Vanities
Vanities
Shop All Vanities →Baths
Mirrors
Mirrors
Shop All Mirrors →Toilets
Basins
Accessories
Accessories
Shop All Accessories →Free metro shipping on every order over $100. Exclusions and Terms & Conditions apply.See delivery details →Heating
Heating
Shop All Heating →Kitchen & Laundry
-
TRADE LOGIN
*View accurate shipping rates and availability
Kitchen & Laundry
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Big bowl for the pots, small bowl for the rinsing. The Oliveri Monet 1 & 1/2 bowl undermount sink is a practical swap when your old kitchen sink has had its day, and a solid pick for a new benchtop. The full-size main bowl takes the roasting trays, while the smaller second bowl handles rinsing and draining. It's built from stainless steel at Oliveri's Adelaide factory, so it's tough and simple to keep clean. Overall it measures 670mm x 500mm x 195mm, with a main bowl of 350mm x 420mm and a secondary bowl of 215mm x 350mm. That shape has made the Monet range a long-standing favourite, and you can see why.
- Stainless steel construction for a hard-wearing sink that stands up to everyday use
- Overall dimensions of 670mm x 500mm x 195mm, so check your cabinet and cutout before ordering
- Main bowl sized 350mm x 420mm to handle larger cookware and roasting trays
- Secondary bowl sized 215mm x 350mm for rinsing, prep or stacking
- Available in right hand and left hand drainer to suit your bench layout
- Easy to maintain, wiping down quickly after cooking or cleaning up
Undermount sinks need a suitable benchtop and secure fixing, so have your plumber or benchtop installer confirm the cutout before you commit.
What's In The Box
1 x Sink
1 x Installation Instructions
1 x Topmount Clip Kit
2 x 90mm Basket waste
1 x Monet Main Bowl Colander
1 x Monet Main Bowl Bamboo Chopping Board
1 x Monet Main Bowl Utility Tray
Downloads
Download the specification sheet below:
Oliveri Monet 1 & 1/2 bowl undermount sink
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Soaking, hand-washing, rinsing out the mop bucket: a laundry tub earns its keep. The Clark Square 35L Laundry Sink is a practical drop-in tub for a laundry refresh or a new-build fit-out, and the 35L capacity handles the everyday mess a busy household throws at it. It's made from premium 304 grade stainless steel, so it stands up to daily use and keeps its finish over the long haul. A stainless steel basket waste comes in the box, and the concealed by-pass keeps the plumbing tidy and out of sight. Clean square lines, no fuss. It's built for overmount installation, dropping neatly into your benchtop, with a choice of 0 or 1 tap holes to suit how you'll run your tapware.
- Premium 304 grade stainless steel for durability and a lasting finish that holds up to regular use
- 35L capacity gives you plenty of room for soaking and hand-washing larger items
- Stainless steel basket waste included, so there's less to source separately
- Concealed by-pass keeps the underside neat and hides the plumbing from view
- Overmount installation drops the sink straight into your benchtop for a straightforward fit
- Choice of 0 or 1 tap holes, so you can match your existing or planned tapware setup
Decide on your tap hole option before ordering. Need a hand? Check with your plumber on how your tapware will be mounted.
What's In The Box
Downloads
Download the installation instructions below:
Warranty
Clark products are covered by warranties of up to a Lifetime*
Clark products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.
Baths
- Bath shell – 10 Years
- Labour, replacement product or parts – 1 Year
Basins
- Basins – 10 Year replacement product; 1 year parts and labour
- Wastes & Pop Up Plugs – 1 Year replacement product; 1 year parts and labour
Sinks & Tubs
- Sinks – Lifetime replacement product or parts; 1 year replacement product/parts & labour
- Tubs – Lifetime replacement product or parts; 1 year replacement product/parts & labour
- Cabinets – 5 Year replacement product or parts; 1 year labour
- Accessories & Spare parts – 1 Year replacement product or parts
Showers
- 10 year replacement product; 1 year parts, finishes & labour
Taps, Outlets & Mixers
- 10 year replacement product or parts; 1 year labour, finishes & ceramic disc spindles
Kitchen Accessories
- 1 Year replacement product or parts
Bathroom Accessories
- 5 years replacement product; 1 year finishes, wall fixing, mounting brackets & metal flex hoses
Should any warranty claim be made and attended to by a Clark authorised Service Agent and, in the opinion of the Service Agent or Clark, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or from some other cause other than a manufacturing defect of the goods for which Clark is responsible, Clark Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.
For After Sales & Service enquiries you can contact Clark directly on 13 14 16 for assistance. To view the Clark Warranty Document, click here.
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Old sink gone dull and stained? The Oliveri Ultraform single bowl topmount sink L/H drainer is a practical swap, and just as at home on a brand new benchtop. It sits on top of the bench, so installation is straightforward for your plumber. Stainless steel construction means it's tough enough for daily use and simple to keep clean. Overall dimensions are 890mm x 470mm x 171mm, with a generous bowl measuring 385mm x 330mm, so there's room for larger pots and pans. The left-hand drainer keeps washed-up dishes to one side, away from your prep space. Made at Oliveri's Adelaide factory, which says plenty about the quality.
- Stainless steel construction that stands up to years of daily use in a busy kitchen
- Bowl size of 385mm x 330mm, deep and wide enough for soaking trays and stacking dishes
- Overall dimensions of 890mm x 470mm x 171mm, ideal for checking against your benchtop cut-out
- Easy to wipe down and maintain, so it keeps looking tidy with minimal effort
- Available in 1 taphole, 3 tapholes, and 0 taphole to suit how you set up your mixer or tapware
Measure your benchtop cut-out before ordering, and confirm the taphole option matches your tapware or ask your plumber.
What's In The Box
1 x Sink
1 x Installation Instructions
1 x Adjustable Clip Kit
1 x Oliveri Basket Waste
Downloads
Download the specification sheet below:
Oliveri Ultraform single bowl topmount sink L/H drainer
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Fitting out a laundry with a 600mm cupboard to spare? The Oliveri Laundry 45L Tub is a topmount stainless tub that holds 45 litres, enough to soak a doona cover or hand wash a load of woollens without water slopping over the bench. It's pressed in Adelaide, South Australia, from 304 grade stainless steel at 0.9mm thick, formed as a single piece with soundproofing underneath to take the clang out of filling it. This is the no tap hole version, so your tap sits on the wall or in the bench behind. In the box you get the tub, a 90mm basket waste, adjustable clips and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).
- 45 litre single bowl that takes bulky washing and a long soak without crowding the bench
- 304 grade stainless steel at 0.9mm thick, so it stands up to hot water, detergents and years of use
- Pressed as one piece with soundproofing applied underneath to cut noise while filling
- No tap hole punched, which leaves you free to run a wall tap or a bench mounted mixer behind it
- 90mm basket waste, adjustable clips and sealing foam in the box for a tidy topmount fit
- Made in Adelaide, South Australia, with a lifetime manufacturer's warranty (see Oliveri's terms)
Needs a 600mm cabinet and a 570 x 450mm cut-out in the bench. This version comes without a bypass, so ask your plumber where the washing machine hose will drain.
If you want the machine to drain into the tub, look at the Oliveri Laundry 45L Tub with Rinse Bypass instead.
Specifications
Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 590 x 244 x 470 mm
Tap holes: Available 0 - 2 tap hole (specify positioning when ordering)
Cut out size: 570 x 450 mm
Minimum cabinet size: 600 mm
Overflow: And bypass options
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)
What's In The Box
- Sink
- 1 x 90 mm basket waste
- Adjustable clips
- Sealing foam
Downloads
Oliveri Laundry 45L tub topmount NTH Spec Sheet
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Laundry tub past its best? The Clark Square 45L Laundry Sink is a practical swap, and a solid pick if you're fitting out a new laundry from scratch. It's an overmount installation, so it drops into your benchtop for a neat finish. The 45L capacity leaves room for soaking, hand-washing and everything else the laundry throws at you. It's made from premium 304 grade stainless steel with a 0.6mm steel thickness, so it handles daily use without fuss. A concealed by-pass keeps the plumbing out of sight, and a stainless steel basket waste is included, which means one less thing on the shopping list. Clean square lines, and quality you can trust at a fair price.
- 45L capacity gives you plenty of room for soaking and hand-washing
- Made from premium 304 grade stainless steel for strength and rust resistance that lasts
- 0.6mm steel thickness gives the sink a solid, dependable feel
- Overmount installation drops neatly into your benchtop for a tidy fit
- Concealed by-pass keeps the pipework hidden for a cleaner look
- Stainless steel basket waste included, so it's ready to plumb in
- Available with 0 or 1 Tap Holes to match your setup
Choose your tap hole option to suit your mixer or wall tap layout, or check with your plumber before ordering.
What's In The Box
Downloads
Download the installation instructions below:
Warranty
Clark products are covered by warranties of up to a Lifetime*
Clark products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.
Baths
- Bath shell – 10 Years
- Labour, replacement product or parts – 1 Year
Basins
- Basins – 10 Year replacement product; 1 year parts and labour
- Wastes & Pop Up Plugs – 1 Year replacement product; 1 year parts and labour
Sinks & Tubs
- Sinks – Lifetime replacement product or parts; 1 year replacement product/parts & labour
- Tubs – Lifetime replacement product or parts; 1 year replacement product/parts & labour
- Cabinets – 5 Year replacement product or parts; 1 year labour
- Accessories & Spare parts – 1 Year replacement product or parts
Showers
- 10 year replacement product; 1 year parts, finishes & labour
Taps, Outlets & Mixers
- 10 year replacement product or parts; 1 year labour, finishes & ceramic disc spindles
Kitchen Accessories
- 1 Year replacement product or parts
Bathroom Accessories
- 5 years replacement product; 1 year finishes, wall fixing, mounting brackets & metal flex hoses
Should any warranty claim be made and attended to by a Clark authorised Service Agent and, in the opinion of the Service Agent or Clark, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or from some other cause other than a manufacturing defect of the goods for which Clark is responsible, Clark Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.
For After Sales & Service enquiries you can contact Clark directly on 13 14 16 for assistance. To view the Clark Warranty Document, click here.
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Have a long run of bench to fill? The Oliveri Monet Double Bowl Topmount Sink with Double Drainer spans 1500mm, with two soft curved bowls in the middle and an embossed drainer on each side, so dishes drain one way while veg dries the other. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. The sink sits topmount in the bench and has one tap hole punched for a mixer. Oliveri includes two basket wastes, mounting clips, a colander, a bamboo chopping board and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).
- Two bowls flanked by two embossed drainers across 1500mm, which suits a big family kitchen
- Soft curved bowl shape that's easy to wipe out
- 18/10 polished 304 grade stainless steel at 0.9mm thick for long term durability
- One tap hole punched for a sink mixer
- Colander and bamboo chopping board included for prep over the bowls
- Two basket wastes, mounting clips and sealing foam in the box
- Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)
Needs an 800mm cabinet beneath the bowls and a bench long enough for the 1500mm sink. Your plumber connects both wastes.
The Oliveri Monet Main Bowl Drainer Basket drops into the main bowl for rinsing and drying.
Specifications
Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1500 x 195 x 500 mm
Tap holes: Available 1 tap hole only
Minimum cabinet size: 800mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)
What's In The Box
- Sink
- 2 x basket waste
- Mounting clips
- Colander
- Bamboo chopping board
- Sealing foam
Downloads
Oliveri Monet double bowl topmount sink dbl drainer 1TH Spec Sheet
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Want a serious main bowl under your stone bench without giving up a second one? The Oliveri Nu-Petite Double Bowl Undermount Sink pairs a generous main bowl with a smaller side bowl in 890mm, with rounded drainer flutes and rear waste outlets so you keep more cupboard room below. Made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. It's an undermount with no tap hole, so the mixer mounts through the bench. In the box you get two 90mm basket wastes, adjustable clips, sealing foam, a bamboo chopping board and a colander. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).
- Generous main bowl plus a side bowl, so soaking and rinsing happen at once
- Rear waste outlets that free up space in the cupboard underneath
- Rounded drainer flutes which help reduce surface scratching
- 18/10 polished 304 grade stainless steel at 0.9mm thick for durability
- Undermount with no tap hole, for a clean edge under stone or solid surface benches
- Bamboo chopping board and colander included for prep over the bowls
- Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)
Needs a 900 x 720mm minimum cabinet and a stone or solid surface bench. Your stonemason cuts the opening and your plumber connects both wastes.
Add the Oliveri Nu-Petite Main Bowl Drainer Basket for rinsing and drying in the main bowl.
Specifications
Construction material: 304 Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 890 x 216 x 516 mm
Tap holes: n/a
Minimum cabinet size: 900 x 720mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)
What's In The Box
- Sink
- 2 x 90 mm basket waste adjustable clips
- Sealing foam
- Bamboo chopping board
- Colander
Downloads
Oliveri Nu-Petite double bowl undermount sink NTH Spec Sheet
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Want a sink mixer with a bit more reach? The Caroma Riviere Sink Mixer in Brushed Brass is a single lever mixer for your kitchen sink. It stands 378mm tall with 230mm to the spout and a 220mm reach, so there's room to fill a stockpot or rinse a baking tray. The spout swivels and can be set to turn through 70 or 140 degrees. A 35mm ceramic disc cartridge sits inside a lead free brass body. Out of the box it's WELS 5 star at 6.0 litres a minute, and a WELS 6 star aerator at 4.5 litres a minute is supplied if you'd like to save more water. Caroma backs it with a 20 year warranty.
- 378mm tall with 230mm to the spout, so big pots and jugs fit under easily
- 220mm reach that brings the water out towards the middle of the sink
- Swivel spout you can set to 70 or 140 degrees of rotation
- 35mm ceramic disc cartridge on a single lever for smooth control
- WELS 5 star at 6.0 litres a minute, with a WELS 6 star 4.5 litre aerator in the box
- Lead free brass body in a brushed brass finish
- 20 year warranty from Caroma
Needs 150 to 500kPa water pressure. Check there's clearance under any overhead cupboard for the 378mm height. If you'd rather a pull out spray, see the Caroma Riviere Pull Out Sink Mixer, or carry the look into the bathroom with the Riviere Basin Mixer.
Also available in Brushed Nickel, Brushed Bronze and Chrome.
Specifications
- WELS water efficiency: 5 star WELS rated
- WELS water consumption: 6.0L/min
- WELS registration number: T47373 & T47372
- Watermark certification: All Caroma Taps are Watermark Certified
- Construction material: Lead Free Brass
- Finish/coating: PVD
- Operating mechanism: 35mm ceramic disc cartridge
- Temperature rating: 1 - 75°C
- Operating pressure: 150 - 500kPa
- Overall height: 378mm
- Height to spout: 230mm
- Spout reach: 220mm
- Spout function: Swivel, 70deg-140deg rotation
- Warranty: 20 Years
What's In The Box
1 x Sink Mixer, fixing kit, installation instructions
Downloads
Download the installation instructions below:
Caroma Riviere Sink Mixer Brushed Brass Installation Instructions
Warranty
Caroma products are covered by warranties of up to a Lifetime*
Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.
Baths
- Bath shell – 20 Years
- Labour, replacement product or parts – 1 Year
Basins
- Basins – 20 year replacement product; 1 year parts & labour
- Basin Dress Rings – 5 year replacement product
Sinks & Tubs
- Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
- Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
- Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
- Accessories & Spare parts – 1 year replacement product or parts
Showers
- 20 years cover for replacement product or parts only*
- 1 year cover for labour
*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.
Taps, Outlets & Mixers
- 20 years cover for replacement product or parts only†
- 10 years cover for Tapware Engine* replacement parts only
- 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles
*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.
Finishes (Accessories, Showers, Taps, Outlets & Mixers)
- 20 years cover for PVD (Physical Vapour Deposition) product finish
- 20 years cover for Chrome product finish
- 10 years cover for all other product finishes
Toilets
- Toilet suites – 20 year replacement product*; 1 year parts & labour
- Toilet Seats – 1 year replacement product or parts
- Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
- Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)
*Excludes inlet and outlet valve washers – 1 year parts and labour only.
Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.
Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.
Wastes & Traps – 1 Year
Kitchen Accessories – 1 Year
Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.
For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.
Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Soaking, hand-washing, rinsing out the footy socks: the laundry tub earns its keep. The Caroma Urbane II 45 Litre Stainless Steel Laundry Tub is a straightforward pick when you're building a new laundry or replacing a worn-out tub. That 45L capacity gives you room to soak, hand-wash and rinse, so it handles the everyday jobs without fuss. It's made from premium 304 grade stainless steel, so it stands up to daily use and resists corrosion over the long haul. The clean rectangular shape measures 630mm x 480mm and carries the same modern look as the rest of the Urbane II range, which means your laundry can share a style with your kitchen. It arrives ready to install, with a single bypass kit and stainless steel basket waste included.
- Generous 45L tub capacity gives you plenty of depth for soaking and larger loads
- Premium 304 grade stainless steel resists rust and wear, so the tub lasts
- Compact 630mm x 480mm footprint fits neatly into most laundry setups
- Available in 0 or 1 taphole options, so you can match your existing tap arrangement
- Supplied with a single bypass kit and stainless steel basket waste, ready for your plumber to connect
- Simple rectangular design pairs cleanly with the rest of the Urbane II range
Choose the 0 or 1 taphole version to suit your tapware setup. Need a hand? Check with your plumber.
Team it with the matching Urbane II range to carry the look from your kitchen through to your laundry.
Specifications
Construction material: 304 Grade Stainless Steel
Overall length: 630mm
Overall width: 480mm
Overall depth: 226mm
Inner bowl dimensions: 580mm x 380mm x 226mm
Capacity: 45L
Plug & waste: Includes stainless steel basket waste
Installation: Inset (drop-in)
Warranty: 7 year replacement product/parts and labour
What's In The Box
Downloads
Download the installation instructions below:
Caroma Urbane II 45 Litre Stainless Steel Laundry Tub
Warranty
Caroma products are covered by warranties of up to a Lifetime*
Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.
Baths
- Bath shell – 20 Years
- Labour, replacement product or parts – 1 Year
Basins
- Basins – 20 year replacement product; 1 year parts & labour
- Basin Dress Rings – 5 year replacement product
Sinks & Tubs
- Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
- Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
- Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
- Accessories & Spare parts – 1 year replacement product or parts
Showers
- 20 years cover for replacement product or parts only*
- 1 year cover for labour
*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.
Taps, Outlets & Mixers
- 20 years cover for replacement product or parts only†
- 10 years cover for Tapware Engine* replacement parts only
- 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles
*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.
Finishes (Accessories, Showers, Taps, Outlets & Mixers)
- 20 years cover for PVD (Physical Vapour Deposition) product finish
- 20 years cover for Chrome product finish
- 10 years cover for all other product finishes
Toilets
- Toilet suites – 20 year replacement product*; 1 year parts & labour
- Toilet Seats – 1 year replacement product or parts
- Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
- Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)
*Excludes inlet and outlet valve washers – 1 year parts and labour only.
Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.
Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.
Wastes & Traps – 1 Year
Kitchen Accessories – 1 Year
Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.
For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.
Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Soak the big pots on one side, rinse and prep on the other. The Oliveri Nu-Petite 1 & 3/4 bowl topmount sink drainer 1TH is a practical pick when you're replacing a tired kitchen sink or fitting out a new benchtop. The main bowl holds up to 30 litres, so there's room for large pots and pans. The smaller second bowl takes care of rinsing and prep. It's made from stainless steel at Oliveri's Adelaide factory, so it stands up to daily use and stays easy to clean year after year. It drops in from the top with a single tap hole. You also get an integrated colander and a bamboo preparation board that sit neatly inside the main bowl, which means less juggling on a crowded bench.
- Stainless steel construction that's durable and simple to maintain, so it keeps looking good with minimal fuss
- Overall dimensions of 1150mm x 500mm x 218mm, giving you a generous work area without dominating the bench
- Main bowl sized 380mm x 420mm for soaking and washing bigger cookware
- Secondary bowl sized 280mm x 350mm for rinsing, draining and food prep
- Included colander and bamboo preparation board fit within the main bowl for handy extra prep space
- Available in right hand and left hand drainer, so it works with your kitchen layout
Check your cutout size and benchtop against the 1150mm x 500mm x 218mm dimensions before ordering. Need a hand? Ask your plumber to confirm the fit.
What's In The Box
1 x Sink
1 x Installation Instructions
1 x Topmount Clip Kit
2 x 90mm Basket waste
1 x Nu-Petite Main Bowl Colander
1 x Nu-Petite Main Bowl Bamboo Chopping Board
Downloads
Download the specification sheet below:
Oliveri Nu-Petite 1 & 3/4 bowl topmount sink drainer 1TH
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Soaking, hand-washing, filling buckets: a laundry tub earns its keep. The Clark Flushline 45 Litre Laundry Tub is a practical drop-in when you're building or replacing a laundry setup and want a clean, low-profile finish. It's designed to sit under custom benchtops, so it works whether you're installing fresh or swapping out a tired old unit. You can fit it in standard width or in a space-saving compact width, handy when the laundry is tight on room. The 45 litre bowl is deep enough for the big jobs. One thing to note: it doesn't come with a washing machine by-pass, so factor that in with your plumber.
- Deep bowl gives you plenty of room for filling buckets, washing the dog or loading up an ice chest before a BBQ
- Compact width option suits smaller laundries where every millimetre counts
- Built-in basket waste keeps the plug where you need it, so there's one less thing to lose
- Low-profile design pairs neatly with custom benchtops for a tidy, integrated look
Check whether you need a washing machine by-pass and confirm your bench cut-out size before ordering. Need a hand? Ask your plumber.
What's In The Box
Downloads
Download the installation instructions below:
Clark Flushline 45 Litre Laundry Tub
Warranty
Clark products are covered by warranties of up to a Lifetime*
Clark products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.
Baths
- Bath shell – 10 Years
- Labour, replacement product or parts – 1 Year
Basins
- Basins – 10 Year replacement product; 1 year parts and labour
- Wastes & Pop Up Plugs – 1 Year replacement product; 1 year parts and labour
Sinks & Tubs
- Sinks – Lifetime replacement product or parts; 1 year replacement product/parts & labour
- Tubs – Lifetime replacement product or parts; 1 year replacement product/parts & labour
- Cabinets – 5 Year replacement product or parts; 1 year labour
- Accessories & Spare parts – 1 Year replacement product or parts
Showers
- 10 year replacement product; 1 year parts, finishes & labour
Taps, Outlets & Mixers
- 10 year replacement product or parts; 1 year labour, finishes & ceramic disc spindles
Kitchen Accessories
- 1 Year replacement product or parts
Bathroom Accessories
- 5 years replacement product; 1 year finishes, wall fixing, mounting brackets & metal flex hoses
Should any warranty claim be made and attended to by a Clark authorised Service Agent and, in the opinion of the Service Agent or Clark, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or from some other cause other than a manufacturing defect of the goods for which Clark is responsible, Clark Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.
For After Sales & Service enquiries you can contact Clark directly on 13 14 16 for assistance. To view the Clark Warranty Document, click here.
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Big bowl for the pots, small bowl for the prep. The Clark Polar 1.5 Bowl Undermount/Overmount Kitchen Sink handles both, whether you're replacing a worn sink or fitting out a new kitchen. It mounts two ways: under the bench for a clean edge, or over the top for an easier install. You get a large 26L bowl for pots and pans plus a small 16L bowl for rinsing. It's built from premium 304 grade stainless steel, so it takes daily use and wipes clean without fuss. A stainless steel basket waste comes in the box, which means one less trip back to the shop. Quality you can trust at a fair price.
- Fits undermount or overmount configurations, so you can match it to your benchtop and the look you're after
- Large 26L and small 16L bowls give you room to wash big items while keeping a second bowl free for prep
- Made from premium 304 grade stainless steel for lasting durability and a finish that wipes clean
- Available with 0 or 1 tap holes to suit your mixer or wall-mounted tap setup
- Choice of left or right hand bowl, so the layout works with your bench and drainer
- Includes a stainless steel basket waste, ready to install
- Optional accessories available to build out the sink to suit how you work
Decide on your tap hole count and bowl orientation before ordering, or check with your plumber to match your existing plumbing.
Specifications
| Construction Material | 304 Grade Stainless Steel |
| Finish | Polished Stainless Steel |
| Capacity | 26L (Large), 16L (Small) |
| Overall Dimensions (Overmount) | 695mm (L) x 475mm (W) x 200mm (D) |
| Overall Dimensions (Undermount) | 695mm (L) x 455mm (W) x 200mm (D) |
| Large Bowl Dimensions | 355mm (L) x 405mm (W) x 200mm (D) |
| Small Bowl Dimensions | 255mm (L) x 405mm (W) x 175mm (D) |
| Mounting | Undermount or Overmount |
What's In The Box
- Clark Polar 1.5 Bowl Undermount/Overmount Kitchen Sink
- Stainless Steel Basket Waste
Downloads
Download the installation instructions below:
Clark Polar 1.5 Bowl Undermount/Overmount Kitchen Sink
Warranty
Caroma products are covered by warranties of up to a Lifetime*
Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.
Baths
- Bath shell – 20 Years
- Labour, replacement product or parts – 1 Year
Basins
- Basins – 20 year replacement product; 1 year parts & labour
- Basin Dress Rings – 5 year replacement product
Sinks & Tubs
- Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
- Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
- Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
- Accessories & Spare parts – 1 year replacement product or parts
Showers
- 20 years cover for replacement product or parts only*
- 1 year cover for labour
*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.
Taps, Outlets & Mixers
- 20 years cover for replacement product or parts only†
- 10 years cover for Tapware Engine* replacement parts only
- 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles
*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.
Finishes (Accessories, Showers, Taps, Outlets & Mixers)
- 20 years cover for PVD (Physical Vapour Deposition) product finish
- 20 years cover for Chrome product finish
- 10 years cover for all other product finishes
Toilets
- Toilet suites – 20 year replacement product*; 1 year parts & labour
- Toilet Seats – 1 year replacement product or parts
- Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
- Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)
*Excludes inlet and outlet valve washers – 1 year parts and labour only.
Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.
Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.
Wastes & Traps – 1 Year
Kitchen Accessories – 1 Year
Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.
For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.
Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Small kitchen, one good bowl? The Oliveri Diaz Single Bowl Topmount Sink with Right Hand Drainer fits a 500mm cabinet and still gives you a full square cornered bowl with a drainer on the right. At 770mm wide it suits apartments, granny flats and galley kitchens. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick. Topmount fit with one tap hole punched for a mixer. In the box: a basket waste, mounting clips, a colander, a bamboo chopping board and sealing foam, so prep and draining are sorted straight away. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).
- Single bowl with a right hand drainer in a 770mm footprint for compact kitchens
- Fits a 500mm cabinet, which keeps cupboard space for everything else
- 18/10 polished 304 grade stainless steel at 0.9mm thick for a long life
- One tap hole punched for a sink mixer
- Colander and bamboo chopping board included to double the bowl as a prep station
- Basket waste, mounting clips and sealing foam supplied
- Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)
Cut the bench at 750 x 460mm with 15mm radius corners. Your plumber connects the single waste.
Want the drainer on the other side? The Oliveri Diaz Single Bowl Sink with Left Hand Drainer is the match.
Specifications
Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 770 x 192 x 480 mm
Tap holes: Available 0 or 1 tap hole (specify when ordering)
Cut out size: 750 x 460 x 15mm radius
Minimum cabinet size: 500mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)
What's In The Box
- Sink
- 1 x basket waste
- Mounting clips
- Colander
- Bamboo chopping board
- Sealing foam
Downloads
Oliveri Diaz single bowl topmount sink with R/H drainer Spec Sheet
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Old laundry tub gone rusty round the plughole? The Clark Square 25L Laundry Sink is a straight replacement, and a tidy pick for a new laundry too. It drops in as an overmount, so it sits on top of your benchtop for a simpler fit. The 304 grade stainless steel handles daily washing, soaking and scrubbing without fuss, and the square lines suit most laundry setups. A concealed by-pass keeps the plumbing out of sight under the tub. Order it with 0 or 1 tap holes, depending on whether your mixer sits on the sink or the benchtop. Twenty-five litres is plenty of room for the jobs nobody puts in the machine. Quality that stands up to the work, at a fair price.
- Made from premium 304 grade stainless steel, so it resists rust and stains through years of laundry duty
- Overmount installation means it sits over your benchtop for a simpler fit
- Concealed by-pass hides the connection for a tidy finish under the tub
- Comes with a stainless steel basket waste, so there's one less part to buy separately
- Available with 0 or 1 tap holes to match where your tapware sits
Decide on the 0 or 1 tap hole version before ordering. Need a hand? Ask your plumber.
What's In The Box
Downloads
Download the installation instructions below:
Warranty
Clark products are covered by warranties of up to a Lifetime*
Clark products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.
Baths
- Bath shell – 10 Years
- Labour, replacement product or parts – 1 Year
Basins
- Basins – 10 Year replacement product; 1 year parts and labour
- Wastes & Pop Up Plugs – 1 Year replacement product; 1 year parts and labour
Sinks & Tubs
- Sinks – Lifetime replacement product or parts; 1 year replacement product/parts & labour
- Tubs – Lifetime replacement product or parts; 1 year replacement product/parts & labour
- Cabinets – 5 Year replacement product or parts; 1 year labour
- Accessories & Spare parts – 1 Year replacement product or parts
Showers
- 10 year replacement product; 1 year parts, finishes & labour
Taps, Outlets & Mixers
- 10 year replacement product or parts; 1 year labour, finishes & ceramic disc spindles
Kitchen Accessories
- 1 Year replacement product or parts
Bathroom Accessories
- 5 years replacement product; 1 year finishes, wall fixing, mounting brackets & metal flex hoses
Should any warranty claim be made and attended to by a Clark authorised Service Agent and, in the opinion of the Service Agent or Clark, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or from some other cause other than a manufacturing defect of the goods for which Clark is responsible, Clark Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.
For After Sales & Service enquiries you can contact Clark directly on 13 14 16 for assistance. To view the Clark Warranty Document, click here.
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Wash, rinse, stack, drain. The Oliveri Lakeland double bowl topmount sink drainer 1TH gives you room for all of it, whether you're replacing a worn kitchen sink or fitting out a new benchtop. Two bowls plus an integrated drainer keep the wet work to one side. It's stainless steel, so it takes daily use and wipes clean without fuss. The topmount design drops straight into your benchtop cutout, and the single tap hole keeps your mixer setup simple. Overall dimensions are 1200mm x 480mm x 166mm, with main bowl sizes of 330mm x 385mm. Available in both right hand and left hand drainer, so it can run the same way your kitchen does.
- Stainless steel construction that holds up well to years of kitchen use and stays looking tidy.
- Two bowls plus a drainer, giving you plenty of space for washing up and letting dishes dry.
- Main bowl sizes of 330mm x 385mm, roomy enough for pots and larger cookware.
- Overall dimensions of 1200mm x 480mm x 166mm, so you can check it against your benchtop before you order.
- Available in right hand and left hand drainer to suit which way your kitchen runs.
- Easy to maintain, which means a quick wipe keeps it clean day to day, no scrubbing marathon required.
Confirm your benchtop cutout suits the 1200mm x 480mm footprint before ordering. Need a hand? Ask your plumber to check the fit.
What's In The Box
Downloads
Download the specification sheet below:
Oliveri Lakeland double bowl topmount sink drainer 1TH
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Big pots in the main bowl, rinsing in the half. The Oliveri LakeLand 1 & 1/2 bowl topmount sink drainer 1TH is a practical pick when you're replacing a worn sink or fitting out a new kitchen. It drops into your benchtop from above, so your plumber's job is straightforward. The full main bowl takes the big pots and pans. The half bowl gives you room to rinse, drain or stack. It's stainless steel, so it handles daily use and wipes clean without fuss. This range is made at Oliveri's factory in Adelaide, so you're getting quality you can trust at a fair price.
- Stainless steel construction that resists staining and holds up to years of kitchen use.
- Overall dimensions of 980mm x 480mm x 164mm, so you can check the fit against your benchtop before ordering.
- Main bowl size 330mm x 385mm for larger cookware and everyday washing up.
- Secondary bowl size 200mm x 290mm, handy for rinsing and food prep.
- Available in right hand and left hand drainer to suit your kitchen layout.
- Easy to maintain surface that keeps looking good with a simple wipe down, no special products required.
Measure your cabinet and benchtop cut-out before ordering, and confirm which drainer side works for your layout. Need a hand? Ask your plumber.
What's In The Box
Downloads
Download the specification sheet below:
Oliveri LakeLand 1 & 1/2 bowl topmount sink drainer 1TH
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Bowl on one side, drainer on the other. The Oliveri Lakeland single bowl topmount sink drainer 1TH is a straightforward stainless steel sink for kitchens and laundries, whether you're replacing a worn-out sink or fitting out a new benchtop. It sits on top of your bench, so the install stays simple and clean. Stainless steel handles daily use and wipes down easily, which makes it a practical pick for a busy kitchen or an investment property. Overall dimensions are 770mm x 480mm x 164mm, with a bowl size of 330mm x 385mm. There's a single tap hole (1TH) and an integrated drainer, so wet dishes and rinsed produce stay out of the bowl. Made by Oliveri at their Adelaide factory, which counts for something.
- Stainless steel construction that stands up to knocks, heat and everyday wear
- Topmount design that drops into your benchtop cut-out for a simple install
- Single tap hole (1TH) ready for your mixer or tap of choice
- Integrated drainer for draining dishes and rinsing produce
- Overall dimensions 770mm x 480mm x 164mm with a 330mm x 385mm bowl
- Easy to clean and maintain, so it keeps looking tidy with a quick wipe
Available with the drainer on the right hand or left hand side, so check which suits your bench layout before ordering.
What's In The Box
Downloads
Download the specification sheet below:
Oliveri Lakeland single bowl topmount sink drainer 1TH
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Big bowl for the pots, smaller one for the rinsing, and a drainer for everything else. The Oliveri LakeLand 1 & 3/4 bowl topmount sink drainer 1TH is a solid choice when you're replacing a tired kitchen sink or fitting out a new bench. It's made from stainless steel at Oliveri's Adelaide factory, so it takes daily use and wipes clean without fuss. The larger main bowl handles pots and pans. The second bowl gives you room to rinse or drain. Overall it measures 1080mm x 480mm x 164mm, so check that against your benchtop cutout before you order. The single tap hole keeps things simple for your mixer, and the drainer helps keep water off the bench, which your timber will thank you for.
- Stainless steel construction, so it stands up to years of everyday kitchen work.
- Overall dimensions of 1080mm x 480mm x 164mm, giving you the exact footprint to match against your bench.
- Main bowl sized 330mm x 385mm, with plenty of depth for larger cookware.
- Secondary bowl sized 270mm x 330mm, handy for rinsing and food prep.
- Available in right hand and left hand drainer, so it suits your bench layout.
- Easy to maintain, which means a quick wipe keeps it looking sharp.
Confirm which side you need for the drainer, right or left hand, and measure your cutout before ordering. Need a hand? Ask your plumber.
What's In The Box
Downloads
Download the specification sheet below:
Oliveri LakeLand 1 & 3/4 bowl topmount sink drainer 1TH
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Kitchen tap past its best? The Caroma Riviere Sink Mixer in Chrome is a single lever mixer for your kitchen sink. It stands 378mm tall with 230mm to the spout and a 220mm reach, so there's room to fill a stockpot or rinse a baking tray. The spout swivels and can be set to turn through 70 or 140 degrees. A 35mm ceramic disc cartridge sits inside a lead free brass body. Out of the box it's WELS 5 star at 6.0 litres a minute, and a WELS 6 star aerator at 4.5 litres a minute is supplied if you'd like to save more water. Caroma backs it with a 20 year warranty.
- 378mm tall with 230mm to the spout, so big pots and jugs fit under easily
- 220mm reach that brings the water out towards the middle of the sink
- Swivel spout you can set to 70 or 140 degrees of rotation
- 35mm ceramic disc cartridge on a single lever for smooth control
- WELS 5 star at 6.0 litres a minute, with a WELS 6 star 4.5 litre aerator in the box
- Lead free brass body in a chrome finish
- 20 year warranty from Caroma
Needs 150 to 500kPa water pressure. Check there's clearance under any overhead cupboard for the 378mm height. If you'd rather a pull out spray, see the Caroma Riviere Pull Out Sink Mixer, or carry the look into the bathroom with the Riviere Basin Mixer.
Also available in Brushed Nickel, Brushed Bronze and Brushed Brass.
Specifications
- WELS water efficiency: 5 star WELS rated
- WELS water consumption: 6.0L/min
- WELS registration number: T47373 & T47372
- Watermark certification: All Caroma Taps are Watermark Certified
- Construction material: Lead Free Brass
- Finish/coating: Chromeplated
- Operating mechanism: 35mm ceramic disc cartridge
- Temperature rating: 1 - 75°C
- Operating pressure: 150 - 500kPa
- Overall height: 378mm
- Height to spout: 230mm
- Spout reach: 220mm
- Spout function: Swivel, 70deg-140deg rotation
- Warranty: 20 Years
What's In The Box
1 x Sink Mixer, fixing kit, installation instructions
Downloads
Download the installation instructions below:
Caroma Riviere Sink Mixer Chrome Installation Instructions
Warranty
Caroma products are covered by warranties of up to a Lifetime*
Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.
Baths
- Bath shell – 20 Years
- Labour, replacement product or parts – 1 Year
Basins
- Basins – 20 year replacement product; 1 year parts & labour
- Basin Dress Rings – 5 year replacement product
Sinks & Tubs
- Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
- Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
- Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
- Accessories & Spare parts – 1 year replacement product or parts
Showers
- 20 years cover for replacement product or parts only*
- 1 year cover for labour
*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.
Taps, Outlets & Mixers
- 20 years cover for replacement product or parts only†
- 10 years cover for Tapware Engine* replacement parts only
- 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles
*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.
Finishes (Accessories, Showers, Taps, Outlets & Mixers)
- 20 years cover for PVD (Physical Vapour Deposition) product finish
- 20 years cover for Chrome product finish
- 10 years cover for all other product finishes
Toilets
- Toilet suites – 20 year replacement product*; 1 year parts & labour
- Toilet Seats – 1 year replacement product or parts
- Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
- Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)
*Excludes inlet and outlet valve washers – 1 year parts and labour only.
Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.
Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.
Wastes & Traps – 1 Year
Kitchen Accessories – 1 Year
Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.
For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.
Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Need a tub that swallows a full load of soaking and lets the washing machine drain through it too? The Oliveri Laundry 70L Tub with Rinse Bypass does both. The 70 litre bowl is the larger of Oliveri's two tub sizes, and the rinse bypass gives the machine hose its own inlet so it's never in the way. Made in Adelaide, South Australia, from 304 grade stainless steel at 0.9mm thick, pressed as one piece with soundproofing underneath. It's a topmount tub with two tap holes punched for a hot and cold set. In the box you get the tub, a 90mm basket waste, adjustable clips and the rinse bypass fitting. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).
- 70 litre bowl with room for sheets, work clothes and a bucket at the same time
- Rinse bypass inlet for the washing machine drain hose, keeping the bowl clear
- 0.9mm 304 grade stainless steel that handles hot water and harsh laundry products
- Two tap holes punched to take a standard laundry tap set
- Single piece pressing with soundproofing underneath for quieter filling
- Australian made in Adelaide and backed by a lifetime manufacturer's warranty (see Oliveri's terms)
Allow a 700mm cabinet and a 610 x 530mm cut-out with 10mm radius corners. Your plumber connects the bypass and basket waste.
The smaller Oliveri Laundry 45L Tub with Rinse Bypass suits a 600mm cabinet if space is tight.
Specifications
Construction material: 304 grade stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 630 x 315 x 550 mm
Tap holes: Available 0 - 2 tap hole (specify positioning when
Cut out size: 610 mm x 530 mm (with R10 mm corners)
Minimum cabinet size: 700 mm
Overflow: And bypass options
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)
What's In The Box
- Sink
- 1 x 90 mm basket waste
- Adjustable clips
- Rinse bypass
Downloads
Oliveri Laundry 70L tub with rinse bypass 2TH Spec Sheet
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Big pots, roasting trays, the platters that never fit in the dishwasher: they all need somewhere to go. The Clark Horizon 1.75 End Bowl Kitchen Sink is a practical overmount replacement for a busy family kitchen, whether you're swapping out a tired sink or fitting out a new benchtop. The main bowl runs deep. The drainer pattern is shaped to channel water back into the bowl, so you get a clean, modern look without puddles on the bench. It's made from 304 Grade Stainless Steel, built to last for years of daily use. It comes with one taphole, and there's a left or right bowl configuration to match your existing plumbing layout.
- Large, deep bowls give you plenty of space, handy for bigger families or keen cooks
- 304 Grade Stainless Steel construction stands up to the wear of everyday kitchen use
- One taphole with left or right bowl options, so you can suit your bench and plumbing
- Built-in basket wastes make food prep and clean-up simpler
- Integrated drainer tray keeps washing up tidy and draining back into the bowl
- Neutral overmount styling that works with any kitchen, so it won't date on you
Check the cutout in your existing benchtop before ordering, or ask your plumber to confirm the fit.
What's In The Box
Downloads
Download the installation instructions below:
Clark Horizon 1.75 End Bowl Kitchen Sink
Warranty
Clark products are covered by warranties of up to a Lifetime*
Clark products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.
Baths
- Bath shell – 10 Years
- Labour, replacement product or parts – 1 Year
Basins
- Basins – 10 Year replacement product; 1 year parts and labour
- Wastes & Pop Up Plugs – 1 Year replacement product; 1 year parts and labour
Sinks & Tubs
- Sinks – Lifetime replacement product or parts; 1 year replacement product/parts & labour
- Tubs – Lifetime replacement product or parts; 1 year replacement product/parts & labour
- Cabinets – 5 Year replacement product or parts; 1 year labour
- Accessories & Spare parts – 1 Year replacement product or parts
Showers
- 10 year replacement product; 1 year parts, finishes & labour
Taps, Outlets & Mixers
- 10 year replacement product or parts; 1 year labour, finishes & ceramic disc spindles
Kitchen Accessories
- 1 Year replacement product or parts
Bathroom Accessories
- 5 years replacement product; 1 year finishes, wall fixing, mounting brackets & metal flex hoses
Should any warranty claim be made and attended to by a Clark authorised Service Agent and, in the opinion of the Service Agent or Clark, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or from some other cause other than a manufacturing defect of the goods for which Clark is responsible, Clark Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.
For After Sales & Service enquiries you can contact Clark directly on 13 14 16 for assistance. To view the Clark Warranty Document, click here.
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Wash up in the middle, drain on either side. The Oliveri Ultraform single bowl topmount sink with double drainer is a practical swap for a tired kitchen sink, and a solid pick for a new benchtop. It drops in from the top, so installation is straightforward for your plumber. It's made from stainless steel at Oliveri's Adelaide factory, so it handles daily use and stays easy to clean year after year. The bowl measures 385mm x 330mm, with drainers each side for stacking and prep. Overall it's 1180mm x 470mm x 171mm, so it needs a decent run of bench. Get the tape measure out first. Quality you can trust at a fair price.
- Stainless steel construction that resists knocks and wear, so it holds up to everyday kitchen use
- Bowl size of 385mm x 330mm suits everyday washing up and larger pots and pans
- Double drainers each side of the bowl give you extra space to drain dishes and prep food
- Overall dimensions of 1180mm x 470mm x 171mm for a full topmount fit across a wide benchtop
- Available in 1 taphole, 3 tapholes and 0 taphole, so you can match it to your mixer setup
- Easy to maintain, wiping clean with minimal fuss
Check your benchtop cut-out and taphole requirements before ordering, or ask your plumber to confirm the fit.
What's In The Box
1 x Sink
1 x Installation Instructions
1 x Adjustable Clip Kit
1 x Oliveri Basket Waste
Downloads
Download the specification sheet below:
Oliveri Ultraform single bowl topmount sink dbl drainer
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Rinsing a handful of berries shouldn't need a full colander. The Oliveri 1/2 Bowl Colander is made for the half bowl of Oliveri sinks, at 300 x 110 x 215mm, so it rests in the small bowl and leaves the main bowl free. It's food grade plastic in black, light enough to lift out one handed and shake dry. Check it against your half bowl size as it suits some Oliveri sinks and not others. Covered by a 1 year warranty on replacement parts.
- Sized for the half bowl, which keeps the main bowl free for washing up
- Food grade plastic in black that's safe for rinsing fruit and veg
- 300 x 110 x 215mm and light enough to shake out one handed
- Fits some Oliveri sinks, so measure your half bowl first
- 1 year warranty on replacement parts
Measure the top of your half bowl against 300 x 215mm before ordering.
For the main bowl, see the Oliveri Diaz and Petite Main Bowl Colander or the Stainless Steel Deep Colander.
Specifications
Construction material: Food Grade Plastic
Finish/coating: Black
Overall dimensions (W x D x H): 300 x 110 x 215 mm
Country of origin: China
Warranty: 1 year replacement parts only
What's In The Box
- Colander
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Replacing a worn kitchen sink, or fitting out a fresh benchtop? The Oliveri Martini Single Bowl Topmount Sink With Drainer drops in from the top, so it's a straightforward job for your plumber. It's made from stainless steel at Oliveri's Adelaide factory, which means it handles daily use and stays easy to clean. The single bowl measures 330mm x 270mm, with an overall size of 740mm x 350mm x 170mm. There's an integrated colander too, sitting neatly within the main bowl for prepping and draining. Rinse the spuds, drain them, done. Quality you can trust at a fair price, ready for the kitchen jobs that stack up.
- Stainless steel construction for strength that stands up to everyday wear and cleaning
- Generous single bowl at 330mm x 270mm, giving you room for larger pots and pans
- Overall dimensions of 740mm x 350mm x 170mm, so you can check the fit against your existing cut-out
- Integrated colander sits inside the main bowl, handy for rinsing and draining without extra clutter
- Available with left hand or right hand drainer, and with the option of 1 taphole or no taphole to suit your layout
Measure your bench cut-out and confirm the drainer orientation and taphole option before ordering. Need a hand? Ask your plumber.
What's In The Box
Downloads
Download the specification sheet below:
Oliveri Martini Single Bowl Topmount Sink With Drainer
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Cooking for a crowd and short on bench? The Oliveri Diaz 1 and 3/4 Bowl Topmount Sink with Right Hand Drainer gives you a full main bowl, a three quarter second bowl that's big enough for actual washing up, and a drainer on the right, across 1080mm. Square cornered bowls make the most of every millimetre. It's made in Adelaide, South Australia, from 18/10 polished 304 grade stainless steel at 0.9mm thick, fitted topmount with one tap hole punched. Oliveri packs in two basket wastes, mounting clips, a colander, a bamboo chopping board and sealing foam. Backed by a lifetime manufacturer's warranty (see Oliveri's terms).
- Main bowl and a three quarter bowl, so both sides take real washing up
- Right hand drainer with the bowls to the left as you stand at the sink
- 18/10 polished 304 grade stainless steel at 0.9mm thick that handles daily knocks
- One tap hole punched for a sink mixer
- Colander and bamboo chopping board in the box for prep over the bowls
- Two basket wastes, mounting clips and sealing foam supplied
- Made in Adelaide, South Australia, and backed by a lifetime manufacturer's warranty (see Oliveri's terms)
Needs a 700mm cabinet and a 1060 x 460mm cut-out with 15mm radius corners. Ask your plumber to connect both wastes.
Same layout, drainer on the other side? See the Oliveri Diaz 1 and 3/4 Bowl Sink with Left Hand Drainer.
Specifications
Construction material: 304 grade, 18/10 polished stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 1080 x 192 x 480 mm
Tap holes: Available 0 to 3 tap hole (specify when ordering)
Cut out size: 1060 x 460 x 15mm radius
Minimum cabinet size: 700mm
Overflow: Not available
Country of origin: Australia
Warranty: Lifetime Manufacturer's warranty (refer to oliveri.com.au)
What's In The Box
- Sink
- 2 x basket waste
- Mounting clips
- Colander
- Bamboo chopping board
- Sealing foam
Downloads
Oliveri Diaz 1 & 3/4 bowl topmount sink with R/H drainer Spec Sheet
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
$58.00
Own a Diaz, Petite or Flinders sink? The Oliveri Diaz and Petite Main Bowl Colander in charcoal is sized for the main bowl of those three Oliveri ranges, at 345 x 110 x 150mm, so it sits in the bowl for rinsing and draining. It's food grade plastic, light to lift and easy to rinse clean. Handy as a spare if your sink came with one and it's always in use. Covered by a 1 year warranty on replacement parts.
- Fits the main bowl of Oliveri Diaz, Petite and Flinders sinks
- Food grade plastic in charcoal that's kind to the stainless bowl
- 345 x 110 x 150mm, which leaves room to work beside it
- Drains over the bowl, so the bench stays dry
- 1 year warranty on replacement parts
Confirm your range before ordering; other Oliveri sinks take different sizes.
The Oliveri Diaz and Petite Main Bowl Bamboo Chopping Board sits over the same bowl for prep.
Specifications
Construction material: Food Grade Plastic
Finish/coating: Black
Overall dimensions (W x D x H): 345 x 110 x 150 mm
Country of origin: China
Warranty: 1 year replacement parts only
What's In The Box
- Colander
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Soak the pots on one side, rinse on the other. The Clark Polar Double Bowl Undermount/Overmount Kitchen Sink is a practical pick when you're replacing a tired sink or fitting out a new benchtop. It goes in as an undermount or an overmount, so it suits most kitchen layouts and gives your plumber options on the day. It's built from premium 304 grade stainless steel, which handles daily use and keeps its look over the long run. Two generous bowls at 26L each mean there's room to wash and rinse at once. Stainless steel basket wastes come in the box, and you can choose 0 or 1 tap holes to match your mixer. Handy when the dishes have quietly stacked up.
- Undermount or overmount installation, so you can mount it above or beneath the benchtop to suit your kitchen
- Premium 304 grade stainless steel for lasting durability and easy cleaning
- 26L per bowl across two bowls, giving you space to wash and rinse at the same time
- Stainless steel basket wastes included, so the essentials are sorted from the start
- Available in 0 or 1 tap holes to work with your chosen tap or mixer
- Optional accessories available, so you can build out your setup as you need
Check your benchtop cut-out and cabinet size before ordering. Need a hand? Ask your plumber to confirm the fit.
Specifications
| Construction Material | 304 Grade Stainless Steel |
| Finish | Polished Stainless Steel |
| Capacity | 26L |
| Overall Dimensions (Overmount) | 795mm (L) x 475mm (W) x 200mm (D) |
| Overall Dimensions (Undermount) | 790mm (L) x 455mm (W) x 200mm (D) |
| Bowl Dimensions | 355mm (L) x 405mm (W) x 200mm (D) |
| Mounting | Undermount or Overmount |
What's In The Box
- Clark Polar Double Bowl Undermount/Overmount Kitchen Sink
- Stainless Steel Basket Waste
Downloads
Download the installation instructions below:
Clark Polar Double Bowl Undermount/Overmount Kitchen Sink
Warranty
Clark products are covered by warranties of up to a Lifetime*
Clark products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.
Baths
- Bath shell – 10 Years
- Labour, replacement product or parts – 1 Year
Basins
- Basins – 10 Year replacement product; 1 year parts and labour
- Wastes & Pop Up Plugs – 1 Year replacement product; 1 year parts and labour
Sinks & Tubs
- Sinks – Lifetime replacement product or parts; 1 year replacement product/parts & labour
- Tubs – Lifetime replacement product or parts; 1 year replacement product/parts & labour
- Cabinets – 5 Year replacement product or parts; 1 year labour
- Accessories & Spare parts – 1 Year replacement product or parts
Showers
- 10 year replacement product; 1 year parts, finishes & labour
Taps, Outlets & Mixers
- 10 year replacement product or parts; 1 year labour, finishes & ceramic disc spindles
Kitchen Accessories
- 1 Year replacement product or parts
Bathroom Accessories
- 5 years replacement product; 1 year finishes, wall fixing, mounting brackets & metal flex hoses
Should any warranty claim be made and attended to by a Clark authorised Service Agent and, in the opinion of the Service Agent or Clark, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or from some other cause other than a manufacturing defect of the goods for which Clark is responsible, Clark Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.
For After Sales & Service enquiries you can contact Clark directly on 13 14 16 for assistance. To view the Clark Warranty Document, click here.
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Soaking a muddy footy jersey, or rinsing out a paint roller? That's what a proper laundry tub is for. The Caroma Urbane II 35 Litre Stainless Steel Laundry Tub gives you the room to do it, and it's a practical swap for one that's seen better days. It's made from 304 grade stainless steel, so it stands up to daily use and keeps looking good for years. The tub measures 380mm x 550mm, which makes it worth checking against your existing benchtop or cabinetry first. A single bypass kit and stainless steel basket waste come in the box, so the key parts arrive in one purchase. Clean lines and modern styling run right through the Urbane II range too.
- Generous 35L tub gives you room to soak and hand-wash larger items
- Made from premium 304 grade stainless steel for lasting durability
- Sized at 380mm x 550mm to suit a straightforward replacement
- Supplied with a single bypass kit and stainless steel basket waste, so it's a complete solution
- Simple, clean lines that suit a modern laundry
Confirm your available bench and cabinet space against the 380mm x 550mm dimensions, or ask your plumber before you buy.
Team it with the matching Urbane II range to keep your kitchen, laundry and alfresco spaces looking the part.
Specifications
Overall length: 380mm
Overall width: 550mm
Overall depth: 226mm
Inner bowl dimensions: 330mm x 450mm x 226mm
Capacity: 35L
Plug & waste: Includes stainless steel basket waste
Installation: Inset (drop-in)
Warranty: 7 year replacement product/parts and labour
What's In The Box
Downloads
Download the installation instructions below:
Caroma Urbane II 35 Litre Stainless Steel Laundry Tub
Warranty
Caroma products are covered by warranties of up to a Lifetime*
Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.
Baths
- Bath shell – 20 Years
- Labour, replacement product or parts – 1 Year
Basins
- Basins – 20 year replacement product; 1 year parts & labour
- Basin Dress Rings – 5 year replacement product
Sinks & Tubs
- Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
- Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
- Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
- Accessories & Spare parts – 1 year replacement product or parts
Showers
- 20 years cover for replacement product or parts only*
- 1 year cover for labour
*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.
Taps, Outlets & Mixers
- 20 years cover for replacement product or parts only†
- 10 years cover for Tapware Engine* replacement parts only
- 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles
*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.
Finishes (Accessories, Showers, Taps, Outlets & Mixers)
- 20 years cover for PVD (Physical Vapour Deposition) product finish
- 20 years cover for Chrome product finish
- 10 years cover for all other product finishes
Toilets
- Toilet suites – 20 year replacement product*; 1 year parts & labour
- Toilet Seats – 1 year replacement product or parts
- Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
- Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)
*Excludes inlet and outlet valve washers – 1 year parts and labour only.
Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.
Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.
Wastes & Traps – 1 Year
Kitchen Accessories – 1 Year
Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.
For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.
Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
$454.00
Old kitchen sink gone dull and pitted? The Phoenix 1000 Series Single Bowl Sink 765 x 480mm is a practical swap, and a great-value pick if you're fitting out a new benchtop. It measures 765 W x 480mm L with a 183mm depth, so you get a roomy single bowl for the everyday washing up. It's made from 304 grade stainless steel at 0.8mm thickness, with a machine pressed design that stands up to daily use. It's an overmount sink, so it sits on top of your benchtop rather than under it. A stainless steel basket waste comes included, ready to go with the centre waste position. Quality at a fair price, whether it's a busy family kitchen or a rental.
- Built from 304 grade stainless steel, which resists rust and holds up well to cleaning products over the years
- 0.8mm thickness and a machine pressed design for solid, reliable performance day to day
- Single bowl measuring 765 W x 480mm L with 183mm depth, deep enough for pots and pans
- Overmount installation only, so it drops in over the top of your benchtop for a straightforward fit
- Centre waste position keeps drainage tidy and predictable
- Stainless steel basket waste included, so there's one less part to buy separately
- All Phoenix Sink Wastes are Watermark Certified, so the drainage side meets Australian plumbing requirements
Overmount only, so check your benchtop cut-out suits a top-mount sink before ordering. Need a hand? Ask your plumber.
Specifications
Watermark certification: All Phoenix Sink Wastes are Watermark Certified
Construction material: 304 Stainless Steel
Material thickness: 0.8mm
Finish/ coating: Stainless Steel
What's In The Box
1 x Stainless Steel Single Bowl Sink
1 x Stainless Steel Basket Waste
1 x Sink Fixing Kit
Warranty
Phoenix Tapware products are covered by warranties of up to a Lifetime*
Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).
Showers
- LuxeXP – Lifetime replacement products or parts, 1 year labour
- NX Showers – Lifetime replacement products or parts, 1 year labour
- Standard Showers – 15 Years replacement product or parts, 1 year labour
- Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers
Sinks
- Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
- Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste
Accessories
- Standard Finish – 7 Years replacement product or parts
- Coloured Finish – 7 Years replacement product or parts
Wastes & Traps
- 1 Year replacement product or parts
Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.
To view the Phoenix Warranty Document, click here.
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Want a colander that sits across the bowl rather than in the bottom of it? The Oliveri Stainless Steel Professional Colander is a wide, shallow 445 x 270mm colander at 75mm deep in 304 stainless steel, which fits into the bowl of some Oliveri sinks for rinsing greens, draining pasta or thawing under the tap. Steel means no stains or odours, and it rinses clean. Measure your bowl first. Covered by a 1 year warranty on replacement parts.
- 304 stainless steel that won't stain, warp or hold smells
- Wide 445 x 270mm shape, so produce spreads out and drains fast
- 75mm deep, which leaves working room beneath it in the bowl
- Fits into the bowl of some Oliveri sinks, so check your size
- 1 year warranty on replacement parts
Measure the inside of your bowl against 445 x 270mm before ordering.
For a deeper option see the Oliveri Stainless Steel Deep Colander.
Specifications
Construction material: stainless steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 445 x 75 x 270 mm
Country of origin: China
Warranty: 1 year replacement parts only
What's In The Box
- Colander
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Prefer steel to plastic in the sink? The Oliveri Stainless Steel Deep Colander is a 425 x 120 x 165mm colander in stainless steel, deep enough for a pot of potatoes or a full rinse of salad greens. It sits in the bowl of some Oliveri sinks so you drain over the sink rather than the bench, and it cleans up with a rinse. Measure your bowl before ordering. Covered by a 1 year warranty on replacement parts.
- Stainless steel build that won't stain or hold odours like plastic can
- 120mm deep, so it holds a full pot of pasta or vegetables
- 425 x 165mm footprint that sits in the bowl of some Oliveri sinks
- Drains over the sink and rinses clean
- 1 year warranty on replacement parts
Check the 425mm length against the inside of your bowl before you buy.
The Oliveri Cooking Mate Series Dish Rack is the matching stainless basket for draining dishes.
Specifications
Construction material: Stainless Steel
Finish/coating: Stainless Steel
Overall dimensions (W x D x H): 425 x 120 x 165 mm
Country of origin: China
Warranty: 1 year replacement parts only
What's In The Box
- Colander
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Protect the granite composite and gain a chopping board at the same time. The Oliveri Santorini Bamboo Chopping Board is sized to sit on top of Oliveri Santorini sinks, with a 450 x 280mm bamboo surface at 30mm thick, so you prep over the bowl and brush peelings straight in. Lift it clear when you need the full sink, and it stores flat in a cupboard between uses. Covered by a 1 year warranty on replacement parts.
- Sized to sit on top of Oliveri Santorini sinks
- 450 x 280mm bamboo surface with room for serious prep
- 30mm thick so it sits firm while you cut
- Scraps go straight into the bowl below
- 1 year warranty on replacement parts
Hand wash and dry it after use to keep the bamboo flat.
The Oliveri Santorini Drainer Basket is the matching piece for rinsing and drying in the bowl.
Specifications
Construction material: bamboo
Finish/coating: Bamboo
Overall dimensions (W x D x H): 450 x 30 x 280 mm
Country of origin: China
Warranty: 1 year replacement parts only
What's In The Box
- Chopping Board
Warranty
Oliveri toilets are covered by;
- 10 years vitreous china cistern and pan replacement of product
- 2 years valves, fittings and seat replacement
- 1 year seals and labour (refer to Service & Warranty page)
- Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages
Not available online, please reach out to your local Store
Sorry, we are out of stock or no matching shipping rate is available for this product and location.
Full range of kitchen and laundry taps and sinks available
Fitting out a kitchen or laundry, or replacing a sink mixer that has seen better days? Tradelink covers the essentials: kitchen taps, laundry taps, laundry tubs and sink accessories from brands you know, including Oliveri, Clark and Phoenix. Filter by product type, colour or brand to narrow the range.
For a straight replacement, match the number of tap holes and the bowl configuration of your existing sink, and check with your plumber before you order if the new mixer changes your set-out. Everyday prices, delivered Australia-wide.
- Choosing a selection results in a full page refresh.
- Opens in a new window.

























































































































































































































