basket wastes, mounting clips, a bench top drainer tray and a bamboo chopping board. Oliveri is Australian owned and backs it with a lifetime manufacturer's warranty (see Oliveri's terms).

• 1.2mm thick 304 grade 18/10 stainless steel, heavier than most topmount sinks, so it feels solid and resists dents
• Brushed finish that hides fine scratches and fingerprints better than a mirror polish
• Softly squared corners that give you room in the bowl but still wipe clean easily
• Sound proofing underneath, which quietens the sink and helps keep washing up water warm
• Topmount with one tap hole, so it fits laminate, timber or stone benches
• Bamboo chopping board and bench top drainer tray included, with two 90mm basket wastes and clips
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 785 x 211 x 510mm with a 769 x 494mm cut-out and 10mm corners, so you need an 800mm cabinet. There's no overflow on this model, so get your plumber to connect the wastes and mixer.

Oliveri makes custom colanders and drainer baskets for the Sonetto bowls if you want more prep space.

Specifications

Construction material: 304 grade, 18/10 brushed stainless steel
Finish/coating: Brushed Stainless Steel
Overall dimensions (W x D x H): 785 x 211 x 510 mm
Mounting: Topmount
Bowl configuration: Double Bowl
Tap holes: 1 tap hole only
Cut out size: 769 x 494 x 10mm radius
Minimum cabinet size: 800mm
Overflow: Not available
Country of origin: China
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Swapping out a tired 1 & 3/4 bowl sink in a rental or first home? The Oliveri Endeavour 1 & 3/4 Bowl Sink With Drainer Right Hand Drainer is the straightforward choice. The drainer sits on the right, with a full bowl and a three quarter bowl to the left. It's made in Adelaide, South Australia from 0.9mm thick 304 grade stainless steel, with square corners and an embossed drainer that sends water back into the bowl. It's a topmount sink with one tap hole punched for your mixer. Two 90mm basket wastes and adjustable clips come in the box. Oliveri backs it with a lifetime manufacturer's warranty (see Oliveri's terms), which is rare at this price.

• Right hand drainer with the bowls on the left, so check it suits your bench before ordering
• Full bowl and three quarter bowl, which lets you soak and rinse at the same time
• Australian made in Adelaide from 0.9mm 304 grade polished stainless steel
• Embossed drainer that drains back into the bowl instead of pooling
• Topmount with one tap hole for a standard sink mixer
• Two 90mm basket wastes and adjustable clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 1080 x 164 x 480mm with a 1060 x 460mm cut-out and 15mm corners, and it needs a 700mm cabinet under the bowls. Ask your plumber to connect the wastes and mixer.

Oliveri's colanders and chopping boards for the Endeavour range turn the main bowl into a prep area.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1080 x 164 x 480 mm
Mounting: Topmount
Bowl configuration: 1 & 3/4 Bowl
Drainer: Right Hand Drainer
Tap holes: 1 tap hole
Cut out size: 1060 x 460 x 15mm radius
Minimum cabinet size: 700mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Small kitchen, bold finish? The Oliveri Spectra Single Bowl Sink in Brushed Gold fits a 600mm cabinet and gives you one 540mm bowl in a brushed gold coloured finish over 1.2mm thick 304 grade 18/10 stainless steel. It pairs with gold or brass tapware and cleans like any steel sink. The waste outlet sits to the rear so the cupboard underneath stays useful, and sound proofing keeps it quiet. It's a universal sink that fits as an undermount, inset or flushmount, with no tap hole, so your mixer goes through the bench. The box includes a basket waste, clips, a bench top drainer tray, a bamboo board and a matching bowl protector. Lifetime manufacturer's warranty (see Oliveri's terms).

• Brushed gold coloured finish over 1.2mm 304 grade 18/10 stainless steel, so it's hard wearing as well as striking
• 540mm single bowl that suits a 600mm cabinet, island or butler's pantry
• Rear waste outlet for more room in the cupboard below
• Sound proofing that cuts the noise of running water
• Universal design for undermount, inset or flushmount fitting with no tap hole
• Matching bowl protector, bamboo chopping board, drainer tray, basket waste and clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 540 x 210 x 445mm. Undermount or flushmount fitting needs a stone or solid surface bench; ask your stonemason and plumber. No overflow is fitted.

The Spectra 1 & 1/2 Bowl Sink in Brushed Gold is the matching step up for the main kitchen.

Specifications

Construction material: 304 grade, 18/10 coloured stainless steel
Finish/coating: Brushed Gold
Overall dimensions (W x D x H): 540 x 210 x 445 mm
Mounting: Undermount
Bowl configuration: Single Bowl
Minimum cabinet size: 600mm
Overflow: Not available
Country of origin: China
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a single bowl for a 500mm cabinet that still takes a decent pot? The Oliveri Nu-Petite Standard Bowl Topmount Sink is 460mm wide with one deep bowl and a rear waste outlet, so the cupboard underneath isn't full of plumbing. It's made in Adelaide, South Australia from 0.9mm thick 304 grade stainless steel. The sink sits into the bench as a topmount with one tap hole punched for your mixer, so it suits any bench material. Basket wastes, adjustable clips, sealing foam, a bamboo chopping board and a colander come in the box, which makes a small sink work harder. Oliveri covers it with a lifetime manufacturer's warranty (see Oliveri's terms).

• 460mm wide single bowl that fits a 500mm cabinet
• Rear waste outlet for more usable space in the cupboard below
• Australian made in Adelaide from 0.9mm 304 grade polished stainless steel
• Topmount with one tap hole for a standard sink mixer
• Bamboo chopping board and colander included, so you can chop and drain over the bowl
• Basket wastes, adjustable clips and sealing foam in the box
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 460 x 212 x 500mm with a 440 x 480mm cut-out and 15mm corners. Your plumber connects the waste and mixer once it's clipped in.

Step up to the Nu-Petite Double Bowl Topmount Sink if you have a 900mm cabinet to fill.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 460 x 212 x 500 mm
Mounting: Topmount
Bowl configuration: Single Bowl
Tap holes: 1 tap hole only
Cut out size: 440 x 480 x 15mm radius
Minimum cabinet size: 500mm
Overflow: Special order option
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Double bowl plus drainer, without spending big? The Oliveri Endeavour Double Bowl Sink With Drainer Right Hand Drainer has the drainer on the right and both bowls on the left, so measure your bench with that in mind. It's made in Adelaide, South Australia from 0.9mm thick 304 grade stainless steel, with square corners and an embossed drainer that channels water back where it belongs. It's a topmount sink with one tap hole for your mixer, which keeps the install simple. In the box are two 90mm basket wastes and adjustable clips. Oliveri backs it with a lifetime manufacturer's warranty (see Oliveri's terms), so it's built to be fitted once.

• Right hand drainer with two full bowls on the left, so one can soak while you wash in the other
• Australian made in Adelaide from 0.9mm 304 grade polished stainless steel
• Square cornered bowls that fit trays and pots flat
• Embossed drainer with ridges that run water back into the bowl
• Topmount installation with one tap hole, which suits most benches and mixers
• Two 90mm basket wastes and adjustable clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 1135 x 164 x 480mm with a 1115 x 460mm cut-out and 15mm corners, and it needs an 800mm cabinet under the bowls. Your plumber connects the wastes and the mixer.

Oliveri's Endeavour chopping boards and bowl protectors are made to fit these bowls.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1135 x 164 x 480 mm
Mounting: Topmount
Bowl configuration: Double Bowl
Drainer: Right Hand Drainer
Tap holes: 1 tap hole
Cut out size: 1115 x 460 x 15mm radius
Minimum cabinet size: 800mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Gold tapware already picked and want the sink to match? The Oliveri Spectra 1 & 1/2 Bowl Sink in Brushed Gold is 1.2mm thick 304 grade 18/10 stainless steel with a brushed gold coloured finish, so it carries the look without giving up the strength of steel. A full bowl handles the washing and a half bowl takes rinsing or scraps, both with rear waste outlets to keep the cupboard below clear. Sound proofing keeps it quiet. It's a universal sink for undermount, inset or flushmount fitting, and there's no tap hole, so your mixer mounts in the bench. Two basket wastes, clips, a drainer tray, a bamboo board and two matching bowl protectors come in the box. Lifetime manufacturer's warranty (see Oliveri's terms).

• Brushed gold coloured finish over 1.2mm 304 grade 18/10 stainless steel, which hides fingerprints better than polished
• Full bowl plus half bowl, so you get a rinse bowl without a wide cut-out
• Rear waste outlets that leave more storage in the cupboard
• Sound proofing to take the ring out of the steel
• Universal design for undermount, inset or flushmount fitting with no tap hole
• Two matching bowl protectors, bamboo chopping board, drainer tray, two basket wastes and clips included
• Lifetime manufacturer's warranty (see Oliveri's terms)

Overall size is 790 x 210 x 445mm and it needs a 900mm cabinet. Undermount or flushmount fitting needs a stone or solid surface bench, so talk to your stonemason and plumber first.

The Spectra Single Bowl Sink in Brushed Gold is the smaller match for a butler's pantry or bar.

Specifications

Construction material: 304 grade, 18/10 coloured stainless steel
Finish/coating: Brushed Gold
Overall dimensions (W x D x H): 790 x 210 x 445 mm
Mounting: Undermount
Bowl configuration: 1 & 1/2 Bowl
Minimum cabinet size: 900mm
Overflow: Safeguard
Country of origin: China
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a serious main bowl under your stone bench without giving up a second one? The Oliveri Nu-Petite Double Bowl Undermount Sink pairs a generous main bowl with a smaller side bowl in 890mm, with rounded drainer flutes and rear waste outlets so you keep more cupboard room below. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. It's an undermount with no tap hole, so the mixer mounts through the bench. In the box you get two 90mm basket wastes, adjustable clips, sealing foam, a bamboo chopping board and a colander. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Generous main bowl plus a side bowl, so soaking and rinsing happen at once
• Rear waste outlets that free up space in the cupboard underneath
• Rounded drainer flutes which help reduce surface scratching
• 18/10 polished 304 grade stainless steel at 0.9mm thick for durability
• Undermount with no tap hole, for a clean edge under stone or solid surface benches
• Bamboo chopping board and colander included for prep over the bowls
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 900 x 720mm minimum cabinet and a stone or solid surface bench. Your stonemason cuts the opening and your plumber connects both wastes.

Add the Oliveri Nu-Petite Main Bowl Drainer Basket for rinsing and drying in the main bowl.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 890 x 216 x 516 mm
Tap holes: n/a
Minimum cabinet size: 900 x 720mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Is the bench run to the left of your sink? The Oliveri Diaz Single Bowl Topmount Sink with Left Hand Drainer puts the drainer there, so wet dishes drip over the sink and not the bench. One square cornered bowl and a drainer fit into 770mm and a 500mm cabinet. Oliveri makes it in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. It mounts from the top with one tap hole punched for a mixer. The box includes a basket waste, mounting clips, a colander, a bamboo chopping board and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Left hand drainer to suit a kitchen with the work surface on the left of the sink
• Single bowl in 770mm that fits a 500mm cabinet
• 18/10 polished 304 grade stainless steel at 0.9mm thick that resists dents and stains
• One tap hole punched, ready for your mixer
• Colander and bamboo chopping board in the box for prep over the bowl
• Basket waste, mounting clips and sealing foam included
• Australian made in Adelaide and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 750 x 460mm cut-out with 15mm radius corners. Ask your plumber to connect the waste.

The Oliveri Diaz Single Bowl Sink with Right Hand Drainer is the mirror version if your layout changes.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 192 x 480 mm
Tap holes: Available 0 or 1 tap hole (specify when ordering)
Cut out size: 750 x 460 x 15mm radius
Minimum cabinet size: 500mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Going with a stone benchtop? The Oliveri Diaz Double Bowl Undermount Sink fixes underneath it, so you can sweep crumbs straight into the bowls with no rim in the way. Two equal, square cornered bowls span 770mm. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. Being an undermount there's no tap hole in the sink; your mixer mounts through the bench behind it. In the box you get two basket wastes, mounting clips, a colander, a bamboo chopping board, a utility tray and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Undermount fit for stone or solid surface benches, which leaves a clean wipe down edge
• Two equal bowls across 770mm for washing and rinsing side by side
• 18/10 polished 304 grade stainless steel at 0.9mm thick for years of hard use
• No tap hole in the sink, so the mixer position is up to you and your stonemason
• Colander, bamboo chopping board and utility tray included for prep over the bowls
• Two basket wastes, mounting clips and sealing foam supplied
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs an 800mm cabinet and a stone or solid surface bench. Your stonemason cuts the opening and your plumber connects both wastes.

The Oliveri Diaz and Petite Main Bowl Colander is a handy spare if the included one is always in use.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 192 x 480 mm
Minimum cabinet size: 800mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing the big family sink in a 700mm cabinet? The Oliveri Endeavour 1 and 3/4 Bowl Topmount Sink with Left Hand Drainer is the 1080mm layout found in plenty of Australian kitchens, with a main bowl, a three quarter bowl and an embossed drainer on the left. Square corners suit older homes and new builds alike. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. Topmount fit with one tap hole punched for a mixer. In the box you get the sink, two 90mm basket wastes and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Main bowl plus a three quarter bowl, so two people can wash and rinse at once
• Embossed drainer on the left hand side that channels water back to the bowl
• 18/10 polished 304 grade stainless steel at 0.9mm thick for everyday toughness
• One tap hole punched, ready for a sink mixer
• Two 90mm basket wastes and adjustable clips supplied
• Made in Adelaide, South Australia, with a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 700mm cabinet and a 1060 x 460mm cut-out with 15mm radius corners. Your plumber connects both wastes.

The Oliveri Lakeland and Endeavour Main Bowl Bamboo Chopping Board sits over the main bowl for extra prep room.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1080 x 164 x 480 mm
Tap holes: 1 tap hole (for no tap hole order product code 'EE10')
Cut out size: 1060 x 460 x 15mm radius
Minimum cabinet size: 700mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Sink cabinet only 500mm wide? The Oliveri Endeavour Single Bowl Topmount Sink with Left Hand Drainer gives you a full square cornered bowl and an embossed drainer on the left in a 770mm footprint. It's a common size in units, older kitchens and rentals, so it often replaces the existing sink without touching the bench. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. Topmount fit with one tap hole punched for a mixer. Supplied with a 90mm basket waste and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Single bowl with a left hand drainer in 770mm, which fits a 500mm cabinet
• Embossed drainer that drains back to the bowl rather than onto the bench
• 18/10 polished 304 grade stainless steel at 0.9mm thick for a sink that lasts
• One tap hole punched for a mixer
• 90mm basket waste and adjustable clips in the box
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 750 x 460mm cut-out with 15mm radius corners. Check it against your existing hole before ordering and ask your plumber to connect the waste.

Pair it with the Oliveri Lakeland and Endeavour Main Bowl Bamboo Chopping Board for prep room over the bowl.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 164 x 480 mm
Tap holes: 1 tap hole (for no tap hole order product code 'EE20')
Cut out size: 750 x 460 x 15mm radius
Minimum cabinet size: 500mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Have a long run of bench to fill? The Oliveri Monet Double Bowl Topmount Sink with Double Drainer spans 1500mm, with two soft curved bowls in the middle and an embossed drainer on each side, so dishes drain one way while veg dries the other. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. The sink sits topmount in the bench and has one tap hole punched for a mixer. Oliveri includes two basket wastes, mounting clips, a colander, a bamboo chopping board and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Two bowls flanked by two embossed drainers across 1500mm, which suits a big family kitchen
• Soft curved bowl shape that's easy to wipe out
• 18/10 polished 304 grade stainless steel at 0.9mm thick for long term durability
• One tap hole punched for a sink mixer
• Colander and bamboo chopping board included for prep over the bowls
• Two basket wastes, mounting clips and sealing foam in the box
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs an 800mm cabinet beneath the bowls and a bench long enough for the 1500mm sink. Your plumber connects both wastes.

The Oliveri Monet Main Bowl Drainer Basket drops into the main bowl for rinsing and drying.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1500 x 195 x 500 mm
Tap holes: Available 1 tap hole only
Minimum cabinet size: 800mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Prefer two full bowls over a drainer? The Oliveri Endeavour Double Bowl Topmount Sink gives you a pair of square cornered bowls in 770mm, which suits an 800mm cabinet and leaves the bench free either side. It's a straightforward swap for most double bowl inset sinks of the same size. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick, so it shrugs off pots, pans and years of scrubbing. Sits topmount in the bench with one tap hole for a mixer. Supplied with two 90mm basket wastes and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Two full bowls in 770mm for washing and rinsing without a drainer taking up bench
• 18/10 polished 304 grade stainless steel at 0.9mm thick that handles heavy cookware
• One tap hole for a sink mixer
• Topmount fit that drops into a 750 x 460mm cut-out
• Two 90mm basket wastes and adjustable clips in the box
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs an 800mm cabinet and a 750 x 460mm cut-out with 15mm radius corners. Your plumber connects the two wastes.

Add the Oliveri Foldamate for 480mm sinks to dry dishes over a bowl and roll it away afterwards.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 161 x 480 mm
Cut out size: 750 x 460 x 15mm radius
Minimum cabinet size: 800mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a neat little bowl for a bar, a laundry bench or a prep station? The Oliveri Endeavour Standard Bowl Undermount Sink is a 350mm wide single bowl that fixes under a stone or solid surface bench and fits a 500mm cabinet. Square corners mean it holds more than a rounded bowl of the same size. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. No tap hole, as the mixer mounts through the bench. In the box: the sink, a 90mm basket waste and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• 350mm single bowl that fits a 500mm cabinet in a bar, pantry or laundry
• Undermount fit for stone or solid surface benches, so crumbs wipe straight in
• 18/10 polished 304 grade stainless steel at 0.9mm thick for years of use
• No tap hole, which lets you place the mixer to suit the bench
• 90mm basket waste and adjustable clips supplied
• Australian made in Adelaide and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 500mm cabinet and a stone or solid surface bench. Your stonemason cuts the opening and your plumber connects the waste.

The Oliveri Endeavour Large Bowl Undermount Sink is the bigger sibling if you want a main sink from the same range.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 350 x 154 x 405 mm
Tap holes: n/a
Minimum cabinet size: 500mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

One large bowl under a stone bench is all many kitchens need. The Oliveri Endeavour Large Bowl Undermount Sink is a 546mm wide single bowl with square corners, so a roasting dish or a stockpot sits flat and gets a proper soak. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. Fixed under a stone or solid surface bench, with no tap hole because your mixer mounts through the bench behind. Suits a 700mm cabinet. In the box: the sink, a 90mm basket waste and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• 546mm single bowl that takes oven trays and stockpots lying flat
• Undermount fit for stone or solid surface benches, so you wipe straight into the bowl
• 18/10 polished 304 grade stainless steel at 0.9mm thick for durability
• No tap hole, which leaves mixer placement to you
• 90mm basket waste and adjustable clips supplied
• Made in Adelaide, South Australia, with a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 700mm cabinet and a stone or solid surface bench. Your stonemason cuts the opening and your plumber connects the waste.

The Oliveri Lakeland and Endeavour Main Bowl Bamboo Chopping Board sits across the bowl for prep.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 546 x 190 x 426 mm
Tap holes: n/a
Minimum cabinet size: 700mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Got the room for two full bowls and a drainer? The Oliveri Endeavour Double Bowl Topmount Sink with Left Hand Drainer runs 1135mm wide, with two square cornered bowls and an embossed drainer on the left. It's the layout for a busy kitchen where one bowl soaks while the other washes. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. It fits topmount into an 800mm cabinet and has one tap hole punched for a mixer. In the box: the sink, two 90mm basket wastes and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Two full bowls plus a left hand drainer across 1135mm for a large kitchen
• Embossed drainer that sheds water back into the bowl
• 18/10 polished 304 grade stainless steel at 0.9mm thick for a long working life
• One tap hole punched for a sink mixer
• Two 90mm basket wastes and adjustable clips supplied
• Australian made in Adelaide and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs an 800mm cabinet and a 1115 x 460mm cut-out with 15mm radius corners. Your plumber connects both wastes.

Team it with the Oliveri Lakeland and Endeavour Main Bowl Bamboo Chopping Board for prep over a bowl.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1135 x 164 x 480 mm
Tap holes: 1 tap hole (for no tap hole order product code أ¢â‚¬ثœEE70')
Cut out size: 1115 x 460 x 15mm radius
Minimum cabinet size: 800mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Dishwasher sitting to the left of the sink cabinet? The Oliveri Diaz 1 and 3/4 Bowl Topmount Sink with Left Hand Drainer puts the drainer on the left so plates go from rinse to rack to dishwasher in one line. You get a main bowl and a three quarter second bowl, both square cornered, across 1080mm. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick, sits topmount in the bench and comes with one tap hole punched. In the box: two basket wastes, mounting clips, a colander, a bamboo chopping board and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Left hand drainer, which suits a kitchen with the dishwasher or bench run on the left
• Main bowl plus a three quarter bowl for two proper washing zones
• 18/10 polished 304 grade stainless steel at 0.9mm thick for a long service life
• One tap hole punched to take a mixer
• Included colander and bamboo chopping board that sit over the bowls
• Two basket wastes, mounting clips and sealing foam supplied
• Australian made in Adelaide and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Plan on a 700mm cabinet and a 1060 x 460mm cut-out with 15mm radius corners. Your plumber connects the two wastes.

Prefer the drainer on the right? The Oliveri Diaz 1 and 3/4 Bowl Sink with Right Hand Drainer is the mirror image.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1080 x 192 x 480 mm
Tap holes: Available 0 to 3 tap hole (specify when ordering)
Cut out size: 1060 x 460 x 15mm radius
Minimum cabinet size: 700mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Looking for a second sink for the butler's pantry or a bar? The Oliveri Diaz Standard Bowl Undermount Sink is a single square cornered bowl, 361mm wide, that fixes under a stone bench and fits a 500mm cabinet. It also works as the main sink in a studio or compact kitchen. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick, so it takes daily use without fuss. As an undermount there's no tap hole; the mixer goes through the bench. In the box: the sink, a basket waste, mounting clips and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Compact 361mm single bowl that suits a pantry, bar or small kitchen
• Undermount fit for stone or solid surface benches, so there's no rim to catch grime
• 18/10 polished 304 grade stainless steel at 0.9mm thick for durability
• No tap hole, which lets you place the mixer where it suits the bench
• Basket waste, mounting clips and sealing foam supplied
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 500mm cabinet and a stone or solid surface bench. Your stonemason cuts the opening and your plumber connects the waste.

Pair it with the Oliveri Diaz and Petite Main Bowl Bamboo Chopping Board to gain prep space over the bowl.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 361 x 182 x 431 mm
Tap holes: n/a
Minimum cabinet size: 500mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Small kitchen, one good bowl? The Oliveri Diaz Single Bowl Topmount Sink with Right Hand Drainer fits a 500mm cabinet and still gives you a full square cornered bowl with a drainer on the right. At 770mm wide it suits apartments, granny flats and galley kitchens. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. Topmount fit with one tap hole punched for a mixer. In the box: a basket waste, mounting clips, a colander, a bamboo chopping board and sealing foam, so prep and draining are sorted straight away. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Single bowl with a right hand drainer in a 770mm footprint for compact kitchens
• Fits a 500mm cabinet, which keeps cupboard space for everything else
• 18/10 polished 304 grade stainless steel at 0.9mm thick for a long life
• One tap hole punched for a sink mixer
• Colander and bamboo chopping board included to double the bowl as a prep station
• Basket waste, mounting clips and sealing foam supplied
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Cut the bench at 750 x 460mm with 15mm radius corners. Your plumber connects the single waste.

Want the drainer on the other side? The Oliveri Diaz Single Bowl Sink with Left Hand Drainer is the match.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 192 x 480 mm
Tap holes: Available 0 or 1 tap hole (specify when ordering)
Cut out size: 750 x 460 x 15mm radius
Minimum cabinet size: 500mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Would you rather two full bowls than a drainer you never use? The Oliveri Diaz Double Bowl Topmount Sink gives you a pair of equal, square cornered bowls across 770mm and no drainer, leaving more bench either side. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. The sink sits topmount in the bench with one tap hole punched for a mixer. Oliveri includes two basket wastes, mounting clips, a colander, a bamboo chopping board, a utility tray and sealing foam, so you have prep accessories from day one. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Two equal bowls for washing and rinsing, or soaking and prep, at the same time
• 770mm wide with no drainer, so you keep more clear bench
• 18/10 polished 304 grade stainless steel at 0.9mm thick that stands up to pots and pans
• One tap hole punched for a sink mixer
• Colander, bamboo chopping board and utility tray included to work over the bowls
• Two basket wastes, mounting clips and sealing foam in the box
• Made in Adelaide, South Australia, with a lifetime manufacturer's warranty (see Oliveri's terms)

Needs an 800mm cabinet and a 750 x 460mm cut-out with 15mm radius corners. Your plumber connects both wastes.

With no drainer, the Oliveri Foldamate for 480mm sinks gives you a drying rack that rolls away after.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 192 x 480 mm
Tap holes: Available 0 or 1 tap hole (specify when ordering)
Cut out size: 750 x 460 x 15mm radius
Minimum cabinet size: 800mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Cooking for a crowd and short on bench? The Oliveri Diaz 1 and 3/4 Bowl Topmount Sink with Right Hand Drainer gives you a full main bowl, a three quarter second bowl that's big enough for actual washing up, and a drainer on the right, across 1080mm. Square cornered bowls make the most of every millimetre. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick, fitted topmount with one tap hole punched. Oliveri packs in two basket wastes, mounting clips, a colander, a bamboo chopping board and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Main bowl and a three quarter bowl, so both sides take real washing up
• Right hand drainer with the bowls to the left as you stand at the sink
• 18/10 polished 304 grade stainless steel at 0.9mm thick that handles daily knocks
• One tap hole punched for a sink mixer
• Colander and bamboo chopping board in the box for prep over the bowls
• Two basket wastes, mounting clips and sealing foam supplied
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs a 700mm cabinet and a 1060 x 460mm cut-out with 15mm radius corners. Ask your plumber to connect both wastes.

Same layout, drainer on the other side? See the Oliveri Diaz 1 and 3/4 Bowl Sink with Left Hand Drainer.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1080 x 192 x 480 mm
Tap holes: Available 0 to 3 tap hole (specify when ordering)
Cut out size: 1060 x 460 x 15mm radius
Minimum cabinet size: 700mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Haven't settled on a stone bench or a laminate one yet? The Oliveri Diaz Double Bowl Universal Sink can go either way: fit it topmount into a laminate bench or undermount beneath stone, since the same sink suits both. You get two square cornered bowls of the same size, handy for washing on one side and rinsing on the other. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. One tap hole is punched for a mixer. In the box: the sink, two 90mm basket wastes and adjustable clips. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Universal design that installs topmount or undermount, so one sink suits either bench type
• Two matching bowls, which lets you wash and rinse side by side
• 18/10 polished 304 grade stainless steel at 0.9mm thick for a hard wearing finish
• One tap hole punched, ready for a sink mixer
• Two 90mm basket wastes and adjustable clips supplied
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Needs an 800mm cabinet. Undermounting suits a stone or solid surface bench; your stonemason cuts to suit and your plumber connects the wastes.

Add the Oliveri Diaz and Petite Main Bowl Colander or the matching bamboo chopping board to turn a bowl into prep space.

Specifications

Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 775 x 189 x 500 mm
Tap holes: Available 1 tap hole only
Minimum cabinet size: 800mm
Overflow: Special order option available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a main bowl, a small rinsing bowl and a drainer, all in under a metre? The Oliveri Diaz 1 and 1/2 Bowl Topmount Sink with Right Hand Drainer packs that into 980mm, with the drainer on the right as you face the sink. The square cornered bowls give you more usable floor space than a rounded bowl of the same width. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. It drops into the bench topmount, and one tap hole is punched for a mixer. The box includes two basket wastes, mounting clips, a colander, a bamboo chopping board and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).

• Main bowl plus half bowl, so you can rinse while the big bowl soaks a pan
• Right hand drainer that keeps dripping dishes off the bench
• 18/10 polished 304 grade stainless steel at 0.9mm thick for a sink that lasts
• One tap hole punched, ready for your mixer
• Colander and bamboo chopping board included, which turn the bowls into prep space
• Two basket wastes, mounting clips and sealing foam in the box
• Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)

Suits a 600mm cabinet with a 960 x 460mm cut-out and 15mm radius corners. Your plumber connects both wastes.

The Oliveri Foldamate for 480mm sinks rolls out over the bowl as an extra draining surface.

Specifications

Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 980 x 192 x 480 mm
Tap holes: Available 0 or 1 tap hole (specify when ordering)
Cut out size: 960 x 460 x 15mm radius
Minimum cabinet size: 600mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)

What's In The Box

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages