Bathroom

Fitting out a new kitchen and sick of bench clutter? The Peppy Taps Signature 4 in 1 Electronic Boiling and Ambient Filtered Tap in Brushed Nickel runs filtered boiling and ambient water from a touch-control interface. Tap to call up filtered boiling water, set from 75 to 98 degrees across seven settings, or filtered room-temperature water for the glass, while the lever handles normal hot and cold mains. The outlet is anti-scald. It stands 426mm overall, with 262mm to the swivel spout. Lead free brass, 35mm cartridge, WELS 4 star at 7 litres a minute. Mixer, under-bench boiler unit, Everpure filter cartridge and instructions all come in the box. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Matte Black, Gunmetal, Brushed Brass and Brushed Bronze.

• Touch-control interface for boiling and ambient water, so there's no handle to hold down
• Filtered boiling with 7 settings from 75 to 98 degrees, ready the moment you want it
• Filtered ambient water from the same spout for drinking and cooking
• Anti-scald outlet, which keeps boiling water safer at the sink
• Lead free brass body in a PVD brushed nickel finish, with a 35mm cartridge on the mains side
• Tall profile at 262mm to the spout with a 200mm reach, handy under a window or over a deep sink
• Mixer, boiler unit, filter cartridge and instructions in the box, with a 2 year replacement warranty on parts and labour (12 months commercial)

Single tap hole, 150 to 500kPa water pressure. The touch controls and boiler both need power, so have a power point under the bench and a licensed plumber for the install; the carton is 43 x 37 x 64cm.

Specifications

WELS water efficiency: 4 star wels
WELS water consumption: 7L/min
WELS registration number: T45832 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: PVD
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 426mm
Height to spout: 262mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Want boiling water at the touch of a panel? The Peppy Taps Signature 4 in 1 Electronic Boiling and Ambient Filtered Tap in Gunmetal runs filtered boiling and ambient water from a touch-control interface. Tap to call up filtered boiling water, set from 75 to 98 degrees across seven settings, or filtered room-temperature water for the glass, while the lever handles normal hot and cold mains. The outlet is anti-scald. It stands 426mm overall, with 262mm to the swivel spout. Lead free brass, 35mm cartridge, WELS 4 star at 7 litres a minute. Mixer, under-bench boiler unit, Everpure filter cartridge and instructions all come in the box. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Matte Black, Brushed Nickel, Brushed Brass and Brushed Bronze.

• Touch-control interface for boiling and ambient water, so there's no handle to hold down
• Filtered boiling with 7 settings from 75 to 98 degrees, ready the moment you want it
• Filtered ambient water from the same spout for drinking and cooking
• Anti-scald outlet, which keeps boiling water safer at the sink
• Lead free brass body in a PVD gunmetal finish, with a 35mm cartridge on the mains side
• Tall profile at 262mm to the spout with a 200mm reach, handy under a window or over a deep sink
• Mixer, boiler unit, filter cartridge and instructions in the box, with a 2 year replacement warranty on parts and labour (12 months commercial)

Single tap hole, 150 to 500kPa water pressure. The touch controls and boiler both need power, so have a power point under the bench and a licensed plumber for the install; the carton is 43 x 37 x 64cm.

Specifications

WELS water efficiency: 4 star wels
WELS water consumption: 7L/min
WELS registration number: T45832 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: PVD
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 426mm
Height to spout: 262mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Keen on properly cold drinking water without a jug? The Peppy Taps Flagship 4 in 1 Boiling and Chilled Filtered Tap in Brushed Nickel gives you filtered boiling and filtered chilled water on top of normal hot and cold mains, from one lever mixer. Boiling runs from 75 to 98 degrees across seven settings. Chilled runs from 4 to 14 degrees across eleven, cold enough for a summer afternoon. The spring loaded boiling handle closes itself when you let go and the outlet is anti-scald. Lead free brass, 35mm cartridge, WELS 5 star at 6 litres a minute. The box holds the mixer, boiler unit, chiller unit, Everpure filter and instructions. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Matte Black, Gunmetal and Brushed Brass.

• Instant filtered boiling with 7 settings between 75 and 98 degrees, so the kettle can go
• Instant filtered chilled water with 11 settings between 4 and 14 degrees, dialled in as cold as you like it
• Spring loaded boiling handle and anti-scald outlet, which makes boiling water safer to have within reach
• Lead free brass body under a PVD brushed nickel finish, with a 35mm cartridge
• 360 degree swivel spout at 230mm high with a 200mm reach for everyday sink work
• WELS 5 star at 6 litres a minute for the hot and cold mains side
• Mixer, boiler unit, chiller unit, filter cartridge and instructions all in the one box, with a 2 year replacement warranty on parts and labour (12 months commercial)

Fits a single tap hole sink on 150 to 500kPa pressure. Book a licensed plumber and have a power point under the bench, and allow room for two units: the carton is 75 x 38 x 41cm and 23kg.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T41540 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: PVD
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 397mm
Height to spout: 230mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Looking for one tap that fills the pasta pot and the teapot? The Peppy Taps Signature 4 in 1 Electronic Pullout Boiling and Ambient Filtered Tap in Matte Black pairs a touch-control interface with a pull-out hose. Tap the panel for filtered boiling water, seven settings from 75 to 98 degrees, or filtered ambient water for drinking, and use the lever and hose for the ordinary jobs around the sink. The outlet is anti-scald. It stands 466mm overall, with a 230mm reach. Lead free brass, 35mm cartridge, WELS 5 star at 6 litres a minute. The box holds the pull-out mixer, under-bench boiler unit, Everpure filter and instructions. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Brushed Nickel, Gunmetal, Brushed Brass and Brushed Bronze.

• Pull-out hose on a 360 degree swivel spout for rinsing, filling and cleaning the whole sink
• Touch-control interface for filtered boiling and filtered ambient water, no handle to hold
• Boiling set between 75 and 98 degrees across 7 settings, so you can match the drink
• Anti-scald outlet for safer boiling water at the sink
• Lead free brass body with a 35mm cartridge, finished in electroplated matte black
• WELS 5 star at 6 litres a minute on the mains side
• Pull-out mixer, boiler unit, filter cartridge and instructions in the box, with a 2 year replacement warranty on parts and labour (12 months commercial)

Single tap hole, 150 to 500kPa. Allow 466mm of height above the bench, hose clearance below it, a power point under the bench and a licensed plumber; the carton is 43 x 37 x 64cm.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T45836 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: Electroplated
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 466mm
Height to spout: 266mm
Spout reach: 230mm
Spout function: Pullout
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Tired of waiting on the kettle and the fridge? The Peppy Taps Flagship 4 in 1 Boiling and Chilled Filtered Tap in Matte Black gives you filtered boiling and filtered chilled water on top of normal hot and cold mains, from one lever mixer. Boiling runs from 75 to 98 degrees across seven settings. Chilled runs from 4 to 14 degrees across eleven, cold enough for a summer afternoon. The spring loaded boiling handle closes itself when you let go and the outlet is anti-scald. Lead free brass, 35mm cartridge, WELS 5 star at 6 litres a minute. The box holds the mixer, boiler unit, chiller unit, Everpure filter and instructions. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Brushed Nickel, Gunmetal and Brushed Brass.

• Instant filtered boiling with 7 settings between 75 and 98 degrees, so the kettle can go
• Instant filtered chilled water with 11 settings between 4 and 14 degrees, dialled in as cold as you like it
• Spring loaded boiling handle and anti-scald outlet, which makes boiling water safer to have within reach
• Lead free brass body under an electroplated matte black finish, with a 35mm cartridge
• 360 degree swivel spout at 230mm high with a 200mm reach for everyday sink work
• WELS 5 star at 6 litres a minute for the hot and cold mains side
• Mixer, boiler unit, chiller unit, filter cartridge and instructions all in the one box, with a 2 year replacement warranty on parts and labour (12 months commercial)

Fits a single tap hole sink on 150 to 500kPa pressure. Book a licensed plumber and have a power point under the bench, and allow room for two units: the carton is 75 x 38 x 41cm and 23kg.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T41540 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: Electroplated
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 397mm
Height to spout: 230mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Need to rinse the far corner of the sink and fill the teapot too? The Peppy Taps Flagship 4 in 1 Pullout Boiling and Ambient Filtered Tap in Chrome pairs a pull-out hose that rinses and reaches like a normal pull-out mixer with filtered boiling and ambient water. Boiling has seven settings from 75 to 98 degrees, behind a spring loaded handle that shuts when you let go, with an anti-scald outlet. The spout swivels 360 degrees and reaches 230mm. Lead free brass, 35mm cartridge, WELS 5 star at 6 litres a minute. The pull-out mixer, under-bench boiler unit, Everpure filter cartridge and instructions come in the box. Backed by a 2 year replacement warranty on parts and labour. Also available in Matte Black, Brushed Nickel, Gunmetal and Brushed Brass.

• Pull-out hose on a 360 degree swivel spout, so you can rinse the sink, fill a stock pot on the bench or wash down the drainer
• Filtered boiling on tap with 7 settings from 75 to 98 degrees, which covers green tea through to a rolling boil
• Filtered ambient water for drinking, straight from the same outlet
• Spring loaded boiling handle and anti-scald outlet for safer use around the family
• Lead free brass body in an electroplated chrome finish, with a 35mm cartridge
• WELS 5 star at 6 litres a minute on the mains side
• Whole kit in the box: pull-out mixer, boiler unit, filter cartridge and instructions, with a 2 year replacement warranty on parts and labour (12 months commercial)

Single tap hole, 150 to 500kPa. Needs a licensed plumber, a power point under the bench and clearance for the hose weight as well as the boiler unit; the carton is 75 x 38 x 41cm.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T44947 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: Electroplated
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 400mm
Height to spout: 200mm
Spout reach: 230mm
Spout function: Pullout
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

After a boiling water tap that still works like a proper kitchen mixer? The Peppy Taps Flagship 4 in 1 Pullout Boiling and Ambient Filtered Tap in Brushed Nickel pairs a pull-out hose that rinses and reaches like a normal pull-out mixer with filtered boiling and ambient water. Boiling has seven settings from 75 to 98 degrees, behind a spring loaded handle that shuts when you let go, with an anti-scald outlet. The spout swivels 360 degrees and reaches 230mm. Lead free brass, 35mm cartridge, WELS 5 star at 6 litres a minute. The pull-out mixer, under-bench boiler unit, Everpure filter cartridge and instructions come in the box. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Matte Black, Gunmetal and Brushed Brass.

• Pull-out hose on a 360 degree swivel spout, so you can rinse the sink, fill a stock pot on the bench or wash down the drainer
• Filtered boiling on tap with 7 settings from 75 to 98 degrees, which covers green tea through to a rolling boil
• Filtered ambient water for drinking, straight from the same outlet
• Spring loaded boiling handle and anti-scald outlet for safer use around the family
• Lead free brass body in a PVD brushed nickel finish, with a 35mm cartridge
• WELS 5 star at 6 litres a minute on the mains side
• Whole kit in the box: pull-out mixer, boiler unit, filter cartridge and instructions, with a 2 year replacement warranty on parts and labour (12 months commercial)

Single tap hole, 150 to 500kPa. Needs a licensed plumber, a power point under the bench and clearance for the hose weight as well as the boiler unit; the carton is 75 x 38 x 41cm.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T44947 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: PVD
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 400mm
Height to spout: 200mm
Spout reach: 230mm
Spout function: Pullout
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Fitting out a new kitchen and sick of bench clutter? The Peppy Taps Signature 4 in 1 Electronic Boiling and Ambient Filtered Tap in Brushed Bronze runs filtered boiling and ambient water from a touch-control interface. Tap to call up filtered boiling water, set from 75 to 98 degrees across seven settings, or filtered room-temperature water for the glass, while the lever handles normal hot and cold mains. The outlet is anti-scald. It stands 426mm overall, with 262mm to the swivel spout. Lead free brass, 35mm cartridge, WELS 4 star at 7 litres a minute. Mixer, under-bench boiler unit, Everpure filter cartridge and instructions all come in the box. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Matte Black, Brushed Nickel, Gunmetal and Brushed Brass.

• Touch-control interface for boiling and ambient water, so there's no handle to hold down
• Filtered boiling with 7 settings from 75 to 98 degrees, ready the moment you want it
• Filtered ambient water from the same spout for drinking and cooking
• Anti-scald outlet, which keeps boiling water safer at the sink
• Lead free brass body in a PVD brushed bronze finish, with a 35mm cartridge on the mains side
• Tall profile at 262mm to the spout with a 200mm reach, handy under a window or over a deep sink
• Mixer, boiler unit, filter cartridge and instructions in the box, with a 2 year replacement warranty on parts and labour (12 months commercial)

Single tap hole, 150 to 500kPa water pressure. The touch controls and boiler both need power, so have a power point under the bench and a licensed plumber for the install; the carton is 43 x 37 x 64cm.

Specifications

WELS water efficiency: 4 star wels
WELS water consumption: 7L/min
WELS registration number: T45832 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: PVD
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 426mm
Height to spout: 262mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Tired of waiting on the kettle and the fridge? The Peppy Taps Flagship 4 in 1 Boiling and Chilled Filtered Tap in Brushed Brass gives you filtered boiling and filtered chilled water on top of normal hot and cold mains, from one lever mixer. Boiling runs from 75 to 98 degrees across seven settings. Chilled runs from 4 to 14 degrees across eleven, cold enough for a summer afternoon. The spring loaded boiling handle closes itself when you let go and the outlet is anti-scald. Lead free brass, 35mm cartridge, WELS 5 star at 6 litres a minute. The box holds the mixer, boiler unit, chiller unit, Everpure filter and instructions. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Matte Black, Brushed Nickel and Gunmetal.

• Instant filtered boiling with 7 settings between 75 and 98 degrees, so the kettle can go
• Instant filtered chilled water with 11 settings between 4 and 14 degrees, dialled in as cold as you like it
• Spring loaded boiling handle and anti-scald outlet, which makes boiling water safer to have within reach
• Lead free brass body under a PVD brushed brass finish, with a 35mm cartridge
• 360 degree swivel spout at 230mm high with a 200mm reach for everyday sink work
• WELS 5 star at 6 litres a minute for the hot and cold mains side
• Mixer, boiler unit, chiller unit, filter cartridge and instructions all in the one box, with a 2 year replacement warranty on parts and labour (12 months commercial)

Fits a single tap hole sink on 150 to 500kPa pressure. Book a licensed plumber and have a power point under the bench, and allow room for two units: the carton is 75 x 38 x 41cm and 23kg.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T41540 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: PVD
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 397mm
Height to spout: 230mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Boiling for the teapot and cold for the water bottle, from one tap? The Peppy Taps Flagship 4 in 1 Boiling and Chilled Filtered Tap in Chrome gives you filtered boiling and filtered chilled water on top of normal hot and cold mains, from one lever mixer. Boiling runs from 75 to 98 degrees across seven settings. Chilled runs from 4 to 14 degrees across eleven, cold enough for a summer afternoon. The spring loaded boiling handle closes itself when you let go and the outlet is anti-scald. Lead free brass, 35mm cartridge, WELS 5 star at 6 litres a minute. The box holds the mixer, boiler unit, chiller unit, Everpure filter and instructions. Backed by a 2 year replacement warranty on parts and labour. Also available in Matte Black, Brushed Nickel, Gunmetal and Brushed Brass.

• Instant filtered boiling with 7 settings between 75 and 98 degrees, so the kettle can go
• Instant filtered chilled water with 11 settings between 4 and 14 degrees, dialled in as cold as you like it
• Spring loaded boiling handle and anti-scald outlet, which makes boiling water safer to have within reach
• Lead free brass body under an electroplated chrome finish, with a 35mm cartridge
• 360 degree swivel spout at 230mm high with a 200mm reach for everyday sink work
• WELS 5 star at 6 litres a minute for the hot and cold mains side
• Mixer, boiler unit, chiller unit, filter cartridge and instructions all in the one box, with a 2 year replacement warranty on parts and labour (12 months commercial)

Fits a single tap hole sink on 150 to 500kPa pressure. Book a licensed plumber and have a power point under the bench, and allow room for two units: the carton is 75 x 38 x 41cm and 23kg.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T41540 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: Electroplated
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 397mm
Height to spout: 230mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Want boiling water at the touch of a panel? The Peppy Taps Signature 4 in 1 Electronic Boiling and Ambient Filtered Tap in Chrome runs filtered boiling and ambient water from a touch-control interface. Tap to call up filtered boiling water, set from 75 to 98 degrees across seven settings, or filtered room-temperature water for the glass, while the lever handles normal hot and cold mains. The outlet is anti-scald. It stands 426mm overall, with 262mm to the swivel spout. Lead free brass, 35mm cartridge, WELS 4 star at 7 litres a minute. Mixer, under-bench boiler unit, Everpure filter cartridge and instructions all come in the box. Backed by a 2 year replacement warranty on parts and labour. Also available in Matte Black, Brushed Nickel, Gunmetal, Brushed Brass and Brushed Bronze.

• Touch-control interface for boiling and ambient water, so there's no handle to hold down
• Filtered boiling with 7 settings from 75 to 98 degrees, ready the moment you want it
• Filtered ambient water from the same spout for drinking and cooking
• Anti-scald outlet, which keeps boiling water safer at the sink
• Lead free brass body in an electroplated chrome finish, with a 35mm cartridge on the mains side
• Tall profile at 262mm to the spout with a 200mm reach, handy under a window or over a deep sink
• Mixer, boiler unit, filter cartridge and instructions in the box, with a 2 year replacement warranty on parts and labour (12 months commercial)

Single tap hole, 150 to 500kPa water pressure. The touch controls and boiler both need power, so have a power point under the bench and a licensed plumber for the install; the carton is 43 x 37 x 64cm.

Specifications

WELS water efficiency: 4 star wels
WELS water consumption: 7L/min
WELS registration number: T45832 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: Electroplated
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 426mm
Height to spout: 262mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Ready to retire the kettle? The Peppy Taps Flagship 4 in 1 Boiling and Ambient Filtered Tap in Gunmetal does the job of your kettle and your sink mixer in one unit. You get filtered boiling water on demand, with seven settings from 75 to 98 degrees, filtered room-temperature water for drinking, and normal hot and cold mains from the lever. The boiling handle is spring loaded, so it shuts the second you let go, and the outlet is anti-scald. Lead free brass body, 35mm cartridge, WELS 5 star at 6 litres a minute. The mixer, under-bench boiler unit, Everpure filter cartridge and instructions are all in the box. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Matte Black, Brushed Nickel and Brushed Brass.

• Filtered boiling water straight away, with 7 temperature settings from 75 to 98 degrees for tea, coffee or a pot of pasta
• Filtered ambient water from the same spout, so you can skip the jug in the fridge door
• Spring loaded boiling handle that closes as soon as you release it, plus an anti-scald outlet for peace of mind with kids around
• PVD finish in gunmetal over a lead free brass body, with a 35mm cartridge for smooth everyday control
• 360 degree swivel spout, 230mm to the spout with a 200mm reach, which clears most sinks
• WELS 5 star at 6 litres a minute on the mains side, so the day-to-day running stays efficient
• Complete kit in the box: mixer, boiler unit, filter cartridge and instructions, with a 2 year replacement warranty on parts and labour (12 months commercial)

Suits a single tap hole sink with 150 to 500kPa water pressure. You'll need a licensed plumber and a power point under the bench, plus space for the boiler unit, which ships in a 36 x 35 x 62cm carton.

Replacement Everpure 2CB5-S filter cartridges are sold separately.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T41540 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: PVD
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 397mm
Height to spout: 230mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Big sink, big pots and a kettle you'd rather not own? The Peppy Taps Flagship 4 in 1 Pullout Boiling and Ambient Filtered Tap in Matte Black pairs a pull-out hose that rinses and reaches like a normal pull-out mixer with filtered boiling and ambient water. Boiling has seven settings from 75 to 98 degrees, behind a spring loaded handle that shuts when you let go, with an anti-scald outlet. The spout swivels 360 degrees and reaches 230mm. Lead free brass, 35mm cartridge, WELS 5 star at 6 litres a minute. The pull-out mixer, under-bench boiler unit, Everpure filter cartridge and instructions come in the box. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Brushed Nickel, Gunmetal and Brushed Brass.

• Pull-out hose on a 360 degree swivel spout, so you can rinse the sink, fill a stock pot on the bench or wash down the drainer
• Filtered boiling on tap with 7 settings from 75 to 98 degrees, which covers green tea through to a rolling boil
• Filtered ambient water for drinking, straight from the same outlet
• Spring loaded boiling handle and anti-scald outlet for safer use around the family
• Lead free brass body in an electroplated matte black finish, with a 35mm cartridge
• WELS 5 star at 6 litres a minute on the mains side
• Whole kit in the box: pull-out mixer, boiler unit, filter cartridge and instructions, with a 2 year replacement warranty on parts and labour (12 months commercial)

Single tap hole, 150 to 500kPa. Needs a licensed plumber, a power point under the bench and clearance for the hose weight as well as the boiler unit; the carton is 75 x 38 x 41cm.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T44947 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: Electroplated
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 400mm
Height to spout: 200mm
Spout reach: 230mm
Spout function: Pullout
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Replacing the kitchen mixer anyway? The Peppy Taps Flagship 4 in 1 Boiling and Ambient Filtered Tap in Brushed Nickel does the job of your kettle and your sink mixer in one unit. You get filtered boiling water on demand, with seven settings from 75 to 98 degrees, filtered room-temperature water for drinking, and normal hot and cold mains from the lever. The boiling handle is spring loaded, so it shuts the second you let go, and the outlet is anti-scald. Lead free brass body, 35mm cartridge, WELS 5 star at 6 litres a minute. The mixer, under-bench boiler unit, Everpure filter cartridge and instructions are all in the box. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Matte Black, Gunmetal and Brushed Brass.

• Filtered boiling water straight away, with 7 temperature settings from 75 to 98 degrees for tea, coffee or a pot of pasta
• Filtered ambient water from the same spout, so you can skip the jug in the fridge door
• Spring loaded boiling handle that closes as soon as you release it, plus an anti-scald outlet for peace of mind with kids around
• PVD finish in brushed nickel over a lead free brass body, with a 35mm cartridge for smooth everyday control
• 360 degree swivel spout, 230mm to the spout with a 200mm reach, which clears most sinks
• WELS 5 star at 6 litres a minute on the mains side, so the day-to-day running stays efficient
• Complete kit in the box: mixer, boiler unit, filter cartridge and instructions, with a 2 year replacement warranty on parts and labour (12 months commercial)

Suits a single tap hole sink with 150 to 500kPa water pressure. You'll need a licensed plumber and a power point under the bench, plus space for the boiler unit, which ships in a 36 x 35 x 62cm carton.

Replacement Everpure 2CB5-S filter cartridges are sold separately.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T41540 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: PVD
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 397mm
Height to spout: 230mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Boiling for the teapot and cold for the water bottle, from one tap? The Peppy Taps Flagship 4 in 1 Boiling and Chilled Filtered Tap in Gunmetal gives you filtered boiling and filtered chilled water on top of normal hot and cold mains, from one lever mixer. Boiling runs from 75 to 98 degrees across seven settings. Chilled runs from 4 to 14 degrees across eleven, cold enough for a summer afternoon. The spring loaded boiling handle closes itself when you let go and the outlet is anti-scald. Lead free brass, 35mm cartridge, WELS 5 star at 6 litres a minute. The box holds the mixer, boiler unit, chiller unit, Everpure filter and instructions. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Matte Black, Brushed Nickel and Brushed Brass.

• Instant filtered boiling with 7 settings between 75 and 98 degrees, so the kettle can go
• Instant filtered chilled water with 11 settings between 4 and 14 degrees, dialled in as cold as you like it
• Spring loaded boiling handle and anti-scald outlet, which makes boiling water safer to have within reach
• Lead free brass body under a PVD gunmetal finish, with a 35mm cartridge
• 360 degree swivel spout at 230mm high with a 200mm reach for everyday sink work
• WELS 5 star at 6 litres a minute for the hot and cold mains side
• Mixer, boiler unit, chiller unit, filter cartridge and instructions all in the one box, with a 2 year replacement warranty on parts and labour (12 months commercial)

Fits a single tap hole sink on 150 to 500kPa pressure. Book a licensed plumber and have a power point under the bench, and allow room for two units: the carton is 75 x 38 x 41cm and 23kg.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T41540 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: PVD
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 397mm
Height to spout: 230mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Ready to retire the kettle? The Peppy Taps Flagship 4 in 1 Boiling and Ambient Filtered Tap in Chrome does the job of your kettle and your sink mixer in one unit. You get filtered boiling water on demand, with seven settings from 75 to 98 degrees, filtered room-temperature water for drinking, and normal hot and cold mains from the lever. The boiling handle is spring loaded, so it shuts the second you let go, and the outlet is anti-scald. Lead free brass body, 35mm cartridge, WELS 5 star at 6 litres a minute. The mixer, under-bench boiler unit, Everpure filter cartridge and instructions are all in the box. Backed by a 2 year replacement warranty on parts and labour. Also available in Matte Black, Brushed Nickel, Gunmetal and Brushed Brass.

• Filtered boiling water straight away, with 7 temperature settings from 75 to 98 degrees for tea, coffee or a pot of pasta
• Filtered ambient water from the same spout, so you can skip the jug in the fridge door
• Spring loaded boiling handle that closes as soon as you release it, plus an anti-scald outlet for peace of mind with kids around
• Electroplated finish in chrome over a lead free brass body, with a 35mm cartridge for smooth everyday control
• 360 degree swivel spout, 230mm to the spout with a 200mm reach, which clears most sinks
• WELS 5 star at 6 litres a minute on the mains side, so the day-to-day running stays efficient
• Complete kit in the box: mixer, boiler unit, filter cartridge and instructions, with a 2 year replacement warranty on parts and labour (12 months commercial)

Suits a single tap hole sink with 150 to 500kPa water pressure. You'll need a licensed plumber and a power point under the bench, plus space for the boiler unit, which ships in a 36 x 35 x 62cm carton.

Replacement Everpure 2CB5-S filter cartridges are sold separately.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T41540 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: Electroplated
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 397mm
Height to spout: 230mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Want boiling water the moment you pull a handle? The Peppy Taps Flagship 4 in 1 Boiling and Ambient Filtered Tap in Matte Black does the job of your kettle and your sink mixer in one unit. You get filtered boiling water on demand, with seven settings from 75 to 98 degrees, filtered room-temperature water for drinking, and normal hot and cold mains from the lever. The boiling handle is spring loaded, so it shuts the second you let go, and the outlet is anti-scald. Lead free brass body, 35mm cartridge, WELS 5 star at 6 litres a minute. The mixer, under-bench boiler unit, Everpure filter cartridge and instructions are all in the box. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Brushed Nickel, Gunmetal and Brushed Brass.

• Filtered boiling water straight away, with 7 temperature settings from 75 to 98 degrees for tea, coffee or a pot of pasta
• Filtered ambient water from the same spout, so you can skip the jug in the fridge door
• Spring loaded boiling handle that closes as soon as you release it, plus an anti-scald outlet for peace of mind with kids around
• Electroplated finish in matte black over a lead free brass body, with a 35mm cartridge for smooth everyday control
• 360 degree swivel spout, 230mm to the spout with a 200mm reach, which clears most sinks
• WELS 5 star at 6 litres a minute on the mains side, so the day-to-day running stays efficient
• Complete kit in the box: mixer, boiler unit, filter cartridge and instructions, with a 2 year replacement warranty on parts and labour (12 months commercial)

Suits a single tap hole sink with 150 to 500kPa water pressure. You'll need a licensed plumber and a power point under the bench, plus space for the boiler unit, which ships in a 36 x 35 x 62cm carton.

Replacement Everpure 2CB5-S filter cartridges are sold separately.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T41540 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: Electroplated
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 397mm
Height to spout: 230mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Want boiling water the moment you pull a handle? The Peppy Taps Flagship 4 in 1 Boiling and Ambient Filtered Tap in Brushed Brass does the job of your kettle and your sink mixer in one unit. You get filtered boiling water on demand, with seven settings from 75 to 98 degrees, filtered room-temperature water for drinking, and normal hot and cold mains from the lever. The boiling handle is spring loaded, so it shuts the second you let go, and the outlet is anti-scald. Lead free brass body, 35mm cartridge, WELS 5 star at 6 litres a minute. The mixer, under-bench boiler unit, Everpure filter cartridge and instructions are all in the box. Backed by a 2 year replacement warranty on parts and labour. Also available in Chrome, Matte Black, Brushed Nickel and Gunmetal.

• Filtered boiling water straight away, with 7 temperature settings from 75 to 98 degrees for tea, coffee or a pot of pasta
• Filtered ambient water from the same spout, so you can skip the jug in the fridge door
• Spring loaded boiling handle that closes as soon as you release it, plus an anti-scald outlet for peace of mind with kids around
• PVD finish in brushed brass over a lead free brass body, with a 35mm cartridge for smooth everyday control
• 360 degree swivel spout, 230mm to the spout with a 200mm reach, which clears most sinks
• WELS 5 star at 6 litres a minute on the mains side, so the day-to-day running stays efficient
• Complete kit in the box: mixer, boiler unit, filter cartridge and instructions, with a 2 year replacement warranty on parts and labour (12 months commercial)

Suits a single tap hole sink with 150 to 500kPa water pressure. You'll need a licensed plumber and a power point under the bench, plus space for the boiler unit, which ships in a 36 x 35 x 62cm carton.

Replacement Everpure 2CB5-S filter cartridges are sold separately.

Specifications

WELS water efficiency: 5 star wels
WELS water consumption: 6L/min
WELS registration number: T41540 (WELS licence 1998)
Watermark certification: WMKA26680
Construction material: Lead free brass
Finish/coating: PVD
Operating mechanism: 35mm Cartridge
Operating pressure: 150 to 500kPa
Overall height: 397mm
Height to spout: 230mm
Spout reach: 200mm
Spout function: Fixed
Warranty: 2 years replacement, parts & labour; 12 months commercial

What's In The Box

Warranty

Peppy Taps are covered by a 2 year replacement warranty*

Peppy Taps filtered boiling, chilled and sparkling water taps are built for everyday use in the home kitchen. In addition to your rights under the Australian Consumer Law, Peppy Taps offers an extended warranty against defects in materials and workmanship from the date of purchase. If a covered fault appears within the warranty period, Peppy Taps will repair or replace the faulty product or component.

Filtered Water Taps

• Domestic use, parts and labour: 2 Years
• Commercial use, parts and labour: 12 Months

Keeping your warranty valid

• The filter cartridge must be replaced every 12 months to keep the warranty on the boiler, chiller and soda units. Keep proof of purchase for each replacement filter.
• Only the specified Peppy Taps filter cartridge can be used with the system.
• The tap must be connected to mains water. Use with tank water voids the warranty.
• Installation must be carried out by a licensed plumber, with a power point fitted by a licensed electrician under the bench.

The warranty does not cover fair wear and tear, scale build-up, damage from harsh or abrasive cleaners, or incorrect installation or use. Proof of purchase is required for all claims.

For warranty enquiries, contact us with your order number and a photo or short video of the fault and we will arrange the claim with Peppy Taps for you.

Nowhere to hang the towel by the shower? The Caroma Elegance Robe Hook in Chrome is a small metal hook, 50mm each way, with the soft curve of the rest of the Elegance accessories. It's the kind of thing you forget until you're dripping on the floor with the towel across the room. The polished chrome finish holds its shine, and the metal body is tested for strength, so a wet towel or heavy robe won't bend it. Dual fixings hold it firm to the wall, which matters when kids swing off it. The hook and the technical manual are in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 50mm by 50mm by 50mm, a compact hook for behind a door or beside the shower
• Metal construction tested for strength, so it holds a heavy wet towel
• Polished chrome finish that resists tarnish and wipes clean
• Dual fixings for a firm hold on the wall
• Curved shape that matches the Elegance tapware and accessories
• 20 year warranty (see the Caroma warranty document for what is covered)

Screw fixed to a wall or door. Use wall plugs in plasterboard or tiles, and avoid fixing to grout lines.

Match it with the Elegance Lever Basin Set and Elegance Sink Mixer in Chrome.

Specifications

Construction material: Metal
Finish/coating: Chrome
Dimensions: 50 x 50 x 50 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a steady hold getting up from the toilet? The Caroma Urbane II Universal Rail and Toilet Roll Holder Set in Gunmetal is a 400mm grab rail that holds the toilet roll. Beside the toilet that's exactly where a hand lands when someone pushes up to stand, and this rail is engineered to withstand up to 110kg where a regular roll holder would rip out of the plasterboard. It's die cast zinc, 400mm wide, 80mm deep and 30mm high, with hidden accessory mounting points, so it reads as a tidy piece of bathroom hardware. Australian designed and engineered. The rail and the toilet roll holder attachment come together. Backed by a 20 year warranty (see the Caroma warranty document for what is covered).

• 400mm rail with a toilet roll holder attachment, so there's a safe hold where you need it
• Secure mounting engineered to withstand up to 110kg
• Gunmetal die cast zinc that matches the Urbane II hand shower and towel rail set
• Hidden accessory mounting points for a clean look with no visible fixings
• Australian designed and engineered
• Rail and roll holder attachment both in the box
• 20 year warranty (see the Caroma warranty document for what is covered)

Mount into solid timber or a reinforced wall to get the full 110kg rating; ask your builder or plumber to check the wall.

Add the Urbane II Universal Towel Rail 400mm Set in Gunmetal by the basin.

Specifications

Construction material: Die-cast zinc
Finish/coating: Gunmetal
Dimensions: 400 x 80 x 30 mm (W x D x H)
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a towel rail that'll hold your weight if you slip? The Caroma Urbane II Universal Towel Rail 400mm Set in Brushed Nickel is a 400mm grab rail with a towel attachment, so it hangs the hand towel and gives you a secure hold at the same time. The mounting is engineered to take up to 110kg, which an ordinary towel rail is not. It's die cast zinc, 400mm wide and 80mm deep, with hidden accessory mounting points, so you see the rail and not the hardware. Australian designed and engineered. The rail and towel attachment come together in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Also available in Chrome and Gunmetal.

• 400mm rail with a towel attachment, so one fitting does two jobs
• Mounting engineered to withstand up to 110kg, for a safe hold by the basin or bath
• Die cast zinc in a brushed nickel finish that matches the Urbane II collection
• Hidden accessory mounting points, so no visible brackets or screws
• Australian designed and engineered
• Rail and towel attachment both in the box
• 20 year warranty (see the Caroma warranty document for what is covered)

Fix into solid framing or a reinforced wall to get the full load rating; ask your builder or plumber to check first.

The Urbane II Universal Rail and Toilet Roll Holder Set gives you the same hold beside the toilet.

Specifications

Construction material: Die-cast zinc
Finish/coating: Brushed Nickel
Dimensions: 400 x 80 x 30 mm (W x D x H)
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a shower rail you can actually lean on? The Caroma Opal Support Shower Rail 90 Degree in Chrome is a load bearing L shaped rail, 1230mm by 480mm, that holds your hand shower on a slider and gives you a solid grip on both the vertical and the horizontal. It's reversible, so it fits left or right handed layouts. The rail is 32mm brass in polished chrome, built to withstand 1100N, around 110kg, so it's a true support rail rather than a shower rail dressed up. The chrome slider, rail mounts with grub screws, drilling templates and warranty card are in the box. Shower head, hose and elbow are not included. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 90 degree rail, 1230mm by 480mm, for a hold on the vertical and the horizontal
• Load bearing to 1100N, around 110kg, so it does the job of a grab rail
• Reversible for left or right hand installation
• 32mm brass construction in polished chrome, which looks like regular bathroom hardware
• Chrome shower slider included for your hand shower
• Drilling templates and rail mounts in the box to make the install cleaner
• 20 year warranty (see the Caroma warranty document for what is covered)

Hand shower, hose and wall elbow are sold separately. Fix into solid framing or a reinforced wall; your plumber or builder should check first.

Add the Caroma Urbane II hand shower handset to complete it, or see the Opal Support Straight 900mm if you only need a vertical rail.

Specifications

Construction material: Brass
Finish/coating: Chrome
Dimensions: 32 x 430 x 1217 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing a bath in a standard 1700 alcove? The Caroma Newbury 1675mm Bath 280L in White is a straightforward acrylic bath for a back to wall install. At 1675mm long it suits the common alcove size, and it holds 280 litres, enough for a proper soak or a couple of kids at bath time. Acrylic is warm to the touch, lighter than steel to carry upstairs, and easy to clean with a non abrasive product. There's an overflow fitted, which is one less thing to worry about with children. Note that the waste kit is not in the box, so you'll need to buy the plug and waste separately. Made in China.

• 1675mm long, so it drops into a standard family bathroom alcove
• 280 litre capacity for a deep, comfortable soak
• Acrylic shell that holds heat and feels warmer than steel
• Overflow fitted to catch a forgotten tap
• Back to wall design for a tiled or panelled front
• Waste kit not included, so order a matching bath waste at the same time

Measure your alcove length and the waste position before you buy, and have your plumber check the floor is level and supported.

Pair it with the Elegance II Bath Outlet 180mm and wall top assemblies for the bath taps.

Specifications

Construction material: Acrylic
Finish/coating: White
Dimensions: 1670 x 760 x 478 mm (W x D x H)
Country of origin: China
Warranty: 20 years bath shell, 1 year labour (see Caroma warranty document)
Capacity: 280 litres

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fitting a grab rail by the bath without it looking like one? The Caroma Urbane II Universal Towel Rail 400mm Set in Chrome is a 400mm grab rail with a towel attachment, so it hangs the hand towel and gives you a secure hold at the same time. The mounting is engineered to take up to 110kg, which an ordinary towel rail is not. It's die cast zinc, 400mm wide and 80mm deep, with hidden accessory mounting points, so you see the rail and not the hardware. Australian designed and engineered. The rail and towel attachment come together in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Also available in Brushed Nickel and Gunmetal.

• 400mm rail with a towel attachment, so one fitting does two jobs
• Mounting engineered to withstand up to 110kg, for a safe hold by the basin or bath
• Die cast zinc in a chrome finish that matches the Urbane II collection
• Hidden accessory mounting points, so no visible brackets or screws
• Australian designed and engineered
• Rail and towel attachment both in the box
• 20 year warranty (see the Caroma warranty document for what is covered)

Fix into solid framing or a reinforced wall to get the full load rating; ask your builder or plumber to check first.

The Urbane II Universal Rail and Toilet Roll Holder Set gives you the same hold beside the toilet.

Specifications

Construction material: Die-cast zinc
Finish/coating: Chrome
Dimensions: 400 x 80 x 30 mm (W x D x H)
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Towel rail pulled out of the wall again? The Caroma Urbane II Universal Towel Rail 400mm Set in Gunmetal is a 400mm grab rail with a towel attachment, so it hangs the hand towel and gives you a secure hold at the same time. The mounting is engineered to take up to 110kg, which an ordinary towel rail is not. It's die cast zinc, 400mm wide and 80mm deep, with hidden accessory mounting points, so you see the rail and not the hardware. Australian designed and engineered. The rail and towel attachment come together in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Also available in Brushed Nickel and Chrome.

• 400mm rail with a towel attachment, so one fitting does two jobs
• Mounting engineered to withstand up to 110kg, for a safe hold by the basin or bath
• Die cast zinc in a gunmetal finish that matches the Urbane II collection
• Hidden accessory mounting points, so no visible brackets or screws
• Australian designed and engineered
• Rail and towel attachment both in the box
• 20 year warranty (see the Caroma warranty document for what is covered)

Fix into solid framing or a reinforced wall to get the full load rating; ask your builder or plumber to check first.

The Urbane II Universal Rail and Toilet Roll Holder Set gives you the same hold beside the toilet.

Specifications

Construction material: Die-cast zinc
Finish/coating: Gunmetal
Dimensions: 400 x 80 x 30 mm (W x D x H)
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a grab rail that blends into a white bathroom? The Caroma HomeCare Conventional Grab Rail 600 Straight in White is a 600mm straight rail for anyone who wants a safe hold in the bathroom. The white powder coat sits quietly against white tiles, so it doesn't shout hospital. Underneath it's 304 stainless steel, 32mm in diameter, with 75mm concealed clam flanges that hide the screws. It's built to withstand a 1100N load and made to comply with the grab rail requirements of AS 1428.1-2021, so it's the same standard used in access bathrooms. The technical manual is in the box. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 600mm straight rail, a handy length beside a toilet or at a shower entry
• 32mm 304 stainless steel core, so it won't rust in a wet room
• White powder coat finish that blends in with white tiles and fittings
• 75mm concealed clam flanges that hide the fixings
• Rated to withstand 1100N, built to AS 1428.1-2021 grab rail requirements
• Suits home and health care use
• 20 year warranty (see the Caroma warranty document for what is covered)

Must be fixed into solid framing, noggins or a reinforced wall. Ask your builder or plumber to check the wall before drilling.

Need more reach? The HomeCare 900 Straight is the longer version in the same finish.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: White
Dimensions: 600 x 60 x 60 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Towel rail rusting through the chrome? The Caroma Cosmo Metal Single Towel Rail 930mm in Matte Black is a single bar across 930mm of wall, wide enough to spread a bath sheet out flat so it dries by morning. The rail is metal with a matte black finish, with the same soft rounded look as the rest of the Cosmo accessories. Dual fixings at each end hold it firm when a towel is yanked off in a hurry. It suits plastered and tiled bathrooms, and the fixing kit comes in the box: two mounting plates, screws, plastic wall plugs and slotted fixing screws, plus the warranty card. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 930mm single rail, long enough to spread a bath sheet flat
• Metal construction with a matte black finish
• Dual fixings for added strength when towels are pulled off
• Smooth, rounded Cosmo lines that suit a modern bathroom
• Suits plastered and tiled bathrooms, fixing kit and wall plugs included
• 20 year warranty (see the Caroma warranty document for what is covered)

Check you have 930mm of clear wall and fix into studs where you can; ask your builder if the wall is unusual.

Pair it with the Cosmo Double Towel Rail 930mm or the Urbane II hand shower in Matte Black.

Specifications

Construction material: Metal
Finish/coating: Matte Black
Dimensions: 77 x 77 x 45 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Shower rail flimsy and the handset keeps slipping? The Caroma Opal Support Shower Rail Straight 900mm in Chrome looks like an ordinary slide rail but is built as a load bearing support rail: 32mm brass, polished chrome, constructed to withstand 1100N, which is around 110kg. That means if someone slips and grabs it, it holds. The chrome slider carries your existing hand shower up and down the 900mm length. Rail mounts with grub screws, drilling templates and a warranty card are in the box. The shower head, hose and wall elbow aren't in the box, so you can keep your current ones or choose new. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 900mm straight rail that doubles as a vertical grab rail
• Built to withstand 1100N, around 110kg, so it's safe to lean on
• 32mm brass in polished chrome, which blends in with standard tapware
• Chrome shower slider included to hold your hand shower
• Rail mounts, grub screws and drilling templates in the box
• Shower head, hose and elbow not included, so you can reuse what you have
• 20 year warranty (see the Caroma warranty document for what is covered)

Needs solid fixing into framing or a reinforced wall; have your builder or plumber check the wall before drilling.

Want a horizontal hold as well? See the Opal Support Shower Rail 90 Degree.

Specifications

Construction material: Brass
Finish/coating: Chrome
Dimensions: 32 x 75 x 840 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Two bath towels and one rail that's never dry? The Caroma Cosmo Metal Double Towel Rail 930mm in Matte Black gives you two rails, one in front of the other, across 930mm of wall, so two bath towels hang side by side and actually dry. It's metal with a matte black finish and smooth rounded lines, no sharp corners to catch a hip on. A double rail also keeps the towels off the floor and off the vanity. Caroma rates it for plastered and tiled bathrooms, and the fixing kit is in the box: two mounting plates, screws, plastic wall plugs and slotted fixing screws, along with the instructions. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 930mm wide double rail, so two bath towels dry side by side
• Metal construction under a matte black finish
• Smooth rounded lines with no sharp edges
• Suits plastered and tiled bathrooms
• Fixing kit included: mounting plates, screws, wall plugs and slotted fixing screws
• 20 year warranty (see the Caroma warranty document for what is covered)

Measure 930mm of clear wall before you order. Fix into studs or use the supplied plugs in tile or plaster, and keep clear of grout lines.

The Cosmo Single Towel Rail 930mm matches it in Matte Black.

Specifications

Construction material: Metal
Finish/coating: Matte Black
Dimensions: 140 x 140 x 45 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Wall taps over the bath or basin stiff and leaking? The Caroma Elegance II Wall Top Assemblies in Chrome are a pair of hot and cold wall taps, no spout, sold together. They're the simplest way to freshen a bath, basin or shower that runs on separate taps, without touching the plumbing behind the wall. Each tap uses a copper jumper valve, so fixing a drip means a new washer, not a new tap. The bodies are lead free brass (under 0.25% lead) that meets the new lead free WaterMark standard, with ceramic parts. Flanges, handles, retaining nuts, clips and a spanner are in the box with the technical manual. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• Hot and cold wall taps sold as a pair, with no spout, for a quick refresh
• Lead free brass under 0.25% lead, which meets the new lead free WaterMark standard
• Copper jumper valves, so a worn washer is a five minute job
• Wall flanges, handles with inserts, retaining nuts and clips in the box
• Spanner supplied, which saves your plumber a trip to the van
• Matches the Elegance II bath outlet, shower set and laundry set
• 20 year warranty (see the Caroma warranty document for what is covered)

Wall mounted. Ask your plumber to confirm they suit your existing tap bodies before ordering.

Add the Elegance II Bath Outlet 180mm for a complete bath set.

Specifications

Construction material: Brass and ceramic
Finish/coating: Chrome
Dimensions: 62 x 74 x 75 mm (W x D x H)
Watermark certification: WaterMark licence 020203
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Washing machine taps hard to turn off? The Caroma Elegance II Washing Machine Set in Chrome is a pair of hot and cold stop taps for the wall behind your washer. Being able to turn them off properly matters: a stuck stop tap is the one you can't close when a hose lets go. The bodies are lead free brass (under 0.25% lead) that meets the new lead free WaterMark standard, and they use copper jumper valves, so a drip is fixed with a washer. Tap bodies, cover plates, threaded nipples, handles, nuts, clips and a spanner all come in the box with the technical manual. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• Sold as a hot and cold pair, ready to replace the stops behind the machine
• Lead free brass under 0.25% lead, meeting the new lead free WaterMark standard
• Copper jumper valves that take a standard washer when they start to weep
• Cover plates and threaded nipples included to finish the wall neatly
• Handles with inserts and a spanner in the box
• Same look as the Elegance II laundry set, so the whole laundry matches
• 20 year warranty (see the Caroma warranty document for what is covered)

Wall mounted. Check your washing machine hoses have standard fittings and ask your plumber about the tap centres.

Pair it with the Elegance II Laundry Set over the trough.

Specifications

Construction material: Brass
Finish/coating: Chrome
Dimensions: 64 x 110 x 75 mm (W x D x H)
Watermark certification: WaterMark licence 020203
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need a longer rail along the bath or shower wall? The Caroma HomeCare Conventional Grab Rail 900 Straight in White gives you 900mm of rail, long enough to fix on an angle so there's a hold at sitting height and standing height. It's for anyone who wants a safe hold in the bathroom, and the white powder coat keeps it low key against light tiles. The rail is 304 stainless steel, 32mm in diameter, with 75mm concealed clam flanges, so no screw heads show. It's constructed to withstand 1100N and made to comply with the grab rail requirements of AS 1428.1-2009. Caroma makes the range in lengths from 300mm to 900mm, and this is the longest. Backed by a 20 year warranty (see the Caroma warranty document for what is covered). Made in China.

• 900mm straight rail that can be fixed horizontally or on an angle
• 32mm 304 stainless steel under a white powder coat
• 75mm concealed clam flanges, so the fixings stay hidden
• Constructed to withstand 1100N, built to AS 1428.1-2009 grab rail requirements
• Longest rail in the HomeCare range, for the shower wall or along a bath
• Suits home and health care use
• 20 year warranty (see the Caroma warranty document for what is covered)

Fixings need solid timber or a reinforced wall behind the tiles; get your builder to confirm before you drill.

Pair it with the HomeCare 600 Straight beside the toilet.

Specifications

Construction material: 304 Stainless Steel
Finish/coating: White
Dimensions: 900 x 60 x 78 mm (W x D x H)
Country of origin: China
Warranty: 20 years (see Caroma warranty document)

What's In The Box

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages