Bathroom Accessories

Towel rail sagging or the plating peeling off? The Raymor Projix Double Towel Rail 630mm in Black gives you two bars side by side, so two towels hang flat and dry properly instead of bunching up on one. At 630mm wide it suits most bathrooms, and the 135mm projection keeps towels off the wall. The body is zinc alloy with a black finish on brass four-point fixings, and it's rated for commercial use too. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• Two bars side by side, so a pair of towels dry properly instead of overlapping
• 630mm wide with a 135mm projection, which gives towels room to hang clear of the wall
• Zinc alloy body with a black finish that stands up to steam and daily use
• Brass four-point fixings for a rail that stays put when you tug a towel off it, at home or in commercial jobs
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with four fixing points. Find studs or use the right anchors for plasterboard, and ask your plumber or handyman if you're not sure.

Match it with Projix single towel rails, robe hooks, roll holders and pin lever tapware in the same finish.

Specifications

Construction material: Zinc
Overall length: 630 mm
Projection: 135 mm
Height: 62 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Swapping to Projix taps and want the towel rail to match? The Raymor Projix Single Towel Rail 630mm in Brushed Nickel is a straight, no-nonsense rail for one bath towel, sized to suit most family bathrooms and ensuites. It projects 75mm from the wall, enough for a towel to hang and dry without rubbing the paint. The body is zinc alloy under a brushed nickel finish, on brass four-point fixings so it doesn't wobble, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• 630mm long, which fits a standard bath towel folded in half
• 75mm projection, so towels hang clear of the wall and dry faster
• Zinc alloy body with a brushed nickel finish that wipes clean and matches Projix tapware
• Brass four-point fixings that hold firm at home or in commercial bathrooms
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with four fixing points. Screw into studs where you can, or use the right plugs for plasterboard or tiles.

Projix also does a 930mm single rail, double rails, robe hooks and roll holders in the same three finishes.

Specifications

Construction material: Zinc
Overall length: 630 mm
Projection: 75 mm
Height: 44 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Rounding off a Boston II bathroom with the small bits? The Raymor Boston II Robe Hook in Brushed Nickel gives a towel or dressing gown its own spot on the wall, and a row at different heights sorts out a family bathroom. It's a single brass hook with a rounded profile and a brushed nickel finish, 52mm wide, 60.5mm high and standing 71.5mm off the wall so a thick towel hangs without sliding off. Installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• One hook per towel or robe, handy behind the door or next to the shower screen
• Brass build with a rounded profile, which won't snag towels or rust
• Brushed nickel finish that ties in with Boston II tapware and other curved ranges
• 71.5mm projection, so a heavy bath towel stays on the hook
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed. A wall plug in tiles or plasterboard is all it needs, but check for pipes first.

Boston II also does towel rails, roll holders and hand towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 52 mm
Projection: 71.5 mm
Height: 60.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Robe hook
• Fixing Kit
• Installation Instructions

Sick of soap scum on the vanity top? The Raymor Projix Soap Holder in Brushed Nickel is a simple wall-mounted dish that keeps a bar of soap off the bench and out of the water. It's zinc die cast with a brushed nickel electroplated finish, so it won't rust in the shower and wipes clean with a cloth. The dish sits 127mm out from the wall, enough for a full size bar. A fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black.

• Wall-mounted dish, so soap drains and dries instead of turning to sludge
• Zinc die cast body that won't rust in a wet area
• Brushed nickel electroplated finish that matches Projix pin lever tapware and accessories
• 127mm projection with room for a full bar of soap
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed using the supplied kit. On tiles, drill carefully and use tile plugs. Check for pipes first.

Pair it with Projix towel rails, robe hooks, roll holders and pin lever mixers in the same finish.

Specifications

Construction material: Zinc
Overall length: 125 mm
Projection: 125 mm
Height: 43 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Soap holder
• Fixing Kit
• Installation Instructions

Refreshing the bathroom without touching the tiles? The Raymor Edge II Single Towel Rail 785mm in Brushed Nickel is the longer rail in the range, wide enough for a bath sheet or two hand towels side by side on one bar. The squared profile suits square tapware and modern vanities. Brass all the way through, with a brushed nickel finish that stands up to steam, it's 785mm wide, 24mm high and sits 71.5mm off the wall. Installation instructions are included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Chrome.

• 785mm wide, so a bath sheet or two hand towels hang flat on one bar
• Brass construction that won't bow or corrode in a steamy bathroom
• Low 24mm profile with a 71.5mm projection, keeping it neat but clear of the wall
• Brushed nickel finish to tie in with Edge II mixers and accessories
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall. Long rails need both ends anchored properly, so find studs or use tile-rated plugs, or get your plumber or handyman to fit it.

Team it with the 635mm Edge II rail, robe hooks, roll holders and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Want a brush holder fixed to the wall and off the floor? The Raymor Projix Toilet Brush & Holder in Black mounts to the wall, so the brush stays put and the floor around the pan is easy to mop. The frosted glass holder hides the brush and lifts out for a rinse, set in a zinc alloy bracket with a black finish. It's 115mm wide, 355mm high and projects 150mm, on brass four-point fixings, rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• Wall mounted, so the brush isn't kicked over and the floor stays clear for cleaning
• Frosted glass holder that hides the brush head and lifts out to rinse
• Zinc alloy bracket in a black finish to match Projix roll holders and rails
• Brass four-point fixings, rated for commercial toilets as well as home ones
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Fix it low beside the pan where the brush is handy but out of the way. Check for pipes behind the wall before drilling.

Complete the toilet with a Projix roll holder, robe hook and towel rail in the same finish.

Specifications

Construction material: Zinc
Overall length: 114 mm
Projection: 142.5 mm
Height: 370 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet brush and holder
• Fixing Kit
• Installation Instructions

After a wide double rail with square lines? The Raymor Edge II Double Towel Rail 785mm in Brushed Nickel is the longer Edge II double rail, with twin square bars stretching 785mm along the wall. Hang two bath sheets flat, or towels behind and a bath mat in front. Both bars sit 120mm from the wall so nothing sits damp against the tiles. It's solid brass throughout with a brushed nickel finish, instructions included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• 785mm long, so two bath sheets hang flat without overlapping
• Twin square bars on one set of fixings, for double the towel space
• Solid brass build with a brushed nickel finish that handles a steamy main bathroom
• 120mm projection that keeps both towels clear of the wall and each other
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long needs solid fixing at both ends, so find the studs or use good tile anchors.

Wall too short? The Edge II double rail also comes at 635mm, with single rails, hooks and roll holders to match.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Replacing a rail in a compact bathroom without giving up a second towel? The Raymor Boston II Double Towel Rail 650mm in Brushed Nickel has two round bars side by side, so a couple of bath towels hang flat and air out properly. At 650mm wide it suits an ensuite or a smaller bathroom, and the 118mm projection keeps the front towel clear of the back one. It's solid brass in a brushed nickel finish, with installation instructions in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome, and in an 850mm length.

• Two bars side by side, which gives each towel its own space to dry
• 650mm long, a good fit for an ensuite or the wall between the vanity and shower
• Solid brass rail in a brushed nickel finish that handles steam day in, day out
• 118mm projection, so the front towel doesn't press against the one behind it
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs where you can, or use the right anchors for tile and plasterboard, and ask your handyman if unsure.

Match it with Boston II single rails, robe hooks and roll holders, or go for the 850mm double rail on a wider wall.

Specifications

Construction material: Brass
Overall length: 650 mm
Projection: 118 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Refreshing the bathroom and want the rail to match round taps? The Raymor Boston II Towel Rail Single 650mm in Brushed Nickel is a straightforward single bar for one bath towel, or two hand towels side by side. The 650mm length suits an ensuite or the gap between shower screen and vanity, and it stands 72mm off the wall so the towel dries rather than sweats. It's solid brass under a brushed nickel finish. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome, and in an 850mm length.

• 650mm single bar, the right size for one bath towel or two hand towels
• Solid brass rail that won't bow under a heavy wet towel
• Brushed nickel finish on a round bar that sits well with curved tapware
• 72mm projection, so the rail hugs the wall in a tight space
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use tile anchors, and check for pipes before you drill.

Need more hanging space? Look at the Boston II double rails, or add a robe hook or two in the same finish.

Specifications

Construction material: Brass
Overall length: 650 mm
Projection: 72 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Want a shelf that lines up with square tapware? The Raymor Edge II Shelf 426mm in Brushed Nickel is a slim, squared shelf for the shower, above the basin or beside the bath. It's brass with a brushed nickel finish, so it holds up in a wet area and wipes clean. At 426mm wide and 120mm deep there's room for a couple of bottles and a bar of soap, and at 24mm high it doesn't crowd the wall. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Chrome.

• 426mm wide and 120mm deep, which takes a row of shampoo bottles
• Brass build that won't rust in the shower
• Slim 24mm profile, so it looks neat under a mirror or in a niche
• Brushed nickel finish that matches Edge II rails, hooks and tapware
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Anchor into studs or use proper tile plugs, and keep the load sensible. Ask your handyman or plumber if you're not sure.

Pair it with Edge II towel rails, the roll holder with shelf and square tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 426 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Want one rail wide enough for the whole family's towels? The Raymor Boston II Towel Rail Single 850mm in Brushed Nickel runs 850mm along the wall, wide enough for a bath sheet hung flat or three hand towels in a row. It's a single round bar in solid brass with a brushed nickel finish, sitting 72mm from the wall so it stays out of the way in a walkway. Installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome, or at 650mm for a shorter wall.

• 850mm bar that takes a full bath sheet without folding it in half
• Solid brass build, so the long span stays straight under load
• Round profile in a brushed nickel finish to match Boston II mixers and spouts
• 72mm projection that keeps the rail tight to the wall in a corridor or beside the bath
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with fixings at each end. On a span this long, aim for studs or use quality anchors in tile.

Boston II also does double rails, hand towel rails, robe hooks and roll holders in the same finish.

Specifications

Construction material: Brass
Overall length: 850 mm
Projection: 72 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Want a shelf under the mirror that matches your Projix taps? The Raymor Projix Glass Shelf 610mm in Brushed Nickel gives you a 610mm run of tempered glass shelf, 157mm deep, enough for a row of full size bottles above the basin or next to the bath. Tempered glass wipes clean and won't stain, and the zinc alloy brackets carry a brushed nickel finish to match Projix tapware. It mounts on brass four-point fixings and is rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• 610mm wide and 157mm deep, so it holds bottles, a soap dispenser and a toothbrush cup at once
• Tempered glass shelf that resists chipping and cleans with a wipe
• Zinc alloy brackets with a brushed nickel finish that match Projix taps and rails
• Brass four-point fixings, which keep the shelf level under a load of bottles
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Go into studs or use tile-rated anchors, keep the load sensible, and ask your handyman if you're unsure about the wall.

Pair it with Projix towel rails, robe hooks, roll holders and pin lever tapware.

Specifications

Construction material: Zinc
Overall length: 610 mm
Projection: 157 mm
Height: 54.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

After a wider towel rail that matches round tapware? The Raymor Boston II Double Towel Rail 850mm in Brushed Nickel is the longer of the two Boston II double rails, with twin round bars across 850mm of wall. That's room for two bath sheets hung flat, or towels and a bath mat. The bars sit 118mm out from the wall, so air gets around both. It's brass all the way through with a brushed nickel finish, and installation instructions come with the rail. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome.

• 850mm long, so two bath sheets hang flat without overlapping
• Twin bars for double the hanging space on one set of fixings
• Brass throughout in a brushed nickel finish, made to shrug off a steamy bathroom
• 118mm projection that lets air move around both towels
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long wants solid fixing, so find the studs or use good anchors in tiles.

If 850mm is too wide, the Boston II double rail also comes at 650mm, with matching single rails and hooks.

Specifications

Construction material: Brass
Overall length: 850 mm
Projection: 118 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Finishing a toilet refit and the brush is letting it down? The Raymor Projix Toilet Brush & Holder in Brushed Nickel mounts to the wall, so the brush stays put and the floor around the pan is easy to mop. The frosted glass holder hides the brush and lifts out for a rinse, set in a zinc alloy bracket with a brushed nickel finish. It's 115mm wide, 355mm high and projects 150mm, on brass four-point fixings, rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• Wall mounted, so the brush isn't kicked over and the floor stays clear for cleaning
• Frosted glass holder that hides the brush head and lifts out to rinse
• Zinc alloy bracket in a brushed nickel finish to match Projix roll holders and rails
• Brass four-point fixings, rated for commercial toilets as well as home ones
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Fix it low beside the pan where the brush is handy but out of the way. Check for pipes behind the wall before drilling.

Complete the toilet with a Projix roll holder, robe hook and towel rail in the same finish.

Specifications

Construction material: Zinc
Overall length: 115 mm
Projection: 150 mm
Height: 355 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet brush and holder
• Fixing Kit
• Installation Instructions

Need a simple, sturdy holder that takes a standard roll? The Raymor Projix Toilet Roll Holder in Brushed Nickel is a straightforward wall-mounted holder for a single roll. It's 175mm wide, 98mm high and projects 65mm, so it sits close to the wall and clears a swinging door in a tight toilet. The body is zinc alloy in a brushed nickel finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Black.

• Holds a single standard roll and swaps over in seconds
• 65mm projection, which keeps it tight to the wall in a narrow toilet
• Zinc alloy body with a brushed nickel finish that matches Projix taps, rails and hooks
• Brass four-point fixings so it stays on the wall, rated for commercial toilets
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use plugs in plasterboard or tiles, and check for pipes before you drill beside the cistern.

Pair it with the Projix toilet brush and holder, robe hook and towel rails in the same finish.

Specifications

Construction material: Zinc
Overall length: 175 mm
Projection: 65 mm
Height: 98 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Fixing Kit
• Installation Instructions

Soap sliding around the edge of the basin? The Raymor Edge II Soap Holder in Brushed Nickel gives a bar of soap a proper home on the wall, out of the puddle. Squared like the rest of the Edge II range, it's brass with a brushed nickel finish, so it won't stain or corrode. It's 206mm wide, 24mm high and 120mm deep, which suits a shower wall or the space beside the basin. A fixing kit and installation instructions are in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• Wall-mounted soap dish, so the bar dries between uses instead of sitting in water
• Brass construction with a brushed nickel finish that holds up in the shower
• 206mm wide and 120mm deep, enough for a full bar without crowding the wall
• Fixing kit and installation instructions included, ready for a quick fit
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall using the supplied kit. Use tile plugs on tiled walls and check for pipes before drilling.

Edge II also covers towel rails, shelves, hand towel holders and square tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 206 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Soap holder
• Fixing Kit
• Installation Instructions

No vanity storage and nowhere to put the hand wash? The Raymor Projix Glass Shelf 610mm in Black gives you a 610mm run of tempered glass shelf, 157mm deep, enough for a row of full size bottles above the basin or next to the bath. Tempered glass wipes clean and won't stain, and the zinc alloy brackets carry a black finish to match Projix tapware. It mounts on brass four-point fixings and is rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• 610mm wide and 157mm deep, so it holds bottles, a soap dispenser and a toothbrush cup at once
• Tempered glass shelf that resists chipping and cleans with a wipe
• Zinc alloy brackets with a black finish that match Projix taps and rails
• Brass four-point fixings, which keep the shelf level under a load of bottles
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Go into studs or use tile-rated anchors, keep the load sensible, and ask your handyman if you're unsure about the wall.

Pair it with Projix towel rails, robe hooks, roll holders and pin lever tapware.

Specifications

Construction material: Zinc
Overall length: 610 mm
Projection: 157 mm
Height: 54.5 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Hand towel always ending up on the vanity? The Raymor Edge II Hand Towel Holder in Brushed Nickel is a short, squared rail sized for a hand towel next to the basin, in an ensuite or a powder room where a full rail won't fit. It's brass with a brushed nickel finish, so it shrugs off wet hands and cleaning. At 239mm wide, 30mm high and 72.5mm deep it sits neatly under a mirror or beside the vanity. Fixing kit and installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour.

• 239mm rail sized for a hand towel, which suits powder rooms and tight ensuites
• Brass build with a brushed nickel finish that resists tarnish and wipes clean
• 72.5mm projection, so the towel hangs clear of the wall and dries faster
• Fixing kit and installation instructions supplied
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with the supplied fixings. Check for pipes and cables before you drill next to the basin.

Match it with Edge II full towel rails, the soap holder, robe hooks and square tapware.

Specifications

Construction material: Brass
Overall length: 239 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel holder
• Fixing Kit
• Installation Instructions

Want a shelf that goes with round tapware rather than fighting it? The Raymor Boston II Glass Shelf 530mm in Brushed Nickel gives you a proper spot for soap, moisturiser and a toothbrush cup above the basin or beside the bath. A glass shelf sits in a round brass rail, so it wipes clean and won't discolour. It's 530mm wide, 98mm high and 133mm deep, enough for a row of bottles. The rounded rail suits Boston II and other curved tapware. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Chrome.

• Glass shelf on a brass rail, so bottles sit flat and the surface wipes clean
• 530mm wide and 133mm deep, which fits a row of full size bottles
• Round rail with a brushed nickel finish that matches Boston II and other curved tapware
• Brass construction that holds its shape in a steamy bathroom
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use proper anchors in tiles, and go easy on the weight. Ask your handyman or plumber if unsure.

Boston II also does towel rails, robe hooks, roll holders and tapware in the same three finishes.

Specifications

Construction material: Glass, Brass
Overall length: 530 mm
Projection: 133 mm
Height: 98 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Replacing a rail and want square lines to match the taps? The Raymor Edge II Double Towel Rail 635mm in Brushed Nickel puts two square bars side by side on one bracket, so a pair of bath towels dry flat instead of overlapping. The 635mm width suits an ensuite or a smaller bathroom, and the 120mm projection leaves room between the bars for air to move. It's solid brass under a brushed nickel finish, with installation instructions supplied. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Chrome, and in a 785mm length.

• Two bars side by side, which doubles your hanging space on one wall
• 635mm wide, a sensible fit for an ensuite or a compact bathroom
• Solid brass with a brushed nickel finish that won't tarnish in steam
• 120mm projection, so both towels get airflow and dry properly
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use decent anchors in tile, and ask your handyman or plumber if you're not sure.

Match it with Edge II single rails, robe hooks and roll holders, or step up to the 785mm double rail for a longer wall.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Family of four fighting over one rail? The Raymor Boston II Double Towel Rail 850mm in Chrome is the longer of the two Boston II double rails, with twin round bars across 850mm of wall. That's room for two bath sheets hung flat, or towels and a bath mat. The bars sit 118mm out from the wall, so air gets around both. It's brass all the way through with a chrome finish, and installation instructions come with the rail. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• 850mm long, so two bath sheets hang flat without overlapping
• Twin bars for double the hanging space on one set of fixings
• Brass throughout in a chrome finish, made to shrug off a steamy bathroom
• 118mm projection that lets air move around both towels
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long wants solid fixing, so find the studs or use good anchors in tiles.

If 850mm is too wide, the Boston II double rail also comes at 650mm, with matching single rails and hooks.

Specifications

Construction material: Brass
Overall length: 850 mm
Projection: 118 mm
Height: 52 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Old rail too short for the wall above the bath? The Raymor Edge II Single Towel Rail 785mm in Chrome is the longer rail in the range, wide enough for a bath sheet or two hand towels side by side on one bar. The squared profile suits square tapware and modern vanities. Brass all the way through, with a chrome finish that stands up to steam, it's 785mm wide, 24mm high and sits 71.5mm off the wall. Installation instructions are included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• 785mm wide, so a bath sheet or two hand towels hang flat on one bar
• Brass construction that won't bow or corrode in a steamy bathroom
• Low 24mm profile with a 71.5mm projection, keeping it neat but clear of the wall
• Chrome finish to tie in with Edge II mixers and accessories
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall. Long rails need both ends anchored properly, so find studs or use tile-rated plugs, or get your plumber or handyman to fit it.

Team it with the 635mm Edge II rail, robe hooks, roll holders and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Powder room with no room for a proper rail? The Raymor Edge II Hand Towel Rail in Chrome is a short, single square bar built for a hand towel beside the basin or in a powder room. At 239mm wide it slots in next to a vanity where a full rail won't fit, and it stands 72.5mm off the wall so the towel hangs freely. It's solid brass with a chrome finish, instructions in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black.

• 239mm bar sized for a hand towel, which fits beside a basin where a bath towel rail won't
• Solid brass construction that keeps its shape and shrugs off splashes
• Square bar in a chrome finish to match Edge II tapware
• 72.5mm projection, so a folded hand towel hangs clear of the wall
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Check for pipes behind the wall next to the basin before drilling, or ask your plumber.

Team it with an Edge II robe hook, roll holder and basin mixer in the same finish.

Specifications

Construction material: Brass
Overall length: 239 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Hand towel rail
• Installation Instructions

Bathroom wall too narrow for a long rail but you still need two? The Raymor Edge II Double Towel Rail 635mm in Chrome puts two square bars side by side on one bracket, so a pair of bath towels dry flat instead of overlapping. The 635mm width suits an ensuite or a smaller bathroom, and the 120mm projection leaves room between the bars for air to move. It's solid brass under a chrome finish, with installation instructions supplied. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel, and in a 785mm length.

• Two bars side by side, which doubles your hanging space on one wall
• 635mm wide, a sensible fit for an ensuite or a compact bathroom
• Solid brass with a chrome finish that won't tarnish in steam
• 120mm projection, so both towels get airflow and dry properly
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use decent anchors in tile, and ask your handyman or plumber if you're not sure.

Match it with Edge II single rails, robe hooks and roll holders, or step up to the 785mm double rail for a longer wall.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Swapping out the old loo fittings for something square and simple? The Raymor Edge II Toilet Roll Holder in Chrome is a single arm holder with a square profile, made for bathrooms with Edge II or other angular tapware. It's solid brass in a chrome finish, so nothing snaps or rusts. It's 174mm wide and sits 72.5mm out from the wall, taking a standard roll you can swap with one hand. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• Single arm, so changing the roll is a one-handed job
• Solid brass body that stays firm and won't corrode in a damp toilet
• Square profile with a chrome finish that lines up with Edge II tapware
• 174mm wide and 72.5mm off the wall, which keeps it neat in a narrow toilet
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fit it where you can reach it from the seat, and check for pipes before you drill.

Prefer somewhere to rest your phone? The Edge II Roll Holder with Shelf does that. Otherwise match this one with Edge II robe hooks and towel rails in the same finish.

Specifications

Construction material: Brass
Overall length: 174 mm
Projection: 72.5 mm
Height: 30 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Toilet roll holder
• Installation Instructions

Nowhere to hang a towel by the shower? The Raymor Edge II Robe Hook in Black is a slim single hook with a square profile, made to hang a towel or robe next to the shower or behind the door. It's small, 53mm high and just 33mm off the wall, so it tucks in where a bigger hook would get in the way. Solid brass in a black finish. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• Slim square hook, so it fits on a narrow strip of wall or tile
• Solid brass that won't bend under a wet bath towel
• Black finish that matches Edge II tapware and rails
• 33mm projection, which keeps it low profile in a tight space
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed. Use a wall plug in plasterboard or tiles and check for pipes before drilling.

Grab two or three, then match them with Edge II towel rails, roll holders and a soap dish in the same finish.

Specifications

Construction material: Brass
Overall length: 16 mm
Projection: 33 mm
Height: 53 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Robe hook
• Installation Instructions

Main bathroom with a long wall and a lot of towels? The Raymor Edge II Double Towel Rail 785mm in Chrome is the longer Edge II double rail, with twin square bars stretching 785mm along the wall. Hang two bath sheets flat, or towels behind and a bath mat in front. Both bars sit 120mm from the wall so nothing sits damp against the tiles. It's solid brass throughout with a chrome finish, instructions included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• 785mm long, so two bath sheets hang flat without overlapping
• Twin square bars on one set of fixings, for double the towel space
• Solid brass build with a chrome finish that handles a steamy main bathroom
• 120mm projection that keeps both towels clear of the wall and each other
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long needs solid fixing at both ends, so find the studs or use good tile anchors.

Wall too short? The Edge II double rail also comes at 635mm, with single rails, hooks and roll holders to match.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Two towels squashed onto one bar? The Raymor Edge II Double Towel Rail 635mm in Black puts two square bars side by side on one bracket, so a pair of bath towels dry flat instead of overlapping. The 635mm width suits an ensuite or a smaller bathroom, and the 120mm projection leaves room between the bars for air to move. It's solid brass under a black finish, with installation instructions supplied. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel, and in a 785mm length.

• Two bars side by side, which doubles your hanging space on one wall
• 635mm wide, a sensible fit for an ensuite or a compact bathroom
• Solid brass with a black finish that won't tarnish in steam
• 120mm projection, so both towels get airflow and dry properly
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use decent anchors in tile, and ask your handyman or plumber if you're not sure.

Match it with Edge II single rails, robe hooks and roll holders, or step up to the 785mm double rail for a longer wall.

Specifications

Construction material: Brass
Overall length: 635 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Towels ending up on the floor because there's nowhere to hang them? The Raymor Projix Robe Hook in Chrome is a small fix that makes a real difference: one hook for a towel or robe, screwed straight to the wall. It's compact at 43mm wide and 55mm high, and stands 65mm off the wall so a thick bath towel hangs without slipping. The hook is zinc alloy in a chrome finish, held on with brass four-point fixings, and it's rated for commercial use. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Single hook for a towel or robe, handy behind a door or beside the shower
• 65mm projection, so a folded bath towel hangs clear of the wall
• Zinc alloy build with a chrome finish that shrugs off steam
• Brass four-point fixings, for a hook that doesn't work loose
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Screw fixed to the wall. Use a wall plug in plasterboard or tiles, and check for pipes before you drill.

Fit a couple, then match them with Projix towel rails, roll holders and shelves in the same finish.

Specifications

Construction material: Zinc Die Cast
Overall length: 43 mm
Projection: 65 mm
Height: 55 mm
Country of origin: China
Warranty: 5 Years parts. 1 Years finish, labour

What's In The Box

• 1 x Robe hook
• Installation Instructions

Bath sheets that need more than a short rail? The Raymor Edge II Double Towel Rail 785mm in Black is the longer Edge II double rail, with twin square bars stretching 785mm along the wall. Hang two bath sheets flat, or towels behind and a bath mat in front. Both bars sit 120mm from the wall so nothing sits damp against the tiles. It's solid brass throughout with a black finish, instructions included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Chrome and Brushed Nickel.

• 785mm long, so two bath sheets hang flat without overlapping
• Twin square bars on one set of fixings, for double the towel space
• Solid brass build with a black finish that handles a steamy main bathroom
• 120mm projection that keeps both towels clear of the wall and each other
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. A rail this long needs solid fixing at both ends, so find the studs or use good tile anchors.

Wall too short? The Edge II double rail also comes at 635mm, with single rails, hooks and roll holders to match.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Need a longer rail for a big bath sheet? The Raymor Edge II Single Towel Rail 785mm in Black is the longer rail in the range, wide enough for a bath sheet or two hand towels side by side on one bar. The squared profile suits square tapware and modern vanities. Brass all the way through, with a black finish that stands up to steam, it's 785mm wide, 24mm high and sits 71.5mm off the wall. Installation instructions are included. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• 785mm wide, so a bath sheet or two hand towels hang flat on one bar
• Brass construction that won't bow or corrode in a steamy bathroom
• Low 24mm profile with a 71.5mm projection, keeping it neat but clear of the wall
• Black finish to tie in with Edge II mixers and accessories
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Screw fixed to the wall. Long rails need both ends anchored properly, so find studs or use tile-rated plugs, or get your plumber or handyman to fit it.

Team it with the 635mm Edge II rail, robe hooks, roll holders and tapware in the same finish.

Specifications

Construction material: Brass
Overall length: 785 mm
Projection: 71.5 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Soap sliding around the edge of the basin? The Raymor Edge II Soap Dish in Chrome is a wall mounted dish that keeps a bar of soap up off the bench, beside the basin or in the shower. The squared shape matches Edge II and other angular tapware. It's solid brass with a chrome finish, 206mm wide, 24mm high and 120mm deep, so it takes a full size bar with space around it. Installation instructions come in the box. Backed by a 10 year warranty on the body, chrome finish and fittings, 1 year on seals and labour.

• Lifts the soap off the bench, so the vanity stays cleaner and the soap lasts longer
• Solid brass dish with a chrome finish that rinses clean
• 206mm wide and 120mm deep, which suits a full size bar of soap
• Squared shape that lines up with Edge II tapware and accessories
• 10 year warranty on the body, chrome finish and fittings, 1 year on seals and labour

Wall mounted. In a shower, fix into the tile with proper anchors and seal the screw holes, or ask your plumber.

Team it with Edge II towel rails, robe hooks and a roll holder in Chrome.

Specifications

Construction material: Brass
Overall length: 206 mm
Projection: 120 mm
Height: 24 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Soap dish
• Installation Instructions