All Products

Wash up in the middle, drain on either side. The Oliveri Ultraform single bowl topmount sink with double drainer is a practical swap for a tired kitchen sink, and a solid pick for a new benchtop. It drops in from the top, so installation is straightforward for your plumber. It's made from stainless steel at Oliveri's Adelaide factory, so it handles daily use and stays easy to clean year after year. The bowl measures 385mm x 330mm, with drainers each side for stacking and prep. Overall it's 1180mm x 470mm x 171mm, so it needs a decent run of bench. Get the tape measure out first. Quality you can trust at a fair price.

• Stainless steel construction that resists knocks and wear, so it holds up to everyday kitchen use
• Bowl size of 385mm x 330mm suits everyday washing up and larger pots and pans
• Double drainers each side of the bowl give you extra space to drain dishes and prep food
• Overall dimensions of 1180mm x 470mm x 171mm for a full topmount fit across a wide benchtop
• Available in 1 taphole, 3 tapholes and 0 taphole, so you can match it to your mixer setup
• Easy to maintain, wiping clean with minimal fuss

Check your benchtop cut-out and taphole requirements before ordering, or ask your plumber to confirm the fit.

What's In The Box

1 x Sink
1 x Installation Instructions
1 x Adjustable Clip Kit
1 x Oliveri Basket Waste

Downloads

Download the specification sheet below:

Oliveri Ultraform single bowl topmount sink dbl drainer

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Wash up on one side, stack the drainer on the other. The Oliveri Sonetto single bowl topmount sink drainer 1TH is a practical pick when you're replacing a tired kitchen sink or fitting out a new benchtop. It drops in from the top, so installation is straightforward for most bench cutouts. It's made from 1.2mm brushed stainless steel, so it handles daily use and looks right next to modern appliances. Overall it measures 1035mm x 510mm x 211mm, with a generous bowl at 470mm x 405mm. There's a bamboo preparation board included that sits neatly in the main bowl, which means extra workspace on the nights the bench disappears under groceries. The single tap hole (1TH) keeps mixer fitting simple.

• Brushed stainless steel construction at 1.2mm thickness, which resists knocks and wipes clean easily
• Bowl size of 470mm x 405mm gives you plenty of room for larger pots and baking trays
• Bamboo preparation board included, fitting comfortably in the main bowl for extra bench space
• Available with a right hand or left hand drainer, so you can match your layout
• Single tap hole (1TH) suits a standard kitchen mixer
• Durable and low-maintenance, so it keeps its finish through years of everyday use

Check your benchtop cutout against the 1035mm x 510mm dimensions before ordering, or ask your plumber to confirm the fit.

What's In The Box

• 1 x Sink
• 1 x Installation Instructions
• 1 x Topmount Clip Kit
• 1 x Oliveri Basket Waste
• 1 x Sonetto Bamboo Chopping Board

Downloads

Download the specification sheet below:

Oliveri Sonetto single bowl topmount sink drainer 1TH

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Old sink gone dull and stained? The Oliveri Ultraform single bowl topmount sink L/H drainer is a practical swap, and just as at home on a brand new benchtop. It sits on top of the bench, so installation is straightforward for your plumber. Stainless steel construction means it's tough enough for daily use and simple to keep clean. Overall dimensions are 890mm x 470mm x 171mm, with a generous bowl measuring 385mm x 330mm, so there's room for larger pots and pans. The left-hand drainer keeps washed-up dishes to one side, away from your prep space. Made at Oliveri's Adelaide factory, which says plenty about the quality.

• Stainless steel construction that stands up to years of daily use in a busy kitchen
• Bowl size of 385mm x 330mm, deep and wide enough for soaking trays and stacking dishes
• Overall dimensions of 890mm x 470mm x 171mm, ideal for checking against your benchtop cut-out
• Easy to wipe down and maintain, so it keeps looking tidy with minimal effort
• Available in 1 taphole, 3 tapholes, and 0 taphole to suit how you set up your mixer or tapware

Measure your benchtop cut-out before ordering, and confirm the taphole option matches your tapware or ask your plumber.

What's In The Box

1 x Sink
1 x Installation Instructions
1 x Adjustable Clip Kit
1 x Oliveri Basket Waste

Downloads

Download the specification sheet below:

Oliveri Ultraform single bowl topmount sink L/H drainer

Warranty

Oliveri toilets are covered by;

• 10 years vitreous china cistern and pan replacement of product
• 2 years valves, fittings and seat replacement
• 1 year seals and labour (refer to Service & Warranty page)
• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Two rails means two towels drying properly, not one damp one draped over the other. The Nero Pearl/Vitra Double Towel Rail in Matte Black gives you a practical spot to hang and dry towels, whether you're fitting out a new bathroom or replacing worn hardware. Pick 600mm or 800mm to match the wall you're working with. It's built from brass and zinc for lasting durability, with rounded back-plates and a matte black finish for a classic look. Nero Tapware products are certified to Australian standards and comply with the Australian WELS scheme, and they're backed by an industry-leading warranty. Quality you can depend on at a fair price.

• Available in 600mm or 800mm lengths, giving you the flexibility to suit your wall space
• Brass and zinc construction stands up to daily bathroom use for years
• Matte black finish that pairs easily with modern and classic fittings alike
• Rounded back-plates add a clean, classic look to the wall
• Straightforward to install, so your plumber or handy DIYer can fit it without fuss

Check your fixing points and wall type before ordering, or ask your plumber if you're unsure of the mount.

What's In The Box

Downloads

Download the specification sheet below:

Nero Pearl/Vitra Double Towel Rail Matte Black

Download the installation instructions below:

Nero Pearl/Vitra Double Towel Rail Matte Black

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Old mirror gone spotty around the edges? The Thermogroup Rectangle 25mm Bevel Edge Mirror is a practical swap, and just as good for a fresh fit-out. It's part of the Montana Range, with six sizes to suit your wall: MS6075HN 600 x 750mm, MS6090HN 600 x 900mm, MS9075HN 750 x 900mm, MS9090HN 900 x 900mm, MS1280HN 1200 x 800mm and MS1590HN 1500 x 900mm. Each one uses a 5mm silver mirror with a 25mm bevel edge, so you get a clean, finished look. The commercial strength vinyl backing is copper-free and edge-sealed, which stops foil creep forming along the edges over time. That's the black speckling you've been squinting past for years. Covered by a 2 year warranty: quality at a fair price.

• Six sizes from 600 x 750mm up to 1500 x 900mm, so you can match the mirror to your vanity and wall space
• 5mm silver mirror with a 25mm bevel edge for a crisp, tidy finish
• Copper-free, edge-sealed vinyl backing resists foil creep, which means a longer-lasting mirror
• Hangs in landscape or portrait orientation to suit your layout
• Two-part aluminium hanger included, so wall mounting is straightforward
• Backed by a 2 year warranty

Check the size and orientation against your wall before ordering. Need a hand? Ask your installer.

What's In The Box

Downloads

Download the specification sheet below:

Thermogroup Rectangle 25mm Bevel Edge Mirror

Warranty

Thermogroup accessories are covered by 10 Year replacement product or parts*

The warranty period starts on the date of purchase, but the registration is only confirmed when the online warranty form has been complete and the registration details are submitted to the online warranty database in full, checked by Thermogroup and written confirmation is issued.

Heated Towel Rails, Ladders 

• Polished Stainless Steel: 10 Year Warranty
• Brushed Stainless Steel: 7 Year Warranty
• Matte Black: 7 Year Warranty
• Brushed Gold: 7 Years Warranty
• Polished Rose Gold: 7 Years Warranty
• Gunmetel: 7 Years Warranty
• Made to Order Finishes: 5 Year Warranty
• Liquid Filled: 25 Years Warranty on Rail, 5 Years Warranty on Element

Thermorad In-Wall Towel Dryer

• 10 Year Warranty

Underfloor Heating

• Lifetime Warranty
• We are so confident of the quality of our German-made Thermonet Underfloor Heating that we give each system a warranty that lasts a Lifetime with 3 year warranty on our Thermostats.

Magnifying/Shaving/Make Up Mirrors

• 1 Year Warranty

Backlit Mirrors

• 3 Year Warranty

Timers

• 2 Year Warranty

For After Sales & Service enquiries you can contact Thermogroup directly on (02) 6953 4225 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing a tired or damaged mirror, or fitting one to a fresh vanity? The Thermogroup Rectangle 25mm Bevel Edge Mirror does the job without fuss. It's part of the Montana Range, built to slot into your space at a fair price. The glass is a 5mm silver panel with a 25mm bevel edge, so you get a clean, finished look. Behind it sits a commercial strength vinyl backing for solid support. It's copper-free with sealed edges too, which stops foil creep spoiling the edges over time. It glues straight to the wall, so it hangs flat and flush. There's a 2 year warranty on it. Landscape or portrait, your call.

• 5mm silver mirror with a 25mm bevel edge for a crisp, tidy finish that suits most bathrooms
• Fits landscape or portrait orientation, so you can work it into your layout either way
• Copper-free with edge sealing, which helps prevent foil creep and keeps the edges looking sharp longer
• Commercial strength vinyl backing for solid, lasting support behind the glass
• Glues directly to the wall for a flat, flush fit
• Covered by a 2 year warranty

Because it glues to the wall, check your surface is sound and flat first. Need a hand? Your plumber or tiler can fit it.

What's In The Box

Downloads

Download the specification sheet below:

Thermogroup Rectangle 25mm Bevel Edge Mirror

Warranty

Thermogroup accessories are covered by 10 Year replacement product or parts*

The warranty period starts on the date of purchase, but the registration is only confirmed when the online warranty form has been complete and the registration details are submitted to the online warranty database in full, checked by Thermogroup and written confirmation is issued.

Heated Towel Rails, Ladders 

• Polished Stainless Steel: 10 Year Warranty
• Brushed Stainless Steel: 7 Year Warranty
• Matte Black: 7 Year Warranty
• Brushed Gold: 7 Years Warranty
• Polished Rose Gold: 7 Years Warranty
• Gunmetel: 7 Years Warranty
• Made to Order Finishes: 5 Year Warranty
• Liquid Filled: 25 Years Warranty on Rail, 5 Years Warranty on Element

Thermorad In-Wall Towel Dryer

• 10 Year Warranty

Underfloor Heating

• Lifetime Warranty
• We are so confident of the quality of our German-made Thermonet Underfloor Heating that we give each system a warranty that lasts a Lifetime with 3 year warranty on our Thermostats.

Magnifying/Shaving/Make Up Mirrors

• 1 Year Warranty

Backlit Mirrors

• 3 Year Warranty

Timers

• 2 Year Warranty

For After Sales & Service enquiries you can contact Thermogroup directly on (02) 6953 4225 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Every bathroom needs one, and a round mirror softens all those straight tile lines. The Thermogroup Round Polished Edge Mirror is a practical pick whether you're refreshing an old bathroom or fitting out a new vanity. It's from the Rio Range, in 500mm, 600mm, 700mm, 800mm and 900mm diameters, so you can match the size to your wall and layout. The 5mm silver mirror has a polished edge for a clean, frameless finish that suits most bathrooms. Build quality is where it earns its keep: commercial-strength vinyl backing, copper-free construction, and sealed edges that help stop foil creep over time. A two-part aluminium hanger comes with it for straightforward wall mounting, and there's a 2-year warranty behind it.

• 5mm silver mirror with a polished edge, giving you a clean frameless look
• Available in 500mm, 600mm, 700mm, 800mm or 900mm diameters, so you can pick the right fit for your space
• Copper-free construction with a commercial-strength vinyl backing, built to last in a bathroom setting
• Edges are sealed to help prevent foil creep, keeping the mirror looking good for longer
• Two-part aluminium hanger included, making wall mounting easier
• Covered by a 2-year warranty, so you can buy with confidence

Check your wall type before mounting, or ask your installer if you're unsure the fixings suit.

Specifications

• Construction material: Silver mirror
• Edge type: Polished
• Orientation: Landscape and Portrait
• Mounting method: Hangers
• Mirror thickness: 5mm (14mm overall depth on the wall, including the hangers)
• Overall length diameter: Ø 500mm/600mm/700mm/800mm/900mm
• Warranty: 2 years

What's In The Box

• Thermogroup Round Polished Edge Mirror 500mm - 900mm
• Fixing Kit

Downloads

Download the specification sheet below:

Thermogroup Round Polished Edge Mirror 500mm - 900mm

Download the installation instructions below:

Thermogroup Round Polished Edge Mirror 500mm - 900mm

Warranty

Thermogroup accessories are covered by 10 Year replacement product or parts*

The warranty period starts on the date of purchase, but the registration is only confirmed when the online warranty form has been complete and the registration details are submitted to the online warranty database in full, checked by Thermogroup and written confirmation is issued.

Heated Towel Rails, Ladders 

• Polished Stainless Steel: 10 Year Warranty
• Brushed Stainless Steel: 7 Year Warranty
• Matte Black: 7 Year Warranty
• Brushed Gold: 7 Years Warranty
• Polished Rose Gold: 7 Years Warranty
• Gunmetel: 7 Years Warranty
• Made to Order Finishes: 5 Year Warranty
• Liquid Filled: 25 Years Warranty on Rail, 5 Years Warranty on Element

Thermorad In-Wall Towel Dryer

• 10 Year Warranty

Underfloor Heating

• Lifetime Warranty
• We are so confident of the quality of our German-made Thermonet Underfloor Heating that we give each system a warranty that lasts a Lifetime with 3 year warranty on our Thermostats.

Magnifying/Shaving/Make Up Mirrors

• 1 Year Warranty

Backlit Mirrors

• 3 Year Warranty

Timers

• 2 Year Warranty

For After Sales & Service enquiries you can contact Thermogroup directly on (02) 6953 4225 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing a tired mirror, or fitting out a new vanity? The Thermogroup Oval Polished Edge Mirror is a straightforward upgrade either way. It's part of the Cody Range, built to suit your space and quality at a fair price. The mirror itself is 5mm silver with a neat polished edge, so it looks tidy from every angle without needing a frame. A commercial strength vinyl backing keeps it tough, and it's copper-free with edge sealing to stop foil creep along the edges over time. The two part aluminium hanger makes mounting simple. Hang it landscape or portrait, whichever way your wall wants it. Backed by a 2-year warranty.

• Made from 5mm silver mirror for a clear, reliable reflection that holds up to daily use
• Polished edge gives a clean, finished look without a frame
• Hangs in either landscape or portrait orientation, so it fits the way your space is set up
• Copper-free with edge sealing, which helps prevent foil creep along the edges
• Commercial strength vinyl backing for lasting durability
• Supplied with a two part aluminium hanger, so wall mounting is simple
• Backed by a 2-year warranty for peace of mind

Not sure about wall fixings for your surface? Have your plumber or installer confirm before mounting.

Specifications

• Construction material: Silver mirror
• Edge type: Polished
• Orientation: Landscape and Portrait
• Mounting method: Hangers
• Mirror thickness: 5mm (14mm overall depth on the wall, including the hangers)
• Overall height: 800mm / 900mm
• Overall width: 600mm / 750mm
• Warranty: 2 years

What's In The Box

• 1 x Mirror
• 1 x Installation Instructions

Downloads

Download the specification sheet below:
Thermogroup Oval Polished Edge Mirror 600x800mm
Thermogroup Oval Polished Edge Mirror 900x750mm

Warranty

Thermogroup accessories are covered by 10 Year replacement product or parts*

The warranty period starts on the date of purchase, but the registration is only confirmed when the online warranty form has been complete and the registration details are submitted to the online warranty database in full, checked by Thermogroup and written confirmation is issued.

Heated Towel Rails, Ladders 

• Polished Stainless Steel: 10 Year Warranty
• Brushed Stainless Steel: 7 Year Warranty
• Matte Black: 7 Year Warranty
• Brushed Gold: 7 Years Warranty
• Polished Rose Gold: 7 Years Warranty
• Gunmetel: 7 Years Warranty
• Made to Order Finishes: 5 Year Warranty
• Liquid Filled: 25 Years Warranty on Rail, 5 Years Warranty on Element

Thermorad In-Wall Towel Dryer

• 10 Year Warranty

Underfloor Heating

• Lifetime Warranty
• We are so confident of the quality of our German-made Thermonet Underfloor Heating that we give each system a warranty that lasts a Lifetime with 3 year warranty on our Thermostats.

Magnifying/Shaving/Make Up Mirrors

• 1 Year Warranty

Backlit Mirrors

• 3 Year Warranty

Timers

• 2 Year Warranty

For After Sales & Service enquiries you can contact Thermogroup directly on (02) 6953 4225 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Small ensuite, or a floor with a toilet and vanity to work around? A fixed mat won't sit neatly in a space like that. The Thermogroup Thermowire Underfloor Heating Loose Wire Cable gets around the problem: you set the spacing yourself, so you can run the cable where it's actually needed. It's only 3.5mm thick and comes with black cloth tape for securing it to the substrate, plus a low profile 4mm cold tail that hides within the tile adhesive layer. The IP68 protection rating makes it safe in bathrooms, showers and other wet areas. Made in the UK and backed by a lifetime warranty, so warm tiles on a cold morning stay a warm memory rather than a callback.

• Loose wire design lets you space the cable to suit your layout and target heat output, so you get even warmth right where you want it
• Recommend an output of 150W/m² for larger areas directly undertile outside the bathroom, and 200W/m² for bathrooms, either above or below the screed, to match the room's needs
• IP68 protection rating means it's safe for use in bathrooms, showers and other wet room locations without any electrical hazard
• Slim 3.5mm cable and a 4mm cold tail sit low in the adhesive, so your tile finish stays flush
• Kit includes the Thermowire cable, black cloth tape and an installation guide, giving you what you need to get started
• Choose from 1 square metre through to 18 square metre kits to cover anything from a small ensuite to a larger floor
• Maximum temperature of 28 degrees, backed by a lifetime warranty for lasting peace of mind

Compatible with all Thermotouch controllers. Underfloor heating must be installed by a licensed electrician, so speak to your electrician before ordering.

Specifications

Greater efficiency can also be achieved by including by:

• Including a layer of insulation
• Splitting the heating into different zones
• Using a programmable thermostat to only have the heating on when you need it

There is a number of factors that will influence the efficiency and the running costs of your underfloor heating. This includes:

• The set temperature
• The size and design of the room/home
• Level of insulation
• External temperatures
• Flooring products used
• Your electricity tariff
• Length of time the floor heating is on
• If there is any other heat sources in the room

To get an estimated running cost use Thermogroup's running costs calculator.

What's In The Box

Thermowire loose wire underfloor heating cable
Cloth installation tape
Installation guide & warranty form

Downloads

Download the specification sheet below:

Thermogroup Thermowire Underfloor Heating Loose Wire Cable

Download the installation instructions below:

Thermogroup Thermowire Underfloor Heating Loose Wire Cable

Warranty

Thermogroup accessories are covered by 10 Year replacement product or parts*

The warranty period starts on the date of purchase, but the registration is only confirmed when the online warranty form has been complete and the registration details are submitted to the online warranty database in full, checked by Thermogroup and written confirmation is issued.

Heated Towel Rails, Ladders 

• Polished Stainless Steel: 10 Year Warranty
• Brushed Stainless Steel: 7 Year Warranty
• Matte Black: 7 Year Warranty
• Brushed Gold: 7 Years Warranty
• Polished Rose Gold: 7 Years Warranty
• Gunmetel: 7 Years Warranty
• Made to Order Finishes: 5 Year Warranty
• Liquid Filled: 25 Years Warranty on Rail, 5 Years Warranty on Element

Thermorad In-Wall Towel Dryer

• 10 Year Warranty

Underfloor Heating

• Lifetime Warranty
• We are so confident of the quality of our German-made Thermonet Underfloor Heating that we give each system a warranty that lasts a Lifetime with 3 year warranty on our Thermostats.

Magnifying/Shaving/Make Up Mirrors

• 1 Year Warranty

Backlit Mirrors

• 3 Year Warranty

Timers

• 2 Year Warranty

For After Sales & Service enquiries you can contact Thermogroup directly on (02) 6953 4225 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Swapping a dated mirror, or fitting out a new vanity wall from scratch? The Thermogroup Ablaze Mirror D-Shaped Polished Edge Mirror 900 x 750mm is a practical pick for both. The D-shape mounts in four different orientations, so you can set it to suit your wall and layout. It's a 5mm silver mirror with a polished edge, which gives you that clean frameless look against most vanities. Behind the glass there's commercial-strength vinyl backing, and it's copper-free with edge sealing to stop foil creep along the edges over time. Backed by a 2-year warranty. Quality you can trust at a fair price.

• D-shaped design with soft edges gives your bathroom a calm, contemporary feel
• Polished edge for a clean, frameless look that suits a range of styles
• 5mm silver mirror with commercial-strength vinyl backing for solid, lasting quality
• Copper-free and edge-sealed, so the edges resist foil creep as the years go on
• Mounts in four different orientations to match your wall and preferred style
• Available with a demister option, which clears the mirror after a hot shower, so no more wiping it down with your towel
• Comes with metal hangers for straightforward mounting

A glue-to-wall version is also available if that suits your space better. Need a hand? Contact our team for details.

Specifications

• Construction material: Silver Mirror
• Edge type: Polished Edge
• Orientation: Four Hanging Orientations
• Mounting method: Hangers
• Mirror thickness: 5mm (14mm overall depth on the wall, including the hangers)
• Warranty: 2 years

What's In The Box

• Thermogroup Hamilton Ablaze Mirror D-Shaped Polished Edge Mirror
• Fixing Kit

Downloads

Download the specification sheet below:

Thermogroup Ablaze Mirror D-Shaped Polished Edge Mirror 900 x 750mm

Download the installation instructions below:

Thermogroup Ablaze Mirror D-Shaped Polished Edge Mirror 900 x 750mm

Warranty

Thermogroup accessories are covered by 10 Year replacement product or parts*

The warranty period starts on the date of purchase, but the registration is only confirmed when the online warranty form has been complete and the registration details are submitted to the online warranty database in full, checked by Thermogroup and written confirmation is issued.

Heated Towel Rails, Ladders 

• Polished Stainless Steel: 10 Year Warranty
• Brushed Stainless Steel: 7 Year Warranty
• Matte Black: 7 Year Warranty
• Brushed Gold: 7 Years Warranty
• Polished Rose Gold: 7 Years Warranty
• Gunmetel: 7 Years Warranty
• Made to Order Finishes: 5 Year Warranty
• Liquid Filled: 25 Years Warranty on Rail, 5 Years Warranty on Element

Thermorad In-Wall Towel Dryer

• 10 Year Warranty

Underfloor Heating

• Lifetime Warranty
• We are so confident of the quality of our German-made Thermonet Underfloor Heating that we give each system a warranty that lasts a Lifetime with 3 year warranty on our Thermostats.

Magnifying/Shaving/Make Up Mirrors

• 1 Year Warranty

Backlit Mirrors

• 3 Year Warranty

Timers

• 2 Year Warranty

For After Sales & Service enquiries you can contact Thermogroup directly on (02) 6953 4225 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Cold tiles first thing on a winter morning are no fun. The Thermogroup Thermowire Underfloor Heating Loose Wire Cable Kit and 5245 Dual Thermostat is a practical way to add warmth underfoot, and it suits small or awkward rooms where a fixed mat won't sit neatly. Loose wire means you set your own cable spacing and work around fixtures, so the heat lands where you want it. Everything's in the box: the Thermowire cable, black cloth tape for securing the cable to the substrate, the programmable 5245 dual thermostat, a floor sensor and conduit, and a mat monitor. The cable is just 3.5mm thick with a low 4mm cold tail that hides in the tile adhesive layer, so your floor height stays down. Made in the UK, with a lifetime warranty on the cable and 3 years on the thermostat.

• Loose wire design lets you route around obstacles and tune your cable spacing for the heat output you want
• The dual thermostat runs your underfloor heating and a second appliance, such as a heated towel rail, on separate schedules from one controller, so you set and forget both
• Kits range from 1 square metre through to 18 square metre, so you can match the size to the space you're heating
• IP68 protection rating, which means it's safe for use in bathrooms, showers and other wet areas without electrical hazard
• Maximum operating temperature of 28 degrees, so floors stay comfortable rather than hot
• Slim 3.5mm cable and 4mm cold tail conceal within the tile adhesive layer, keeping your finished floor low
• Lifetime warranty on the cable and a 3 year warranty on the thermostat for long-term peace of mind

For under tile applications, Thermogroup recommends 150w/m² outside the bathroom and 200w/m² in the bathroom, whether under the tiles or the screed.

This kit needs an electrician to connect, so have your sparky on hand for install. Then it's warm toes and no more cold-tile dash in July.

Specifications

Greater efficiency can also be achieved by including by:

• Including a layer of insulation
• Splitting the heating into different zones
• Using a programmable thermostat to only have the heating on when you need it

There is a number of factors that will influence the efficiency and the running costs of your underfloor heating. This includes:

• The set temperature
• The size and design of the room/home
• Level of insulation
• External temperatures
• Flooring products used
• Your electricity tariff
• Length of time the floor heating is on
• If there is any other heat sources in the room

To get an estimated running cost use Thermogroup's running costs calculator.

What's In The Box

Thermowire loose wire underfloor heating cable
Programmable dual thermostat
Floor temperature sensor
Sensor conduit
Cloth installation tape
Installation guide & warranty form

Downloads

Download the installation instructions below:

Thermogroup Thermowire Underfloor Heating Loose Wire Cable Kit and 5245 Dual Thermostat

Warranty

Thermogroup accessories are covered by 10 Year replacement product or parts*

The warranty period starts on the date of purchase, but the registration is only confirmed when the online warranty form has been complete and the registration details are submitted to the online warranty database in full, checked by Thermogroup and written confirmation is issued.

Heated Towel Rails, Ladders 

• Polished Stainless Steel: 10 Year Warranty
• Brushed Stainless Steel: 7 Year Warranty
• Matte Black: 7 Year Warranty
• Brushed Gold: 7 Years Warranty
• Polished Rose Gold: 7 Years Warranty
• Gunmetel: 7 Years Warranty
• Made to Order Finishes: 5 Year Warranty
• Liquid Filled: 25 Years Warranty on Rail, 5 Years Warranty on Element

Thermorad In-Wall Towel Dryer

• 10 Year Warranty

Underfloor Heating

• Lifetime Warranty
• We are so confident of the quality of our German-made Thermonet Underfloor Heating that we give each system a warranty that lasts a Lifetime with 3 year warranty on our Thermostats.

Magnifying/Shaving/Make Up Mirrors

• 1 Year Warranty

Backlit Mirrors

• 3 Year Warranty

Timers

• 2 Year Warranty

For After Sales & Service enquiries you can contact Thermogroup directly on (02) 6953 4225 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fogged glass every morning gets old fast. The Thermogroup Backlit Arch Shape LED Mirror 500x800 with Warm or Cool Light and Demister sorts that out, and it's a straight upgrade on a tired bathroom mirror. It's sized right for a single vanity, or pair two above a double. The 5mm silver mirror has a polished edge border, and the arch shape softens the look of the space. LED lighting sits behind the mirror and shines out from the back for gentle, ambient light. Pick Cool white or Warm white to suit your bathroom. The built-in demister pad keeps the glass clear while you shower or bathe. At 500x800x45 with an IP44 rating, it's safe for wet areas, and there's a 3 year warranty behind it.

• Choose Cool white or Warm white lighting from the drop-down list to match the feel of your bathroom
• Integrated demister prevents fogging and turns on automatically with the lighting, so the mirror stays clear
• Portrait mounted for use above a basin, giving you a clean, balanced look over the vanity
• 5mm silver mirror with a polished edge border for a quality finish that lasts
• IP44 rated, which makes it safe for use in bathrooms
• Measures 500x800x45 to fit neatly above a single vanity, or run two side by side over a double
• Backed by a 3 year warranty

Hardwired installation only, and it needs a separate switch to operate, so have your electrician wire it in.

Specifications

• Overall width: 500mm
• Overall height: 800mm
• Overall depth: 45mm
• Total Watts: 47W
• Voltage: 240V
• Kelvins: 6400K (Cool), 2700K (Warm)
• Orientation: Portrait Only
• Wall mounting: Wall bracket (included)
• Wiring type: Concealed Hardwired
• Installation: Plug-in 1.5m cord
• Rating: IP44
• Weight: 12kg
• Warranty: 3 years

What's In The Box

• Thermogroup Ablaze Backlit Arch Shape Mirror - Includes Mirror Demister
• Installation instructions
• Fixing kit

Downloads

Download the specification sheet below:

Thermogroup Backlit Arch Shape LED Mirror 500x800 with Warm or Cool Light and Demister

Warranty

Thermogroup accessories are covered by 10 Year replacement product or parts*

The warranty period starts on the date of purchase, but the registration is only confirmed when the online warranty form has been complete and the registration details are submitted to the online warranty database in full, checked by Thermogroup and written confirmation is issued.

Heated Towel Rails, Ladders 

• Polished Stainless Steel: 10 Year Warranty
• Brushed Stainless Steel: 7 Year Warranty
• Matte Black: 7 Year Warranty
• Brushed Gold: 7 Years Warranty
• Polished Rose Gold: 7 Years Warranty
• Gunmetel: 7 Years Warranty
• Made to Order Finishes: 5 Year Warranty
• Liquid Filled: 25 Years Warranty on Rail, 5 Years Warranty on Element

Thermorad In-Wall Towel Dryer

• 10 Year Warranty

Underfloor Heating

• Lifetime Warranty
• We are so confident of the quality of our German-made Thermonet Underfloor Heating that we give each system a warranty that lasts a Lifetime with 3 year warranty on our Thermostats.

Magnifying/Shaving/Make Up Mirrors

• 1 Year Warranty

Backlit Mirrors

• 3 Year Warranty

Timers

• 2 Year Warranty

For After Sales & Service enquiries you can contact Thermogroup directly on (02) 6953 4225 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Cold tiles on a winter morning? Warm floors are one of the best upgrades you can make while the tiles are up. The Thermogroup Thermowire Underfloor Heating Loose Wire Cable Kit and Thermostat suits small or awkwardly shaped floors, because the loose wire lets you set your own spacing. Route it around the toilet, vanity or shower base and dial in the heat output you want. The kit has the lot: Thermowire heating cable, black cloth tape for securing it to the substrate, a programmable thermostat (5220A), a floor sensor and conduit, a mat monitor and an installation guide. The cable is just 3.5mm thick with a low profile 4mm cold tail, so it sits neatly within the tile adhesive layer. Made in the UK, with a lifetime warranty on the cable and 3 years on the thermostat.

• Loose wire design fits around awkward spaces and lets you set your own cable spacing for the heat output you're after
• Kits run from 1 square metre through to 18 square metre, so you can match the run to your floor area
• IP68 protection rating, which means the system is safe for bathrooms, showers and other wet areas with no electrical hazard
• Slim 3.5mm cable and 4mm cold tail conceal within the tile adhesive layer, keeping floor height to a minimum
• Maximum temperature of 28 degrees, controlled through the programmable thermostat so you can set your heating schedule
• Lifetime warranty on the cable and a 3 year warranty on the thermostat for long-term peace of mind

For under tile jobs, we recommend 150w/m² outside the bathroom and 200w/m² in the bathroom, either below the tiles or the screed.

This is an electrical install, so have a licensed electrician handle the fit-off. Need a hand working out your square metres? Give us a call before you order.

Specifications

Greater efficiency can also be achieved by including by:

• Including a layer of insulation
• Splitting the heating into different zones
• Using a programmable thermostat to only have the heating on when you need it

There is a number of factors that will influence the efficiency and the running costs of your underfloor heating. This includes:

• The set temperature
• The size and design of the room/home
• Level of insulation
• External temperatures
• Flooring products used
• Your electricity tariff
• Length of time the floor heating is on
• If there is any other heat sources in the room

To get an estimated running cost use Thermogroup's running costs calculator.

What's In The Box

Thermowire loose wire underfloor heating cable
Programmable thermostat
Floor temperature sensor
Sensor conduit
Cloth installation tape
Installation guide & warranty form

Downloads

Download the specification sheet below:

Thermogroup Thermowire Underfloor Heating Loose Wire Cable Kit and Thermostat

Warranty

Thermogroup accessories are covered by 10 Year replacement product or parts*

The warranty period starts on the date of purchase, but the registration is only confirmed when the online warranty form has been complete and the registration details are submitted to the online warranty database in full, checked by Thermogroup and written confirmation is issued.

Heated Towel Rails, Ladders 

• Polished Stainless Steel: 10 Year Warranty
• Brushed Stainless Steel: 7 Year Warranty
• Matte Black: 7 Year Warranty
• Brushed Gold: 7 Years Warranty
• Polished Rose Gold: 7 Years Warranty
• Gunmetel: 7 Years Warranty
• Made to Order Finishes: 5 Year Warranty
• Liquid Filled: 25 Years Warranty on Rail, 5 Years Warranty on Element

Thermorad In-Wall Towel Dryer

• 10 Year Warranty

Underfloor Heating

• Lifetime Warranty
• We are so confident of the quality of our German-made Thermonet Underfloor Heating that we give each system a warranty that lasts a Lifetime with 3 year warranty on our Thermostats.

Magnifying/Shaving/Make Up Mirrors

• 1 Year Warranty

Backlit Mirrors

• 3 Year Warranty

Timers

• 2 Year Warranty

For After Sales & Service enquiries you can contact Thermogroup directly on (02) 6953 4225 for assistance.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

One spout, two jobs. The Caroma Urbane II Low Lead Round 180mm Basin/Bath Outlet in Brushed Brass works over a basin or a bath, so it suits plenty of setups whether you're replacing a tired old outlet or fitting out a new space. It's made from solid Low Lead brass, built to outlast years of daily use. The PVD brushed brass finish holds up over time and wipes clean with a cloth. A concealed aerator lets you adjust the stream direction, and there's an unrestricted aerator in the box for bath installations. WELS 6 star rated at 4.5 litres a minute, so it's kind to the water bill. Backed by a 20 year warranty: quality you can trust at a fair price.

• Suits both basin and bath, giving you flexibility across different fit-outs
• Solid Low Lead brass construction that stands up to years of use
• PVD brushed brass finish that lasts and cleans up with a simple wipe
• Concealed aerator with adjustable stream direction, so you can point the flow where you want it
• Unrestricted aerator included for bath installations, giving you the right flow for filling a bath
• Choose a 180mm or 220mm spout projection to match your basin or bath layout
• Sculptural, slim form that works with a modern bathroom, and yes, it looks good
• Also available in brushed nickel, gunmetal, matte black and chrome

Check your spout projection needs before ordering, or ask your plumber to confirm the right reach for your setup.

Team it with the matching Urbane II wall and shower mixers to keep your finishes consistent throughout the bathroom.

WELS & Watermark Certification

• WELS 6 star rated
• 4.5 LT/MIN
• WELS Registration No: T36480 (V)
  
• All Caroma Taps are Watermark Certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

Downloads

Download the installation instructions below:

Caroma Urbane II Low Lead Round 180mm Basin/Bath Outlet Brushed Brass

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Swapping tired wall tapware, or plumbing a fresh wall from scratch? The Caroma Liano II Low Lead Basin/Bath Outlet in Gunmetal covers both, working over a basin or a bath. It's built from durable low lead brass, so it's in for the long haul, and the superior 35mm ceramic disc cartridge keeps the control smooth and steady. The gunmetal finish is applied by PVD, which means it holds up well over time and wipes clean with a cloth. Pick between 175mm and 210mm spout projections to suit your basin or bath. Bath installations include an unrestricted aerator, while the concealed aerator lets you adjust the stream direction. It's WELS 6 star rated at 4.5 litres a minute too. Designed in Australia, the Liano II range keeps pace with current bathroom styling.

• Low lead brass construction for a spout that stands up to daily use and lasts
• Superior 35mm ceramic disc cartridge for reliable, precise flow control
• PVD gunmetal finish that resists wear and only needs a quick wipe to keep clean
• Two spout projections, 175mm and 210mm, so you can suit your basin or bath
• Concealed aerator with adjustable stream direction for a tidy look and practical use
• Unrestricted aerator included for bath installations
• Interchangeable trim kits let you change the colour or finish after installation, so you're not locked in to your current choice (compatible with the Caroma Urbane II and Liano II range only)

Changed your mind on colour down the track? That's what the trim kits are for.

Also available in chrome, matte black, brushed nickel and brushed brass.

Team it with the matching Caroma Urbane II Gunmetal bathroom accessories to keep your finishes consistent throughout the bathroom.

WELS & Watermark Certification

• WELS 6 star rated
• 4.5 LT/MIN
• WELS Registration No: T36557
• All Caroma Taps are Watermark Certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

• 1 x basin/bath outlet
• 1 x unrestricted aerator 
• 1 x in-wall kit

Downloads

Download the installation instructions below:

Caroma Liano II Low Lead Basin/Bath Outlet Gunmetal

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Need more room under the spout than a standard basin mixer gives you? The Caroma Urbane II Lead Free Mid Tower Basin Mixer in Chrome sits at a mid tower height, which suits standard basins and makes washing your hands easier. It's a practical swap for a tired basin tap, and a straight pick for a new bathroom. Inside, a lead free brass body and a 25mm ceramic disc cartridge do the hard yards, so drips stay away and maintenance stays low. Chrome wipes clean with a cloth. It's WELS 6 star rated at 4.5 litres a minute, so you save water without thinking about it. Australian designed and engineered, with a 20 year warranty behind it.

• WELS 6 star rating with a 4.5L/min flow rate, which keeps water and energy use down
• 25mm ceramic disc cartridge stops drips, so there's less fiddling over time
• Lead free brass body for safe, long-lasting construction
• European SoftPEX hoses for better durability, a longer life and no impurities in the water
• Concealed aerator with an adjustable stream direction, so you can point the flow where you want it
• Every tap is 100% leak tested before it leaves the factory, and the whole lot is backed by a 20 year warranty

Also available in Matte Black, PVD Brushed Nickel, PVD Brushed Brass and PVD Gunmetal.

Team it with the matching Urbane II Bathroom Collection to finish the look. Need a hand? Your plumber can confirm your basin tap hole before you order.

WELS & Watermark Certification

• WELS 6 star rated
• 4.5 LT/MIN
• WELS Registration No: T36464
  
• All Caroma Taps are Watermark Certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

Downloads

Download the installation instructions below:

Caroma Urbane II Lead Free Mid Tower Basin Mixer Chrome

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Filling a basin, or filling a bath? The Caroma Liano II Low Lead Basin/Bath Outlet in Brushed Brass does either, with clean, minimal lines to suit a modern bathroom. It's built from durable low lead brass, so it stands up to daily use. The concealed aerator lets you adjust the stream direction to suit, and an unrestricted aerator comes in the box for bath installations where you want a good flow. Inside, a 35mm ceramic disc cartridge keeps control smooth and reliable. Pick 175mm or 210mm spout projection to match your setup. WELS 6 star rated at 4.5 litres a minute, which is kind to the water bill. Australian designed by Caroma: quality you can trust at a fair price.

• Made from low lead brass for long-lasting, everyday durability
• Two spout projections available, 175mm and 210mm, so you can pick the right reach for your basin or bath
• Concealed aerator with adjustable stream direction for practical everyday use
• Includes an unrestricted aerator for bath installations where full flow matters
• 35mm ceramic disc cartridge for smooth, reliable operation
• PVD brushed brass finish that keeps its look and cleans easily with a cloth
• Interchangeable trim kits let you change the colour or finish after installation, so you're not locked into today's choice (interchangeable with the Caroma Urbane II and Liano II range only)

Check your spout projection needs against your basin or bath before ordering, or ask your plumber.

Also available in chrome, matte black, brushed nickel and gunmetal. Team it with the matching Caroma Urbane II Brushed Brass accessories range to keep your finishes consistent.

WELS & Watermark Certification

• WELS 6 star rated
• 4.5 LT/MIN
• WELS Registration No: T36557
• All Caroma Taps are Watermark Certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

• 1 x basin/bath outlet
• 1 x unrestricted aerator 
• 1 x in-wall kit

Downloads

Download the installation instructions below:

Caroma Liano II Low Lead Basin/Bath Outlet Brushed Brass

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Swapping a tired wall outlet, or plumbing a new bathroom from scratch? The Caroma Liano II Low Lead Basin/Bath Outlet in Brushed Nickel delivers water to your basin or bath, ready to pair with your chosen wall mixer. It's a clean, slimline fit for a modern bathroom. The body is durable Low Lead brass, so it stands up to daily use, and the PVD brushed nickel finish holds its look over the years. A quick wipe with a cloth keeps it clean. Inside sits a superior 35mm ceramic disc cartridge for smooth, reliable operation. It suits bath installations too. Best of all, Caroma's interchangeable trim system means you can update the finish down the track without pulling apart the wall.

• Made from Low Lead brass for long-lasting, durable construction you can trust
• PVD brushed nickel finish resists wear and wipes clean easily with a cloth
• Superior 35mm ceramic disc cartridge gives you smooth, dependable control
• Available in 175mm and 210mm spout projections, so you can match the reach to your basin or bath
• Includes an unrestricted aerator suited to bath installations
• Concealed aerator with adjustable stream direction for a tidy look and everyday practicality
• Interchangeable trim kits let you change the colour or finish after installation, so you're not locked into today's choice (interchangeable with the Caroma Urbane II and Liano II range only)
• Proudly Australian designed as part of the premium Liano II range

The finish can be updated later, but the trim is only interchangeable within the Caroma Urbane II and Liano II range, so check compatibility with your plumber before ordering.

Also available in chrome, matte black, brushed brass and gunmetal.

Team it with the matching Caroma Urbane II Brushed Nickel bathroom accessories to keep your finishes consistent throughout the bathroom.

WELS & Watermark Certification

• WELS 6 star rated
• 4.5 LT/MIN
• WELS Registration No: T36557
• All Caroma Taps are Watermark Certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

• 1 x basin/bath outlet
• 1 x unrestricted aerator 
• 1 x in-wall kit

Downloads

Download the installation instructions below:

Caroma Liano II Low Lead Basin/Bath Outlet Brushed Nickel

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Changing tapware without changing the plumbing? That's the appeal here. The Caroma Liano II Lead Free Wall Basin/Bath Mixer Plate Set in Chrome is wall-mounted and works over a basin or a bath, so it suits a straight swap or a new fit-out. The body's lead free brass, and inside sits a 35mm ceramic disc cartridge for smooth, reliable control. Chrome wipes clean with a cloth. The range runs on the Caroma Easy-Switch in-wall body, which means you can change handle styles or finishes later without opening the wall again. Future you will be grateful. Spout projections come in 175mm and 210mm. WELS 6 star rated at 4.5 litres a minute.

• Lead free brass body construction for a fitting that stands up to daily use over the years
• 35mm ceramic disc cartridge that gives you smooth, precise handling of flow and temperature
• Chrome finish that holds up well and wipes clean with a cloth
• Available in 175mm and 210mm spout projections, so you can match the reach to your basin or bath
• Unrestricted aerator included for bath installations, with a concealed aerator offering adjustable stream direction
• Interchangeable trim kits let you change the colour or finish after installation, so you're not locked into today's choice (compatible with the Caroma Urbane II and Liano II range only)
• Australian designed as part of the Liano II range

This is a wall-mounted set, so have your plumber confirm your in-wall rough-in before you order. Also available in matte black, brushed nickel, brushed brass and gunmetal.

Team it with the matching Caroma Urbane II bathroom accessories range to finish the look.

WELS & Watermark Certification

• WELS 6 star rated
• 4.5 LT/MIN
• WELS Registration No: T36769 (V)
• All Caroma Taps are Watermark Certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

• 2 x round cover plates
  
• 1 x basin/bath outlet
• 1 x mixer
• 1 x unrestricted aerator 
• 1 x in-wall kit

Downloads

Download the installation instructions below:

Caroma Liano II Lead Free Wall Basin/Bath Mixer Plate Set Chrome

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Filling a bath or a basin from the wall, without the mixer taking up bench space. That's the job of the Caroma Liano II Low Lead Basin/Bath Outlet in Matte Black, and it's a clean swap when you're updating tapware or fitting out a new bathroom. It's built from durable low lead brass, so it holds up to daily use. Inside, a 35mm ceramic disc cartridge gives you smooth, reliable control over the flow. An unrestricted aerator comes in the box for bath installations, and the concealed aerator lets you adjust the direction of the stream. It's WELS 6 star rated at 4.5 litres a minute. Australian designed by Caroma: quality you can trust at a fair price.

• Low lead brass construction stands up to years of everyday use
• 35mm ceramic disc cartridge for precise, dependable operation
• Matte black finish that lasts and wipes clean with a soft cloth
• Unrestricted aerator included, made for bath installations
• Concealed aerator with adjustable stream direction to suit your setup
• Choice of 175mm and 210mm spout projections so you can match your basin or bath
• Interchangeable trim kits let you change the colour or finish after installation, so you're not locked in (interchangeable with the Caroma Urbane II and Liano II range only)

Check the spout projection you need before ordering. Need a hand? Ask your plumber which suits your basin or bath.

Also available in chrome, brushed nickel, brushed brass and gunmetal. Team it with the matching Caroma Urbane II bathroom accessories range to complete the look.

WELS & Watermark Certification

• WELS 6 star rated
• 4.5 LT/MIN
• WELS Registration No: T36557
• All Caroma Taps are Watermark Certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

• 1 x basin/bath outlet
• 1 x unrestricted aerator 
• 1 x in-wall kit

Downloads

Download the installation instructions below:

Caroma Liano II Low Lead Basin/Bath Outlet Matte Black

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Swapping tired wall tapware, or plumbing a new bathroom from scratch? The Caroma Liano II Lead Free Wall Basin/Bath Mixer Set in Brushed Brass is made for wall-mounted basins and baths. Caroma is moving to lead free tapware ahead of the Australian standard that makes it mandatory at point of installation by 2025. Lead free tapware contains less than 0.25% lead, which is a healthier option for your home. The body's durable lead free brass, and the 35mm ceramic disc cartridge keeps the handle smooth and the control dependable. The PVD brushed brass finish stands up to daily use and wipes clean with a cloth. Australian designed, with a 20 year warranty behind it. That's a long time to not think about your tapware.

• Lead free brass body meets the new standard, so you're covered for installations from 2025 and get a healthier result at home
• Superior 35mm ceramic disc cartridge for smooth operation and long-term reliability
• Available in 175mm and 210mm spout projections, so you can match the reach to your basin or bath
• 6 star WELS rated (175mm) / 6 star WELS rated (210mm) at 4.5L/Min, which is kind to the water bill
• PVD brushed brass finish resists wear and cleans up with a simple wipe
• Includes an unrestricted aerator for bath installations, plus a concealed aerator with adjustable stream direction
• Interchangeable trim kits let you change the colour or finish after installation, so you're not locked into today's choice (interchangeable with the Caroma Urbane II and Liano II range only)
• Supported by a 20 year warranty for peace of mind

This set replaces part numbers 96352BB6A and 96344BB6A. Check your setup with your plumber before ordering to confirm the right spout projection.

Team it with the Caroma Urbane II Brushed Brass bathroom accessories range for a consistent finish throughout your bathroom.

Specifications

WELS water efficiency: 6 star WELS rated (175mm) / 6 star WELS rated (210mm)
WELS water consumption: 4.5L/Min (175mm) / 4.5L/Min (210mm)
WELS registration number: T36493 (175mm) / T36769 (210mm)
Watermark certification: All Caroma taps are watermark certified
Operating pressure: 150 - 500kPa
Construction material: Lead free brass
Finish/coating: PVD
Cartridge: 35mm Ceramic disc cartridge
Overall length: 165mm
Spout reach: 175mm
Fixing distance: 100mm
Round plate diametre: Ø 65mm
Warranty: 20 years

What's In The Box

2 x round cover plates
1 x basin/bath outlet
1 x mixer
1 x unrestricted aerator
1 x in-wall kit

Downloads

Download the installation instructions below:
Caroma Liano II Wall Basin/Bath Mixer Set Install

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

One wall fitting that can run a basin or a bath: handy when you're upgrading tired wall tapware or plumbing a new bathroom. The Caroma Liano II Low Lead Wall Basin/Bath Mixer Set in Chrome keeps things clean and slimline, so it sits well in a modern space. The body is lead-free brass for long-term durability, and the superior 35mm ceramic disc cartridge gives you smooth, reliable control of your water. Chrome holds up over the years and wipes clean with a cloth. It's WELS 6 star rated at 4.5 litres a minute. Best bit? Caroma's Easy-Switch in-wall system lets you swap handle styles or change the finish down the track without a full re-plumb. Available in chrome, matte black, brushed nickel, brushed brass and gunmetal.

• Lead-free brass body construction, so you get a solid fitting that lasts
• Superior 35mm ceramic disc cartridge for precise, drip-free operation
• Choice of 175mm or 210mm spout projections to match your basin or bath setup
• Includes an unrestricted aerator suited to bath installations, giving you a good fill rate
• Concealed aerator with adjustable stream direction, so you can aim the flow where you want it
• Interchangeable trim kits let you change the colour or finish after installation, so you're not locked in to today's choice (compatible with the Caroma Urbane II and Liano II range only)
• Australian designed, part of the premium Liano II range

Because this is a wall-mounted set, check your rough-in and spout height suit the basin or bath before ordering. Need a hand? Have your plumber confirm.

Team it with the matching Caroma Urbane II bathroom accessories range to finish the look.

WELS & Watermark Certification

• WELS 6 star rated
• 4.5 LT/MIN
• WELS Registration No: T36769 (V)
• All Caroma Taps are Watermark Certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

• 2 x round cover plates
  
• 1 x basin/bath outlet
• 1 x mixer
• 1 x unrestricted aerator 
• 1 x in-wall kit

Downloads

Download the installation instructions below:

Caroma Liano II Low Lead Wall Basin/Bath Mixer Set Chrome

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Filling a basin or a bath, and doing it neatly. That's the job of the Caroma Liano II Low Lead Basin/Bath Outlet in Chrome, whether you're replacing a worn spout or fitting out a new bathroom with a slimline look. It's built from durable Low Lead brass with a quality chrome finish that wipes clean with a cloth. Inside, a superior 35mm ceramic disc cartridge keeps the action smooth. It's WELS 6 star rated at 4.5 litres a minute, so it's kind to the water bill. Designed in Australia as part of the Liano II range, so it sits well with the rest of the collection.

• Made from Low Lead brass for a build that stands up to daily use
• Quality chrome finish that resists wear and is easy to keep clean with a quick wipe
• 35mm ceramic disc cartridge for smooth, dependable operation
• Concealed aerator with adjustable stream direction, plus an unrestricted aerator supplied for bath installs where you want a faster fill
• Choose from 175mm and 210mm spout projections to suit your setup
• Interchangeable trim kits let you change the colour or finish after installation, so you're not locked into today's choice (interchangeable with the Caroma Urbane II and Liano II range only)

Check your spout projection needs against 175mm and 210mm before ordering, or ask your plumber which suits your basin or bath. Also available in matte black, brushed nickel, brushed brass and gunmetal.

Pair with the matching Caroma Urbane II bathroom accessories range to complete the look.

WELS & Watermark Certification

• WELS 6 star rated
• 4.5 LT/MIN
• WELS Registration No: T36557
• All Caroma Taps are Watermark Certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

• 1 x basin/bath outlet
• 1 x unrestricted aerator 
• 1 x in-wall kit

Downloads

Download the installation instructions below:

Caroma Liano II Low Lead Basin/Bath Outlet Chrome

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

One mixer that runs a basin or a bath, mounted straight off the wall. That's the Caroma Liano II Low Lead Wall Basin/Bath Mixer Plate Set in Gunmetal, and it's a practical pick whether you're setting up new tapware or replacing something tired. The body is lead-free brass, so it's built for the long haul. Water flow runs through a superior 35mm ceramic disc cartridge, which keeps the handle smooth and the operation reliable. The PVD gunmetal finish is hard-wearing and comes clean with a wipe of a cloth. It's WELS 6 star rated at 4.5 litres a minute, so it's kind to the water bill. Designed in Australia, and it pairs neatly with the wider Caroma Liano II and Urbane II collections.

• Lead-free brass body construction that stands up to daily use over the long term
• Superior 35mm ceramic disc cartridge for smooth, dependable handle action
• Quality PVD gunmetal finish that lasts the test of time and wipes clean easily
• Choice of 175mm and 210mm spout projections, so you can match the reach to your setup
• Includes an unrestricted aerator for bath installations, plus a concealed aerator with adjustable stream direction
• Interchangeable trim kits let you change the colour or finish after installation, so you're not locked into today's choice (interchangeable with the Caroma Urbane II and Liano II range only), handy when you change your mind in five years
• Australian designed as part of the premium Liano II range

This is a wall-mounted set, so plan your in-wall rough-in before you order. Need a hand? Have your plumber confirm the setout.

Also available in chrome, matte black, brushed nickel, and brushed brass. Team it with the Caroma Urbane II Gunmetal bathroom accessories range for a consistent finish through your bathroom.

WELS & Watermark Certification

• WELS 6 star rated
• 4.5 LT/MIN
• WELS Registration No: T36769 (V)
• All Caroma Taps are Watermark Certified

Find out more about WELS and Watermark certification and the important role they play in helping you choose water-efficient and safe products that are manufactured to strict Australian plumbing and building standards.

What's In The Box

• 1 x round cover plate
  
• 1 x basin/bath outlet
• 1 x mixer
• 1 x unrestricted aerator 
• 1 x in-wall kit

Downloads

Download the installation instructions below:

Caroma Liano II Low Lead Wall Basin/Bath Mixer Plate Set Gunmetal

Warranty

Caroma products are covered by warranties of up to a Lifetime*

Caroma products are manufactured to the highest standard and in addition to the guarantees provided under the Australian Consumer Law, they offer extended warranty periods from the date of purchase or handover that their products are free from all defects in materials and workmanship, subject to the terms and conditions detailed on their website, for additional peace of mind.

Baths

• Bath shell – 20 Years
• Labour, replacement product or parts – 1 Year

Basins

• Basins – 20 year replacement product; 1 year parts & labour
• Basin Dress Rings – 5 year replacement product

Sinks & Tubs

• Sinks – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Urbane II Coloured Sinks with PVD Coating – 7 year replacement & labour
• Tubs – Lifetime replacement product or parts; 1 year replacement product/parts or labour
• Accessories & Spare parts – 1 year replacement product or parts

Showers

• 20 years cover for replacement product or parts only*
• 1 year cover for labour

*Excludes shower sliders, soap dishes, wall fixings, mounting brackets and metal flex hoses – 12 months parts only.

Taps, Outlets & Mixers

• 20 years cover for replacement product or parts only†
• 10 years cover for Tapware Engine* replacement parts only
• 1 year cover for labour, pull down/out hoses, spray heads and ceramic disc spindles

*Tapware Engine includes ceramic disc mixer cartridge, aerator and ultra flex pex hose.
†Excludes plastic jumper valves – 3 months parts only; copper jumper valves – 12 months parts only.

Finishes (Accessories, Showers, Taps, Outlets & Mixers)

• 20 years cover for PVD (Physical Vapour Deposition) product finish
• 20 years cover for Chrome product finish
• 10 years cover for all other product finishes

Toilets

• Toilet suites – 20 year replacement product*; 1 year parts & labour
• Toilet Seats – 1 year replacement product or parts
• Concealed Toilet Buttons – 5 year replacement product; 1 year parts & labour
• Electronic Bidet Seat – 2 year replacement product or parts (excludes consumable parts such as filters)

*Excludes inlet and outlet valve washers – 1 year parts and labour only.

Geberit Cisterns are covered by a 25 Year spare parts warranty and 15 Years on the tank and frames.

Accessibility/maintenance: the dual-flush plate acts as the button and provides the access required for servicing the internal parts of the cistern. For After Sales & Service enquiries you can contact Geberit directly on 1800 GEBERIT for assistance.

Wastes & Traps – 1 Year

Kitchen Accessories – 1 Year

Should any warranty claim be made and attended to by a Caroma authorised Service Agent and, in the opinion of the Service Agent or Caroma, the problem was from faulty installation, use of the products in conjunction with products of another manufacturer, or some other cause other than a manufacturing defect for which Caroma is responsible, Caroma Industries Limited reserves the right to charge a service fee for each service staff attending the premises where products have been installed.

For After Sales & Service enquiries you can contact Caroma directly on 13 14 16 for assistance.

To view the Caroma Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages