All Products

Old style bathroom with a shower that's seen better days? The Raymor Atlanta Wall Shower in Chrome is a fixed wall shower, arm and rose in one, with the classic Atlanta look that suits older homes and period style renovations. The rose sits on an adjustable ball joint, so you can angle the spray up, down or sideways without tools. Reach from the wall is 145mm, which keeps it tucked in on a smaller shower. It's brass under a bright chrome finish and connects with a half inch BSP female thread to a standard wall outlet. WELS 3 star rated at 9 litres a minute. Backed by a 20 year warranty on the brass body, arm, showerhead and chrome finish, with 1 year on seals and labour.

• Arm and rose in one piece, which makes it a quick swap for an old wall shower
• Adjustable ball joint so each person can angle the spray where they want it
• 145mm reach from the wall, so it suits a compact shower or over a bath
• Brass construction with a chrome finish that suits the Atlanta tapware range
• Half inch BSP female thread to fit the wall outlet you already have
• WELS 3 star at 9 litres a minute, which keeps water use reasonable
• 20 year warranty on the body, arm, head and chrome finish

Wall mounted onto a standard outlet. If your old shower is on a different fitting, ask your plumber before you buy.

Match it with Atlanta basin sets, spouts and wall top assemblies in Chrome for the full look.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S09842
Construction material: Brass
Inlet connection: 1/2in BSP Female
Overall width: 50 mm
Country of origin: China
Warranty: 20 Years main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide bracket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals and Labour

What's In The Box

• Wall shower
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Shower rose clogged and the arm still fine? The Raymor Alpha Shower Rose 225mm in Brushed Nickel is a rose only, so it goes onto your existing shower arm and leaves the plumbing alone. It's a round head, 225mm across, which gives a wide spread compared to the small roses in most older bathrooms. The face is ABS with a stainless steel backing plate, and a brass ball joint lets you angle it once it's fitted. Single function, so there's nothing to adjust. Rated WELS 3 star at 9 litres a minute. Backed by a 20 year warranty on the showerhead and 5 years on the brushed nickel electroplated finish, with 1 year on seals and labour.

• Rose only, so it fits your current arm and there's no need for new plumbing
• 225mm round face for a wide, even spread of water
• Brass ball joint that lets you tilt it to suit whoever's under it
• ABS rose with a stainless steel backing plate, so it holds its shape
• Brushed nickel finish that matches the Alpha hand shower and tapware
• WELS 3 star at 9 litres a minute, a solid flow that won't blow the water bill
• 20 year warranty on the showerhead, 5 years on the finish

Connects with a 1/2 inch BSP female thread to a standard shower arm. Ask your plumber if your arm's thread looks unusual.

Pair it with a Raymor shower arm, or the Alpha hand shower and mixers in Brushed Nickel.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18326
Construction material: ABS Rose. S/S backing. Brass ball joint
Inlet connection: 1/2" BSP Female
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Shower rose
• Install instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Overhead rose plumbed through the ceiling? The Raymor Shower Arm Ceiling Mount Straight Square Rail 300mm in Brushed Nickel hangs straight down from a ceiling outlet, giving you 300mm of drop to hang an overhead rose. Rose not included, so match it with any Raymor square head. The rail and flange are both square, which suits squared bathrooms and the Edge II range. It's brass, with a 1/2 inch BSP female thread at the ceiling and a 1/2 inch BSP male thread for the rose, so it fits a standard outlet. Backed by a 20 year warranty on the brass arm, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Chrome and Black.

• Straight ceiling arm with a 300mm reach for an overhead rose
• Square rail and square flange for a tidy look against the ceiling
• Arm only, sold without a rose, so you pick the head
• Brass construction that holds a heavy rose without drooping
• 1/2 inch BSP female inlet and male outlet for a standard connection
• Brushed nickel finish that matches Raymor roses in the same colour
• 20 year warranty on the brass arm

Needs a ceiling outlet, so talk to your plumber if you're moving the shower from the wall. Allow for ceiling height, as the rose hangs 300mm down plus its own depth.

Pair it with the Edge II 220mm shower rose or any Raymor square rose in the same finish.

Specifications

Construction material: Brass
Inlet connection: 1/2"BSP
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want a longer reach without moving the outlet? The Raymor Shower Arm Wall Mount Curved Round Rail in Chrome is the arm only, no rose, so you can pair it with whichever Raymor shower rose suits you. It mounts to the wall and curves out to a 361mm reach, which gets the rose well clear of the tiles. The rail and flange are both round, so it sits well with round roses and rounded tapware. It's solid brass with a 1/2 inch BSP female inlet at the wall and a 1/2 inch BSP male outlet for the rose. Backed by a 20 year warranty on the brass arm, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Brushed Nickel and Black.

• Arm only, sold without a rose, so you choose the head that suits your taste and price point
• Wall mounted with a curved profile for a 361mm reach from the wall
• Round rail and round flange to match round roses and softer tapware lines
• Solid brass construction that won't rust out at the wall
• 1/2 inch BSP female inlet and 1/2 inch BSP male outlet, so a standard rose screws straight on
• Chrome electroplated finish that matches Raymor roses in the same colour
• 20 year warranty on the brass arm

Comes with the wall flange and installation instructions. Ask your plumber to check the wall outlet height before you buy.

Team it with a Raymor Alpha or Edge II shower rose in the same finish.

Specifications

Construction material: Brass
Arm reach: 361 mm
Inlet connection: 1/2"BSP Female
Overall height: 254 mm
Overall width: 64 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want your shower rose straight overhead, rain style? The Raymor Shower Arm Ceiling Dropper with Round Flange 300mm in Chrome is a straight drop arm, no rose included, so you match it with a Raymor shower rose sold separately. It's a round tube with a round flange that sits flush to the ceiling, and it drops 300mm to put the rose at a comfortable height. Made from brass with a bright chrome finish, it connects with a half inch BSP female thread at the ceiling end, so it fits a standard outlet. Backed by a 20 year warranty on the brass arm and chrome finish, with 1 year on seals and labour.

• Ceiling mounted dropper, which puts the rose directly above you for a rain style shower
• 300mm drop that suits standard ceiling heights without the rose sitting too low
• Round tube with a round flange for a clean, tidy finish at the ceiling
• Brass body under a chrome finish that resists tarnish and wipes clean
• Half inch BSP female connection so it fits a standard ceiling outlet
• Arm only, sold without a rose, so you can pick the head size you want
• 20 year warranty on the brass arm and chrome finish

Ceiling mounted, so check you have a ceiling outlet or ask your plumber what's involved in adding one.

Pair it with a Raymor round shower rose, or see the square flange version if that suits your tiles better.

Specifications

Construction material: Brass
Overall height: 300 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Rail shower on the way out and the tiles behind it still good? The Raymor Winton Rail Shower in Brushed Nickel is a 25mm round brass rail, 720mm long, with a 3 function push button hand shower on a 1.5m PVC hose. The bracket adjusts up to 680mm between fixings, which means a fair chance of reusing the holes from your old rail. A soap dish comes in the box and moves along the rail to wherever you want it. The hand shower head is ABS with a 110mm face. WELS 3 star rated at 9 litres a minute. Backed by a 20 year warranty on the rail, hose, handpiece, slide bracket and soap dish, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Chrome and Black.

• Adjustable bracket spacing up to 680mm, so it can often go over the old fixing holes
• 720mm brass rail, 25mm round, giving plenty of travel for tall and short users
• 3 function hand shower with push button spray change that you can work one handed
• Soap dish in the box, adjustable along the rail
• 1.5m PVC hose with a 110mm ABS hand piece
• Brushed nickel finish that matches Winton mixers and spouts
• WELS 3 star at 9 litres a minute to keep water use down

Wall mounted with a 1/2 inch BSP female inlet for a standard outlet. Measure your existing bracket spacing before you order, or ask your plumber.

Team it with Winton basin mixers, wall mixers and sink mixers in the same finish.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18595
Construction material: Brass rail, ABS shower head and PVC hose
Spray options: 3 function
Rose size: 110mm
Rail length: 720mm
Rail size: 25mm
Hose length: 1.5m
Inlet connection: 1/2 BSP Female
Country of origin: China
Warranty: 20 Years main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide bracket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals and Labour

What's In The Box

• Rail Shower
• Soap dish
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want an overhead rose and a hand shower without a full re-plumb? The Raymor Sigma Dual Shower in Brushed Nickel runs an overhead rose and a hand shower off a single wall outlet, with a brass diverter to switch between them. The rail is brass, the hand shower and rose are ABS, and the hose is PVC. The hand shower has 3 spray functions and slides on the rail, while the top bracket adjusts to help line up with existing fixing holes. It's WELS 3 star rated at 9 litres a minute from either head. Backed by a 20 year warranty on the brass body, rail, hose, showerhead, handpiece, slide bracket and diverter, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Chrome and Black.

• Overhead rose plus hand shower on one rail, which gives you a proper drench or a targeted rinse
• Brass diverter to switch between heads, built to outlast a plastic one
• 3 function hand shower on a slider, so short and tall users each get the height they want
• Adjustable rail bracket that helps line up with existing tile holes
• Brass rail with an ABS rose and hand shower, plus a 1.5m PVC hose
• Brushed nickel finish that ties in with Sigma tapware and accessories
• WELS 3 star at 9 litres a minute from either head, so water use stays sensible whichever you pick

Wall mounted with a 1/2 inch BSP female inlet, so it connects to a standard shower outlet. Ask your plumber to check the outlet height before you order.

Match it with Sigma basin mixers, wall mixers and bath spouts in the same finish.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0/9.0 L/Min
WELS registration number: S18472
Construction material: Brass rail, PVC hose, ABS hand shower and slider
Spray options: 3 function
Rose size: 280 x 200mm
Arm reach: 360mm
Rail length: 1050mm
Rail size: 35 x 15mm
Hose length: 1.5m
Inlet connection: 1/2 BSP Female
Overall height: 1049 mm
Overall width: 280 mm
Country of origin: China
Warranty: 20 Years main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide bracket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals and Labour

What's In The Box

• Dual Shower
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Old shower arm rusted through at the wall? The Raymor Shower Arm Wall Right Angle Round in Chrome is a plain, straight round arm with a short bend at the end, which points your shower rose down over you rather than at the wall. It's the arm and wall flange only, no rose, so pick a Raymor shower rose to suit and buy it separately. Brass construction means it won't rust out the way an old steel arm can. Backed by a 20 year warranty on the brass arm, with 20 years on a chrome finish and 5 years on an electroplated finish, plus 1 year on seals and labour. Also available in Black.

• Straight round arm with a small downward bend at the tip, so the rose sits over your head
• Wall mounted with the flange included, which covers the old hole and finishes the job neatly
• Solid brass, so it won't rust out like older steel arms
• Chrome finish that wipes clean and matches Raymor roses in the same colour
• Arm only, so you can keep an existing rose or choose a new one
• Long reach that pushes the rose out into the shower rather than hugging the wall
• 20 year warranty on the brass arm, 5 years on electroplated finishes

Wall mounted onto a standard shower outlet. Ask your plumber to check the outlet height suits a longer arm.

Team it with a Raymor round shower rose, or see the curved and ceiling arms if you need a different reach.

Specifications

Construction material: Brass
Overall height: 105 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Adding a hand piece to the bath without calling a tiler? The Raymor Edge II Hand Shower in Brushed Nickel bundles a hand piece, 1.5m PVC hose and a combined inlet elbow and cradle in one kit. Because the elbow screws straight onto the outlet, there's no drilling into tiles, and the compact side cradle keeps everything tucked close to the wall. Tilt the cradle anywhere across 180 degrees and the spray lands where you need it. Three spray patterns change at the press of a button on the ABS hand piece. WELS 3 star rated at 9 litres a minute. Backed by a 20 year warranty on the wall elbow, hose and handpiece, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Chrome and Black.

• Drill free screw on fitting, which makes it a straight replacement for an old hand shower
• Inlet elbow and cradle in one piece, so there's only one fitting on the wall
• 180 degree tilt on the cradle to point the spray at kids, pets or the glass
• Push button ABS hand piece with three spray settings on a 1.5m PVC hose
• Compact side cradle that keeps the hand piece close to the wall
• Brushed nickel finish to match Edge II tapware, showers and accessories
• WELS 3 star at 9 litres a minute for a full spray without the waste

Fits a standard wall or bath outlet. Check the outlet is sound before you screw it on, or ask your plumber.

Edge II also does basin mixers, shower roses and accessories in the same finish.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18334
Construction material: Brass and zinc inlet and cradle. PVC hose. ABS hand shower
Hose length: 1.5m
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• 1 x Hand shower
• 1 x Inlet elbow and cradle
• 1 x 1.5m hose
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Straight arm, square look, no rose attached? The Raymor Shower Arm Wall Mount Right Angle Square Rail in Brushed Nickel is a plain right angle arm with a square profile, for a shower rose you buy separately. It comes off the wall square and holds the rose flat, which most people prefer for a straight down spray. The flange is square to match, covering the outlet neatly. The arm is brass with a 1/2 inch BSP female inlet at the wall and a 1/2 inch BSP male outlet for the rose. Backed by a 20 year warranty on the brass arm and 5 years on the brushed nickel electroplated finish, with 1 year on seals and labour.

• Right angle wall arm that holds the rose level for a direct spray
• Square rail and square flange, so it suits the Edge II rose and other square heads
• Rose not included, letting you choose the size and style you want
• Brass throughout for a fitting that lasts
• Standard 1/2 inch BSP female inlet and male outlet
• Brushed nickel electroplated finish to match Raymor square roses and tapware
• 20 year warranty on the brass arm, 5 years on the finish

Wall mounted with the flange in the box. Because it sits horizontal, check the outlet height gives clearance for the rose, or ask your plumber.

Team it with the Edge II 220mm rose and Edge II hand shower in Brushed Nickel.

Specifications

Construction material: Brass
Inlet connection: 1/2"BSP
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Bath outlet in need of a hand piece for rinsing the kids? The Raymor Alpha Hand Shower in Brushed Nickel is a hand piece kit with a round design that suits most bathrooms. The inlet elbow and cradle are one combined unit, so it screws onto the existing outlet with no drilling. The cradle tilts through 180 degrees to set the spray angle for anyone in the house. The hand piece is ABS with three spray settings on a push button, and it sits on a 1.5m PVC hose. WELS 3 star rated at 9 litres a minute. Backed by a 20 year warranty on the wall elbow, hose and handpiece, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Chrome and Black.

• Screw on install with no drilling, so it's a quick swap for a worn hand shower
• Combined inlet elbow and cradle that keeps the wall neat with one fitting
• Cradle adjusts through 180 degrees to suit tall, short or seated users
• Three spray settings on a push button for a rinse, a massage or a wider spray
• 1.5m PVC hose with an ABS hand piece and a brass and zinc wall fitting
• Round hand piece in a brushed nickel finish that suits Alpha tapware and most other ranges
• WELS 3 star at 9 litres a minute, easy on the water bill

Wall mounted onto a standard shower or bath outlet. Ask your plumber if you're unsure what thread you have.

Match it with Alpha basin mixers, showers and bath spouts in the same finish.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18333
Construction material: Brass and zinc inlet and cradle. PVC hose. ABS hand shower
Hose length: 1.5m
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• 1 x Hand shower
• 1 x Inlet elbow and cradle
• 1 x 1.5m hose
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Square rose needs a square arm to look right? The Raymor Shower Arm Wall Mount Curved Square Rail in Brushed Nickel is a wall mounted arm with a gentle curve that carries the rose forward and away from the tiles. Square rail, square flange, so it lines up with square roses and squared tapware like the Edge II range. It's the arm only, rose sold separately, which means you can pick the head size you want. Made from brass with a 1/2 inch BSP female inlet at the wall and a 1/2 inch BSP male outlet for the rose. Backed by a 20 year warranty on the brass arm and 5 years on the brushed nickel electroplated finish, with 1 year on seals and labour.

• Curved wall arm that brings the rose out from the wall for a better standing position
• Square rail and square flange to suit square roses
• Arm only, so you choose the Raymor rose that suits
• Brass construction for a long life in a wet room
• 1/2 inch BSP female inlet and male outlet, standard fittings your plumber will know
• Brushed nickel electroplated finish that matches the Edge II rose and hand shower
• 20 year warranty on the brass arm, 5 years on the finish

Wall mounted, supplied with the flange and installation instructions. Ask your plumber if the existing outlet is at a sensible height for a curved arm.

Add the Edge II 220mm shower rose in Brushed Nickel to complete the set.

Specifications

Construction material: Brass
Inlet connection: 1/2"BSP
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Shower rail slider snapped or the hose split again? The Raymor Sigma Rail Shower in Brushed Nickel is a square profile brass rail with a 3 function hand shower, PVC hose and a 200mm adjustable shelf that keeps the soap and shampoo off the floor. The slider twists to lock, so it stays where you set it instead of creeping down mid shower. Push button spray change means you can flick between settings one handed. The rail is 700mm long and wall mounted with a 1/2 inch BSP female inlet. WELS 3 star rated at 9 litres a minute. Backed by a 20 year warranty on the rail, hose, handpiece, slide bracket and soap dish, with 5 years on the brushed nickel electroplated finish and 1 year on seals and labour.

• 700mm square profile brass rail with a modern look that suits the Sigma range
• Twist and lock slider that holds the hand shower at the height you choose
• 3 function hand shower with push button spray change, easy to use with soapy hands
• 200mm adjustable shelf included, so your bottles have a home
• Brushed nickel electroplated finish over brass that wipes clean
• WELS 3 star at 9 litres a minute, a good flow without a big water bill
• 20 year warranty on the rail, hose, handpiece and slider, 5 years on the finish

Wall mounted with a 1/2 inch BSP female inlet, so it runs off a standard shower outlet. Ask your plumber if your existing fixing holes will line up.

Sigma also does a dual shower, basin mixers and wall mixers in Brushed Nickel.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18591
Construction material: Brass rail, PVC hose, ABS hand shower, slider and soap dish
Spray options: 3 function
Rail length: 700mm
Rail size: 35mm x 15mm
Inlet connection: 1/2 BSP Female
Overall height: 700 mm
Overall width: 200 mm
Country of origin: China
Warranty: 20 Years main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide bracket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals and Labour.

What's In The Box

• Rail Shower
• Soap dish
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Shower arm looking tired or weeping at the wall? The Raymor Rectangle Wall Curved Shower Arm in Chrome is the arm only, no rose, so you pair it with a Raymor shower rose sold separately. It mounts on the wall, with a rectangular body and a matching flange to cover the old hole. The gentle curve carries the rose forward over your head without a bulky elbow. It's made from brass in a two piece design, which makes lining it up on the wall easier for your plumber. Backed by a 20 year warranty on the brass arm, with 20 years on a chrome finish and 5 years on an electroplated finish, plus 1 year on seals and labour. Also available in Black.

• Arm and flange only, so you can pair it with whichever Raymor rose suits your bathroom
• Brass construction that holds up to years of hot water and steam
• Rectangular body and flange for a squared-off look that suits modern tiles
• Wall mounted with a curved profile that brings the rose out over you
• Two piece build, which makes it simpler for your plumber to fit and align
• Chrome finish that wipes clean, covered for 20 years on chrome and 5 years on electroplated colours
• Installation instructions in the box along with the flange

Wall mounted, and you'll need a Raymor shower rose to go with it. Ask your plumber to check the outlet position before you order.

Browse Raymor shower roses and the other wall and ceiling arms to build the shower you want.

Specifications

Construction material: Brass
Overall height: 285.7 mm
Overall width: 63.5 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Ensuite missing a hand shower for cleaning the screen? The Raymor Edge II Hand Shower in Black bundles a hand piece, 1.5m PVC hose and a combined inlet elbow and cradle in one kit. Because the elbow screws straight onto the outlet, there's no drilling into tiles, and the compact side cradle keeps everything tucked close to the wall. Tilt the cradle anywhere across 180 degrees and the spray lands where you need it. Three spray patterns change at the press of a button on the ABS hand piece. WELS 3 star rated at 9 litres a minute. Backed by a 20 year warranty on the wall elbow, hose and handpiece, with 20 years on a chrome finish and 5 years on black or brushed nickel. Also available in Chrome and Brushed Nickel.

• Drill free screw on fitting, which makes it a straight replacement for an old hand shower
• Inlet elbow and cradle in one piece, so there's only one fitting on the wall
• 180 degree tilt on the cradle to point the spray at kids, pets or the glass
• Push button ABS hand piece with three spray settings on a 1.5m PVC hose
• Compact side cradle that keeps the hand piece close to the wall
• Black finish to match Edge II tapware, showers and accessories
• WELS 3 star at 9 litres a minute for a full spray without the waste

Fits a standard wall or bath outlet. Check the outlet is sound before you screw it on, or ask your plumber.

Edge II also does basin mixers, shower roses and accessories in the same finish.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18334
Construction material: Brass and zinc inlet and cradle. PVC hose. ABS hand shower
Hose length: 1.5m
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• 1 x Hand shower
• 1 x Inlet elbow and cradle
• 1 x 1.5m hose
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Need something solid to hold onto beside the toilet or in the shower? The Raymor Care Grab Rail Straight 300mm in Brushed Stainless Steel is a straight 32mm rail in 304 grade stainless steel, made to meet AS 1428.1:2021, so it suits accessible bathrooms at home and commercial fit-outs alike. Clam flanges hide the screw heads, and 55mm of wall clearance leaves room for a firm grip. Overall width is 378mm across the flanges. Stainless steel screws and installation instructions come in the box. Backed by a 20 year warranty on mechanical parts for domestic installs, 7 years for commercial. Also available in Polished Stainless Steel.

• 304 grade stainless steel, so it won't corrode in a wet area
• 32mm rail with 55mm wall clearance for a full, comfortable hold
• Clam flange with a concealed mount, which hides the fixings from view
• Made to meet AS 1428.1:2021 for accessible home and commercial bathrooms, in a brushed stainless steel finish
• 20 year domestic warranty on mechanical parts, 7 years for commercial installs

Grab rails need solid fixing into noggins or a reinforced wall, so have your builder or plumber fit it and confirm the mounting height for your setup.

The Care range also covers longer straight rails, angled rails, shower seats, taps and toilets.

Specifications

Construction material: 304 Stainless Steel
Overall length: 378 mm
Projection: 87 mm
Height: 78 mm
Rail diameter: 32mm
Country of origin: Philippines
Warranty: 20 Years warranty on all mechanical parts for the original purchaser in domestic installations. A 7 Years warranty applies to commercial installations, irrespective of ownership.

What's In The Box

• Rail
• Stainless Steel Fixing Screws
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want the rose overhead instead of off the wall? The Raymor Ceiling Mount Straight Square Shower Arm 200mm in Chrome is the arm only, no head. It drops 200mm straight down from the ceiling, so the rose sits high and clear on a normal height ceiling. The arm is solid brass with a square profile that lines up with square roses and tapware, and it comes with the ceiling flange and installation instructions in the box. Just add a matching Raymor shower rose, sold separately. Backed by a 20 year warranty on the brass arm, with the finish covered for 20 years in Chrome and 5 years in Black, plus 1 year on seals and labour. Also available in Black, and in a 450mm drop.

• Arm only, so you pick the rose to suit
• Ceiling mount with a 200mm drop, which keeps the head high on standard ceilings
• Solid brass, so it won't sag or corrode behind the flange
• Straight square profile that matches square roses and mixers
• Chrome electroplated finish that wipes clean
• Flange and installation instructions in the box
• 20 year warranty on the brass arm, 1 year on seals and labour

Ceiling mounted, so your plumber needs access above the ceiling to bring the pipework through. Check the drop suits your ceiling height before ordering.

Pair it with the Raymor Edge II or Sigma square shower roses, or go for the 450mm version if you've got a high ceiling.

Specifications

Overall height: 206 mm
Overall width: 60 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Arm with Flange
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Two people, one towel rail, constant arguments? The Raymor Projix Double Towel Rail 630mm in Chrome gives you two bars side by side, so two towels hang flat and dry properly instead of bunching up on one. At 630mm wide it suits most bathrooms, and the 135mm projection keeps towels off the wall. The body is zinc alloy with a chrome finish on brass four-point fixings, and it's rated for commercial use too. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Black and Brushed Nickel.

• Two bars side by side, so a pair of towels dry properly instead of overlapping
• 630mm wide with a 135mm projection, which gives towels room to hang clear of the wall
• Zinc alloy body with a chrome finish that stands up to steam and daily use
• Brass four-point fixings for a rail that stays put when you tug a towel off it, at home or in commercial jobs
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted with four fixing points. Find studs or use the right anchors for plasterboard, and ask your plumber or handyman if you're not sure.

Match it with Projix single towel rails, robe hooks, roll holders and pin lever tapware in the same finish.

Specifications

Construction material: Zinc Die Cast
Overall length: 630 mm
Projection: 135 mm
Height: 62 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Towel Rail
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want a proper rain shower without changing the arm? The Raymor Lavas Round Shower Rose 300mm in Stainless Steel is the rose only, no arm, so it screws onto an existing wall or ceiling arm through a half inch BSP female connection. At 300mm across it gives a wide, even drench. The plate is stainless steel just 2mm thick, so it looks slim from below, with a brass connector at the back and a ball joint to angle it. Single function, with soft silicon nipples you rub to clear scale. WELS 3 star rated at 9 litres a minute. Backed by a 20 year warranty on the showerhead and brass connector, with 1 year on seals and labour.

• 300mm round face for a wide, rain style flow
• Ultra thin 2mm stainless steel plate that looks slim from underneath
• Brass connector with a ball joint, so you can tilt the spray
• Silicon nipples that let you rub off scale rather than scrub
• Half inch BSP female thread to fit a standard Raymor arm
• Stainless steel finish that shrugs off rust and steam
• WELS 3 star at 9 litres a minute, and a 20 year warranty on the head

Rose only, so you'll need a wall or ceiling arm. Check your arm suits a 300mm head, or ask your plumber.

Pair it with a Raymor ceiling dropper or wall arm, and see the Lavas tapware range for the matching look.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S18323
Construction material: Stainless Steel
Rose size: 300mm
Inlet connection: 1/2in BSP Female
Overall height: 57.8 mm
Overall width: 300 mm
Country of origin: China
Warranty: 20 Years Main brass body, wall elbow, shower arm, shower rail, PVC coated hose, showerhead, handpiece, slide balcket, diverter assembly, soap dish, and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years Seals and labour

What's In The Box

• Shower rose
• Install instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Nowhere to put your phone in the loo? The Raymor Edge II Toilet Roll Holder with Shelf in Chrome does two jobs in one: it holds the roll and gives you a small ledge on top for a phone or spare roll. The squared shape sits well next to square tapware. It's stainless steel with a chrome finish, and at 197mm wide, 80mm high and 120mm deep it fits most walls without getting in the way. Installation instructions come in the box. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes. Also available in Black and Brushed Nickel.

• Roll holder and shelf in one unit, so you get somewhere to rest a phone or spare roll
• Stainless steel body that won't rust in a damp toilet or ensuite
• Chrome finish that wipes clean and matches Edge II tapware and accessories
• 197mm wide with a 120mm projection, which keeps it clear of a swinging door
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes

Wall mounted. Check what's behind the wall before you drill, or leave it to your plumber or handyman.

Pair it with Edge II towel rails, robe hooks and tapware in the same finish.

Specifications

Construction material: Stainless Steel
Overall length: 197 mm
Projection: 120 mm
Height: 80 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes

What's In The Box

• 1 x Edge Roll Holder with Shelf
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Bottles and jars cluttering the edge of the bath? The Raymor Boston II Glass Shelf 530mm in Black gives you a proper spot for soap, moisturiser and a toothbrush cup above the basin or beside the bath. A glass shelf sits in a round brass rail, so it wipes clean and won't discolour. It's 530mm wide, 98mm high and 133mm deep, enough for a row of bottles. The rounded rail suits Boston II and other curved tapware. Backed by a 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour. Also available in Chrome and Brushed Nickel.

• Glass shelf on a brass rail, so bottles sit flat and the surface wipes clean
• 530mm wide and 133mm deep, which fits a row of full size bottles
• Round rail with a black finish that matches Boston II and other curved tapware
• Brass construction that holds its shape in a steamy bathroom
• 10 year warranty on the body and chrome finish, 5 years on electroplated finishes, 1 year on seals and labour

Wall mounted. Fix into studs or use proper anchors in tiles, and go easy on the weight. Ask your handyman or plumber if unsure.

Boston II also does towel rails, robe hooks, roll holders and tapware in the same three finishes.

Specifications

Construction material: Brass
Overall length: 530 mm
Projection: 133 mm
Height: 98 mm
Country of origin: China
Warranty: 10 Years main body, chrome plated finish and fittings. 5 Years PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• Shelf
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Bath and shower sharing one wall? The Raymor Alpha Bath/Shower Mixer with Diverter in Chrome lets one lever run both the bath spout and the shower, with a diverter to send water where you want it. The body is a one piece brass casting with four ports, so there are fewer joints to leak, and a 35mm ceramic disc cartridge under the paddle handle keeps control smooth. The handle is zinc die cast and everything visible is chrome plated. The wall plate measures 185mm by 65mm, which is handy for covering old tile cuts when you're replacing a set. Backed by a 20 year warranty on the body, cartridge, handle and chrome plated finish, with 1 year on seals and labour.

• Built-in diverter to switch between bath spout and shower head
• One piece brass body with four ports, which means fewer joins and less chance of a leak
• 35mm ceramic disc cartridge for smooth, reliable control
• Zinc die cast paddle handle that's easy to grip
• 185mm x 65mm wall plate that hides the hole from the old fitting
• Chrome plated finish to match Alpha spouts and showers
• 20 year warranty on the body, cartridge, spout, handle and chrome finish

Wall mounted. Ask your plumber to confirm the inwall connections before you buy, especially if you're switching from a three piece set.

Team it with an Alpha bath spout and shower, or the Alpha mixer without diverter for shower-only walls.

Specifications

Construction material: DZR Brass
Operating mechanism: Ceramic Disc
Overall height: 185 mm
Spout function: Fixed
Country of origin: China
Warranty: 20 Years mixer cartridge, mixer body, aerator, nylon braided TPSiV flexible hoses, spout, handle and chrome plated finish. 10 Years handpieces and pull down/out hoses, PVD and electroplate finishes. 1 Years seals and labour

What's In The Box

• 1 x Bath/shower mixer with diverter
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Wall taps over the laundry tub seized up? The Raymor Armada Lever Wall Top Assemblies in Chrome are the hot and cold wall taps only, with no spout, so you can replace the pair over a laundry tub, kitchen sink or bath and keep your existing outlet. The lever handles are easy to grip with wet or soapy hands and give the classic Armada look a modern edge. They're made from lead free brass with a chrome electroplated finish that handles steam and cleaning products. Backed by a 15 year warranty on the body, spindles, flanges, handles and fittings, with 5 years on the electroplated finish and 1 year on seals and labour. Pair them with an Armada spout and accessories to finish the room.

• Sold as a hot and cold pair, which swaps straight in for worn wall taps
• Lever handles that turn easily, even with wet hands or a weak grip
• Lead free brass body for safer water and a long service life
• Chrome electroplated finish that wipes clean and suits kitchen, laundry or bathroom
• No spout included, so you keep the outlet you already have or pick an Armada spout to match
• 15 year warranty on the body, spindles, flanges, handles and fittings, 5 years on the finish, 1 year on seals and labour

Wall mounted, for two wall breeches at standard spacing. Ask your plumber to confirm your breech spacing before you buy.

Match them with Armada spouts, basin sets, showers and accessories in Chrome.

Specifications

Lead free: Yes
Country of origin: China
Warranty: 15 years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings. 5 years PVD and electroplate finishes. 1 year Seals and labour.

What's In The Box

• 1 x set hot and cold taps
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Basin taps stiff, dripping or just dated? The Raymor Armada Lever Basin Top Assemblies in Chrome are a hob-mounted hot and cold tap pair, with no spout, for a basin, sink or tub that has separate tap holes. They suit a job where the existing spout is fine and only the taps need replacing, or where you're pairing them with a new Armada spout. Lever handles make them easy to turn with soapy hands, and the body is lead free brass with a chrome electroplated finish that copes with daily cleaning. Fine for bathroom, kitchen or laundry. Backed by a 15 year warranty on the body, spindles, flanges, handles and fittings, with 5 years on the electroplated finish and 1 year on seals and labour.

• Hot and cold taps only, which suits a swap where the spout stays in place
• Hob mounted, sitting on the benchtop or basin rather than the wall
• Lever handles for an easy turn, handy for kids and anyone with a weaker grip
• Lead free brass construction for safer drinking water and long life
• Chrome electroplated finish that resists tarnish and wipes clean
• Suits bathroom, kitchen and laundry, so one style can run through the house
• 15 year warranty on the body, spindles, flanges, handles and fittings, 5 years on the finish, 1 year on seals and labour

Hob mounted, for two tap holes at standard spacing. Measure your hole centres before you buy, and ask your plumber if anything looks unusual.

Add an Armada spout, or go the full Armada basin set, wall top assemblies and accessories in Chrome.

Specifications

Lead free: Yes
Country of origin: China
Warranty: 15 years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings. 5 years PVD and electroplate finishes. 1 year Seals and labour.

What's In The Box

• 1 x set hot and cold taps
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Old three piece bath set past saving? The Raymor Atlanta Bath Set in Chrome is the traditional three piece setup: separate hot and cold wall taps plus a 165mm fixed spout, for baths with three outlets on the wall. Cross handles in brass give it the classic look that suits older homes and period-style renovations. The bodies are DZR brass under a chrome plated finish, and the taps run on jumper valves, which means a drip is usually fixed with a new washer rather than a new tap. Flow is rated at 6.0 litres a minute. Backed by a 15 year warranty on the bodies, spout, flanges, handles and chrome finish, with 1 year on seals and jumper valves.

• Three piece set: hot tap, cold tap and 165mm fixed spout, so you replace the lot at once
• Brass cross handles that are easy to turn and suit a traditional bathroom
• DZR brass construction that resists corrosion for a long life
• Jumper valve spindles, so servicing is a low-cost washer swap
• Chrome plated finish that wipes clean and matches the Atlanta range
• 6.0 litres a minute flow at the spout
• 15 year warranty on body, spout, flanges, handles, fittings and chrome finish

Wall mounted, for baths with three tap holes. If you're going from a mixer to a set, or the other way, ask your plumber about the wall breeches.

Atlanta also does the matching wall top assemblies, spouts and washing machine stops in Chrome.

Specifications

WELS water consumption: 6.0 L/Min
Construction material: DZR Brass
Operating mechanism: Jumper Valve
Overall height: 61.5 mm
Spout reach: 165mm
Spout function: Fixed
Country of origin: China
Warranty: 15 Years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals, jumper valves and labour

What's In The Box

• 1 x Bath set
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Freestanding bath waiting on a filler? The Raymor Sturt Round Bath Filler with Hand Shower in Chrome is a floor-standing filler for freestanding baths, with the outlet sitting 976mm off the floor so it clears most bath rims. The 250mm gooseneck spout swivels, and a push pull diverter sends water to the hand shower for rinsing hair or washing the tub down. It's a DZR brass body with a zinc die cast paddle handle and a 40mm ceramic disc cartridge, and the shower hose is PVC coated with dual non return valves fitted. WELS 3 star at 9.0 litres a minute, so a bath fills at a decent pace. Backed by a 15 year warranty on the cartridge, 7 years on the body, spout and handle, and 2 years on seals, fittings and aerators.

• 250mm swivel gooseneck spout that reaches over the rim and swings clear when you're getting in
• Hand shower on a PVC coated hose for rinsing off or washing the bath down
• Push pull diverter to switch between spout and hand shower
• DZR brass body and 40mm ceramic disc cartridge, with a paddle handle for one-hand control
• Dual non return valves in the hose to protect your water supply from backflow
• WELS 3 star at 9.0 litres a minute for a quicker fill
• 15 year warranty on the cartridge, 7 years on body, spout and handle

Floor mounted, 976mm from floor to outlet centre. Your plumber needs the supply lines stubbed up through the floor beside the bath, so plan this before the floor is closed.

See the rest of the Raymor Sturt range in Chrome for matching basin and shower tapware.

Specifications

WELS water efficiency: 3 star
WELS water consumption: 9.0 L/Min
WELS registration number: S09705
Construction material: DZR Brass
Operating mechanism: Ceramic Disc
Spout function: Swivel
Country of origin: China
Warranty: 15 Years ceramic disc cartridge. 10 Years for commercial use. 7 Years body, spout, handle. 2 Years seals, tails, fittings, aerators. 1 Years finish, labour

What's In The Box

• 1 x Round bath filler with hand shower
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Bath spout stuck pointing the wrong way? The Raymor Raven Bath Wall Swivel Spout 220mm in Black is a straight swap for a wall-mounted bath spout, and the swivel means you can move it out of the way when you're wiping down the bath or bathing the kids. Rounded lines give it a softer look without any fuss. It's made from DZR brass with a black electroplated finish, so it stands up to steam and daily splashes. The 220mm reach clears the rim on most baths, and at 45mm high it sits low and tidy on the wall. Backed by a 15 year warranty on the body, spout, flanges and fittings, with 5 years on the electroplated finish and 1 year on seals and labour.

• DZR brass body, which resists dezincification so it lasts in Australian water
• Black electroplated finish that wipes clean and suits dark tapware
• Swivel function, so you can swing the spout clear of the bath when you need to
• 220mm reach for filling from the wall without water running down the tiles
• Rounded straight spout that matches the curves of the rest of the Raven range
• Wall mounted with a 45mm high body, so it sits close to the wall and out of the way
• 15 year warranty on the body, spout, flanges and fittings, 5 years on the finish, 1 year on seals and labour

Wall mounted, for a bath with an existing wall outlet. Ask your plumber to check the breech position before you order.

Pair it with the rest of the Raven range in Black, from wall mixers to basin tapware, for a matching bathroom.

Specifications

Construction material: DZR Brass
Overall height: 45 mm
Height to spout: 45mm
Spout reach: 220mm
Spout function: Swivel
Country of origin: China
Warranty: 15 Years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals, jumper valves and labour

What's In The Box

• 1 x Bath wall swivel spout
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want lever taps over the bath instead of the old cross handles? The Raymor Armada Quarter Turn Bath Set in Chrome is a three piece bath set with a modern twist: lever handles that turn a quarter of the way and stop, with the hot and cold rotating in opposite directions so both feel natural in the hand. Inside are ceramic disc spindles with flat sided assemblies rather than washers, so there's less to wear out. The 127mm aerated spout gives a softer stream at 6.0 litres a minute. Everything is DZR brass with a chrome plated finish. Backed by a 15 year warranty on the ceramic disc spindles, bodies, spout, flanges, handles, aerator and chrome finish, with 1 year on seals.

• Quarter turn lever handles, so full flow is one flick of the wrist
• Contra rotating hot and cold spindles, which means the levers move in mirror image and feel natural
• Ceramic disc spindles with flat sides in place of washers, for years of drip-free use
• 127mm aerated fixed spout that softens the stream and cuts splash
• DZR brass build under a chrome plated finish
• Flows at 6.0 litres a minute
• 15 year warranty covering spindles, body, spout, handles, aerator and the chrome finish

Wall mounted for baths with three tap holes. Ask your plumber to check the breech spacing matches your current set.

Match it with Armada tapware, showers and accessories for the rest of the room.

Specifications

WELS water consumption: 6.0 L/Min
Construction material: DZR Brass
Operating mechanism: Ceramic Disc
Overall height: 65 mm
Spout reach: 127mm
Spout function: Fixed
Country of origin: China
Warranty: 15 Years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals, jumper valves and labour.

What's In The Box

• 1 x Quarter turn bath set
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Bath spout dripping down the tiles? The Raymor Atlanta Bath Wall Spout 165mm in Chrome is a straight swap for an old wall spout over the bath, and a natural fit if you already have Atlanta taps on the wall. It's a fixed spout in DZR brass with a chrome plated finish, 165mm reach, and a 61mm flange that covers the hole in the tiles. The inlet is a 1/2 inch BSP female thread, which is the standard fitting for a wall breech. It's a plain fixed spout that does one job and keeps doing it. Backed by a 15 year warranty on the body, spout, flange, fittings and chrome finish, with 1 year on seals.

• DZR brass body that resists dezincification, so it lasts in Australian water
• 165mm reach that suits most standard baths
• 61mm flange to hide the tile cut-out behind it
• 1/2 inch BSP female thread for a standard wall connection
• Chrome plated finish that matches Atlanta wall tops and sets
• 15 year warranty on the body, spout, flange, fittings and chrome finish

Wall mounted, 54mm high at the wall. Your plumber will need a breech at the right height above the bath rim, so check it before ordering.

Pair it with Atlanta wall top assemblies, the Atlanta Bath Set or an Atlanta shower to keep the look consistent.

Specifications

Construction material: DZR Brass
Overall height: 54 mm
Height to spout: 54mm
Spout reach: 165mm
Spout function: Fixed
Country of origin: China
Warranty: 15 Years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals, jumper valves and labour

What's In The Box

• 1 x Bath wall spout
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Bath spout in the way every time you rinse the bath? The Raymor Sigma Bath Wall Swivel Spout 220mm in Black bolts onto the wall where your old spout was and swivels, so you can turn it aside for cleaning or push it back over the bath to fill. The soft square profile suits a modern bathroom and ties in with Sigma basins, showers and tapware. The body is DZR brass under a black electroplated finish, built for years of steam and splashes. It reaches 220mm from the wall and stands 55mm high, so it clears the bath rim without looking bulky. Backed by a 15 year warranty on the body, spout, flanges and fittings, 5 years on the electroplated finish and 1 year on seals and labour.

• Squared straight spout with soft edges, which suits a clean, modern bathroom
• DZR brass construction for a long working life in hard or soft water
• Black electroplated finish that resists marks from everyday use
• Swivel outlet, so the spout moves aside when you're scrubbing the bath
• 220mm reach from the wall for filling the bath without wetting the tiles
• 55mm high body that mounts flat to the wall with a tidy plate
• 15 year warranty on the body, spout, flanges and fittings, 5 years on the finish, 1 year on seals and labour

Wall mounted over the bath. Get your plumber to check the outlet height suits your bath before you order.

Sigma also does wall mixers, basin mixers, showers and baths in Black if you're doing the whole room.

Specifications

Construction material: DZR Brass
Overall height: 55 mm
Height to spout: 55mm
Spout reach: 220mm
Spout function: Swivel
Lead free: Not Required
Country of origin: China
Warranty: 15 Years ceramic disc SBAs, spindle SBAs, body, spout, flanges, handles, aerators, fittings and chrome plated finish. 5 Years PVD and electroplate finishes. 1 Years seals, jumper valves and labour

What's In The Box

• 1 x Bath wall swivel spout
• Installation Instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Spout over a shared basin always in the wrong spot? The Raymor Projix Swivel Basin or Bath Spout 220mm in Black is a wall spout that turns, so you can push it aside for scrubbing the bath or pull it over a basin bowl. The 220mm reach handles wider baths and basins set off the wall. It's lead free brass with an electroplated finish. Water use is WELS 6 star at 4.5 litres a minute with the fitted aerator, and a 5 star 6.0 litre aerator is included for extra flow. There's an open flow aerator in the box too, the one to fit over a bath. The 20 year warranty covers the spout and body, with 20 years on chrome and 5 years on other finishes. Also available in Chrome and Brushed Nickel.

• Swivel spout that moves side to side, so it's never in the way when cleaning
• 220mm reach to cover wide baths and basins that sit back from the wall
• Lead free brass body for safe drinking water
• Black electroplated finish that shrugs off water spots and daily wiping
• WELS 6 star at 4.5 litres a minute as fitted, with a 5 star 6.0 litre aerator supplied
• Open flow aerator included for filling a bath fast
• 20 year warranty on the spout and body, 20 years on chrome and 5 years on other finishes

Wall mounted, for 150 to 500kPa water pressure. A swivel spout needs clearance to turn, so check nothing's in its path, or ask your plumber.

Pair it with the Projix Flip wall mixer and angled swivel basin mixers, or see the fixed straight and curved 220mm spouts.

Specifications

WELS water efficiency: 6 star
WELS water consumption: 4.5 L/Min
WELS registration number: T46231
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Spout reach: 220mm
Spout function: Swivel
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Spout
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Basin bowl sitting well out from the wall? The Raymor Projix Straight Basin or Bath Spout 220mm in Black is the long reach version of the straight Projix spout. The extra 40mm over the 180mm model gets the water further into a wide bath or a basin set off the wall. It's a fixed, wall mounted spout in lead free brass with an electroplated finish. For water use it's WELS 6 star at 4.5 litres a minute with the fitted aerator, and a 5 star 6.0 litre aerator comes in the box for more flow at the basin. Over a bath, fit the included open flow aerator and it fills without the wait. The spout and body carry a 20 year warranty, with 20 years on chrome and 5 years on other finishes. Also available in Chrome and Brushed Nickel.

• 220mm reach that suits wider baths and basins set back from the wall
• Straight fixed outlet with no moving parts to loosen over time
• Lead free brass construction for safer drinking water
• Black electroplated finish to match the rest of the Projix range
• Fitted WELS 6 star 4.5 litre a minute aerator, plus a 5 star 6.0 litre aerator in the box
• Open flow aerator included for fast bath filling
• 20 year warranty on the spout and body, with 20 years on chrome and 5 years on other finishes

Wall mounted for 150 to 500kPa pressure. Measure from the finished wall to the centre of your bath or basin to pick between 180mm and 220mm, or ask your plumber.

Goes with the Projix Flip wall mixer, straight tower mixer and the 180mm straight spout for smaller basins.

Specifications

WELS water efficiency: 6 star
WELS water consumption: 4.5 L/Min
WELS registration number: T46235
Construction material: Lead-Free Brass
Operating pressure: 150 to 500kPa
Spout reach: 220mm
Spout function: Fixed
Lead free: Yes
Country of origin: China
Warranty: 20 years - Mixer Cartridge, Body, Aerator, Hoses, Spout, Handle and Chrome Finish. 10 years - Handpieces and pull-down hoses. 5 years - PVD and Electroplate finishes. 1 year - Seals and Labour.

What's In The Box

• 1 x Spout
• Fixing kit
• Installation instructions

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.