All Products

Need a tall mixer for a bowl basin? The Phoenix Arlo Vessel Mixer 6 Star in Matte Black is the tall version of the Arlo basin mixer, made for above-counter basins that sit on the bench rather than in it. The extended body brings the spout up to 242mm high with a 193mm reach, so it clears the rim of a bowl basin. It's WELS 6 star rated at 4.5 litres a minute, built from lead free brass, and runs a 25mm ceramic cartridge with a 15 year warranty. The handle has coloured hot and cold markers. Made in Vietnam. Warranty on the rest is 7 years on parts, 1 year on the finish and 1 year on labour. Also available in Chrome.

• Extended 242mm body height so the spout reaches over an above-counter basin
• 193mm reach that lands water in the middle of a bowl, not on the rim
• WELS 6 star at 4.5 litres a minute to keep water use down
• Lead free brass construction
• 25mm ceramic cartridge covered for 15 years
• Matte black finish, with hot and cold marked in colour on the handle
• 7 years on parts, 12 months on finish and labour

Hob mounted through a single hole in the bench. Check your basin height against the 242mm spout before you buy.

Inset basin instead? The Arlo Basin Mixer 6 Star is the shorter match.

Specifications

WELS water efficiency: 6 star
WELS registration number: T41165
Watermark certification: WM-022686
Construction material: Brass
Finish/coating: Matte Black
Dimensions: 50 x 193 x 242 mm (W x D x H)
Country of origin: Vietnam
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 1 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a tall kitchen mixer that goes easy on the water bill? The Phoenix Arlo Sink Mixer 6 Star 200mm Gooseneck in Brushed Nickel is the water saving version of the Arlo gooseneck: WELS 6 star rated at 4.5 litres a minute, so it uses less than the standard model with the same look and the same reach. The high arched spout swivels 360 degrees to clear the sink, and coloured hot and cold indicators sit on the handle. It's lead free brass with a 35mm ceramic cartridge, 374mm tall and 237mm from centre to spout end. Designed in Australia and made in Vietnam. Covered by 15 years on the cartridge, 7 years on parts, 1 year on the finish and 1 year on labour. Also available in Chrome, Matte Black and Brushed Gold.

• WELS 6 star at 4.5 litres a minute, which cuts water use every time you rinse
• 360 degree swivel gooseneck for reaching both bowls and clearing tall pots
• Lead free brass construction for safer water from the kitchen tap
• 35mm ceramic cartridge backed by a 15 year warranty
• 374mm high with a 237mm reach to suit most kitchen sinks
• Brushed nickel finish with coloured hot and cold indicators on the handle
• 7 year parts warranty, 1 year finish and labour

Single tap hole, hob mounted. Have your plumber check the flow suits your hot water system before the switch.

The Arlo range also includes a basin mixer and a vessel mixer in matching finishes.

Specifications

WELS water efficiency: 6 star
WELS registration number: T41164
Watermark certification: WM-022686
Construction material: Brass
Finish/coating: Brushed Nickel
Dimensions: 99 x 237 x 374 mm (W x D x H)
Country of origin: Vietnam
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 1 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want the square kitchen tap but with a lighter touch on the water? The Phoenix Teva Sink Mixer 200mm 6 Star Squareline in Chrome is the water saving take on the Teva sink mixer: WELS 6 star at 4.5 litres a minute, rather than the standard flow of its sibling. Same square body, same 360 degree swivel spout, same 305mm height and 245mm reach. Hot and cold are marked in colour on the lever. Built in lead free brass with a 35mm ceramic cartridge that carries a 15 year warranty. Made in Vietnam. Parts are covered for 7 years, the finish for 1 year and labour for 1 year. Also available in Brushed Nickel.

• WELS 6 star at 4.5 litres a minute, which is the difference between this and the standard Teva sink mixer
• Square body and spout for kitchens with straight lines
• Full 360 degree swivel to clear the sink or reach the second bowl
• Lead free brass body
• 35mm ceramic cartridge backed for 15 years
• Chrome finish with coloured hot and cold markers on the handle
• Parts covered for 7 years, 1 year on the finish and on labour

Single tap hole, hob mounted. Check your hot water system is happy with a 4.5 litre a minute tap, and ask your plumber if unsure.

Match it with the Teva Basin Mixer 6 Star and Teva showers for the rest of the house.

Specifications

WELS water efficiency: 6 star
WELS registration number: T41940
Watermark certification: WMK26040
Construction material: Brass
Finish/coating: Chrome
Dimensions: 100 x 245 x 305 mm (W x D x H)
Country of origin: Vietnam
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 1 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Bowl basin on the bench and a square look to match? The Phoenix Teva Vessel Mixer 6 Star in Chrome is the extended height version of the Teva basin mixer, made to stand beside an above-counter basin and reach over its rim. It's 266mm high with a 212mm reach, and still only 52mm wide. The square body is lead free brass and it carries a 25mm ceramic cartridge with a 15 year warranty. WELS 6 star at 4.5 litres a minute, so the tall tap doesn't mean more water. Coloured hot and cold markers on the lever. Made in Vietnam. Parts are covered for 7 years, finish for 1 year, labour for 1 year. Also available in Matte Black.

• 266mm tall body for above-counter and bowl basins
• 212mm reach that puts the water in the bowl, not on the bench
• WELS 6 star at 4.5 litres a minute
• Lead free brass body, 52mm wide
• 25mm ceramic cartridge backed by 15 years of warranty
• Chrome finish and colour coded hot and cold indicators
• Backed by 7 years on parts and 1 year on finish and labour

Mounts through one hole in the bench beside the basin. Measure the basin rim height against the 266mm spout first.

Pair it with the Teva 6 Star sink mixer in the kitchen for a matched set.

Specifications

WELS water efficiency: 6 star
WELS registration number: T41936
Watermark certification: WMK26040
Construction material: Brass
Finish/coating: Chrome
Dimensions: 52 x 212 x 266 mm (W x D x H)
Country of origin: Vietnam
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 1 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

After a gooseneck with a 6 star rating? The Phoenix Arlo Sink Mixer 6 Star 200mm Gooseneck in Brushed Gold is the water saving version of the Arlo gooseneck: WELS 6 star rated at 4.5 litres a minute, so it uses less than the standard model with the same look and the same reach. The high arched spout swivels 360 degrees to clear the sink, and coloured hot and cold indicators sit on the handle. It's lead free brass with a 35mm ceramic cartridge, 374mm tall and 237mm from centre to spout end. Designed in Australia and made in Vietnam. Covered by 15 years on the cartridge, 7 years on parts, 1 year on the finish and 1 year on labour. Also available in Chrome, Matte Black and Brushed Nickel.

• WELS 6 star at 4.5 litres a minute, which cuts water use every time you rinse
• 360 degree swivel gooseneck for reaching both bowls and clearing tall pots
• Lead free brass construction for safer water from the kitchen tap
• 35mm ceramic cartridge backed by a 15 year warranty
• 374mm high with a 237mm reach to suit most kitchen sinks
• Brushed gold finish with coloured hot and cold indicators on the handle
• 7 year parts warranty, 1 year finish and labour

Single tap hole, hob mounted. Have your plumber check the flow suits your hot water system before the switch.

The Arlo range also includes a basin mixer and a vessel mixer in matching finishes.

Specifications

WELS water efficiency: 6 star
WELS registration number: T41164
Watermark certification: WM-022686
Construction material: Brass
Finish/coating: Brushed Gold
Dimensions: 99 x 237 x 374 mm (W x D x H)
Country of origin: Vietnam
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 1 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Renovating a kitchen to a 6 star tap standard? The Phoenix Teva Sink Mixer 200mm 6 Star Squareline in Brushed Nickel is the water saving take on the Teva sink mixer: WELS 6 star at 4.5 litres a minute, rather than the standard flow of its sibling. Same square body, same 360 degree swivel spout, same 305mm height and 245mm reach. Hot and cold are marked in colour on the lever. Built in lead free brass with a 35mm ceramic cartridge that carries a 15 year warranty. Made in Vietnam. Parts are covered for 7 years, the finish for 1 year and labour for 1 year. Also available in Chrome.

• WELS 6 star at 4.5 litres a minute, which is the difference between this and the standard Teva sink mixer
• Square body and spout for kitchens with straight lines
• Full 360 degree swivel to clear the sink or reach the second bowl
• Lead free brass body
• 35mm ceramic cartridge backed for 15 years
• Brushed nickel finish with coloured hot and cold markers on the handle
• Parts covered for 7 years, 1 year on the finish and on labour

Single tap hole, hob mounted. Check your hot water system is happy with a 4.5 litre a minute tap, and ask your plumber if unsure.

Match it with the Teva Basin Mixer 6 Star and Teva showers for the rest of the house.

Specifications

WELS water efficiency: 6 star
WELS registration number: T41940
Watermark certification: WMK26040
Construction material: Brass
Finish/coating: Brushed Nickel
Dimensions: 100 x 245 x 305 mm (W x D x H)
Country of origin: Vietnam
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 1 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Swapping the sink tap because the old one wastes water? The Phoenix Arlo Sink Mixer 6 Star 200mm Gooseneck in Matte Black is the water saving version of the Arlo gooseneck: WELS 6 star rated at 4.5 litres a minute, so it uses less than the standard model with the same look and the same reach. The high arched spout swivels 360 degrees to clear the sink, and coloured hot and cold indicators sit on the handle. It's lead free brass with a 35mm ceramic cartridge, 374mm tall and 237mm from centre to spout end. Designed in Australia and made in Vietnam. Covered by 15 years on the cartridge, 7 years on parts, 1 year on the finish and 1 year on labour. Also available in Chrome, Brushed Gold and Brushed Nickel.

• WELS 6 star at 4.5 litres a minute, which cuts water use every time you rinse
• 360 degree swivel gooseneck for reaching both bowls and clearing tall pots
• Lead free brass construction for safer water from the kitchen tap
• 35mm ceramic cartridge backed by a 15 year warranty
• 374mm high with a 237mm reach to suit most kitchen sinks
• Matte black finish with coloured hot and cold indicators on the handle
• 7 year parts warranty, 1 year finish and labour

Single tap hole, hob mounted. Have your plumber check the flow suits your hot water system before the switch.

The Arlo range also includes a basin mixer and a vessel mixer in matching finishes.

Specifications

WELS water efficiency: 6 star
WELS registration number: T41164
Watermark certification: WM-022686
Construction material: Brass
Finish/coating: Matte Black
Dimensions: 99 x 237 x 374 mm (W x D x H)
Country of origin: Vietnam
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 1 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Basin sits on top of the vanity and the old tap can't reach? The Phoenix Arlo Vessel Mixer 6 Star in Chrome is the tall version of the Arlo basin mixer, made for above-counter basins that sit on the bench rather than in it. The extended body brings the spout up to 242mm high with a 193mm reach, so it clears the rim of a bowl basin. It's WELS 6 star rated at 4.5 litres a minute, built from lead free brass, and runs a 25mm ceramic cartridge with a 15 year warranty. The handle has coloured hot and cold markers. Made in Vietnam. Warranty on the rest is 7 years on parts, 1 year on the finish and 1 year on labour. Also available in Matte Black.

• Extended 242mm body height so the spout reaches over an above-counter basin
• 193mm reach that lands water in the middle of a bowl, not on the rim
• WELS 6 star at 4.5 litres a minute to keep water use down
• Lead free brass construction
• 25mm ceramic cartridge covered for 15 years
• Chrome finish, with hot and cold marked in colour on the handle
• 7 years on parts, 12 months on finish and labour

Hob mounted through a single hole in the bench. Check your basin height against the 242mm spout before you buy.

Inset basin instead? The Arlo Basin Mixer 6 Star is the shorter match.

Specifications

WELS water efficiency: 6 star
WELS registration number: T41165
Watermark certification: WM-022686
Construction material: Brass
Finish/coating: Chrome
Dimensions: 50 x 193 x 242 mm (W x D x H)
Country of origin: Vietnam
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 1 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Kitchen tap looking tired next to a new benchtop? The Phoenix Arlo Sink Mixer 200mm Gooseneck in Brushed Gold is a tall swivel mixer for a kitchen or laundry sink with one tap hole. The spout turns a full 360 degrees, so you can push it clear to wash a big tray or swing it over a double bowl. Soft angles and coloured hot and cold markers on the handle keep it simple to use. The body is lead free brass, and the 35mm ceramic cartridge is covered for 15 years. It stands 374mm high with a 237mm reach, and is WELS 4 star rated. Designed in Australia, made in Vietnam. Warranty is 15 years on the cartridge, 7 years on parts, 1 year on the finish and 1 year on labour.

• 360 degree swivel spout, so it moves out of the way of pots and trays
• Lead free brass body for a kitchen tap you fill the kettle from
• 35mm ceramic cartridge with a 15 year warranty for smooth control
• 374mm tall with a 237mm reach, which suits a deep or double bowl sink
• WELS 4 star rated, with coloured hot and cold indicators on the handle
• Brushed gold finish, designed in Australia
• 7 year parts warranty, 1 year on finish and labour

Suits a sink or bench with a single tap hole. Ask your plumber to check the hose length to your stops.

Want to use less water? The Arlo Sink Mixer 6 Star is the same tap rated at 4.5 litres a minute.

Specifications

WELS water efficiency: 4 star
WELS registration number: T29178
Watermark certification: WM-022686
Construction material: Brass
Finish/coating: Brushed Gold
Dimensions: 99 x 237 x 374 mm (W x D x H)
Country of origin: Vietnam
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 1 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Short on bench depth behind the basin? The Phoenix Arlo Basin Mixer 6 Star in Brushed Gold is a compact single lever basin mixer rated WELS 6 star at 4.5 litres a minute. The spout is angled to throw water further into the bowl, so you get a useful stream from a tap that stands only 152mm high and 50mm wide. Hot and cold are marked in colour on the handle. It's made from lead free brass with a 25mm ceramic cartridge, which is warranted for 15 years. Made in Vietnam. The rest of the warranty is 7 years on parts, 1 year on the finish and 1 year on labour. Also available in Matte Black.

• WELS 6 star at 4.5 litres a minute, so it saves water at the tap you use most
• Angled spout that pushes water further out over the basin
• Lead free brass body for a tap you brush your teeth under
• 25mm ceramic cartridge with a 15 year warranty
• 152mm high and 145mm deep, which fits most vanity basins
• Brushed gold finish with coloured hot and cold indicators
• Parts covered for 7 years, finish and labour for 1 year each

Hob mounted for a basin with one tap hole. Measure the hole size before you order.

Got an above-counter basin? Step up to the taller Arlo Vessel Mixer 6 Star.

Specifications

WELS water efficiency: 6 star
WELS registration number: T41165
Watermark certification: WM-022686
Construction material: Brass
Finish/coating: Brushed Gold
Dimensions: 50 x 145 x 152 mm (W x D x H)
Country of origin: Vietnam
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 1 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want a tall kitchen mixer that goes easy on the water bill? The Phoenix Arlo Sink Mixer 6 Star 200mm Gooseneck in Chrome is the water saving version of the Arlo gooseneck: WELS 6 star rated at 4.5 litres a minute, so it uses less than the standard model with the same look and the same reach. The high arched spout swivels 360 degrees to clear the sink, and coloured hot and cold indicators sit on the handle. It's lead free brass with a 35mm ceramic cartridge, 374mm tall and 237mm from centre to spout end. Designed in Australia and made in Vietnam. Covered by 15 years on the cartridge, 7 years on parts, 1 year on the finish and 1 year on labour. Also available in Matte Black, Brushed Gold and Brushed Nickel.

• WELS 6 star at 4.5 litres a minute, which cuts water use every time you rinse
• 360 degree swivel gooseneck for reaching both bowls and clearing tall pots
• Lead free brass construction for safer water from the kitchen tap
• 35mm ceramic cartridge backed by a 15 year warranty
• 374mm high with a 237mm reach to suit most kitchen sinks
• Chrome finish with coloured hot and cold indicators on the handle
• 7 year parts warranty, 1 year finish and labour

Single tap hole, hob mounted. Have your plumber check the flow suits your hot water system before the switch.

The Arlo range also includes a basin mixer and a vessel mixer in matching finishes.

Specifications

WELS water efficiency: 6 star
WELS registration number: T41164
Watermark certification: WM-022686
Construction material: Brass
Finish/coating: Chrome
Dimensions: 99 x 237 x 374 mm (W x D x H)
Country of origin: Vietnam
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 1 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing a wall set and want to future-proof the finish? The Phoenix Vask SwitchMix Wall Basin / Bath Mixer Set 200mm Pin Up in Brushed Nickel is a wall mounted mixer with a pin lever and a 200mm spout, in a rounded shape that suits timber vanities and plain tiles. This is the complete kit: the SwitchMix rough-in body for inside the wall and the fit-off set outside. The body stays, and a different Phoenix SwitchMix fit-off can go on later without touching the tiles. Lead free brass, push fit spout, backplates matched for diameter and depth. It measures 191.5mm wide, 218mm deep and 111.5mm high, and is WELS 5 star rated. Made in China. Warranty runs 15 years on the cartridge, 7 years on parts and finish, 1 year on labour. Also available in Chrome and Brushed Gold.

• Complete kit: rough-in body and fit-off set in the one box for a new install
• SwitchMix body, which means a new finish later is a fit-off swap, not a rebuild
• Lead free brass composition, right for a tap over a basin you drink from
• 200mm spout reach, so it clears a basin or sits well over a bath
• WELS 5 star rated, so a wall set over the basin doesn't run up the water bill
• Brushed nickel finish with 7 years of finish warranty
• Cartridge covered for 15 years, parts for 7 and labour for 1

Wall mounted. Your plumber sets the rough-in depth to suit your wall build-up, so have the tile thickness handy.

Already have the body in the wall? The Vask 200mm Pin Up Fit-Off Kit is the trim on its own.

Specifications

WELS water efficiency: 5 star
WELS registration number: T44775
Watermark certification: WMK25986
Construction material: Brass
Finish/coating: Brushed Nickel
Dimensions: 191.5 x 218 x 111.5 mm (W x D x H)
Country of origin: China
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 7 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Building a bathroom where the shower and bath share one wall? The Phoenix Teel SwitchMix Shower / Bath Diverter Mixer in Brushed Nickel is a slim, fine-lined mixer that sets the temperature and sends water to the shower or the bath spout. You get the complete kit in the box: the SwitchMix rough-in body for inside the wall plus the fit-off kit with the backplate, handle and trim. The rough-in stays put, and if you ever want a different look you fit a new SwitchMix fit-off kit from the front, no demolition. It's brass throughout with a solid brass backplate and a ceramic 180 degree diverter, 62mm wide, 109mm deep and 180mm high. Made in China. Backed by 15 years on the cartridge, 7 years on parts and finish and 1 year on labour. Also available in Brushed Carbon.

• Rough-in body and fit-off kit together in one box, ready for a new install or a full replacement
• SwitchMix design, so a future refresh is a new fit-off kit rather than a new wall
• Ceramic 180 degree diverter that moves water between two outlets with a half turn
• Slim 62mm wide body in brass with a solid brass backplate
• Brushed nickel finish backed by a 7 year finish warranty
• 15 year cartridge warranty, 7 years on parts, 1 year on labour
• WaterMark certified, made in China

Wall mounted. Your plumber will set the rough-in depth to suit your tile and sheet build-up, so check it before the wall is closed.

If you already have a SwitchMix diverter body in the wall, the Teel Fit-Off Kit on its own is all you need.

Specifications

Watermark certification: WMK25986
Construction material: Brass
Finish/coating: Brushed Nickel
Dimensions: 62 x 109 x 180 mm (W x D x H)
Country of origin: China
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 7 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fitting out a new shower over the bath? The Phoenix Mekko SwitchMix Shower / Bath Diverter Mixer in Brushed Carbon has a soft-edged handle and a built-in diverter: one way for the shower, the other for the bath. The box holds the complete kit, the SwitchMix rough-in body for the wall and the fit-off kit, which is the plate, handle and trim you see. Because the body is SwitchMix, you can swap the fit-off for another SwitchMix collection or finish later without cutting the tiles. Solid brass backplate, ceramic 180 degree rotary diverter, 65mm wide, 122mm deep and 178mm high. Made in China. Warranty is 15 years on the cartridge, 7 years on parts and finish, 1 year on labour. Also available in Chrome.

• Complete kit with the in-wall rough-in body and the visible fit-off kit, so your plumber has everything in one box
• SwitchMix body, which lets you change the handle and plate later without opening the wall
• Ceramic 180 degree rotary diverter to swap between the shower and the bath spout with one turn
• Solid brass backplate for a firm, long lasting fix to the wall
• Brushed carbon finish covered by a 7 year finish warranty
• 15 year cartridge warranty, 7 years on parts and 1 year on labour
• WaterMark certified and 65 x 122 x 178mm overall

Wall mounted, for use with a separate shower outlet and bath spout. Ask your plumber to confirm the rough-in depth before the tiles go on.

It shares the SwitchMix system with other Phoenix collections such as Teel, so the fit-offs can be swapped between them.

Specifications

Watermark certification: WMK25901
Construction material: Solid brass backplate
Finish/coating: Brushed Carbon
Dimensions: 65 x 122 x 178 mm (W x D x H)
Country of origin: China
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 7 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Like the mid-century look but want the plumbing done once? The Phoenix Vask SwitchMix Wall Basin / Bath Mixer Set 200mm Pin Up in Brushed Gold is a wall mounted mixer with a pin lever and a 200mm spout, in a rounded shape that suits timber vanities and plain tiles. This is the complete kit: the SwitchMix rough-in body for inside the wall and the fit-off set outside. The body stays, and a different Phoenix SwitchMix fit-off can go on later without touching the tiles. Lead free brass, push fit spout, backplates matched for diameter and depth. It measures 191.5mm wide, 218mm deep and 111.5mm high, and is WELS 5 star rated. Made in China. Warranty runs 15 years on the cartridge, 7 years on parts and finish, 1 year on labour. Also available in Chrome and Brushed Nickel.

• Complete kit: rough-in body and fit-off set in the one box for a new install
• SwitchMix body, which means a new finish later is a fit-off swap, not a rebuild
• Lead free brass composition, right for a tap over a basin you drink from
• 200mm spout reach, so it clears a basin or sits well over a bath
• WELS 5 star rated, so a wall set over the basin doesn't run up the water bill
• Brushed gold finish with 7 years of finish warranty
• Cartridge covered for 15 years, parts for 7 and labour for 1

Wall mounted. Your plumber sets the rough-in depth to suit your wall build-up, so have the tile thickness handy.

Already have the body in the wall? The Vask 200mm Pin Up Fit-Off Kit is the trim on its own.

Specifications

WELS water efficiency: 5 star
WELS registration number: T44775
Watermark certification: WMK25986
Construction material: Brass
Finish/coating: Brushed Gold
Dimensions: 191.5 x 218 x 111.5 mm (W x D x H)
Country of origin: China
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 7 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Replacing a shower mixer and want a slim handle this time? The Phoenix Teel SwitchMix Shower / Bath Diverter Mixer in Brushed Carbon is a slim, fine-lined mixer that sets the temperature and sends water to the shower or the bath spout. You get the complete kit in the box: the SwitchMix rough-in body for inside the wall plus the fit-off kit with the backplate, handle and trim. The rough-in stays put, and if you ever want a different look you fit a new SwitchMix fit-off kit from the front, no demolition. It's brass throughout with a solid brass backplate and a ceramic 180 degree diverter, 62mm wide, 109mm deep and 180mm high. Made in China. Backed by 15 years on the cartridge, 7 years on parts and finish and 1 year on labour. Also available in Brushed Nickel.

• Rough-in body and fit-off kit together in one box, ready for a new install or a full replacement
• SwitchMix design, so a future refresh is a new fit-off kit rather than a new wall
• Ceramic 180 degree diverter that moves water between two outlets with a half turn
• Slim 62mm wide body in brass with a solid brass backplate
• Brushed carbon finish backed by a 7 year finish warranty
• 15 year cartridge warranty, 7 years on parts, 1 year on labour
• WaterMark certified, made in China

Wall mounted. Your plumber will set the rough-in depth to suit your tile and sheet build-up, so check it before the wall is closed.

If you already have a SwitchMix diverter body in the wall, the Teel Fit-Off Kit on its own is all you need.

Specifications

Watermark certification: WMK25986
Construction material: Brass
Finish/coating: Brushed Carbon
Dimensions: 62 x 109 x 180 mm (W x D x H)
Country of origin: China
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 7 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Fitting a wall mixer and spout over a new basin or bath? The Phoenix Vask SwitchMix Wall Basin / Bath Mixer Set 200mm Pin Up in Chrome is a wall mounted mixer with a pin lever and a 200mm spout, in a rounded shape that suits timber vanities and plain tiles. This is the complete kit: the SwitchMix rough-in body for inside the wall and the fit-off set outside. The body stays, and a different Phoenix SwitchMix fit-off can go on later without touching the tiles. Lead free brass, push fit spout, backplates matched for diameter and depth. It measures 191.5mm wide, 218mm deep and 111.5mm high, and is WELS 5 star rated. Made in China. Warranty runs 15 years on the cartridge, 7 years on parts and finish, 1 year on labour. Also available in Brushed Gold and Brushed Nickel.

• Complete kit: rough-in body and fit-off set in the one box for a new install
• SwitchMix body, which means a new finish later is a fit-off swap, not a rebuild
• Lead free brass composition, right for a tap over a basin you drink from
• 200mm spout reach, so it clears a basin or sits well over a bath
• WELS 5 star rated, so a wall set over the basin doesn't run up the water bill
• Chrome finish with 7 years of finish warranty
• Cartridge covered for 15 years, parts for 7 and labour for 1

Wall mounted. Your plumber sets the rough-in depth to suit your wall build-up, so have the tile thickness handy.

Already have the body in the wall? The Vask 200mm Pin Up Fit-Off Kit is the trim on its own.

Specifications

WELS water efficiency: 5 star
WELS registration number: T44775
Watermark certification: WMK25986
Construction material: Brass
Finish/coating: Chrome
Dimensions: 191.5 x 218 x 111.5 mm (W x D x H)
Country of origin: China
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 7 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Going for a wall mixer and spout on a new vanity? The Phoenix Cromford SwitchMix Wall Basin / Bath Mixer Set in Matte Black puts a single lever mixer and a wall spout on a shared backplate, with a plain, workmanlike look. It's the complete kit, the SwitchMix rough-in body for the wall cavity and the fit-off set you see. Later, you can change the look with another SwitchMix fit-off set, without disturbing the tiles. The body is lead free brass. A free-flow aerator comes in the box for use over a bath, so filling isn't slow. It measures 185mm wide, 182mm deep and 80mm high, and is WELS 5 star rated. Made in China. Covered by a 15 year cartridge warranty, 7 years on parts and finish, 1 year on labour. Also available in Chrome and Brushed Nickel.

• Complete kit with the rough-in body and the fit-off set, which covers a new install or a full swap
• SwitchMix body so you can change the finish or design later without opening the wall
• Lead free brass composition for a replacement tap you can trust on drinking water
• Free-flow aerator in the box, so a bath fills at a decent rate
• WELS 5 star rated, so it keeps water use sensible over a basin
• Matte black finish with a 7 year finish warranty
• 15 years on the cartridge, 7 years on parts, 1 year on labour

Wall mounted over a basin or bath. Ask your plumber to set the rough-in height before the wall is sheeted.

Cromford sits alongside the other Phoenix SwitchMix wall sets, like Vask, if you're matching across rooms.

Specifications

WELS water efficiency: 5 star
WELS registration number: T44785
Watermark certification: WMK25986
Construction material: Brass
Finish/coating: Matte Black
Dimensions: 185 x 182 x 80 mm (W x D x H)
Country of origin: China
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 7 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want tapware with a bit of industrial character over the bath? The Phoenix Cromford SwitchMix Wall Basin / Bath Mixer Set in Brushed Nickel puts a single lever mixer and a wall spout on a shared backplate, with a plain, workmanlike look. It's the complete kit, the SwitchMix rough-in body for the wall cavity and the fit-off set you see. Later, you can change the look with another SwitchMix fit-off set, without disturbing the tiles. The body is lead free brass. A free-flow aerator comes in the box for use over a bath, so filling isn't slow. It measures 185mm wide, 182mm deep and 80mm high, and is WELS 5 star rated. Made in China. Covered by a 15 year cartridge warranty, 7 years on parts and finish, 1 year on labour. Also available in Chrome and Matte Black.

• Complete kit with the rough-in body and the fit-off set, which covers a new install or a full swap
• SwitchMix body so you can change the finish or design later without opening the wall
• Lead free brass composition for a replacement tap you can trust on drinking water
• Free-flow aerator in the box, so a bath fills at a decent rate
• WELS 5 star rated, so it keeps water use sensible over a basin
• Brushed nickel finish with a 7 year finish warranty
• 15 years on the cartridge, 7 years on parts, 1 year on labour

Wall mounted over a basin or bath. Ask your plumber to set the rough-in height before the wall is sheeted.

Cromford sits alongside the other Phoenix SwitchMix wall sets, like Vask, if you're matching across rooms.

Specifications

WELS water efficiency: 5 star
WELS registration number: T44785
Watermark certification: WMK25986
Construction material: Brass
Finish/coating: Brushed Nickel
Dimensions: 185 x 182 x 80 mm (W x D x H)
Country of origin: China
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 7 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Wall mounted taps over the basin or bath due for a change? The Phoenix Cromford SwitchMix Wall Basin / Bath Mixer Set in Chrome puts a single lever mixer and a wall spout on a shared backplate, with a plain, workmanlike look. It's the complete kit, the SwitchMix rough-in body for the wall cavity and the fit-off set you see. Later, you can change the look with another SwitchMix fit-off set, without disturbing the tiles. The body is lead free brass. A free-flow aerator comes in the box for use over a bath, so filling isn't slow. It measures 185mm wide, 182mm deep and 80mm high, and is WELS 5 star rated. Made in China. Covered by a 15 year cartridge warranty, 7 years on parts and finish, 1 year on labour. Also available in Matte Black and Brushed Nickel.

• Complete kit with the rough-in body and the fit-off set, which covers a new install or a full swap
• SwitchMix body so you can change the finish or design later without opening the wall
• Lead free brass composition for a replacement tap you can trust on drinking water
• Free-flow aerator in the box, so a bath fills at a decent rate
• WELS 5 star rated, so it keeps water use sensible over a basin
• Chrome finish with a 7 year finish warranty
• 15 years on the cartridge, 7 years on parts, 1 year on labour

Wall mounted over a basin or bath. Ask your plumber to set the rough-in height before the wall is sheeted.

Cromford sits alongside the other Phoenix SwitchMix wall sets, like Vask, if you're matching across rooms.

Specifications

WELS water efficiency: 5 star
WELS registration number: T44785
Watermark certification: WMK25986
Construction material: Brass
Finish/coating: Chrome
Dimensions: 185 x 182 x 80 mm (W x D x H)
Country of origin: China
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 7 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Shower mixer worn out and you want one that can change with the bathroom later? The Phoenix Mekko SwitchMix Shower / Bath Diverter Mixer in Chrome has a soft-edged handle and a built-in diverter: one way for the shower, the other for the bath. The box holds the complete kit, the SwitchMix rough-in body for the wall and the fit-off kit, which is the plate, handle and trim you see. Because the body is SwitchMix, you can swap the fit-off for another SwitchMix collection or finish later without cutting the tiles. Solid brass backplate, ceramic 180 degree rotary diverter, 65mm wide, 122mm deep and 178mm high. Made in China. Warranty is 15 years on the cartridge, 7 years on parts and finish, 1 year on labour. Also available in Brushed Carbon.

• Complete kit with the in-wall rough-in body and the visible fit-off kit, so your plumber has everything in one box
• SwitchMix body, which lets you change the handle and plate later without opening the wall
• Ceramic 180 degree rotary diverter to swap between the shower and the bath spout with one turn
• Solid brass backplate for a firm, long lasting fix to the wall
• Chrome finish covered by a 7 year finish warranty
• 15 year cartridge warranty, 7 years on parts and 1 year on labour
• WaterMark certified and 65 x 122 x 178mm overall

Wall mounted, for use with a separate shower outlet and bath spout. Ask your plumber to confirm the rough-in depth before the tiles go on.

It shares the SwitchMix system with other Phoenix collections such as Teel, so the fit-offs can be swapped between them.

Specifications

Watermark certification: WMK25901
Construction material: Solid brass backplate
Finish/coating: Chrome
Dimensions: 65 x 122 x 178 mm (W x D x H)
Country of origin: China
Warranty: 15 Year Cartridge Warranty, 7 Year Product or Parts Warranty, 7 Year Finish Warranty, 1 Year Labour Warranty

What's In The Box

Warranty

Phoenix Tapware products are covered by warranties of up to a Lifetime*

Phoenix Tapware warrants that the products manufactured by Phoenix Tapware for any consumers who use them in any residential home will be free from defects in materials or workmanship for the periods specified below (each period commencing on the date of purchase, or for new buildings, the date of handover).

Showers

• LuxeXP – Lifetime replacement products or parts, 1 year labour
• NX Showers – Lifetime replacement products or parts, 1 year labour
• Standard Showers – 15 Years replacement product or parts, 1 year labour
• Coloured Finish – Lifetime on NX & LuxeXP showers, 3 Years on standard showers

Sinks

• Stainless Steel Sinks – Lifetime on sink structure, 3 years on coloured stainless steel sinks, 1 year replacement parts & labour, 1 year sink waste
• Quartz Resin Sinks – Lifetime on sink structure and finish, 1 year replacement parts & labour, 1 year sink waste

Accessories

• Standard Finish – 7 Years replacement product or parts
• Coloured Finish – 7 Years replacement product or parts

Wastes & Traps

• 1 Year replacement product or parts

Should any warranty claim be made and service attended to by a Phoenix authorised Service Agent whereby the installation has been assessed as an installation fault and not a product fault, or from some other cause other than a manufacturing defect, Phoenix reserves the right to charge a service fee for attending and/or any work carried out.

To view the Phoenix Warranty Document, click here.

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Want to lose the chrome button on a white cistern? The Raymor Cistern Dual Flush Button in Black is the replacement button for every Raymor back to wall and close coupled toilet suite, so it fits the Edge II, Alpha, Atlanta, Winton and Classic cisterns. It's a plastic button with the full and half flush split across the two halves, finished in black to tie the toilet in with your taps and accessories. It's the simplest way to change the look of a toilet you're otherwise happy with, and it's the part to order when the old button has cracked or stopped springing back. Raymor covers the button and finish for 5 years. Also available in Chrome, Brushed Nickel, Gloss White.

• Fits all Raymor back to wall and close coupled suites: Edge II, Alpha, Atlanta, Winton and Classic
• Dual flush button, full and half flush on the two halves
• Black finish on a plastic button, so it matches Raymor tapware in the same colour
• Replaces a cracked, sticking or faded button without touching the cistern
• 5 year warranty on the button and finish
• Button and installation instructions in the box

Lift the cistern lid, unscrew the old button and thread the new one in: a few minutes with no tools beyond your hands. Not for in-wall cisterns, which take a wall plate instead.

Match it with Raymor basin and shower mixers in the same finish, or order it alongside a Raymor Edge II or Winton toilet suite.

Specifications

Construction material: Plastic
Finish/coating: Black
Overall height: 230 mm
Overall width: 70 mm
Overall depth: 70mm
Suits: All Raymor back to wall and close coupled toilet suites (Edge II, Alpha, Atlanta, Winton, Classic)
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Fitting out a dark bathroom? The Raymor Round Wall Dual Flush Button Plate in Matte Black is a plastic plate in matte black, so it sits flat against a dark tile or feature wall without a chrome ring breaking it up. It measures 236mm wide by 152mm high and sits 8mm off the wall, with two round buttons for the full and half flush. It fits the Raymor in-wall cisterns 133137 and 133141, so it's the plate for an Edge II or Byron wall faced pan on a Raymor cistern, and it's also what you'd buy to replace a tired plate on one of those cisterns. Raymor covers the button and finish for 5 years. Also available in Chrome, Brushed Nickel, Gloss White, Stainless Steel.

• Fits Raymor in-wall cisterns 133137 and 133141 only, so check the cistern code before you order
• 236mm x 152mm plate, 8mm thick, with two round buttons for full and half flush
• Matte Black finish on a plastic plate, wiped clean with a soft cloth and soapy water
• Straight swap for an existing Raymor round plate when the old one is scratched or yellowed
• 5 year warranty on the flush button and finish
• Flush plate and installation instructions in the box

Clips onto the cistern access frame, so swapping a plate is a quick job you can do yourself. A new cistern install is a job for your plumber.

Order it with the Raymor In-Wall Cistern and an Edge II Wall Faced Rimless Pan, or match it to Raymor tapware in the same finish.

Specifications

Construction material: Plastic
Finish/coating: Matte Black
Overall height: 152 mm
Overall width: 236 mm
Plate thickness: 8mm
Suits: Raymor in-wall cisterns 133137 and 133141
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want the flush plate to be real metal? The Raymor Round Wall Dual Flush Button Plate in Stainless Steel is a brushed stainless steel plate, which is the one to pick if you want metal rather than a coated finish. It measures 236mm wide by 152mm high and sits 11.5mm off the wall, with two round buttons for the full and half flush. It fits the Raymor in-wall cisterns 133137 and 133141, so it's the plate for an Edge II or Byron wall faced pan on a Raymor cistern, and it's also what you'd buy to replace a tired plate on one of those cisterns. Raymor covers the button and finish for 5 years. Also available in Chrome, Matte Black, Brushed Nickel, Gloss White.

• Fits Raymor in-wall cisterns 133137 and 133141 only, so check the cistern code before you order
• 236mm x 152mm plate, 11.5mm thick, with two round buttons for full and half flush
• Brushed stainless steel, wiped clean with a soft cloth and soapy water
• Straight swap for an existing Raymor round plate when the old one is scratched or yellowed
• 5 year warranty on the flush button and finish
• Flush plate and installation instructions in the box

Clips onto the cistern access frame, so swapping a plate is a quick job you can do yourself. A new cistern install is a job for your plumber.

Order it with the Raymor In-Wall Cistern and an Edge II Wall Faced Rimless Pan, or match it to Raymor tapware in the same finish.

Specifications

Construction material: Stainless Steel
Finish/coating: Stainless Steel
Overall height: 152 mm
Overall width: 236 mm
Plate thickness: 11.5mm
Suits: Raymor in-wall cisterns 133137 and 133141
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Want the flush plate to disappear into a white wall? The Raymor Round Wall Dual Flush Button Plate in Gloss White is a plastic plate in gloss white, which all but disappears on a white tiled wall. It measures 236mm wide by 152mm high and sits 8mm off the wall, with two round buttons for the full and half flush. It fits the Raymor in-wall cisterns 133137 and 133141, so it's the plate for an Edge II or Byron wall faced pan on a Raymor cistern, and it's also what you'd buy to replace a tired plate on one of those cisterns. Raymor covers the button and finish for 5 years. Also available in Chrome, Matte Black, Brushed Nickel, Stainless Steel.

• Fits Raymor in-wall cisterns 133137 and 133141 only, so check the cistern code before you order
• 236mm x 152mm plate, 8mm thick, with two round buttons for full and half flush
• Gloss White finish on a plastic plate, wiped clean with a soft cloth and soapy water
• Straight swap for an existing Raymor round plate when the old one is scratched or yellowed
• 5 year warranty on the flush button and finish
• Flush plate and installation instructions in the box

Clips onto the cistern access frame, so swapping a plate is a quick job you can do yourself. A new cistern install is a job for your plumber.

Order it with the Raymor In-Wall Cistern and an Edge II Wall Faced Rimless Pan, or match it to Raymor tapware in the same finish.

Specifications

Construction material: Plastic
Finish/coating: Gloss White
Overall height: 152 mm
Overall width: 236 mm
Plate thickness: 8mm
Suits: Raymor in-wall cisterns 133137 and 133141
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Need the plate to match chrome taps? The Raymor Round Wall Dual Flush Button Plate in Chrome is a chrome plated plastic plate, the plain choice that goes with chrome tapware and most tiles. It measures 236mm wide by 152mm high and sits 8mm off the wall, with two round buttons for the full and half flush. It fits the Raymor in-wall cisterns 133137 and 133141, so it's the plate for an Edge II or Byron wall faced pan on a Raymor cistern, and it's also what you'd buy to replace a tired plate on one of those cisterns. Raymor covers the button and finish for 5 years. Also available in Matte Black, Brushed Nickel, Gloss White, Stainless Steel.

• Fits Raymor in-wall cisterns 133137 and 133141 only, so check the cistern code before you order
• 236mm x 152mm plate, 8mm thick, with two round buttons for full and half flush
• Chrome finish on a plastic plate, wiped clean with a soft cloth and soapy water
• Straight swap for an existing Raymor round plate when the old one is scratched or yellowed
• 5 year warranty on the flush button and finish
• Flush plate and installation instructions in the box

Clips onto the cistern access frame, so swapping a plate is a quick job you can do yourself. A new cistern install is a job for your plumber.

Order it with the Raymor In-Wall Cistern and an Edge II Wall Faced Rimless Pan, or match it to Raymor tapware in the same finish.

Specifications

Construction material: Plastic
Finish/coating: Chrome
Overall height: 152 mm
Overall width: 236 mm
Plate thickness: 8mm
Suits: Raymor in-wall cisterns 133137 and 133141
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Flush button cracked, stuck or gone dull? The Raymor Cistern Dual Flush Button in Chrome is the replacement button for every Raymor back to wall and close coupled toilet suite, so it fits the Edge II, Alpha, Atlanta, Winton and Classic cisterns. It's a plastic button with the full and half flush split across the two halves, finished in chrome to tie the toilet in with your taps and accessories. It's the simplest way to change the look of a toilet you're otherwise happy with, and it's the part to order when the old button has cracked or stopped springing back. Raymor covers the button and finish for 5 years. Also available in Black, Brushed Nickel, Gloss White.

• Fits all Raymor back to wall and close coupled suites: Edge II, Alpha, Atlanta, Winton and Classic
• Dual flush button, full and half flush on the two halves
• Chrome finish on a plastic button, so it matches Raymor tapware in the same colour
• Replaces a cracked, sticking or faded button without touching the cistern
• 5 year warranty on the button and finish
• Button and installation instructions in the box

Lift the cistern lid, unscrew the old button and thread the new one in: a few minutes with no tools beyond your hands. Not for in-wall cisterns, which take a wall plate instead.

Match it with Raymor basin and shower mixers in the same finish, or order it alongside a Raymor Edge II or Winton toilet suite.

Specifications

Construction material: Plastic
Finish/coating: Chrome
Overall height: 230 mm
Overall width: 70 mm
Overall depth: 70mm
Suits: All Raymor back to wall and close coupled toilet suites (Edge II, Alpha, Atlanta, Winton, Classic)
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Old shower tap spinning loose on the wall? The Nero Ecco Shower Mixer 80mm Round Plate in Brushed Gold puts shower temperature and flow on one control, mounted on a neat 80mm round metal plate. Inside is a 35mm ceramic cartridge that can be set to limit temperature and flow, saving energy over time. The body is brass. It comes as a universal body plus trim kit, packed separately, and the trim can be swapped out later. Connections are 1/2 inch BSP female, for mains pressure systems. No WELS rating applies to this mixer. There's a 15 year warranty from Nero. Also available in Brushed Nickel, Chrome and Matte Black.

• 80mm round metal wall plate that gives a tidy finish on the tiles
• Adjustable 35mm ceramic cartridge, so you can cap temperature and flow and save energy
• Brass body built for years of daily showers
• Body and trim come in separate packs, so the body goes in first and the trim once the tiling's done
• Replaceable trim, which makes a future finish change easy
• Trim finished in brushed gold to match the rest of your shower
• 15 year warranty from Nero

Check the round plate covers the hole left by your old tap, and ask your plumber if you're unsure.

The Nero Ecco Fixed Bath Spout Only matches it if you're doing the bath as well.

Specifications

Finish: Brushed Gold
Material: Brass
Dimensions (W x D x H): 80 x 110 x 128mm
WaterMark licence: WM-060073
Warranty: 15 years

What's In The Box

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Tapware in brushed nickel but the toilet button still chrome? The Raymor Cistern Dual Flush Button in Brushed Nickel is the replacement button for every Raymor back to wall and close coupled toilet suite, so it fits the Edge II, Alpha, Atlanta, Winton and Classic cisterns. It's a plastic button with the full and half flush split across the two halves, finished in brushed nickel to tie the toilet in with your taps and accessories. It's the simplest way to change the look of a toilet you're otherwise happy with, and it's the part to order when the old button has cracked or stopped springing back. Raymor covers the button and finish for 5 years. Also available in Chrome, Black, Gloss White.

• Fits all Raymor back to wall and close coupled suites: Edge II, Alpha, Atlanta, Winton and Classic
• Dual flush button, full and half flush on the two halves
• Brushed Nickel finish on a plastic button, so it matches Raymor tapware in the same colour
• Replaces a cracked, sticking or faded button without touching the cistern
• 5 year warranty on the button and finish
• Button and installation instructions in the box

Lift the cistern lid, unscrew the old button and thread the new one in: a few minutes with no tools beyond your hands. Not for in-wall cisterns, which take a wall plate instead.

Match it with Raymor basin and shower mixers in the same finish, or order it alongside a Raymor Edge II or Winton toilet suite.

Specifications

Construction material: Plastic
Finish/coating: Brushed Nickel
Overall height: 230 mm
Overall width: 70 mm
Overall depth: 70mm
Suits: All Raymor back to wall and close coupled toilet suites (Edge II, Alpha, Atlanta, Winton, Classic)
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

After a warm metallic finish without the shine? The Raymor Round Wall Dual Flush Button Plate in Brushed Nickel is a plastic plate in brushed nickel, a softer look than chrome that hides fingerprints better. It measures 236mm wide by 152mm high and sits 8mm off the wall, with two round buttons for the full and half flush. It fits the Raymor in-wall cisterns 133137 and 133141, so it's the plate for an Edge II or Byron wall faced pan on a Raymor cistern, and it's also what you'd buy to replace a tired plate on one of those cisterns. Raymor covers the button and finish for 5 years. Also available in Chrome, Matte Black, Gloss White, Stainless Steel.

• Fits Raymor in-wall cisterns 133137 and 133141 only, so check the cistern code before you order
• 236mm x 152mm plate, 8mm thick, with two round buttons for full and half flush
• Brushed Nickel finish on a plastic plate, wiped clean with a soft cloth and soapy water
• Straight swap for an existing Raymor round plate when the old one is scratched or yellowed
• 5 year warranty on the flush button and finish
• Flush plate and installation instructions in the box

Clips onto the cistern access frame, so swapping a plate is a quick job you can do yourself. A new cistern install is a job for your plumber.

Order it with the Raymor In-Wall Cistern and an Edge II Wall Faced Rimless Pan, or match it to Raymor tapware in the same finish.

Specifications

Construction material: Plastic
Finish/coating: Brushed Nickel
Overall height: 152 mm
Overall width: 236 mm
Plate thickness: 8mm
Suits: Raymor in-wall cisterns 133137 and 133141
Country of origin: China
Warranty: 5 years on the flush button and PVD or electroplate finish (Raymor Product Warranty Jan 2025)

What's In The Box

Warranty

Raymor products are covered by warranties of up to 25 years*

Raymor is Tradelink's own brand, designed for Australian homes and backed by Tradelink. In addition to your rights under the Australian Consumer Law, Raymor products carry an extended warranty against genuine manufacturing defects in normal domestic use, starting from the date of purchase (or handover for new homes). If a covered fault appears within the warranty period, Tradelink will, at its choice, repair or replace the faulty product or component.

Mixers

• Cartridge, body, spout, handle, aerator, braided hoses and chrome finish: 20 Years
• Handpieces, pull-out and pull-down hoses, PVD and electroplated finishes: 10 Years
• Seals and labour: 1 Year

Three Piece Tapware

• Ceramic disc and spindle assemblies, body, spout, flanges, handles, aerators, fittings and chrome finish: 15 Years
• PVD and electroplated finishes: 5 Years
• Seals, jumper valves and labour: 1 Year

Showers

• Brass body, wall elbow, shower arm, rail, hose, shower head, handpiece, slide bracket, diverter, soap dish and chrome finish: 20 Years
• PVD and electroplated finishes: 5 Years
• Seals and labour: 1 Year

Toilets

• Vitreous china, braided flexible hoses and chrome finish: 20 Years
• Plastic cistern and in-wall cistern frame: 15 Years
• Inlet and outlet valves, toilet seat, link piece, flush pipe, flush button, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Basins

• Vitreous china: 20 Years
• Plug and waste, overflow ring, bottle trap, finishes and fittings: 5 Years
• Seals and labour: 1 Year

Sinks & Tubs

• Sink and tub body: 25 Years
• Cabinet, wastes, clips, bypass kit and hoses: 5 Years
• Seals and labour: 1 Year

Vanities

• Vitreous china top: 20 Years
• Polymarble top, cabinet, handles, runners and hinges: 10 Years
• Plug and waste, overflow ring and finishes: 5 Years
• Seals and labour: 1 Year

Ascot & Mosman Vanities (made in Australia by ADP)

• Cabinet and mirrored cabinets (excluding mirror): 10 Years
• Hardware, runners and hinges: 7 Years
• Vitreous china top: 5 Years
• Mirrors, plug and waste, overflow rings, seals and labour: 1 Year

Accessories

• Main body, chrome finish and fittings: 10 Years
• PVD and electroplated finishes: 5 Years
• Seals: 1 Year

Spare Parts & Components

• Spare parts and components sold separately (such as wastes, traps and toilet seats): 1 Year, replacement parts only

Some Raymor ranges are covered by their maker's own warranty, including Raymor baths, Care grab rails and shower seats, and Raymor water filters and filter cartridges. The warranty for these is shown in the product specifications. The warranty applies to the original purchaser and requires installation by a licensed plumber in line with Australian Standards and the installation instructions. It does not cover fair wear and tear, damage from harsh or abrasive cleaners, water pressure above 500kPa, debris in the water supply, or incorrect installation or use. Commercial food service settings are excluded.

For warranty enquiries, contact us with your order number and a photo of the fault and we will arrange the claim for you. For the full Raymor warranty terms click here.

Need a shower mixer that's easier to use with limited grip? The Nero Dolce Care Shower Mixer in Matte Black has an extended lever handle made for people with restricted movement and for care facilities. Its design complies with AS1428.1 2009 Amendment 1 for access and mobility. Inside is a 35mm ceramic disc cartridge you can set to cap the water temperature and flow, which also saves energy. The body is solid brass for a long working life, and it's suited to mains pressure. You get the mixer, plate and handle, and it measures 80mm wide, 112mm deep and 188.5mm high. Warranty is 15 years.

• Extended lever handle that's easier to operate with limited grip or reach
• Designed to AS1428.1 2009 Amendment 1 access and mobility requirements
• 35mm ceramic disc cartridge with adjustable limits, so you can keep the hot water to a comfortable maximum
• Solid brass construction for a long service life
• Suits mains pressure installations
• Mixer, plate and handle supplied together
• 15 year warranty

Check your home runs on mains pressure, and ask your plumber to confirm it suits your existing shower plumbing.

Pair it with other Nero Dolce tapware for a consistent look across the bathroom.

Specifications

Finish: Matte Black
Material: Brass
Dimensions (W x D x H): 80 x 112 x 188.5mm
WaterMark licence: WM-060073
Warranty: 15 years

What's In The Box

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages

Shower mixer dripping or stiff to turn? The Nero Ecco Shower Mixer in Brushed Gold is a straightforward wall mixer that looks after temperature and flow for your shower. There's no diverter, so it suits a shower on its own rather than a shower over bath. The cartridge is 35mm ceramic, and your plumber can adjust its settings to save energy. It's a brass body with 1/2 inch BSP female inlets behind a metal plate built for a long life. Body and trim arrive in two packs, and if you fancy a different handle later, the trim swaps out. Made for mains pressure. It carries a 15 year warranty. Also available in Brushed Nickel, Chrome, Gun Metal and Matte Black.

• Adjustable 35mm ceramic cartridge for setting temperature and flow, saving energy
• Metal wall plate for a longer service life in a wet room
• 1/2 inch BSP female inlets on the brass body, a standard fit for your plumber
• Replaceable trim kit, handy if you update the bathroom later
• brushed gold finish with a 15 year warranty

Mains pressure only, so get your plumber to look over the current setup first.

Pair it with the Nero Bianca Twin Shower or a Nero ceiling arm and shower head.

Specifications

Finish: Brushed Gold
Material: Brass
Dimensions (W x D x H): 65 x 107.3 x 150mm
WaterMark licence: WM-060073
Warranty: 15 years

What's In The Box

Warranty

Nero offers up to 25 Year Residential Warranty as outlined below.

Nero Tapware is committed to providing high-quality products designed to meet the highest industry standards. Our warranty reflects our confidence in the durability and reliability of our products.

Premium Ranges

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Tapware: 

• 25 years replacement cartridge only
• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Zen, Opal, York, Bianca, Mecca & Mecca Care Showers:

• 25 years replacement products or parts on all finishes
• 25 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 2 years replacement products or parts & labour

Zen, Opal, Kara, York, Bianca, Mecca & Mecca Care Bathroom Accessories:

•  25 years replacement products or parts on all finishes

Heated Towel Rails:

• 25 years replacement products or parts on all finishes
• 1 year on power transformer (replacement only)

Electronic Mixers / Taps & Push Taps:

• 25 years replacement products or parts on all finishes
• 2 years replacement products or parts & labour

Standard Ranges (if not detailed in table above)

Mixer Taps:

• 15 years replacement cartridge only
• 10 years replacement products or parts on all finishes
• 10 years on washing machine stops (replacement only)
• 1 year replacement products or parts & labour

Showers:

• 10 years replacement products or parts on all finishes
• 10 years on hand showers, shower heads, shower hoses replacement only (labour not included)
• 1 year replacement products or parts & labour

Bath Outlets:

• 10 years replacement products or parts only on all finishes

Bathroom Accessories:

• 10 years replacement products or parts only on all finishes

Other Accessories:

• 10 years on universal pop-up waste (replacement only)
• 10 years on bottle trap (replacement only)
• 10 years on glass hardware (replacement only)
• 10 years product replacement and 1 year labour on toilet push plate only
• 10 years product replacement and 1 year labour on cistern only
• 10 years on floor wastes (replacement only)

The warranty period commences from date of purchase or, for new buildings, date of handover. To make a warranty claim, proof of purchase, handover documentation for new homes or equivalent documentation must be supplied for warranty claims to be considered.

Nero also offer generous warranty periods for commercial installations. To view these warranty periods and for their full warranty document click here

• Delivery insurance is included on all product deliveries. Please note, goods need to be inspected within 24 hours of delivery for breakages